- Home/
- Philippines/
- City Government Iligan/
- Overview
City Government Iligan Tender
City Government Iligan Tender
Costs
Summary
Cb(b)-24-016 (ceo-infra) Completion Of Bac/new City Mayor's Office Building, Pala-o, Ilgan City , Construction Projects ,city Of Iligan, Lanao Del Norte
Description
Description Invitation To Bid The Iligan City Government Bids And Awards Committee (bac), Through 20% Development Fund 2024, Intend To Apply The Sum Of P 3,738,263.14 Being The Approved Budget For The Contract (abc) To Payments Under The Contract Completion Of Bac/new City Mayor’s Office Building, Brgy. Palao, Iligan City With Project No. Cb(b)-24-016 (ceo-infra). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Iligan City Government Bids And Awards Committee Now Invites For The Supply And Delivery Of Items Below-stated: Particulars : Completion Of Bac/new City Mayor's Office Bldg., Brgy. Pala-o, Iligan City Scope Of Work: General Requirements • Installation Of Project Billboard • Occupational Saftey And Health Program • Mobilization And Demobilization Removal Of Structures And Obstruction • Demolition Of Chb Wall At Chief Of Staff Office And For Window Installation At Basement • Removal Of Glass Wall Partition At 1st, 2nd, And 3rd Floor • Replace Sliding Window To Fixed Window (3rd Floor, Front Side) • Removal Of Ceramic Tiles At Stair Entrance • Removal Of Ceiling At 3rd Floor • Relocate Aircon Condenser At 3rd Floor Earthworks • Excavation Work For Pedestal Footings At Waiting Area • Gravel Bedding For Pedestal Footings And Slab At Waiting Area • Backfilling Of Common Soil Using Excavated Soil Must Be Compacted Layer By Layer Concrete Work • Pedestal Footing-column • Slab At Waiting Area Formworks & Falseworks • Formworks For Pedestal Footing-column And Slab • Falseworks/ Scaffoldings For Installation Of Aluminum Cladding At Facade And Painting Works At Exterior Wall Steel Works • Steel Column, Steel Beam At Waiting Area • Rafter • Fascia • Railings (exit • Purlins • Caged Stair And 3rd Masonry Works • Chb Wall For Cr's Architectural Works • Doors And Windows • Tinsmithry ( Polycarbonate Sheet For Waiting Area & Rib-type For Cr At Mayor's Office) • Sibrce And Intal City Sarsge A Hayer Carpentry Works • Fabricate Reception Desk And Pantry Counter • Drywall Partition • Ceiling At 3rd Floor And Basement • Fluted Wall Panel And Oakwood Laminated Finish For Drywall Caulking • Exterior (front, Right And Left Side) And Interior Wall • Ceiling At 3rd Floor And Basement • Steelworks And Vertical Strip Cladding (aluminum) At Facade Tile Works • Ceramic Tiles For Floor And Wall For Additional Cr And Floor Tiles For Basement • Granite Tiles In Travertine Look For Column Cladding • Stone Slab Floor Finish At Entrance And Waiting Area Plumbing Works • Pipes (water, Waste And Soil) • Installation Of Water Closet, Lavatory With Pedestal And Faucet • Install Bathroom Accessories: Toilet Paper Holder, Soap Holder And Cabinet Mirror • Hand Bidet Set • Grab Bar Ladder Floor) Steel Reinforcement • Slab • Pedestal Footings- Columns • Chb Wall For Cr's Electrical Works • Installation Of Electrical Conduits And Wirings, Junction Boxes,lighting Fixtures, Switches, Convenience Outlets, And Aircon Outlet At 3rd Floor And Basement. General Requirements A. Project Billboard (q = 1.00 Lot) Includes 4' X 8' Tarpaulin, 8' X 8' Tarpaulin, 2"x3"x 14" Coco Lumber, 2"*3"x10" Coco Lumber, 2"x2"x8" Coco Lumber, Assorted Sizes C.w. Nails. B. Occupational Safety And Health Program (q = 1.00 Lot) Includes Safety Shoes, Safety Helmet, Safety Gloves, Specialized Ppe. Ii. C. Mobilization / Demobilization (q = 1.00 Lot) Removal Of Structures And Obstruction (q = 212.16 Sq.m) Includes Relocate Aircon Condenser At 3rd Floor, Removal Of Glass Panel Partition, Demolition Of Chb Wall, Demolition Of Existing Tiles At Entrance, Removal Of Ceiling At 3rd Earthworks A. Structure Excavation (q = 5.50 Cu.m) Includes Volume To Be Excavated. B. Backfilling (q = 5.00 Cu.m) Includes Volume To Be Backfilled (includes Compaction). C. Gravel Bedding (q = 0.85 Cu.m) Iv. Includes Volume Of Gravel Bedding. Concrete Works (q = 3.24 Cu.m) V. Includes Portland Cement, Washed Sand, Washed Gravel. Formworks & Falseworks (q = 16.60 Sq.m) Includes Marine Plywood 18mm Thk. X 4' X 8', 2" X 3" X 8' Coco Lumber, 2" X 2" X 8' Vi. Coco Lumber, Scaffolding (rental), Assorted Sizes C.w. Nails. Includes Angle Bar 25x 25 X 4 X 6000 Mm, Angle Bar 38 X 38 X 5 X 6000 Mm, Angle Bar 50 X 50 X 5 X 6000 Mm, Angle Bar 50 X 50 X 6 X 6000 Mm, Angle Bar 75 X 75 X 6 X 6000 Mm, Flat Bars 25mmx3.5mm Thk. X 6000 Mm, Flat Bars 50mmx6mm Thk. X 6000 Mm, Stainless Steel Round Tube Pipe Ss304 (1.3x18.1x4000mm), Stainless Steel Round Tube Pipe Ss304 (1.3x38.1x4000mm), Stainless Steel Round Tube Pipe Ss304 (1.3x50.8x4000mm), C-purlins 50 X 75 X 12 X 1.2x 6000mm, Channel Purlins 50 X 150 X 12 X 1.2x 6000mm, Tubular Steel 200x200x4mm X 6000 Mm, Expanded Metal Black Iron 4' X 8' X 1.5mm Thk (1/2"x1" Hole), Expansion Bolt 1/2" X 12 X 100mm (20pcs Per Pck), Welding Rod (6011), 4" Cutting Disk, 4" Grinding Disk. Vil. Steel Reinforcements (q = 221.77 Kgs.) Inasdes 10mm Odsb X 6m, 12mm Odsb X 6m, No. 16 G.i. Tie Wire. Viii. Masonry Works (q = 17.96 Sq.m) Includes 4" Chb 350psi, Portland Cement, Washed Sand. Architectural Works A. Doors And Windows (q = 18.0 Set) Indudes D1: 800mm X 2150mm Hollow Core Panel Door In Oakwood Laminate Finish With 50 X 150 Mm Door Jamb, Doorknob And Hinges; D2: 800mm X 2150mm Steel Door With Jamb, Doorknob And Hinges; D3: 800mm X 2150mm Panel Door (kiln Dried) With 50 X 150 Mm Door Jamb, Doorknob And Hinges; D4: 2900mm X 2500mm Fixed Glass Partition W/ Aluminum Framed Single Glass Sliding Door In Analok Frame With 1/4" Thk. Bronze Glass; D5: 2740mm X 2500mm Fixed Glass Partition W/ Aluminum Framed Single Glass Sliding Door In Analok Frame With 1/4* Thk. Bronze Glass; D6: 2550mm X 2500mm Fixed Glass Partition W/ Aluminum Framed Single Glass Sliding Door In Analok Frame With 1/4" Thk. Bronze Glass; D7: 3550mm X 2500mm Fixed Glass Partition W/ Aluminum Framed Single Glass Sliding Door In Analok Frame With 1/4" Thk. Bronze Glass; D8: 700mm X 2150 Opening Hollow Core Door Hidden Look As Cladded In Fluted Wall Panels With 50 X 150 Mm Door Jamb, Doorknob And Hinges; W1: 2000mm X 1200mm Sliding Window In Analok Frame W/ 1/4" Thk. Bronze Glass (one Way Mirror); W2: 2880mm X 400mm Awning Glass Window In Analok Frame W/ 1/4" Thk. Bronze Glass (one Way Mirror); W3: 400mm X 400mm Awning Glass Window In Analok Frame W/ 1/4" Thk. Bronze Glass (one Way Mirror); W4: 2800mm X 2100mm Fix Glass Window In Analok Frame W/ 1/4" Thk. Bronze Glass (convert Sliding To Fixed); W5: 2100mm X 2100mm Fix Glass Window In Analok Frame W/ 1/4" Thk. Bronze Glass (convert Sliding To Fixed); Glass Window Tinted Film 0% (50x300cm). B. Tinsmithry (q = 1.00 Lot) Includes 0.50 Mm Thk. X 1000mm X 10ft Coloured Rib Type Roof; 4' X 8' X 3mm Polycarbonate Solid Sheet; Analok Flat Bar 1/8" X 1" X 16ft; Wall Flashing 24" (0.4mm Thk) X 8ft; End Flashing 24" (0.4mm Thk) X 8ft; Gutter 24" (0.4mm Thk) X 8ft; Tek Screw 12 X 65mm (100pcs); Blind Rivets, 1000pcs/box; Vulca Seal (1/4 L); Touch-up Paint; #16 G.i. Tie Wire. C. Vertical Strip Cladding (aluminum) (q = 1.00 Lot) Includes Aluminum Rectangular Tube 50x 100 X 6x 6000 Mm, Aluminum Rectangular Tube 150 X 100 X 4 X 6000 Mm, Expansion Bolt 1/2" X 12 X 100mm (20pcs Per Pck), Welding Rod (6011), 4" Cutting Disk, 4" Grinding Disk. D. City Seal Signage (q = 1.00 Lot) Includes 800mmg Build Up Acrylic Signage, 25mm Thk Acrylic: 800mm Logo Lighted, Led Modules, Acrylic White, Acrylic Black Cut Out. X. Carpentry Works A. Reception Desk And Pantry Counter (q = 1.00 Each) Seudes Marine Plywood 20mm Trk. * 4: * 8, Marine Plywood 25mm Thk. X 4)x 8, White Seo-gloss Laminate Finish 4x8, Black Glossy Laminate Finish 4%8*, Stabs Baose Full 600x2400mm, Laminated Mdf Board 20mm, 4 Xb, Concealed Hinge Soft Close Ful Overlay Ss, Good Lumber 2°*488, Direct Hardware L-bracket 2pcs/ Set, Direct Hardware Cabinet Handle, Finger Pull Cabinet Handle, Drawer Slide (ball Bearing Full Extension), Tile Trim Pvc 10mm (8ft), Wood Glue, Assorted Sizes C.w. Nails. B. Dry Wall Partition (q = 59.80 Sq.m) Includes 4.5mm Thk X 4" X 8* Hardite Ficem Board, Double Furring, 0.40mm Thk. X 2" X 3° X 2" X 5.00m, Good Lumber 1 X1 X8*, 300 X 2740mm Transom Window Fix Glass Window (analok Frame W/ 6mm Bronze Glass), Wood Glue 4 Kg, Blind Rivets (1000pcs/box), Riveter, Assorted Sizes C.w. Nails. C. Ceiling Works (q = 130.91 Sq.m) Includes 4.5mm Thk X 4" X 8" Hardilite Ficem Board, Double Furring, 0.40mm Thk. X 17 X 49 X 17 × 5.00m, Wall Angle 25 X 25 X 0.4 Mm (3m), Blind Rivets, 1000pcs/box, D. Fluted Wall Panel & Oakwood Laminated (q = 162.02 Sq.m) Includes Oakwood Laminate 4x8*, Fluted Panel Wpc Indoor (202mmx30mmx2.85m), Wood Glue 4 Kg, Assorted Sizes C.w. Nails. Xi. Caulking (q = 1.00 Lot) Includes Silicone Sealant 300ml, Caulk Gun. Painting Works (q = 703.09 Sq.m) Indudes Permacoat Flat Latex, Masonry Putty, Permacoat Latex, Acrytex Reducer, Red Oxide Primer, Quick Drying Enamel, Paint Thinner, Epoxy Primer, Acqua Epoxy, Epoxy Reducer, Wood Stain, Paint Roller 7" W/ Paint Tray, Paint Brush 2-½2", Sand Paper (assorted Sizes), Tape Fiberglass Mesh (48mm X 30m), Gypsum Putty (5kg/gal). A. Ceramic Tiles (q = 91.23 Sq.m) Includes 300mm X 600mm Non-skid Ceramic Floor Tiles, 300mm X 600mm Glossy Ceramic Floor Tiles, Ceramic Luxury Outdoor Floor Tile (60x60cm) 4pcs/box, White Cement (2 Kg), Tile Adhessive (heavy Duty), Portland Cement, Washed Sand, Diamond Cutter Wheel. B. Granite Tiles (q = 102.75 Sq.m) Includes 600mm X 600mm Granite Tiles, White Cement (2 Kg), Tile Adhessive (heavy Duty), Portland Cement, Washed Sand, Diamond Cutter Wheel. Xiv. Plumbing Works (q = 1.00 Lot) Includes Stainless Steel Lavatory Faucet (heavy Duty, Two Piece Water Closet, 705x400x775mm, Lavatory With Pedestal (500x655x835mm), Cabinet Mirror 480x700x130cm), Toilet Paper Holder, Soap Holder Basket, Hand Bidet Set Ss 304, Grab Bar Ss 304 L 49 X W 7.5 X H 6 Cm, Floor Strainer 100x150x2.7mm, 4" Dia. Pvc Wye, 4° Dia. Pvc Clean Out, 4* Dia. Pvc Elbow (1/8 Bend), 4* Dia. X 10' Pvc Pipe (5-1000), 3" Dia. Pvc Elbow (1/8 Bend), 3" Dia. X 10' Pvc Pipe (s-600), 2" Dia. Pvc P-trap, 2" Dia. Pvc Clean Out, 2" Dia. Pvc Elbow, 1/8 Bend, 2" Dia. X 10' Pvc Pipe (5-1000), 2 Way Angle Valve, 3 Way Angle Valve, Pvc Cement (400cc), 1/2" Dia. Pvc Elbow, 1/2" Dia.pvc Tee, 1/2" Dia. Pvc Coupling, 1/2" Dia. X 10' Pvc Pipe, Teflon Tape Electrical Works (q = 1.00 Lot) Includes Third Floor Additional Materials: Pvc Conduit Pipe, 3m X 1/2" Inner Diameter; Pvc Conduits Coupling (15mm Inner ®); Pvc Conduit Elbow 90 Deg, (15 Mm Inner 0); Pvc Male Adapter W/ Locknut, (15 Mm Inner ®); Pvc Corrugated Electrical Flexible Hose, 1/2 Inch X 100 Meters/roll; Pvc Moulding, 1/2" X 8ft Per Pc; Pvc Junction Box (octagon Shape) Depth Type W/ Cover And Srews 4" X 4" X 2"; Utility Box, 2°x 4"surface-mounted Type; Electrical Tape; Solvent Cement 50 Pcs X 100cc; Tie Wire/g.i. Wire, Gauge #16 (per Kilo); Pvc Clamp Clip For Pipes And Flexible Hose, 15mm, 100pcs/ Bag; Cable Ties (nylon), Size 150mm / 100 Pcs Per Pack; Electric Wires, Thhn Type, 3.5mm, Copper Wire; Electric Wires, Thhn Type, 5.5 Mm?, Copper Wire; 1-gang, Wide Series 1 Way Switch With Reflector, Wd511, 10a, 250v; 2-gang, Wide Series 1 Way Switch With Reflector, Wd513, 10a, 250v; 3-gang, Wide Series 1 Way Switch With Reflector, Wd515, 10a, 250v; 2-gang Weatherproof Convenience Outlet With Ground And Weatherproof Plate Cover; 1-gang Outlet, 3 Prong, 240v; Square Led Recessed Panel Light 150mmx150mm, 15w; Recessed Led Downlight Directional Cob Type, 230v, 12 Watts; Directional Dual-head Led Ceiling Spot Light Recessed Square Cob Downlight 2x2ow 4000k Nature White, Safety Circuit Breaker With Enclosure Box Case, 30a; Circuit Breaker, Bolt-on Screw Type Terminal, 20 Amp, 2 Poles / Single Phase, 220/240 V, 50/60 Hz; Basement Additional Materials: Switch, 2 Gang Switch W/ Led Set 10a 220v; Switch, 3 Gang Switch W/ Led Set 10a 220v; Led Panel Light Square 30×30 12w, 230v; 2.0mm2 Thhn Stranded Copper Wire; 5.5mm Thhn Stranded Copper Wire; Airconditioning Outlet 230v; Pvc Conduit Pipe, 15mm X3 Meters; Pvc Conduit Coupling (15mm)dia.; Pvc Conduit Elbow 90deg. (15mm)dia.; Junction Box, Pvc Octagonal W/ Cover 4"x4" Depth Type; Utility Box 2"x4" Depth Type; Circuit Breaker 2 Pole 30at Plug In Type; Electrical Tape 3/4" X20yds. Approved Budget For The Contract (abc): P 3,738,263.14 Required Bid Security : 2% Of The Abc If Cash, Manager’s Check; Bank Draft/guarantee, Irrevocable Letter Of Credit Confirmed Or Authenticated By A Universal Or Commercial Bank; And 5% Of The Abc If Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security Delivery Period Is Within One Hundred (100) Calendar Days From Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Three (3) Year From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. Interested Bidders May Obtain Further Information From Iligan City Government And Inspect The Bidding Documents During Office Hours From 8:00 A.m. – 12:00 P.m. And 1:00 P.m. – 5:00 P.m. At The Office Of The Bids And Awards Committee, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule 1.pre-procurement : March 26,2024- 9:30 Am At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Palao, Iligan City 2.issuance Of Bid Documents : April 2 - 30, 2024 – 8:00 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Palao, Iligan City 3.pre-bid Conference : April 11, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 4.submission Of Bids : April 30, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 5.opening Of Bids : April 30, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City A Complete Set Of Bidding Documents Will Be Available To Prospective Bidders Upon Payment Of A Non-refundable Amount Of P 5,000.00 To The Iligan City Government Cashier, At The Bac Office, 2nd Floor, City Hall Main Building, Buhanginan Hills, Pala-o, Iligan City. The Iligan City Government Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Furthermore, The City Government Of Iligan Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expense Or Loss Incurred In The Preparation And Submission Of The Eligibility Statements And Bids. Approved By: (signed)darwin J. Manubag, Phd. Bac Chairman Date Of Advertisement/posting: April 2, 2024 Place Of Posting/advertisement: City Hall/ibjt Bulletin Boards, Iligan Official Website, Phil-geps Itb No. Cb-24-016 (ceo-infra)
Contact
Tender Id
7ad970d2-a8c0-35ee-8e68-122c26f148e4Tender No
10713248Tender Authority
City Government Iligan ViewPurchaser Address
-Website
http://https://www.iligan.gov.ph/