City Of Baguio Tender

Description 15 Units 4” Ø Check Valve, Non-slam 100mm Connections: Flanged Iso 7005 Or Ansi B16; Pressure Range: Model 31, 32:7-360 Psi Max. Water Temp.: 80oc Or 180of Body And Cover: Ductile Iron Ggg50 (astm A-536) Main Valve Internal: Sst, Bronze And Coated Steel Diaphragm: Nylon Fabric Reinforced Epdm Seals: Nbr Approved Budget Cost: ₱282,700.00 / Pc 4 Units 3” Ø Check Valve, Non-slam 75mm Connections: Flanged Iso 7005 Or Ansi B16; Pressure Range: Model 31, 32:7-360 Psi Max. Water Temp.: 80°c Or 180°f Body And Cover: Ductile Iron Ggg50 (astm A-536) Main Valve Internal: Sst, Bronze And Coated Steel Diaphragm: Nylon Fabric Reinforced Epdm Seals: Nbr Approved Budget Cost: ₱213,840.00 / Pc 1 Unit 6” Ø Gate Valve, Flanged Type With Companion Flanges, And Bng, Working Pressure Capable Up To 250 Psi (please See Complete Specification Below) Approved Budget Cost: ₱36,965.00 / Piece 12 Units 4” Ø Gate Valve, Flanged Type With Companion Flanges, And Bng, Working Pressure Capable Up To 250 Psi (please See Complete Specification Below) Approved Budget Cost: ₱16,048.00 / Piece Design Standard: Design Code: Hydraulic Test To Bs 5163 Maximum Pressure: Pn25 Inspection And Test Std.: Iso5208-1982 Or Acs Certificate 18 Acc Ny 369 Face To Face: En 558 Or Bs5163 Flange Drilling: En1092 Or En1092-2, Iso 7005-2 Materials: Body: Ductile Iron Gjs-500-7 Or Ggg50 Wedge Core: Ductile Iron (di) Wedge Rubber: Epdm Rubber Wedge Nut: Brass Stem: Stainless Steel 420 Bonnet Bolt: Steel, Zinc Plated Or Q235a Bonnet: Ductile Iron (di) O-ring: Nbr Rubber Thrust Collar: Brass Handwheel/stem Cap: Ductile Iron (di) Size / Dn Length (l) Mm Height (h) Mm Width Or D Mm Weight Kgs Dn100 (4”) 229 320-324 235 21-29 Dn150 (6”) 267 400-429 300 35-51 11 Pieces 2” Ø Air Release Valve Pn16 - The Valve Shall Consist Of Two Floats (the Bottom And The Upper Float), The Bottom Float Drops And Allowing The Trapped Air To Be Vented Through The Small Nozzle At The Center Of The Top Float. - The Float Shall Have A Float Guide On Two Sides. - The Valve Shall Be Made Of Cast Iron/ Ductile Iron With Glass Reinforced Plastic (grp) Inner Body. - Float Body Shall Be Made Of Polypropylene And It Should Be Cylindrical/ Trapezoid In Design. Description Materials Base Brass Oring Nbr Automatic Float Foamed Polypropylene Automatic Seal Epdm Bonnet Pa6+30gf Drainage Polypropylene Id Plate Al Metallic Cover Cast Iron Dimensions And Weight 2” Ø Height (h) 259.50 Mm Width (w) 214 Mm Thread (d) 2” (bsp / Npt) Nozzle Area (a) 12.85mm2 Total Width (l) - Drainage Diameter (e) 1 ½” Bsp Kinetic Nozzle Area (k) 908 Mm Flange Iso16/25 / Ansi150 Weight 9 Kgs. Approved Budget Cost: ₱24,750.00 / Pc X X X X X Note: Not To Be Purchased On A One (1) Lot Basis This Is A Two (2) Envelope System: Envelope “a” To Contain The Following, Among Others: A) A Refundable Bid Bond In The Form Of Cash, A Manager's Or Cashier's Check Equivalent To 2%, Or A Surety Bond Callable On Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission Equivalent To 5% Of The Total Approved Budget Cost Is Required For A Total Purchase Bid Amount Of ₱ 50,000.00 And Above. The Validity Of The Surety Bond Is 120 Days From The Date Of Opening Of Bids Or Bid Securing Declaration, Regardless Of The Amount Of Bid. B) Terms Of Payment, Delivery, Warranty, Bid Validity, And Complete Specifications; C) Brochure(s) (original); D) Proof Of Payment Of A Non-refundable Fee Of ₱10,000.00; Otherwise, Bids Shall Not Be Opened E) Certificate Of Authorized Distributorship Or Dealership Issued By The Principal Supplier To The Participating Bidder (with Red Ribbon) If None Has Been Submitted To The Bac In Its Accreditation; -for Bidders Who Have Principal Foreign Suppliers, The Bwd-bac Shall Accept An Apostilled Certificate Of Authorized Distributorship Or Dealership Issued By A Competent Authority Of The Host Government In Lieu Of The Certificate Of Authorized Distributorship Or Dealership (with Red Ribbon), Except For Non-contracting Countries To The Apostille Convention, Which Still Require The Red Ribbon Requirement. -for Locally Produced Or Manufactured Products, Only A Certificate Of Authorized Distributorship Or Dealership Without A Red Ribbon Is Required, If Applicable. F) Iso Certificate Issued To The Principal Supplier Or Participating Bidder For The Offered Material Or Equipment Brand Name (if None Has Been Submitted To The Bac In Its Accreditation); G) International Certificate Of Warranty Envelope “b” To Contain The Bid Cost Per Unit.