City Of Baguio Tender

Description 2 Sets Vertical Centrifugal Pump And Motor Motor Requirement • Type: Induction • Hp Rating: 30 Hp • Nominal Voltage: 230v / 460v • Supply Frequency: 60hz • Nominal Speed: 3600 Rpm • Number Of Phase: 3 • Insulation Class: F • Efficiency At Full Load: Not Less Than 90% • Enclose Class: Tefc Coupled And Aligned With Heavy Duty Mounting Base To: Pump Requirement: • Capacity: 150 Usgpm • Tdh: 500 Feet Construction Material • Shaft Seal: Cartridge Type • Shaft Seal Material: Hqqe • Pump Head: Stainless Steel • Pump Shaft: Stainless Steel • Impeller: Stainless Steel • Chamber: Stainless Steel • Outer Sleeve: Stainless Steel • Base: Stainless Steel • Neck Ring: Peek • Support Bearing: Graflon • Bearing Rings: Tungsten Carbide • Pump Efficiency: Not Less Than 75% At Rated Capacity Complete With Motor Control Variable Frequency Drive Adaptable To 40hp, 230v / 460v,3 Phase, 60hz Submersible Motor Capacity Of Pressure Transmitter: 0 – 25 Bars Control Body: Ip 65 Rated Minimum Standard Specifications For Variable Frequency Drive 1 Main Supply (l1, L2, L3) Supply Voltage 3 X 380-480v Ac Or As Specified By End-user Supply Frequency 60 Hz Displacement Power Factor > 0.98 True Power Factor 0.9 Switching On Input Supply L1, L2, L3 1 – 2 Times / Minute 2 Output Data (u, V, W) Output Voltage 0 - 100% Switching On Output Unlimited Ramp Times 0.1 – 3600 Seconds Maximum Output Frequency 590 Hz 3 Digital Inputs Programmable Digital Inputs 6 Logic Pnp Voltage Level 0 – 24v Dc 4 Analogue Inputs Number Of Analogue Inputs 2 Modes Current Voltage Level - 10 To +10 (scaleable) Current Level 0/4 To 20ma (scaleable) 5 Pulse Inputs Programmable Pulse Inputs 2 Voltage Level 0-24v Dc (pnp Positive Logic) Pulse Input Accuracy Max. Error: 0.1% Of Full Scale 6 Analogue Output Programmable Analogue Outputs 1 Current Range At Analogue Output 0-4 - 20ma 7 Relay Outputs Programmable Relay Outputs 2 8 Fieldbus Communication Ethernet Ip 9 Ambient Temperature Up To 55°c 10 Hardware Specifications Ip 55 Enclosure 11 Other Accessories Pressure Transmitter ______bars - For On-site Delivery - Supplier To Provide High Tensile Mounting Bolts For Pump Base - Supplier To Provide Bng And Flanges For Both Suction And Discharge Ports - Supplier To Provide Manufacturer Pump Test Result Upon Delivery - Supplier To Provide Brochure With Full Specification And Pump Curve Of Offered Booster Pump Approved Budget Cost: ₱1,222,000.00 / Set X X X X X This Is A Two (2) Envelope System: Envelope “a” To Contain The Following; Among Others: A) A Refundable Bid Bond In The Form Of Cash, Manager's Or Cashier's Check Equivalent To 2% Or Surety Bond Callable On Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission Equivalent To 5% Of The Total Approved Budget Cost Is Required For A Total Purchase Bid Amount Of ₱ 50,000.00 And Above. Validity Of The Surety Bond Is 120 Days From The Date Of Opening Of Bids Or Bid Securing Declaration Regardless Of Amount Of Bid; B) Terms Of Payment, Delivery, Warranty, Bid Validity And Complete Specifications; C) Brochure/s (original); D) Proof Of Payment Of A Non-refundable Fee Of ₱5,000.00; Otherwise, Bids Shall Not Be Opened E) Certificate Of Authorized Distributorship / Dealership Issued By The Principal Supplier To The Participating Bidder (with Red Ribbon) If None Has Been Submitted To The Bac In Its Accreditation; ◦ For Bidders Who Have Foreign Principal Suppliers, The Bwd-bac Shall Accept An Apostilled Certificate Of Authorized Distributorship / Dealership Issued By A Competent Authority Of The Host Government In Lieu Of The Certificate Of Authorized Distributorship / Dealership (with Red Ribbon), Except For Non-contracting Countries To The Apostille Convention, Which Still Require The Red Ribbon Requirement. ◦ For Locally Produced / Manufactured Products, Only A Certificate Of Authorized Distributorship / Dealership W/o Red Ribbon Is Required If Applicable; F) Iso Certificate Issued To The Principal Supplier/participating Bidder For The Offered Material Or Equipment Brand Name (if None Has Been Submitted To The Bac In Its Accreditation); G) International Certificate Of Warranty. Envelope “b” To Contain The Bid Cost Per Unit.