Bus Tenders

Purchaser Name: UTILITY ENTERPRISE CITY TROLLEY BUS | Інформація Про Необхідні Технічні, Якісні Та Кількісні Характеристики Предмета Закупівлі Та Технічна Специфікація До Предмета Закупівлі Викладена У Додатку № 5 Тендерної Документації

Purchaser Name: UTILITY ENTERPRISE CITY TROLLEY BUS | Код 24950000-8 (дк 021:2015) Спеціалізована Хімічна Продукція (рідина Adblue Для Зниження Викидів Оксидів Азоту (сечовина) Або Еквівалент)

Purchaser Name: UTILITY ENTERPRISE CITY TROLLEY BUS | Інформація Про Технічні, Якісні Та Кількісні Характеристики Предмета Закупівлі Викладені В Додатку 5 До Тендерної Документації. Очікувана Вартість Предмета Закупівлі Визначена В Межах Запланованих Витрат, З Урахуванням Вимог Наказу Мінекономіки Від 12.02.2020 Р. За № 275 "про Затвердження Примірної Методики Визначення Очікуваної Вартості Предмета Закупівлі", За Отриманими Пропозиціями.

Purchaser Name: UTILITY ENTERPRISE CITY TROLLEY BUS | Інформація Про Необхідні Технічні, Якісні Та Кількісні Характеристики Предмета Закупівлі Та Технічна Специфікація До Предмета Закупівлі Викладена У Додатку № 3 Тендерної Документації

Details: Description Invitation To Bid For The Supply And Delivery Of Information And Communication Technology (ict) Equipment – 2 Lots Rebidding Project Identification No. Pb-011-2024-r The Philippine Fiber Industry Development Authority Through The General Appropriations Act Fy 2024 Approved Annual Procurement Plan (pcaarrd Project 4) Intends To Apply The Sum Of Two Million Six Hundred Sixty Thousand Pesos (php2,660,000.00) Being The Abc To Payments Under The Contract For The “supply And Delivery Of Information And Communication Technology (ict) Equipment – 2 Lots Rebidding” With Project Identification No. Pb-011-2024-r. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Philippine Fiber Industry Development Authority Through The General Appropriations Act Fy 2024 Approved Annual Procurement Plan (pcaarrd Project 4) Intends To Apply The Sum Of Two Million Six Hundred Sixty Thousand Pesos (php2,660,000.00) Being The Abc To Payments Under The Contract For Each Lot. Bids Received In Excess Of The Abc For Each Lot Shall Be Automatically Rejected At Bid Opening. Lot No. 1 Supply And Delivery Of Branded And Brand New Laptop Computer - Php160,000.00 Lot No. 2 Supply, Delivery, Installation And Setup Of High Processing Workstation Set For Generative A.i. Modelling And Bioinformatics Analysis - Php2,500,000.00 Total Abc: Php2,660,000.00 The Philippine Fiber Industry Development Authority Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By And Shall Be In Accordance With The Delivery Schedule Under Section Vi. Schedule Of Requirements. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. Prospective Bidders May Obtain Further Information From Philfida And Inspect The Bidding Documents At The Address Given Below During Office Hours From 8:00 Am To 5:00 Pm. A Complete Set Of Bidding Documents Can Be Accessed Online Starting December 26, 2024 (thursday) And The Hard Copy Can Be Purchased By Interested Bidders Starting January 3, 2025 (friday) From The Given Address And Websites Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of: Lot No. 1 Supply And Delivery Of Branded And Brand New Laptop Computer - Php160.00 Lot No. 2 Supply, Delivery, Installation And Setup Of High Processing Workstation Set For Generative A.i. Modelling And Bioinformatics Analysis - Php2,500.00 Total Bid Doc Price: Php2,660.00 The Philfida Will Hold A Pre-bid Conference On January 7, 2025 (tuesday) At 9:30 A.m. Through Video Conferencing Via Microsoft Office 365 Teams Which Shall Be Open To Prospective Bidders. Bidder/s Should Submit A Valid Email Address One (1) Day Before The Pre-bid Conference. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At Philfida’s Fiber Processing And Utilization Laboratory, Bai Compound, Visayas Ave., Diliman, Quezon City On Or Before January 21, 2025 (tuesday) At 9:00 A.m. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. Bid Opening Shall Be On January 21, 2025 (tuesday) At 9:30 A.m. At Philfida’s Fiber Processing And Utilization Laboratory: Bai Compound, Visayas Avenue, Quezon City To Be Streamed Live Via Ms Office 365 Teams, The Link Of Which Is Available By Request. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. Bidders May Opt To Attend Virtually. The Bidders Shall Drop Three (3) Copies Of Their Duly Accomplished Eligibility Requirement, Technical And Financial Proposals In Two (2) Separate Sealed Envelopes In The Bid Box Located At Philfida’s Fiber Processing And Utilization Laboratory: Bai Compound, Visayas Avenue, Quezon City. Interested Bidders Are Requested To Contact The Bac Secretariat At Cellular Phone Nos.: 09189402419 And 09274003482 Before Submitting The Bidding Documents. Technical Specifications: Lot 1 Supply And Delivery Of Branded And Brand New Laptop Computer Technical Specifications: 1. 2 Units 2. 14-inch Fhd+ / Ips-level Display (at Least 1920 X 1200 Resolution) 3. Monitor Panel Refresh Rate Of At Least 144hz With At Least 100% Srgb Color Coverage 4. At Least 14 Total Cores And 18 Total Threads (combination Of Performance And Efficient Cores), With At Least 3.3ghz Performance Clock Base Speed 5. At Least 6gb Of Gddr6 Dedicated Graphical Unit, With Raytracing Capability 6. At Least 16 Gb Ddr5 Ram 7. With At Least 512gb M.2 Ssd 8. With Webcam 9. With Backlit Keyboard 10. With At Least Wifi7 Technology 11. With At Least 1x Thunderbolt™ 4 (displayport™/ Power Delivery 3.1); 1x Type-c (usb3.2 Gen2 / Displayport™/ Power Delivery 3.0); 1x Type-a Usb3.2 Gen2; 1x Hdmi™ 2.1 (8k @ 60hz / 4k @ 120hz); 1x Rj45 12. With At Least Windows 11 Pro/home Os Delivery Period: Forty-five (45) Calendar Days Upon Receipt Of Ntp Delivery Site: Immunology And Molecular Biology Laboratory, Visayas Ave., Quezon City Lot 2 Supply, Delivery, Installation And Orientation Of High Processing Workstation Set For Generative A.i. Modelling And Bioinformatics Analysis Technical Specifications: Workstation I: 1. Central Processing Unit: A. At Least 350w Thermal Design Power (tdp) With At Least 64 Core, 128 Threads, And 256mb Cache B. With A Base Clock Speed Of At Least 3.20ghz And A Turbo Speed Of At Least 5.10 Ghz C. Compatible With Wrx90 Socket D. With Compatible Heatsinks And Air Cooling Peripheral For Thermal Management 2. Graphical Processing Unit: A. Dual (2) Gpu Setup Connected Through 2-way Low Profile Bridges B. Each Gpu Should Have At Least 300w Max Power Consumption C. Each Gpu Should Have At Least 48 Gb Gddr6 D. With And Compatible With Pci Express Generation 4 X 16 Graphics Bus E. Vr/raytracing Compatible F. With At Least 4 Display Ports G. Ampere Architecture-based Gpu H. With At Least 10,700 Cuda Cores, And At Least 300 Tensor Cores For A.i Generation And Modelling 3. Memory: A. With A Total Memory Of At Least 256 Gb - Ddr5, Partitioned To 4 Channels B. Memory Should Have At Least 4,800 Mhz Speed 4. Storage: A. With At Least 2 Tb M.2 Nvme Ssd Boot Drive B. With At Least 24 Tb Total Hard-drive Storage, With A Speed Of At Least 7,200 Rpm 5. Chassis And Power Supply: A. Compatible Chassis To Contain Parts B. With At Least 1350w Power Supply 6. Operating System: A. With Windows 11 Pro (english) Operating System Workstation Ii: 1. Central Processing Unit: A. At Least 350w Thermal Design Power (tdp) With At Least 64 Core, 128 Threads, And 256mb Cache B. With A Base Clock Speed Of At Least 3.20ghz And A Turbo Speed Of At Least 5.10 Ghz C. Compatible With Wrx90 Socket D. With Compatible Heatsinks And Air Cooling Peripheral For Thermal Management 2. Graphical Processing Unit: A. With At Least 4 Gb Gddr6 Memory B. At Least 350 Cuda Cores C. With At Least Pci Express Gen 3 Bus D. Turing Gpu Architecture 3. Memory: A. With A Total Memory Of At Least 256 Gb - Ddr5, Partitioned To 4 Channels B. Memory Should Have At Least 4,800 Mhz Speed 4. Storage: A. With At Least 2 Tb M.2 Nvme Ssd Boot Drive B. With At Least 24 Tb Total Hard-drive Storage, With A Speed Of At Least 7,200 Rpm 5. Chassis And Power Supply: A. Compatible Chassis To Contain Parts B. With At Least 1350w Power Supply 6. Operating System: A. With Windows 11 Pro (english) Operating System Peripherals, Software And Warranty: 1. Monitors: A. Two (2) Ips Panel Monitors With At Least 27 Inch Diagonal Size B. Full Hd (1920x1080) Resolution C. Height, Tilt, Swivel And Pivot Adjustable D. Supports Hdmi, Usb 3.2, Rj45 Connection 2. Keyboard And Mouse: A. 2 Pairs Of Qwerty Full Keyboard, And 2 Optical Mouse For The Workstations 3. Four (4) Support Laptops: A. With At Least 16 Cores, 22 Threads And 24 Mb Cache B. With A Turbo Clockspeed Of At Least 4.8 Ghz C. With A Dedicated Graphical Processing Unit With At Least 4gb Gddr6 Memory, Ray-tracing Compatible D. With At Least 32 Gb Ddr5 Memory, With Speed Of At Least 5600 Mt/s E. With At Least 2 Tb M.2 Nvme Ssd Storage F. At Least 15.6" Display Screen With Resolution Of At Least 1920x1080 Fhd G. With Built-in Microphone, Camera, Backlit Keyboard, Wifi 6/6e H. Inclusion Of Wireless Optical Mouse And Backpack I. With Windows 11 Pro (english) Operating System 4. Services And Warranty: A. At Least 3 Years Warranty Support For All Equipment B. At Least 3 Years On-site Services For Workstations C. At Least 1 Year On-site Services For Laptops D. At Least 1 Year Warranty On Laptop Batteries Delivery Period: Forty-five (45) Calendar Days Upon Receipt Of Ntp Delivery Site: Immunology And Molecular Biology Laboratory, Visayas Ave., Quezon City

Details: 8 January 2025 Project Update: The Government Anticipates On Issuing A Solicitation In Mid February 2025. Please Continue To Monitor Sam.gov For Further Updates. *************************************************** the U.s. Army Corps Of Engineers, Japan District (poj) Is Providing A Pre-solicitation Notice Pursuant To Far 36.213-2 For An Upcoming Request For Proposal (rfp). This Is Not A Solicitation. project Information project Title: Fy25 Dodea Pa00199, Replace Kubasaki High School, Camp Foster project Location: Okinawa, Japan product Service Code (psc): Y1ca - Construction Of Schools naics Code: 236220 – Commercial And Institutional Building Construction project Magnitude: Between ¥10,000,000,000 And ¥25,000,000,000 (dfars 236.204) construction Type: Design-bid-build (dbb) Construction project Description: this Project Is For New Construction Of A Two-story, 153,000 Sf, High School With A Capacity Of 680 Students Grades 9-12. The Work Includes The Construction Of Site Improvements, Site Utilities, Supporting And Primary Facilities Including Physical Education Field, Tennis Courts, Multi-court, Concrete Plaza, Amphitheater, Outdoor Learning, Service Access Road, Trash Enclosure, Bus Drop Off And Covered Walkway, Pov Loading/unloading Areas, Staff And Visitor Parking, All Associated Site Improvements, And Installation Of Utilities. the Optional Work Includes Renovations At Mike Petty Field, To Include Demolition Of The Existing Track And Replacement With A New 400-meter Track, To Include New Synthetic Field Turf, New Outdoor Bleachers, Improvements Of Mike Petty Field Press Box, Field House Building, Integrated Public Address (pa) System, New Scoreboards, And A New Pavilion. base Clins: clin 0001, Site Improvements, Site Utilities, Supporting And Primary Facilities clin 0002, 1000 Mm Diameter Cement-soil Columns, Qty: 14,873 clin 0003, 1200 Mm Diameter Cement-soil Columns, Qty: 2,037 option Clin: clin 0004, Renovations At Mike Petty Field (option Item 1) solicitation Information: procurement Method: The Government Will Issue A Request For Proposal (rfp) Solicitation Utilizing The Lowest Price Technically Acceptable Source Selection Procedures. the Government Anticipates Issuing The Solicitation In January 2025. The Solicitation When Issued, Will Identify The Site Visit Date, Rfi And Proposal Submission Due Date. It Is The Responsibility Of Interested Vendors To Monitor Sam.gov For Issuance Of The Solicitation And/or Amendments. the Government Intends To Award A Firm-fixed-price Construction Contract As A Result Of The Rfp. all Interested Companies Shall Be Actively Registered In The System For Award Management (sam) Database In Order To Be Eligible For Award Of Government Contracts. Information On Registration And Annual Confirmation Requirements May Be Found At Http://www.sam.gov. For A Joint Venture, The Joint Venture As An Independent Entity Must Be Registered In Sam As Such. only Local Sources Will Be Considered Under This Solicitation. This Contract Will Be Performed In Its Entirety In The Country Of Japan And Is Intended Only For Local Sources. Only Local Sources Will Be Considered Under This Solicitation. Local Sources Are Sources (e.g. Corporations, Partnerships, Or Joint Ventures [for A Joint Venture, The Joint Venture As An Independent Entity Must Satisfy The Local Source Requirements Or, In The Alternative, Each Member Of The Joint Venture Must Individually Satisfy The Local Source Requirements]) That Are Physically Located In Japan And Authorized (i.e. Licensed And Registered) To Perform In Japan, The Type Of Construction Work Specific In This Solicitation. Specifically, A Prospective Offeror Must Be Duly Authorized To Operate And Conduct Business In Japan And Must Fully Comply With All Applicable Laws, Decrees, Labor Standards, And Regulations Of Japan During The Performance Of The Resulting Contracts. Offerors Are Required To Be Registered With The Government Of Japan To Do Construction Work In Japan And Possess Necessary Construction Licenses And Permits To Perform Work Required Under This Solicitation At The Time An Offer Is Submitted. Construction License Will Be Verified Through The Government Of Japan – Ministry Of Land, Infrastructure, Transport, And Tourism (milt) Https://etsuran2.mlit.go.jp/takken . The U.s. Government Will Not Offer “united States Official Contractor” Status Under Article Xiv Of The Us-japan Status Of Forces Agreement (sofa) To U.s. Contractors Normally Resident In The United States; Nor Will The U.s. Government Certify Employees Of Such Contractors As “members Of The Civilian Component” Under Article I(b) Of The Sofa. firms Which Have Not Done Business With U.s. Army Corps Of Engineers, Japan Engineering District, Are Requested To Visit The Following Website: Https://www.poj.usace.army.mil/business-with-us/ For General Information. electronic Bid/proposal Submission the Us Army Corps Of Engineers Japan District (poj) Has Transitioned To Procurement Integrated Enterprise Environment (piee) Solicitation Module For Bid/proposal Submission (unless Otherwise Specified In The Solicitation), To Replace Dod Safe. It Is Recommended That Contractors Create Their Piee Solicitation Module Account As Soon As Possible And Not Wait Till Bid/proposal Due Date, As Access May Take Time. The Following Information Is Provided For Reference. step 1: Complete Vendor Registration On Https://piee.eb.mil/. Instructions For Registration Can Be Found Through: Https://www.acq.osd.mil/asda/dpc/ce/cap/docs/piee/piee_solicitation_module_vendor_access_instructions.pdf step 2: Upload Offer In The Solicitation Module Through Https://piee.eb.mil/ . Instructions For Uploading An Offer Can Be Found Through: Https://pieetraining.eb.mil/wbt/xhtml/wbt/sol/solicitation/proposals.xhtml u.s. Army Corps Of Engineers, Japan District, Camp Zama, Japan contracting Office Address: usace District, Japan attn: Cect-poj unit 45010 apo, Ap 96343-5010 primary: norman Roldan contract Specialist 098-970-9041 norman.roldan@usace.army.mil alternate: jack T. Letscher contracting Officer 098-970-4402 jack.t.letscher@usace.army.mil

Details: Description Republic Of The Philippines Department Of Public Works And Highways Negros Oriental 1st District Engineering Office Tinaogan, Bindoy, Negros Oriental Name Of Procuring Entity : Request For Quotation (pr No.) : 25gsj002 Revised On : Date : 02/04/2025 Standard Form/title : Request For Quotation Office/end-user :dpwh-nofdeo Company Name : Address : Tel.no./fax No. : Tin: Please Quote Your Lowest Price On The Item(s) Listed Below, Subject To The Terms And Conditions Stated Below And Submit Your Quotation Duly Signed By Your Representative Not Later Than 10:00 A.m. February 13, 2025. In The Return Envelope Attached Herewith, To The Procurement Unit, Dpwh, Nofdeo, Bindoy, Negros Oriental. Terms And Conditions: 1. All Entries Must Be Typewritten Or Legibly Written. 2. Delivery Period Within (_15 Days_) Upon Receipt Of The Approved Funded Purchase Order (p.o.). Administrative Penalties Pursuant To Sec. 69 Of The Revised Irr-ra 9184 Shall Be Imposed For Non-delivery Without Valid Reason. 3. Warranty Shall Be For A Minimum Of Three(3) Months For Supplies & Materials; One(1) Year For Equipment; Three(3) Years For It Equipment From Date Of Acceptance By The End-user. 4. Price Validity Shall Be For A Period Of Sixty(60) Calendar Days. 5. G-eps Registration Certificate/mayor's Permit/dti/tax Clearance Shall Be Attached Upon Submission Of The Quotation. 6. Bidders Shall Submit Original Brochures Of The Product (if Applicable). 7. Please Indicate The Brand For Each Items Being Offered. 8. The Approved Budget Ceiling For The Procurement Is Php263,630.00 9.omnibus Sworn Statement (oss) Jessie C. Paquibo Bac Chairman Item No. Items & Description Qty Unit Unit Price Total Price Spare Parts Backhoe Loader (lx-26) 1 Set 1 Oil Packing Seal (small) 1 Set 2 Oil Packing Seal (big) 3 Set 3 Fabricated Packing Seal Mitsubishi Canter (scn-747) 1 Pc. 4 Cross Joint Coupling 6 Pc. 5 Transmission Linkage 1 Pc. 6 Fan Belt 1 Pc 7 Oil Filter 1 Pc 8 Fuel Filter Vibratory Roller (218-429) 1 Pc. 9 Oil Filter Mitsubishi Strada (0701-1089277/070403) 1 Pc. 10 Turbo Hose Mitsubishi Strada (caw-1612) 1 Set 11 Brake Shoe 1 Set 12 Brake Pad Toyota Hilux (0701-1239649/070101) 1 Set 13 Brake Pad Hino Dumptruck (0401-576698/040101) 1 Pc. 14 Air Filter 2 Pc. 15 Fuel Filter 1 Pc. 16 Oil Filter Hino Bus (074110) 1 Pc. 17 Magnetic Horn 1 Set 18 Brake Lining (front) 1 Set 19 Brake Lining (rear) 1 Pc. 20 Fan Belt 2 Pcs. 21 Oil Seal (outer) 2 Pcs. 22 Oil Seal (inner) Ford Ranger Fai-7983 1 Set 23 Brake Lining Kit 1 Pc. 24 Oil Filter 1 Pc. 25 Blade Wiper (long) 1 Pc. 26 Blade Wiper (short) 1 Set 27 Brake Shoe Toyota Hilux (ska-471) 1 Pc. 28 Fuel Filter 1 Assy 29 Hydrovac 1 Assy 30 Clutch Lining 1 Pc. 31 Brake Master 1 Assy 32 Aircon Compressor Suzuki Multicab (mbp-295) 1 Assy 33 Carburator 1 Pc. 34 Suspension Bushing 1 Pc. 35 Brake Hose Nissan Urvan (070103) 1 Set 36 Brake Pad Mits. Strada (ylr-167) 1 Pc. 37 Oil Filter Pay Loader (l2-1239) 1 Pc. 38 Oil Filter 1 Pc. 39 Fuel Filter Mits. L300 0701-1065126 1 Pc. 40 Oil Filter 1 Pc. 41 Fuel Filter 1 Pc. 42 Idler Arm Assy 1 Pc. 43 Center Post Nissan Pathfinder (shc-771) 1 Pc. 44 Oil Filter 1 Assy 45 Clutch Master Assy. Suzuki Multicab (shc-779) 1 Assy 46 Starter Assy. Isuzu Cargo Truck (sdy-845) 6 Pcs. 47 Oil Ring Seal 6 Pcs. 48 Oil Seal Generator (250 Kva) 1 Pc. 49 Oil Filter 2 Pc. 50 Fuel Filter Mits. Strada Tp-070410 2 Pcs. 51 Front Shock Absorber 2 Pcs. 52 Rear Shock Absorber 2 Sets 53 Caliper Kit 2 Pcs. 54 Caliper Piston 1 Pc. 55 Bolt With Nut 4 Pcs. 56 Upper Suspension Bushing X - X - X - X - X - X - X Purpose: Supply And Delivery Of Various Spare Parts For Use In The Repair And Maintenance Of Various Vehicles Brand And Model : Warranty : Delivery Period : Price Validity : After Having Carefully Read And Accepted Your General Conditions, I/we Quote You On The Item(s) At Prices Note Above. If The Space For Delivery Period, Warranty And Price Validity Are Left Blank, It Means That I Concur With The Terms And Conditions Specified By Dpwh. Printed Name/signature/date Tel. No./cellphone No./e-mail Address

Details: This Advertisement Is Hereby Incorporated Into The Rlp #25reg00 By Way Of Reference As An Rlp Attachment. u.s. Government Seeks To Lease The Following Office Space Through The Automated Advanced Acquisition Program (aaap): city: Cumberland state: Md delineated Area: City Limits Of Cumberland, Md minimum Aboa Square Feet (sf): 1,833 Aboa Sf maximum Aboa Square Feet (sf): 2,146 Aboa Sf space Type: Office lease Term: 10 Years, 5 Years Firm *offerors Are Encouraged To Submit Rates For All Terms Available In The Aaap For Consideration Against Future Gsa Requirements. amortization Term: 5 Years For Both Tenant Improvementsand Building Specific Amortized Capital. internal Revenue Service (irs) Unique Requirements: 1. Agency Tenant Improvement (ti) Allowance: All Locations:$64.65 Per Aboa Sf 2. Building Specific Amortized Capital (bsac)allowance: All Locations: $12.00 Per Aboa Sf 3. Contiguous, Above-ground Space Is Required. 4. If Space Is Not Available On The First Floor For The Taxpayer Assistance Center (tac), Then The Tac Must Be Located Within 200' Of The Elevators. 5. For Effective Space Utilization And Efficiency Of Layout, The Following Cannot Be Considered: A. Narrow Column Spacing; B. Atriums, Light Wells, Or Other Areas Interrupting Contiguous Spaces; C. Extremely Long, Narrow Runs Of Space; D. Irregular Space Configurations; Or E. Other Unusual Building Features. any Other Configuration Must Be Approved By The Gsa Lease Contracting Officer And Irs. 6. Public Parking Spaces Must Be Available For Employees And Taxpayer Assistance Center (tac) Visitors (taxpayers) Within A Walkable ¼ Mile Of The Office Location. 7. Public Transportation: A Commuter Rail, Light Rail Or Subway Station Shall Be Located Within The Immediate Vicinity Of The Building, But Generally Not Exceeding A Walkable ½ Mile, As Determined By The Contracting Officer. Alternatively, Two Or More Public Or Campus Bus Lines Useable By Tenant Occupants Shall Be Located Within The Immediate Vicinity Of The Building, But Generally Not Exceeding A Walkable ½ Mile, As Determined By The Contracting Officer. 8. Irs Normal Hours Of Operation Are 6:00 A.m. To 6:00 P.m., Monday – Friday. important Notes check The Attachments And Links Section Of This Notice For Possible, Additional Project-specific Requirements Or Modifications To The Rlp. offerors Are Advised To Familiarize Themselves With The Telecommunications Prohibitions Outlined Under Section 889 Of The Fy19 National Defense Authorization Act (ndaa), As Implemented By Federal Acquisition Regulation (far). For More Information, Visit: Https://acquisition.gov/far-case-2019-009/889_part_b offerors Are Advised That All Shell Work Associated With Delivering The Tenant Improvements Are At The Lessor’s Cost. Please Refer To Section 3(construction Standards And Shell Components)and Specifically To Paragraph 3.07(building Shell Requirements)of Theaaap Rlp Attachment #2 Titled "lease Contract" (gsaform L100_aaap) For More Detail. Tenant Improvement Components Are Detailed Under Section 5 Of The Aaap Rlp Attachment#2 Titled "lease Contract" (gsaform L100_aaap). it Is Highly Recommended That Offerors Start The Sam Registration Process Directly Following The Offer Submission. Refer To Rlp Clause 3.06. how To Offer the Automated Advanced Acquisition Program (aaap), Located At Https://lop.gsa.gov/aaap, Will Enable Interested Parties To Offer Space For Lease To The Federal Government In Response To The Fy25 Aaap Rlp. In Addition, The Government Will Use Its Aaap To Satisfy The Above Space Requirement. offerors Must Go To The Aaap Website, Select The “register To Offer Space” Link And Follow The Instructions To Register. Instructional Guides And Video Tutorials Are Offered On The Aaap Homepage And In The “help” Tab On The Aaap Website. Once Registered, Interested Parties May Enter Offers During Any “open Period”. For Technical Assistance With Aaap, Email Lop.help@gsa.gov. the Open Period Is The 1st Through The 7th Of Each Month, Ending At 7:30 P.m. (et) Unless Otherwise Stated By The Government And Unless The 7th Falls On A Weekend Or Federal Holiday. If The 7th Falls On A Weekend Or Federal Holiday, The Open Period Will End At 7:30 Pm (et) On The Next Business Day. Refer To Aaap Rlp Paragraph 3.02 For More Details On The Offer Submission Process. The Government Reserves The Right To Allow For Multiple Open Periods Prior To Selecting An Offer For Award To Meet This Specific Space Requirement. Offers Cannot Be Submitted During The Closed Period And Will Not Be Considered For Projects Executed During That Time Period. lease Award Will Be Made To The Lowest Price, Technically Acceptable Offer, Without Negotiations, Based Upon The Requirements In This Advertisement And In The Rlp Requirements Package Found On The Aaap Website. During An Open Period, Offerors Will Be Permitted To Submit New Offers Or Modify Existing Offers. Offerors Can Draft An Offer At Any Time; However, You Can Only Submit An Offer During The Open Period. the Offered Space Must Comply With The Requirements In This Advertisement And The Rlp And Must Meet Federal Government, State, And Local Jurisdiction Requirements, Including Requirements For Fire And Life Safety, Security, Accessibility, Seismic, Energy, And Sustainability Standards In Accordance With The Terms Of The Lease. The Lease And All Documents That Constitute The Lease Package Can Be Found At Https://leasing.gsa.gov/leasing/s/aaap-portalhome. if You Have Previously Submitted An Offer In Fy 2024, The Aaap Application Has A Copy Feature Which Will Allow Existing Offers To Be Copied Over To The Fy 2025 Rlp In Order To Avoid Having To Re-enter All Of The Data Manually. Please Be Sure To Review Fy25 Aaap Rlp Package And Each Page Within The Aaap Application Prior To Submitting Your Offer As Some Of The Questions Have Changed. You Must Re-enter Your Space And Rates On The ‘space And Rates’ Tab In The Aaap. Your Previous Offered Space Will Not Be Copied.

Purchaser Name: Department of Health in Bus Source | Supply of Orthopedic Procedures Units for the Health Care Team in Busko-Zdroj. Zoz/do/om/zp/52/2024

Purchaser Name: Bus Stands Management And Development Authority | Special Repair To Hrtc Workshop At Chamba Distt. Chamba Hp