Battery Tenders

Details: This Sources Sought Notice Is For Planning Purposes Only And Shall Not Be Considered As An Invitation For Bid, Request For Quotation, Request For Proposal, Or As An Obligation On The Part Of The Government To Acquire Any Products Or Services. Your Response To This Sources Sought Notice Will Be Treated As Information Only. No Entitlement To Payment Of Direct Or Indirect Costs Or Charges By The Government Will Arise Because Of Contractor Submission Of Responses To This Announcement Or The Government Use Of Such Information. This Request Does Not Constitute A Solicitation For Proposals Or The Authority To Enter Negotiations To Award A Contract. No Funds Have Been Authorized, Appropriated, Or Received For This Effort. the Information Provided May Be Used By The Department Of Veterans Affairs In Developing Its Acquisition Approach, Statement Of Work/statement Of Objectives And Performance Specifications. Interested Parties Are Responsible For Adequately Marking Proprietary Or Competition Sensitive Information Contained In Their Response. The Government Does Not Intend To Award A Contract Based On This Sources Sought Notice Or To Otherwise Pay For The Information Submitted In Response To This Sources Sought Notice. the Purpose Of This Sources Sought Announcement Is For Market Research To Make Appropriate Acquisition Decisions And To Gain Knowledge Of Potential Qualified Service-disabled Veteran Owned Small Businesses, Veteran Owned Small Businesses, 8(a), Hubzone And Other Small Businesses Interested And Capable Of Providing The Services Described Below. documentation Of Technical Expertise Must Be Presented In Sufficient Detail For The Government To Determine That Your Company Possesses The Necessary Functional Area Expertise And Experience To Compete For This Acquisition. responses To This Notice Shall Include The Following: (a) Company Name (b) Address (c) Point Of Contact (d) Phone, Fax, And Email (e) Uei Number (f) Cage Code (g) Tax Id Number (h) Please Indicate The Size Status And Representations Of Your Business, Such As But Not Limited To: Service-disabled Veteran Owned Small Business (sdvosb), Veteran Owned Small Business (vosb), Hubzone, Woman Owned Small Business (wosb), Large Business, Etc.)? (i) Is Your Company Considered Small Under The Naics Code Identified Under This Ssn/rfi? (j) Are You The Manufacturer, Distributor, Or An Equivalent Solution To The Items Being Referenced Above? (k) If You Are A Large Business, Do You Have Any Designated Distributors? If So, Please Provide Their Company Name, Telephone, Point Of Contact And Size Status (if Available). (l) If You Re A Small Business And You Are An Authorized Distributor/reseller For The Items Identified Above Or An Equivalent Solution, Do You Alter; Assemble; Modify; The Items Requested In Any Way? If You Do, State How And What Is Altered; Assembled; Modified? (m) If You Intend To Subcontract Any Work On This Contract, What Portion Of The Total Cost Will Be Self-performed/will Be Performed By Your Organization? Please Provide Estimated Detailed Percentage Breakdowns Related To Subcontracted Work. (n) Does Your Company Have An Fss Contract With Gsa Or The Nac Or Are You A Contract Holder With Nasa Sewp Or Any Other Federal Contract? If So, Please Provide The Contract Number. (o) If You Are An Fss Gsa/nac Or Nasa Sewp Contract Holder Or Other Federal Contract Holder, Are The Items/solution You Are Providing Information For Available On Your Schedule/contract? (p) Please Provide General Pricing Of Your Products/solution For Market Research Purposes (q) Does Your Company Have An Fss Contract With Gsa Or The Nac Or Are You A Contract Holder With Nasa Sewp Or Any Other Federal Contract? If So, Please Provide The Contract Number. (r) Please Provide General Pricing Of Your Products/solution For Market Research Purposes (s) Must Provide A Capability Statement That Clearly Addresses The Organizations Qualifications And Ability To Perform As A Contractor For The Work Described Below. statement Of Requirements tissue Processors kansas City Va Medical Center description/specification/statement Of Requirements intent: Kansas City Va Medical Center Is In Need Of Renting/leasing Two Tissue Processors To Use In The Preparation Of Tissue Samples Obtained From Veteran Patients. This Preparation Is Necessary To Produce Slides For Review By Pathologists For Diagnostic Purposes. requirement: The Instrumentation Shall Have The Capability To Diffuse Solutions Into Biological Specimens To Ensure That Proper Embedding Occur. new Equipment Shall Be Acquired For The Required Laboratory. Refurbished, Discontinued, Or Previously Owned Units Are Not Acceptable. The Equipment Models Being Offered Shall Be In Current Production As Of The Date This Offer Is Submitted. For Purposes Of This Solicitation, Current Production Shall Mean That The Clinical Laboratory Analyzer Model Is Being Offered As New Equipment. general Requirements: primary Analyzer(s) Base Equipment Offered That Shall Fully Support The Scope Of Operations (minimal Requirements). operational And Technical Features- The Instrumentation Offered Shall Be Approved By The Food And Drug Administration (fda) And Have The Following required Salient Characteristics vacuum Infiltration Tissue Processor. must Be A Floor Standing Model Not To Exceed The Following Dimensions: 32 X 28 X 61 Inch (width X Depth X Height). must Be Moveable To Allow Access To Serviceable Parts For Staff And Service. must Have Touchscreen Interface. must Have A Process Capacity Of Up To At Least 400 Cassettes (blocks) Per Run. must Have The Option Run Different Protocols Simultaneously On One Instrument. must Provide The Option For Specimen Tracking System That Can Record Cassette Id And Quantity, As Well As User Id, In Order To Track Tissues Samples Loaded. must Allow Use Of Commercially Available, Nonproprietary Brands Of Reagents And Reagent Substitutes. must Have Reagent Tracking System Available To Track Reagent Type And Lot. reagent Reservoirs Must Allow Easy Access For Changing Of Reagent Solutions. must Have A Reagent Management System To Allow Rotation Of Solution Groups For Optimum Processing. The Reagent System Should Involve As Little Hands On As Possible For Safety (both Employee Exposure And Specimen Safety) Reasons. For Safety To Include Built In Systems To Minimize Exposure To Chemical Fumes. instrument Must Track Reagent Quality And Concentration For Optimal Use. instrument Must Automatically Rotate Reagents Based On Quality And Concentration. hot Paraffin Is Exchanged Without Manual Handling. must Be Capable Of Holding Up To 10 Processing Programs. must Have A Battery Back-up System (ups) For Electrical Outages. must Have Audible And Visually Displayed Alarms For System Malfunction. must Allow For Delayed Start And End Times Of Processing With Auto-calculation. installation Requirements vendor Must Supply The Following Items In Sufficient Quantities For Initial Operation. all Reagent Bottles With Attachments And Labels. activated Carbon Filters. metal Cassette Basket (baskets) With Handles And Dividers To Complete Up To A 300 Cassette (block) Run. any Necessary Hoses. any Other Parts And Reagents Needed To Allow For Immediate Training And Use After Installation. The Contractor Is Responsible For Any Missing Parts And Components Not Included In The Order To Carry Out The Installation. method Performance/validation Requirements: method Performance/comparison Shall Be At The Expense Of The Contractor, Shall Include Reagents And Be Consistent With Current Clinical Laboratory Standard Institute (clsi) Guidelines, College Of American Pathologists (cap) Standards And Related Federal Regulations. support Features: start-up Reagents. The Contractor Shall Provide All Reagents, Calibrators, Controls, Consumable/disposable Items, Parts, Accessories And Any Other Required To Establish Instruments For Operation For Performance Of Acceptance Testing. This Applies To All Equipment As Well As Additional Or Replacement Equipment Placed Under The Terms And Conditions Of This Contract. The Contractor Shall Perform/assist, To The Satisfaction Of The Government, All Validation Studies. The Contractor Shall Perform All Of The Statistical Analysis Provide A Hardcopy Of Data In An Organized, Clearly Comprehensible Format. documentation: a Current Editable Standard Operating Procedure Shall Be Provided. a Printed, Electronic Copy Or Both, Of The Operator S Manual And Technical Manual Shall Be Provided. the Document(s) Shall Be Formatted In Accordance With Current, Approved Clsi Guidelines. Electronic (cd Format). at A Minimum, Electronic Copies Of Safety Data Sheets (sds) Shall Also Be Provided. updates To All Procedure Manuals In Microsoft Word Format And Sds Sheets In Electronic Format Shall Be Provided When Package Inserts Are Modified. training: the Contractor Shall Provide An Instrument Training Program That Is Coordinated With And Timely To The Equipment Installation, Sufficient To The Size And Scope Of The Facility S Services. This Shall Include Training On The Operation Of The System, Data Manipulation, And Basic Trouble Shooting And Repair. If Applicable, Off-site Travel Shall Include The Cost Of Airfare, Room, And Board For Each Participant, If Applicable. equipment Preventative Maintenance/repair Service. the Contractor Shall Be Able To Provide Emergency Equipment Repair And Preventative Maintenance On Instrumentation, And Any Incremental Support/ancillary Equipment, E.g., Ups, Line Conditioner, Etc. Offered According To The Following Terms: service Requirements preventative Maintenance Will Be Performed As Frequently As Published In Manufacturer S Operator S Manual And Within 2 Weeks Of The Scheduled Due Date. a Technical Assistance Center Shall Be Available By Telephone 24 Hours Per Day, 7 Days Per Week With A Maximum Call Back Response Time Of 1 Hour(s). equipment Repair Service Shall Be Provided During Core Business Hours. Core Business Hours Are 8:00 Am To 5:00 Pm. Certain Circumstances May Dictate The Need For Repair Service To Be Conducted Outside Routine Business Hours. All Such Arrangements Shall Be Coordinated Between The Contractor And Va Laboratory Personnel. equipment Repair Response Time Shall Be On The Same Day Or No More Than 24 Hours. service Must Be Provided By A Local Technician a Malfunction Incident Report Shall Be Furnished To The Laboratory Upon Completion Of Each Repair Call. The Report Shall Include, As A Minimum, The Following: date And Time Notified date And Time Of Arrival serial Number, Type, And Model Number Of Equipment time Spent For Repair And Proof Of Repair That Includes Documentation Of A Sample Run Of Quality Control Verifying Acceptable Performance. each Notification For An Emergency Repair Service Call Shall Be Treated As A Separate And New Service Call. vendor Will Supply Any Parts Necessary To Keep The Equipment Operational. if Upgrades Or Changes In Technology Render A Piece Of Equipment No Longer Necessary, Contractor Shall Remove Said Piece At Contractor S Expense. upgrades - The Contractor Shall Provide Upgrades To Both The Equipment Hardware And Software To Maintain The Integrity Of The System And The State-of The Art Technology, At No Additional Charge To The Government. These Shall Be Provided As They Become Commercially Available And At The Same Time As They Are Being Provided To Commercial Customers. This Requirement Only Applies To System Upgrades That Enhance The Model Of Equipment Being Offered, I.e. New Version Of Software, Correction Of Hardware Defect, Upgrade Offered To Commercial Customers At No Additional Charge, Upgrade To Replace Model Of Equipment No Longer Contractor Supported, Etc. This Does Not Refer To Replacing The Original Piece Of Equipment Provided Under The Contract; However, It Does Refer To Significant Changes In The Hardware Operational Capability. ancillary Support Equipment - The Contractor Shall Provide, Install, And Maintain Through The Life Of The Contract, As Indicated, Any And All Ancillary Support Equipment To Fully Operate The Analyzer As Defined In These Specifications, E.g. Cabinetry To Support/house The Analyzer (if Necessary), Filters, Preventative Maintenance, And Repair, Etc.), Printers And Universal Interface Equipment, Ups And Ups Batteries, Line Conditioners, Etc. In Addition, The Contractor Shall Include All Ancillary Components That Are Customarily Sold Or Provided With The Model Of Equipment Proposed, E.g. Starter Kits, Tables/stands, Etc. commercial Offerings - The Contractor Shall Provide Any Additional Support Material That Is Routinely Provided To Equivalent Commercial Customers And Assists In Regulatory Compliance, E.g., Computer Disc Containing Their Procedure Manual In Clsi Format Or An On-line Procedure Manual In The Instrument Software. characterization Of Waste The Contractor Shall Provide Documentation That It Has Characterized The Hazardous Nature Of All Wastes Produced By All Equipment, Devices, Reagents, And Discharges In Accordance With The Requirements Of The Code Of Federal Regulations Title 40 Protection Of The Environment Part 261 Et Seq. And Applicable State And Local Requirements. Documentation Shall Include A Description Of The Characteristics Of The Hazardous Waste Produced As A Byproduct Of The Instrument Operations, Safety Data Sheets (sds) Meeting The Requirements Of The Occupational Safety And Health Administration (osha) And Environmental Protection Agency (epa), The Analytical Process Used To Determine The Hazardous Nature And Characteristics Of The Waste, And The Analytical Test Results. Testing Of Hazardous Waste Is To Be Done In Accordance With Testing Protocol Specified For Each Individual Waste As Described In The Code Of Federal Regulations Title 40 To Make A Determination If The Waste Is A Hazardous Waste Or Otherwise Regulated. the Determination And Description Shall Address The Following: waste Toxicity (reference 40 Cfr §261.11 And 40 Cfr §261.24) waste Ignitability (reference 40 Cfr §261.21) waste Corrosivity (reference 40 Cfr §261.22) waste Reactivity (reference 40 Cfr §261.23) hazardous Waste From Non-specific Sources (f-listed) (reference 40 Cfr §261.31) discarded Commercial Products (acutely Toxic Or P-listed And Toxic Or U-listed) (reference 40 Cfr §261.33) solid Waste (reference 40 Cfr §261.2) exclusions (reference 40 Cfr §261.4) the Contractor Will Provide Written Instructions And Training Material To Ensure Vha Laboratory Staff Are Trained As Needed To Properly Operate Devices With Special Emphasis To Managing And Disposing Of Hazardous Waste In Accordance With Epa And State Requirements. Additionally, The Training Provided By The Contractor Must Fulfill Resource Conservation And Recovery Act (rcra) Requirements For Training As Applicable To Devices. contractor Shall Provide A Description Of All Wastes The Process Or Equipment May Discharge So That The Facility Can Determine Whether The Discharge Meets Local Publicly Owned Treatment Works (potw), State And Federal Discharge Requirements. At A Minimum The Characteristics Of Ignitability, Corrosivity, Reactivity And Toxicity As Defined In 40 Cfr §261 Must Be Determined And Documented. Any Mercury Containing Reagents Must Be Identified In Any Concentrations. All Test Results Shall Be Provided. All Listed Chemicals (f, U, K And P) Found In 40 Cfr §261 Shall Be Provided In Product Information And Their Concentrations Documented. For Those Materials With A Positive Hazardous Waste Determination, A Mechanism For The Laboratory To Meet Local Discharge Requirements (i.e. Mercury, Thimerosol And Formaldehyde) Must Be Developed And Sds Sheets Must Be Provided In Advance For Review. At A Minimum, Documentation Shall Include, But Not Be Limited To The Concentration/measures Of The Elements And Parameters Listed Below And Must Be Included With Vendor Response: barium (total) cadmium (total) chromium (total) copper (total) cyanide (total) lead (total) mercury (total) nickel (total) silver (total) zinc (total) arsenic (total) selenium (total) tin (total) ph flash Point (to Higher Than 200â°f) bod; Biochemical Oxygen Demand the Documentation The Contractor Provides Will Be Used To Work With The Vamc And The Public And/or Private Organization (e.g., Potw) To Determine Whether Or Not The Waste From Each Device Can Legally Be Disposed Of Via The Sewerage System. implementation/transition Timeframe - The Implementation Of The Services/requirements Described In This Solicitation Shall Be Completed No Later Than 120 Days After The Award Of The Contract. This Timeline Is Based On A Reasonable Attempt Of The Contractor To Complete All Of The Necessary Implementation Requirements Within The Stated Timeframe. Contractor Shall Not Be Penalized For Implementation Timelines That Extend Beyond The 120-day Timeframe If The Extension Is Through No Fault Of The Contractor And Is A Result Of Delays Due To The Government. upon Award Of A Contract, The Transition Period For The Awarded Contract To Have All Equipment And Peripherals Installed And Operational By April 30 Or Mutually Agreed Upon Date. During This Same Period All Initial Training Of Va Personnel In The Operation And Maintenance Of Said Award Shall Also Be Completed. contractor Shall Provide With Its Quotation An Implementation Plan For Installation Of New Equipment. The Plan Should Include Installation And Training Of Personnel, Transition Of All Testing Materials, Reagents, And Supplies, Etc., Performance Of All Correlations And Validations. Failure Of The Contractor To Conform To The Transition Period Shall Be Considered As Sufficient Cause To Terminate Contract For Cause Under The Termination For Cause Clause Of The Contract. at The End Of 120 Days From Award Of The Contract, The Awarded Contractor Shall Have Full And Sole Responsibility For Services Under The Awarded Contract. standard And Quality Of Performance- This Paragraph Establishes A Standard Of Quality Performance That Shall Be Met Before Any Equipment Listed On The Delivery Order [or Contract] Is Accepted By The Government. This Also Includes Replacement, Substitute Machines And Machines That Are Added Or Field Modified After A System Has Demonstrated Successful Performance. The Acceptance Period Shall Begin On The Installation Date. It Shall End When The Equipment Has Met The Standard Of Performance For A Period Of 30 Consecutive Calendar Days By Operating In Conformance With The Contractor S Technical Specification Of Effectiveness Of 90% Or More. if Equipment Does Not Meet The Standard Of Performance During The Initial 30 Consecutive Calendar Days, The Standard Of Performance Tests Shall Continue On A Day-by-day Basis Until The Standard Of Performance Is Met For A Total Of 30 Consecutive Days. if The Equipment Fails To Meet The Standard Of Performance After 90 Calendar Days From The Installation Date, The User May, At His/her Option, Request A Replacement Or Terminate The Order In Accordance With The Provisions Of Far 52.212-4 Entitled Termination For Cause. (the Contractor Shall Receive Revenue For Tests Reported During The 90-day Acceptance Period.) operational Use Time For Performance Testing For A System Is Defined As The Accumulated Time During Which The Machine Is In Actual Use. System Failure Downtime Is That Period Of Time When Any Machine In The System Is Inoperable Due To Equipment Failure. Downtime For Each Incident Shall Start From The Time The Government Makes A Bona Fide Attempt To Contact The Contractor S Designated Representative At The Prearranged Contact Point Until The System Or Machine(s) Is Returned To The Government In Proper Operating Condition. during The Performance Period For A System, A Minimum Of 100 Hours Of Operational Use Time With Productive Or Simulated Work Shall Be Required As A Basis For Computation Of The Effectiveness Level. However, In Computing The Effectiveness Level, The Actual Number Of Operational Use Hours Shall Be Used When More Than The Minimum Of 100 Hours. the Government Will Maintain Daily Records To Satisfy The Requirements Of The Standard And Quality Of Performance Section And Shall Notify The Contractor In Writing Of The Date Of The First Day Of The Successful Period Of Operation. Operations Use Time And Downtime Shall Be Measured In Hours And Whole Minutes. during The Term Of The Contract, Should The Repair Record Of Any Individual Piece Of Laboratory Equipment Reflect A Downtime Of 10% Or Greater Of The Normal Working Days In One Calendar Month, A Determination Shall Be Made By The Cor And/or Contracting Officer To Replace The Malfunctioning Equipment With New Equipment. The Responsibility For Maintaining The Equipment Furnished In Good Condition In Accordance With Manufacturer S Instructions, Shall Be Solely That Of The Contractor. The Same Terms And Conditions Apply To Ancillary/support Equipment Provided Under This Contract, I.e., Water System Ups, Etc. government S Responsibility- The User Will Perform Routine Maintenance And Cleaning As Required In The Manufacturer S Operation And Maintenance Instructions. The User Shall Maintain Appropriate Records To Satisfy The Requirements Of This Paragraph. ownership Of Equipment- Title To The Equipment Shall Remain With The Contractor. All Accessories (unused Consumables, Etc.) Furnished By The Contractor Shall Accompany The Equipment When Returned To The Contractor. The Contractor, Upon Expiration Of Order(s), At Termination And/or Replacement Of Equipment, Shall Remove The Equipment. The Contractor Shall Disconnect The Analyzer (gas, Water, Air, Etc.) And Shall Be Responsible For All Packing And Shipping Required To Remove The Analyzer. as Applicable, The Contractor Will Identify If Removable Media Is Required To Perform Their Duties. The Clinical Engineering Department Will Ensure The Removable Media Is Scanned With Anti-virus Software Running Current Virus Definitions Prior To Connection To Any Medical Device/system. Any Contractor With Patient Sensitive Information That Is Imported Into The Removable Media Device For Any Reason Must Purge All Patient Sensitive Information Prior To Departure From The Facility. contractor/subcontractor Must Not Destroy Information Received From Va, Or Gathered/created By The Contractor Without Prior Written Approval By The Va. Any Data Destruction Done On Behalf Of Va By A Contractor/subcontractor Must Be Done In Accordance With National Archives And Records Administration (nara) Requirements As Outlined In Va Directive 6300, Records And Information Management And Its Handbook 6300.1 Records Management Procedures, Applicable Va Records Control Schedules, And Va Handbook 6500.1, Electronic Media Sanitization. Self-certification By The Contractor That The Data Destruction Requirements Above Have Been Met Must Be Sent To The Va Contracting Officer Within 30 Days Of Termination Or Completion Of The Contract as Applicable, All Electronic Storage Media Used On Non-va Leased Or Non-va Owned It Equipment That Is Used To Store, Process, Or Access Va Information Must Be Handled In Adherence With Va Handbook 6500.1, Electronic Media Sanitization Upon: (i) Completion Or Termination Of The Contract Or (ii) Disposal Or Return Of The It Equipment By The Contractor/subcontractor Or Any Person Acting On Behalf Of The Contractor/subcontractor, Whichever Is Earlier. Media (hard Drives, Optical Disks, Cds, Back-up Tapes, Etc.) Used By The Contractors/subcontractors That Contain Va Information Must Be Retained By The Va For Sanitization Or Destruction Or The Contractor/subcontractor Must Self-certify That The Media Has Been Disposed Of Per 6500.1 Requirements. This Must Be Completed Within 30 Days Of Termination Or Completion Of The Contract Or Disposal Or Return Of The It Equipment, Whichever Is Earlier. as Applicable, Bio-medical Devices And Other Equipment Or Systems Containing Media (hard Drives, Optical Disks, Etc.) With Va Sensitive Information Must Not Be Returned To The Contractor At The End Of Lease, For Trade-in, Or Other Purposes. The Options Are: contractor Must Accept The System Without The Drive. va S Initial Medical Device Procurement Includes A Spare Drive Which Must Be Installed In Place Of The Original Drive At Time Of Turn-in; Or va Must Reimburse The Company For Media At A Reasonable Open Market Replacement Cost At Time Of Purchase. due To The Highly Specialized And Sometimes Proprietary Hardware And Software Associated With Medical Equipment/systems, If It Is Not Possible For The Va To Retain The Hard Drive, Then; the Equipment Contractor Must Have An Existing Baa If The Device Being Traded In Has Protected Health Information Stored On It And Hard Drive(s) From The System Are Being Returned Physically Intact; And any Fixed Hard Drive On The Device Must Be Non-destructively Sanitized To The Greatest Extent Possible Without Negatively Impacting System Operation. Selective Clearing Down To Patient Data Folder Level Is Recommended Using Va Approved And Validated Overwriting Technologies/methods/tools. Applicable Media Sanitization Specifications Need To Be Pre-approved And Described In The Purchase Order Or Contract. a Statement Needs To Be Signed By The Director (system Owner) That States That The Drive Could Not Be Removed And That (a) And (b) Controls Above Are In Place And Completed. The Information Security Officer (iso) Needs To Maintain The Documentation. important Information: The Government Is Not Obligated To, Nor Will It Pay For Or Reimburse Any Costs Associated With Responding To This Source Sought Synopsis Request. This Notice Shall Not Be Construed As A Commitment By The Government To Issue A Solicitation Or Ultimately Award A Contract, Nor Does It Restrict The Government To An Acquisition Approach. The Government Will In No Way Be Bound To This Information If Any Solicitation Is Issued. Currently A Total Set-aside For Service-disabled Veteran Owned Small Business Firms Is Anticipated Based On The Veterans Administration Requirement With Public Law 109-461, Section 8127 Veterans Benefit Act. however, If Response By Service-disabled Veteran Owned Small Business Firms Proves Inadequate, An Alternate Set-aside Or Full And Open. any Response To This Source Selection From Interested Parties Must Be Received Nlt 02/07/2025, 1500 Pm Est. attention: Arlie Lindsey, Contracting Specialist. email: Arlie.lindsey@va.gov please Reference 36c25525q0141 Tissue Processors Lease/rent Kcvamc In The Subject Line. please Provide Your Unique Entity Id So That Your Organization Can Be Identified In Sam.gov And Vetbiz If Organization Is Claiming Sdvosb Preference. only Organizations With An Active Sam.gov Account Can Be Considered. utilize This Link To Either Start A New Registration Or To Renew The Organization S Registration. https://sam.gov/content/home

Details: Request For Information (rfi) subject: Inspection, Preventive Maintenance And Emergency Repairs/replacement Services For The Emergency Power Supply Systems (epss) For The Chemical Biological Center (cbc) Located At Aberdeen Proving Ground - Edgewood Area, Md, 21010 this Is A Request For Information (rfi) Only – This Rfi Is Issued Solely For Information And Planning Purposes. This Is Not A Request For Proposals (rfp) Or A Request For Quotations (rfq); It Is Strictly A Rfi. Neither Unsolicited Proposals Nor Any Other Kinds Of Offers Will Be Considered In Response To This Rfi. No Contract Will Be Awarded Pursuant To This Announcement. This Notice Does Not Constitute A Commitment By The United States Government To Contract For Any Supply Or Service Whatsoever. All Information Submitted In Response To This Announcement Is Voluntary; The United States Government Will Not Pay For Information Requested Nor Will It Compensate Any Respondent For Any Cost Incurred In Developing Information Provided To The United States Government. Not Responding To This Rfi Does Not Preclude Participation In Any Future Rfp Or Rfq, If Any Is Issued. 1.0 Disclaimer: This Rfi Is Issued Solely For Market Research Information And Planning Purposes And Does Not Constitute A Solicitation. Neither Unsolicited Proposals Nor Any Other Kind Of Offers Will Be Considered In Response To This Rfi. Responses To This Notice Are Not Offers And Will Not Be Accepted By The Government To Form A Binding Contract. Responders Are Solely Responsible For All Expenses Associated With Responding To This Rfi. All Information Received In Response To This Rfi That Is Marked Proprietary Will Be Handled Accordingly. Responses To The Rfi Will Not Be Returned. At This Time, Questions Concerning The Composition And Requirements For A Future Rfp Will Not Be Entertained. 2.0 Subject: The Cbc Is Conducting Market Research To Assess The Commercial Availability Of Inspection, Preventive Maintenance And Emergency Repairs/replacement Services For Their Epss’. the Anticipated North American Industry Classification System Code (naics Code) Is 811210 (electronic And Precision Equipment Repair And Maintenance). in Response To This Sources Sought Notice, Please Provide The Following: do You Have The Capabilities To Perform The Work Required For This Effort? is Your Company Classified As A Large Or A Small Business? are There Any Concerns You Foresee With This Requirement? responses To This Notice Shall Be Submitted Via Email To Michele A. Connolly At Michele.a.connolly.civ@army.mil. Telephone Responses Will Not Be Accepted. Responses Must Be Received No Later Than Friday, January 31, 2025, At 4:30pm Est. If A Solicitation Is Issued, It Shall Be Announced At A Later Date, And All Interested Parties Must Respond To That Solicitation Announcement Separately From The Responses To This Sources Sought. Responses To This Sources Sought Notice Are Not A Request To Be Added To A Prospective Bidders List Or To Receive A Copy Of The Solicitation. 3.0 Description: This Is A Non-personal Services Contract To Provide Routine Inspections, Maintenance, Operational Testing, Repairs, Replacement And Emergency Service Response For The Emergency Power Supply Systems (epss) At Combat Capabilities Development Command (devcom), Chemical Biological Center (cbc) Aberdeen Proving Ground, Md. The Contractor Will Provide All Services In Accordance With (iaw) National Fire Protection Association (nfpa) 110, Most Recent Version, For Level 1, 2 And 3 Equipment, Tm 5-685, National Electrical Code (nec)/nfpa 70 And Manufacturer’s Published Procedures. A Current List Of All Equipment To Be Maintained As Part Of The Epss Is Included In Attachment A – Master Generator Equipment Listing. There Are Currently (35) Systems In Place Requiring Service. 3.1general Requirements: The Contractor Shall Perform Provide Routine Inspections, Maintenance, Operational Testing, Repairs, Replacement And Emergency Service Response This Includes All Labor, Materials, Consumables, And Equipment Necessary To Accomplish The Contract Requirements Required To Successfully Complete The Inspection, Maintenance And Repairs, For The Continued Operation Of Cbc’s Epss’. ​​​​​​​3.2technical Qualifications. The Contractor Shall Be Qualified In The Maintenance And Repair Of The Types Of Emergency Power Supply Systems (epss) Used In Research Laboratories, Hospitals Or Large-scale Medical Facilities, Specifically All Makes/models Listed In Attachment A – Master Generator Equipment Listing. The Contractor Shall Have The Ability To Provide Twenty-four (24) Hour Service And Have A Response Time For Emergency Calls Of No Less Than 2 Hours . The Contractor Shall Provide Proposed Communication Procedures With Phone Numbers And Emails Of Both Primary And Secondary Contacts And Answering Machines With Instructional Messages/ Voicemail Will Not Be Acceptable. The Contractor Shall Submit Satisfactory Manufacturer Or General Certification Of Personnel Training For Manufacturers Listed In Attachment A – Master Generator Equipment Listing. All Technicians Performing Services On This Contract Must, At A Minimum, Maintain The Apprenticeship Level Certification Provided By The Electrical Generating Systems Association (egsa). All Journeyman Level Technicians Shall Maintain Journeyman Certification Obtained Through The Egsa, Have At Least Five (5) Years Of Experience On Any Of The Following Generators: Katolight, Kohler, Caterpillar, Cummins And/or Similar Commercial Generators And Shall Be Proficient In Programming And Troubleshooting Of Electronic Programmable Logic Controllers. At A Minimum, One Qualified Journeyman Must Be Onsite At All Times During Performance Of Pws Requirements. 3.3 Quality Assurance: The Government Will Evaluate The Contractor’s Performance Under This Contract In Accordance With The Quality Assurance Surveillance Plan (qasp). This Plan Primarily Focuses On What The Government Must Do To Ensure That The Contractor Has Performed In Accordance With Designated Performance Standards. The Qasp Defines How The Performance Standards Will Be Applied, The Frequency Of Surveillance, And The Minimum Acceptable Defect Rate(s). 3.3.1 Quality Control Plan (qcp) - Contractor Shall Develop And Maintain A Qcp To Ensure Services Are Performed In Accordance With (iaw) This Pws. The Contractor Shall Develop And Implement Procedures To Identify, Prevent, And Ensure Non-recurrence Of Defective Services. The Contractor's Qcp Is The Means By Which It Assures That The Work Provided Complies With The Requirements Of The Contract. The Qcp Shall Be Submitted To The Contracting Officer (ko) And Contracting Officer’s Representative (cor) Within 30 Days Of Contract Award. 3.4 Hours Of Operation. The Contractor Must Perform All Scheduled Work Under This Contract (including Meetings) During Normal Business Hours (0700 – 1630), Unless Requested By The Cor. . These Hours Can Be Augmented Or Adjusted As Required To Accommodate Scheduled System Outages During Low Demand Hours For Maintenance, Or To Make Repairs In The Event Of An Unscheduled Service Interruption. The Government Reserves The Right To Change Hours Of Operation Or Restrict Contractor Access. 3.5 Contractors Accessing A Dod Facility Or Installation. The Contractor Shall Ensure That All Personnel (including Subcontractors) Assigned To Perform Work Associated With The Tasks Described In This Pws Have Been Screened Through Standard Employment Background Checks. Contractor And All Associated Sub-contractors Employees Shall Comply With Adjudication Standards And Have A -tier I Investigation With Favorable Results. The Contractor Shall Provide Proof Of These Screenings Upon Request By The Cor. Some Epss’ May Be Located In A Secure Area That Requires Escort. 4.0 Performance Requirements. 4.1 Inspection, Preventative Maintenance And Operational Testing. All Routine Maintenance And Operational Testing Shall Be Performed In Accordance With The Standards Of Nfpa 110 As Well As Manufacturer’s Recommendations, Instruction Manuals And The Authority Having Jurisdiction. A Maintenance Schedule For All Epss Equipment Included In This Contract Is In Attachment B – Epss Schedule. This Document Details All Requirements To Be Completed During Inspection, Preventative Maintenance And Operational Testing For All Epss’. Maintenance Schedules Shall Be Adhered To And Shall Follow The Published Intervals For Level 1 And 2 Equipment, To Include Monthly, Quarterly, Semi-annual And/or Annual Work. 4.1.1 Exercising Under Load. All Epss’s In Service Shall Be Exercised For A Minimum Of (30) Minutes, Using One Of The Following Methods: 4.1.1.1 Loading That Maintains The Minimum Exhaust Gas Temperatures As Recommended By The Manufacturer. 4.1.1.2 Under Operating Temperature Conditions And At Not Less Than 30 Percent Of The Eps Standby Nameplate Kw Rating Equivalent Loads (load Banks) Used For Testing Shall Be Automatically Replaced With The Emergency Loads In Case Of Failure Of The Primary Source. 4.1.2 Transfer Switches (ats). Transfer Switches Shall Be Operated Monthly Iaw Nfpa 110, 8.4.6.1. The Contractor Shall Also Perform Semi-annual Maintenance And Testing Of The Ats To Include The Following Operations: 4.1.2.1 Checking Of Connections 4.1.2.2 Inspection Of Testing For Evidence Of Overheating And Excessive Contact Erosion 4.1.2.3 Removal Of Dust And Dirt 4.1.2.4 Replacement Of Contacts, When Required. 4.2 Repairs, Emergency Service And Replacement Parts. The Contractor Shall Be Responsible For Any Repairs Needed On Any Piece Of Equipment Listed In Attachment A Throughout The Period Of Performance Of This Contract. All Repair Work Must Be Done Iaw Nfpa 110 For Level 1, 2 And 3 Equipment, Tm 5-685, Nec/nfpa 70, And Manufacturer Recommendations. Any Repair/replacement Required Outside Of The Normal Maintenance And Repair Identified In Attachment B Epss Maintenance Schedule, Must Be Submitted To And Approved By The Contracting Officer’s Representative (cor), Via A Quote, In Advance Of Any Work Being Executed. 4.3 Unscheduled Service And Repair Calls. These Calls Are Generally Routine Calls That Consist Of Correcting Failures, Which Do Not Immediately Impact Daily Operations. The Contractor Shall Be On Site To Troubleshoot And Diagnose The Problem Within (12) Hours Of Notification. 4.4 Emergency Service And Repair Calls. Emergency Calls Consist Of A Failure During An Exercise Or During An Actual Utility Power Outage. Failures Will Impact Daily Operations And/or Critical Mission Requirements, And The Contractor Shall Be On Site To Troubleshoot And Diagnose The Problem Within (2) Hours Of Emergency Notification. 4.5 Emergency Re-fueling And Delivery. In An Emergency Situation, Such As During A Weather Event Or If Apg Department Of Public Works (dpw) Supply Is Depleted Or Cannot Provide Fuel In Time To Keep Equipment Running, The Contractor Shall Provide All Necessary Services, Equipment, Personnel, Delivery Services And Materials Required To Provide Diesel Fuel Delivery. These Services Can Occur 24x7 During Normal Business Periods And During Catastrophic Or National Disasters. 4.6 Backup Generators. The Contractor Must Have At Least (2) Portable Generators Available At All Times, To Use As Temporary Replacements Should An Epss Included On This Contract Be Placed Out Of Service. 4.7 Emergency Replacement Of Existing Generators. The Contractor Should Supply And Install All Components, Materials, And Labor Required To Replace Any Of The Existing Generators Covered Throughout This Pws, As Needed Should It Be Deemed Irreparable. This Includes Automatic Transfer Switches, Backup Emergency Generators And Fuel Tanks. This Includes All Electrical Mechanical, Civil And Permitting Work Needed To Properly Install The Generator According To State And Local Codes. Equipment Shall Be Installed According To Manufacturer's Instructions. Installation Of The Unit Shall Be Performed By Licensed Electricians And Other Certified Installers. The Contractor Shall Make All Connections To The Building's Panel Boxes, Required Interfaces With The Electrical Company And Provide Any/all Enhancements Or Updates To The Electrical Lines. The Proposed Installation Must Comply With Local, State, And Federal Regulations For Permanent Mount Emergency Generators And Adhere To All Applicable National Electrical Codes ("nec"), And National Fire Protection Association ("nfpa") Codes. The Contractor Must Also Coordinate With Local Power Company, Currently City, Light & Power For All Outages Needed To Complete The Work. 4.7.1 The Contractor Shall Provide All Labor And Materials Necessary To: (a) Remove And Reconnect Feeder For Temporary Generator And Prepare For New Generator. This Shall Include Supplying And Hooking Up Emergency Power Generator For Temporary Connection Until Completion Of Installation And Satisfactory Load Bank Run Of New Generator. (b) Remove Old Generator And Appurtenances To Include Removal Of The Existing Concrete Slab And Appurtenances If Existing Site Is Determined To Not Be Reuseable. (c) In The Instance Where The Current Pad Site Is Determined To Be Unusable For Direct Replacement, The Contractor Shall Install A New Concrete Pad To Accommodate The New Generator Per Set Manufacturer’s Specifications. The Contractor Shall Follow All Local And Installation Permitting Requirements To Obtain All Required Permits. (d) The Contractor Will Install The New Generator And Set-up Mounting(s) Per Manufacturer’s Specifications. The Contractor Shall Connect Generator Start Circuit, Battery Charger And Sump Heater, As Applicable, To Nearest Available Power Supply; Connect Fuel Supply To New Generator; Verify Installation And Perform Start-up Checks, Transfer And Load Bank Testing To Ensure Proper Operation Of All Electrical And Mechanical Components. Contractor Is Responsible For Clearing All Work Debris And Material From Removal/installation Sites And Disposing It Properly. (e) If Applicable, The Contractor Will Install And Disconnect Any Government Furnished Temporary Emergency Generator. The Contractor Shall Include The Cost Of Connection/disconnection Of A Temporary Furnished Generator. Generator Shall Be Set Up And Tied Into Existing Emergency Feeds And Automatic Start Circuit. 4.7.2 Excavation Clearances: Contractor Shall Obtain An Excavation Permit (ep) From The Construction Branch Of Dpw Before Starting Any Excavation Work. The Contractor Shall Initiate The Permit Process By Filling Out The “excavator Section” Of The Ep, And Submit Through Inframap Located In The Basement Of Building 4304. Processing Will Normally Require Ten (10) Working Days. The Contractor Shall Also Obtain Digging Clearance Through “miss Utility” To Check For The Existence Of Private Commercial Utilities Prior To Any Excavation. 4.8 Installation Of Green Strobe Generator Status Lights. The Contractor Shall Supply And Install A Green Strobe Light That Signals The Generator’s Operating Status Near Or On Each Individual Generator That Indicates The Generator Is Operational. These Installations Shall Be Completed Using A Phased Approach Approved By The Government Cor During The Base Year Of This Contract. The Contractor Shall Submit Their Phased Installation Plan To The Cor For Approval Within 30 Days Of Contract Award. 4.9 Records. The Contractor Shall Provide And Maintain All Records Both Electronically And On-site, With Log Books At Each System That Are Updated Once Any Actions Are Taken, E.g. Inspections, Operational Tests, Exercising, Repairs, And Modifications. If Required, Repair Or Replacement Quotes Shall Be Submitted Within Five (5) Business Days To The Cor Upon Discovery Of Need. 4.10 Quotes: Any Repair/replacement Beyond What Is Covered In The Standard Maintenance And Repair Sections Of This Contract Require A Quote Be Submitted And Pre-approved By The Cor, Prior To Commencement Of Any Work Being Performed. if A Repair/replacement Part Is Required And Has The Ability To Impact Mission, The Cor Shall Be Provided A Quote For The Total Cost Broken Down By Labor Time, Parts And Materials Within (8) Hours Of The Discovered Issue. In The Event That A Repair/replacement Part Is Required, And It Will Not Impact Mission, The Cor Must Be Provided A Total Quote For Time And Materials Within (48) Hours Of The Discovered Issue. 4.11 Record Of Maintenance, Repair And/or Operational Testing. Records Are Required To Be maintained Via A Digital Logbook Maintained By The Contractor. The Digital Log And Copies Of Inspection Maintenance Sheet(s) Shall Be Submitted By The 10th Of Each Month To The Cor. 4.12 Operational Readiness Report. Contractor Shall Provide A Monthly Operational Readiness Report Stating The Current Condition Of Each Emergency Power Supply System (epss) Included In The Contract. Report Shall Be Submitted By The 10th Of Each Month And Shall Be Furnished To The Cor And Building Facility Managers. A Full List Of Building Facility Managers Will Be Provided Upon Task Order Award.

Details: Description Republic Of The Philippines Province Of Guimaras Municipality Of Sibunag Bids And Awards Committee Invitation To Bid For Bid No. 2025-009– Purchase Of Office Supplies For Mayor’s Office & Municipal Budget Office The Municipality Of Sibunag Through The 2025 Mo-mooe (mo Office Supplies) Intends To Apply The Sum Of Four Hundred Five Thousand One Hundred Fifteen Pesos (405,115.00) & Mbo Office Supplies Intends To Apply The Sum Of Fifty-six Thousand Twenty-seven Pesos (56,027.00) With Total Abc (461,142.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Bid No. 2025-009– Purchase Of Office Supplies For Mayor’s Office Municipal Budget Office. Bids Received In Excess Of The Abc Shall Be Automatical-ly Rejected At Bid Opening. 1. The Municipality Of Sibunag Now Invites Bids For Bid No. 2025-009– Purchase Of Office Supplies For Mayor’s Office Municipal Budget Office. Delivery Of The Goods Is Required 30 Calendar Days. Bidders Should Have Completed, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly In Section Ii. Instructions To Bidders. 2. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Re-public Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. 3. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From Municipality Of Sibunag And Inspect The Bid-ding Documents At The Address Given Below From 8:00 Am To 4:30 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 20-30, 2025 From The Address Below And Upon Payment Of A Nonrefundable Fee For The Bidding Documents In The Amount Of Five Hundred Pesos (p500.00). 6. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before 1:00 Pm Of Janu-ary 30, 2025. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 7. Bid Opening Shall Be On 1:15 Pm Of January 30, 2025 At Assessor’s Office, Sibunag Municipal Hall, Dasal, Sibunag, Guimaras. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 8. The Municipality Of Sibunag Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Engr. Zaldy C. Domalina Bac Chairperson Municipality Of Sibunag Dasal, Sibunag, Guimaras Cp # 09207155768 Engr. Zaldy C. Domalina Bac Chairperson Republic Of The Philippines Province Of Guimaras Municipality Of Sibunag Bids And Awards Committee -ooo- Subject: Bid Proposal Project: Purchase Of Office Supplies For Mayor’s Office & Municipal Budget Office Project Location: Municipal Site, Dasal, Sibunag, Guimaras Date/time Of Bidding: January 30, 2025, 1:00 Pm Item # Description Unit Qty Unit Cost Total Cost Project I- Mo, Abc=405,115.00 1 Double Sided Tape, 1 Inch, 10m Pcs 20 2 Battery Aa, Rechargeable 2/pack Packs 20 3 Packing Tape , 2 Inches, 300m Pcs 10 4 Clear Tape 1" 300m Pcs 15 5 Bondpaper, Short, Subs.20, Gsm 70 Reams 200 6 Bondpaper, Long, Subs.20, Gsm 70 Reams 100 7 Bondpaper, A4, Subs.20, Gsm 70 Reams 20 8 Bathroom Tissue, 2 Ply Rolls 300 9 Black Out Curtain, Fabric (plain) Roll 1 10 Correction Tape, Big, 5mm X 8m Pcs 25 11 Coffee Stick, 1.9g, 36's/pack Packs 30 12 Sugar, Brown Kilos 5 13 Calculator, 12 Digits Pcs 5 14 Computer Ink, Compatible For Epson L14150, Cyan 001 Bot 10 15 Computer Ink, Compatible For Epson L14150, Black 001 Bot 5 16 Computer Ink, Compatible For Epson L14150, Magenta 001 Bot 5 17 Computer Ink, Compatible For Epson L14150, Yellow 001 Bot 5 18 Computer Ink, Compatible For Epson L5290, (003)cyan Bot 5 19 Computer Ink, Compatible For Epson L5290, (003) Black Bot 5 20 Computer Ink, Compatible For Epson L5290, (003) Magenta Bot 5 21 Computer Ink, Compatible For Epson L5290 (003) Yellow Bot 5 22 Computer Ink, Compatible For Brother, Black D60bk Bot 5 23 Construction Paper, Assorted Color Packs 10 24 Door Mat 18"x30" Pcs 20 25 Dipper Pcs 10 26 Detergent Powder, Sachet, 65g Dozens 30 27 Dustpan, Plastic, Good Quality Pcs 10 28 Dishwashing Liquid, Liters 10 29 Estension Cord, 10 Meters, W/socket, Good Quality, 3 Gangs Pcs 10 30 Extension Cord, 10 Meters, W/socket, Good Quality, 3 Gangs Pcs 10 31 Envelope, Letter/mailing, Long Pcs 1000 32 Envelope, Letter/mailing, Short Pcs 1000 33 Expanded Plastic Envelop Without Handle Long, Good Quality Pcs 100 34 Expanded Envelop, Long, Blue Pcs 100 35 Fabric Conditioner, 24 Ml Dozen 50 36 Flash Drive, 64 Gb Pcs 5 37 Folder White, Long, Good Quality Pcs 200 38 Folder White, Short, Good Quality Pcs 200 39 Folder Expanded, Long, Good Quality, Yellow Green & Red Pcs 200 40 Gun Tacker T-50 Heavy Duty 3 Way Staple & Nail Gun Pcs 3 41 Gun Tacker Wire T-50 3/8" 10mm Box 20 42 Gun Tacker Wire T-30 1/4" 6mm Box 20 43 Glue Glun (big), Good Quality Pcs 10 44 Glue Stick Big, Transparent Pcs 500 45 Glue Stick Small, Transparent Pcs 200 46 Ink Of Copier (duplo) Pc 10 47 Internal Hard Drive 2 Tb Pcs 3 48 Marker, Fluorescent, Assorted Color Pcs 10 49 Photo Paper, Matte, Long, 20's/pack Packs 25 50 Specialty Paper, Short, Ivory 20's Packs 100 51 Specialty Paper, Long, Ivory 20's Packs 100 52 Sponge Pcs 20 53 Sticker Paper, A4, Matte 20's Packs 20 54 Signpen, 0.5mm, Blue, 12's/box Boxes 20 55 Signpen, 0.5mm, Black, 12's/box Boxes 10 56 Signpen, 0.7mm, Blue, 12's/box Boxes 20 57 Signpen, 0.7mm, Black, 12's/box Boxes 10 58 Sticky Note Pad, Assorted Color 3x3 Pads 15 59 Sticky Note Strips, Assorted Color 3 X 1/2 Packs 15 60 Scissors, Good Quality 6" Pcs 10 61 Stapler With Remover, Big, Good Quality Pc 10 62 Staple Wires, #35 Boxes 5 63 Sd Card 512 Pc 2 64 Toilet Bowl Cleaner, 500ml Bottles 20 65 Toilet Brush Pcs 10 66 Toilet Plunger Pcs 10 67 Trash Bags, Plastic, 10's, Xxl Packs 20 68 Softbroom, Good Quality Pcs 10 69 Trash Bin, Medium Size Good Quality Pcs 10 70 Mop, Spin, Good Quality Pcs 10 71 Glue, 1,010g Liters 1 Sub-total 72 Glue 130g Pcs 5 73 Pail (5 Liters) Pcs 10 74 Spoon, Stainless, Good Quality Dozen 2 Total 75 Fork Stainless, Good Quality Dozen 2 76 Plate 10" Ceramic, Good Quality Dozen 2 77 Coffee Mugs, Ceramic, Good Quality Dozen 2 78 White Board Marker, Black 25 Ml Pcs 10 79 Stamp Pad Ink, Blue 30ml Pcs 10 80 Facsimile Stamp Pcs 5 81 Certified True Copy Stamp Pcs 5 82 Received Stamp Pcs 5 83 Customized Stamp (mayor's Name & Designation) Pcs 2 84 Ruler Steel 2ft Pcs 5 85 Molar File With Blue Color Pcs 30 86 White Borad 2x4 Ft Pcs 2 87 Whiteboard 4x8 Ft Pcs 2 88 Scotch Tape Dispenser Pcs 2 89 Hand Towel, Microfiber 16x24 Inches Dozen 2 90 Black Out Ring Curtain 7ft (plain) Pcs 10 91 Hi-techpoint Pen 0.7 (black And Blue) Pcs 12 92 Hi-techpoint Pen 0.5 (black And Blue) Pcs 12 Project Ii-mbo, Abc=56,027.00 1 Epson Ink 664, Cyan, 70 Ml Bottles 2 2 Epson Ink, Magenta 664, 70 Ml Bottles 2 3 Epson Ink, Yellow 664, 70 Ml Bottles 2 4 Epson Ink, Black 664, 70 Ml Bottles 5 5 Canon Ink G3010, Gi-790 Cyan Bottle 2 6 Canon Ink G3210, Gi-790 Yellow Bottle 2 7 Canon Ink G3010, Gi-790 Magenta Bottle 2 8 Canon Ink G3010, Gi-790 Black Bottle 5 9 Plastic Folder Thick (long) Green, Red Dozens 12 10 Plastic Folder Thick (short) White Dozens 15 11 File Folder, 14pts, White, Legal, 100s/ Bundle Bundle 3 12 File Folder, 14pts, White, Letter, 100s/ Bundle Bundle 2 13 Brown Envelope (long) Dozens 3 14 Brown Envelope (short) Dozens 3 15 Bond Paper (short) Subs.20, Letter, 8 ½” X 11 Reams 35 16 Bond Paper (long) Subs.20, Legal, 8 ½” X 13 Reams 10 17 Bond Paper A4 Size , Subs 20, 500 Sheets Reams 5 18 Sign Pen .07 Pcs 24 19 Pentel Pen Black (broad) Pcs 3 20 Pentel Pen Blue (broad) Pcs 3 21 Comb Ring ¾ “x 44” Long Plastic ½ Wide Pcs 20 22 Alcohol 1000 Ml 99.9% Germ Kill Bottle 5 23 Metal Triangular Scale Ruler (30cm) Pcs 2 24 Correction Tape (big) Pcs 10 25 Calculator 12 Digits (two Way Power) Big Pcs 2 26 Paper Clips (vinyl Coated) Boxes 6 27 Paper Clamp, Big Pcs 15 28 Scotch Tape 2” Pcs 5 29 Packing Tape Pcs 2 30 Paper Fastener (plastic) Vinyl Coated, Big Boxes 4 31 Staple Wire # 35, Boxes 4 32 White Board Marking Pen (black) Pcs 2 33 Double Sided Tape (big) Pcs 12 34 Hard Drive, Usb 64gb Pcs 1 35 Cutter Big Pcs 3 36 Colored Marker Highlighter, Red, Green, Violet Pcs 1 37 Ballpen, Black, 0.5, Smooth Ink Dozens 5 38 Stamp Pad (big) Pcs 1 39 Pencil #2, Lead W/ Eraser, 1 Doz/box Boxes 2 40 Sticker Paper (white, Green, Orange) Packs 12 41 Specialty Paper Packs 3 42 White Ordinary Mailing Envelope, Long Pcs 50 43 Thumb Tacks, 100pcs/box Boxes 3 44 Photo Paper, Long 20 Pcs/pack Pack 5 45 Scissor, Big Pcs 2 46 Stapler #35, With Staple Wire Remover (big) Pcs 2 47 Masking Tape 1: Wide 50 Meters Long (big) Pcs 2 48 Push Pin Boxes 2 49 Feather Duster W/ Handle Plastic Pcs 1 50 Computer Mouse, Wireless Pcs 1 51 Soft Broom, Tiger Grass, Good Quality Pcs 1 52 Detergent Powder, Sachet, 57g Doz. 1 53 Trash Bag, Black, Large Pack 2 54 Board Paper White Short Pack 6 55 Air Freshener, Spray, 320/bottle Bottle 2 56 Bath Soap, Anti Bacteria, Big Pc 2 57 Dishwashing Liquid, Refill Pouch, 600 Ml Bot 1 58 Fabric Conditioner Dozen 1 59 Pencil Sharpener (office Stationary) Pcs 1 60 Molar File Pcs 21 61 Trash Can With Cover (big) Pc. 1 62 Expanded Folder ( Long) Pcs 75 63 Facsimile ( Certified True Copy) Pc 1 64 Highlighter ( Green & Blue) Pcs 2 75total Bid Amount: In Words: Prepared And Submitted By: ____________________________________ ___________________________ Signature Over Printed Name Name Of Firm ___________________________ Date Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Be: The Name Of The Contract Is Purchase Of Office Supplies For Mayor’s Office & Municipal Budget Office The Identification Number Of The Contract Is Bid No. 2025-009 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration, Or Any Of The Following Forms And Amounts: The Amount Of Not Less Than Twenty-three Thousand Fifty-seven Pesos And 10/100 (23,057.10) If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; Or The Amount Of Not Less Thirteen Thousand Eight Hundred Thirty-four Pesos And 26/100 (13,834.26) If Bid Security Is In Surety Bond. 19.3 In All Cases, The Nfcc Computation, If Applicable, Must Be Sufficient For All The Lots Or Contracts To Be Awarded To The Bidder. 20.2 Bidders Shall Submit License As Office Supplies 21.2 Additional Contract Documents Relevant To The Project That May Be Required By Existing Law And/or The Procuring Entity.

Details: Description Item No. Specification Statement Of Compliance “comply” Or “not Comply” 1 Supply, Delivery, Installation, Testing And Commissioning Of Supervisory Control And Data Acquisition (scada) System For Koronadal Public Market Water Supply System A. General 1. Scope A. The Scope Of Work Shall Be To Supply, Install, Test And Commission The Supervisory Control And Data Acquisition (scada) System For Koronadal Public Market. All The Required Parameters Shall Be Transmitted To City Of Koronadal Water District Main Office As The Central Command Center. B. The Scada System, In General, Performs The Following Tasks But Not Limited For Specified Parameters: I. Monitoring Functions Ii. Controlling Functions Iii. Graphical Displaying Functions Iv. Reporting Functions V. Alarming Functions Vi. Trending Functions Vii. Data Storage Viii. Other Related Functions That May Be Required By The Ckwd Not Stated Herein. 2. Conditions A. The System And Instruments Should Be Brand-new Specifically The Programmable Automation Controllers, Sensors, Variable Frequency Drives (vfd), Pumps, Motors, Electromagnetic Flowmeters, And Scada Software. B. The Supplier Shall Furnish All Labor, Materials, Tools, Equipment, Transport, Supplies And Other Services To Complete The Scada System And Shall Be Responsible For The Proper Installation Of The Supplied Equipment And Software. C. The Supplier Shall Install The Equipment And System Within One Hundred Twenty Days (120) Days After Signing Of Notice To Proceed (ntp). The 15-day Time Frame Shall Be Allotted In Order To Check The Proper Alignment Of The Pump/ Motor Assembly And Make Necessary Corrections Of Both Mechanical And Electrical Failures Found During Installation And Construction. The Supplier Shall Inform The Ckwd Measures And Proper Procedures On Its Operation To Guarantee A Smooth And Proper Function Of The Newly Installed Units And System. D. Field-testing Shall Be Made Once The Mounted Equipment Is Ready For Operation And When Both The Ckwd And Supplier Have Finished Their Scopes Of Work On The Installed Unit. During The Installation And Commissioning Of The Scada System, The Supplier Is Required To Assign A Technician Responsible For Overseeing The Commissioning Process. All Associated Costs, Including Transportation, Accommodation, Allowances, And Other Incidental Expenses, Shall Be Covered By The Supplier. E. The Supplier Shall Be Liable For Any Damages To Materials, Electro-mechanical Equipment’s Such As But Not Limited To Pumps And Motors, Variable Frequency Drive (vfd), Flowmeter, Level And Other Electro-mechanical Devices During Testing And Commissioning Of The Scada Project And Shall Be Required To Replace Immediately To Any Incur Defects Without Cost To Ckwd. All Incidental Expenses Including The Pulling Out And Transporting Of The Unit Shall Be Borne By The Supplier. F. In Accordance With The Electricity Safety Regulations, Supplier Is Strictly Prohibited From Connecting, Or Allowing To Remain Connected, Any Wiring Or Equipment In Unsafe Conditions To An Electrical Installation Or Power Supply. Additionally, To Control Hazardous Energy Sources, Standard Regulations Require That Machinery And Equipment Be Isolated From Their Energy Sources And Secured With A Lockout Or Tagout System Before Any Servicing Or Maintenance Is Performed. G. The Supplier Shall Provide A Comprehensive Warranty Covering All Parts And Labor For A Minimum Period Of One Year From The Date Of Delivery And Installation Of The Equipment And System. H. In Case Of Any Malfunction, Defect, Or Failure Of The Equipment And System During The Warranty Period, The Supplier Shall Offer Repair Services At No Additional Cost To The Buyer. I. The Supplier Must Respond To A Warranty Repair Request Within 24 Hours Of Notification By The Buyer. The Supplier Is Required To Complete The Repair Or Provide A Replacement Within A Maximum Lead Time Of 1 Week From The Time Of Notification. This Includes The Time For Diagnostics, Shipping Of Parts, And On-site Or Off-site Repair As Necessary. J. If The Repair Cannot Be Completed Within The 1-week Lead Time, The Supplier Must Provide A Temporary Replacement Of Equivalent Specifications At No Extra Cost To The Buyer, Until The Original Equipment Is Repaired And Returned To Full Working Condition. K. The Supplier Is Required To Maintain High Standards Of Housekeeping Throughout The Entire Project Duration. They Shall Be Fully Responsible For Managing And Securing Their Own Materials, Equipment, And Tools To Prevent Any Potential Accidents Or Safety Hazards In The Workplace. L. All Equipment/ Materials Must Be Brand New. 3. Location The Assembly Shall Be Installed At Koronadal Public Market, Purok Kaunlaran, Brgy. Zone I, City Of Koronadal. 4. List Of Major Components Item No. Item Quantity 4.a Programmable Logic Controller 1 4.b Human Machine Interface (hmi) 1 4.c Scada Software 1 4.d Workstation Pc 1 4.e Ethernet Switch 2 4.f Un-interruptible Power Supply 1 4.g Monitor 55" 1 4.h Wireless Antena (tx/rx) With Pole 2 4.i Variable Frequency Drive 2 4.j Pumps & Motors 2 4.k Water Level Monitoring Transmitter 4 4.l Electromagnetic Flowmeter 1 4.m Power Meter 1 4.n Fabricated Coated Panels W/ Complete Assembly 1 4.o Surge Protection Device 1 4.p Butterfly Valve With Actuators 2 4.q Pressure Transmitter 2 5. Major Components Specifications It Shall Meet The Following Operating Requirements: Description Specifications 5.a Programmable Logic Controller Digital Input 28 24 Vdc/vac Inputs, Up To 6 High Speed Counter Channels Relay Output 20 Relay Output Power Supply 24 Vdc Communication Embedded Usb Programming Port, Ethernet Port, Non-isolated Rs232/485 Serial Port Plug-in Ports 5 Plug-in Ports, Up To 4 Expansion Modules 5.b Human Machine Interface (hmi) Display 10.4 In. Display, Aluminum Panel With Resistive Touch Resolution 800x600 Or Higher Case Zinc-coated Skin Pass Steel Power Supply 24vdc (9 - 32vdc) Isolated Interface Ethernet: 2x Gigabit Ethernet (rj45), Usb: 2x Usb 3.0 (type-a / Host) Serial: 1x Rs232/422/485 (db9m) Isolated Operating Temperature 0° - 50°c Approvals Ce, Culus Listed, Ukca, Atex, Kc, Rcm 5.c Scada Software Scada Should Support Unlimited Displays, Unlimited Web Clients And Tags To Accommodate Future Integration With Our Pumping Stations. For Future Expansion, Scada System Shall Have Dual Monitor Capability To Provide Enhanced Visibility And Operational Efficiency. Data Logging To Odbc-compliant Database Such As Microsoft Sql Server Or Historian. 5.d Workstation Pc Cpu At Least 12th Gen Or Higher Intel Core I5 Storage (os) 256gb M.2 Gen 4 Nvme Ssd Storage (data) 2x1 Tb 7200 Rpm Hdd Or Higher Raid 0, 1, 5 Support Operating System Windows 10 Pro Or 11 Pro Memory 8gb Non-ecc Ddr5 Or Higher Display Output 2 X Displayport 1.4a Hbr2 Ports Ethernet Port Rj45 (1 Gbe) Ethernet Port Chassis/form Factor Tower 5.e Ethernet Switch Type Managed Switch Rj45 Ports Minimum 5x10/100baset Operating Temp -20 ~60 Deg. C Vlans Supported Secure Connectivity With Ssh And Https Supported 5.f Un-interruptible Power Supply Supplied Scada Product Must Have The Capacity/facility To Contain Battery-backed Memory For The Duration Of At Least One (1) Day Dedicated For The Plc's Programming And Configuration. System Must Be Able To Send Alerts For Power Outages. An Industrial Type Uninterruptible Power Supply (ups) Must Be Present For Plc Back-up For At Least Fifteen (15) Minutes. It Must Also Support Local And Remote Firmware Upgrade. 5.g Monitor Size: At Least 55" Mounting: Wall Mounted, Inclusive Of Installation 5.h Wireless Antenna (tx/rx) With Pole (communication Complete Set) Power Supply 24v, 0.3a Gigabit Poe Adapter Max. Power Consumption 7w Power Method Passive Poe Gain 23 Dbi Networking Interface (1) 10/100/1000 Ethernet Port Wind Survivability 200 Km/h Security Wpa2 Long-range Point-to-point (ptp) Link Mode 5.i Variable Frequency Drive Motor Power, Hp [kw] 1 Step Higher For 10hp Motor Ac Voltage Range 380v – 500v Voltage % Tolerance +10%, -15% Supply Number Of Phase 3 Phase Total Harmonic Current Distortion (thdi) 30 – 45% Prospective Short Circuit Current (kaic Rating) 65ka Nominal Current 52a Enclosure Rating Ip55 Local Control Panel W/mobile Phone Bluetooth Connectivity And Clear Display Vfd Features Motor Pre-heating Function Built-in Pid Control Built-in Safe Torque Off (sto) Function Full-text Diagnostic Display Dtc Control For Precise Torque Control And Enhance Energy Efficiency Removable Memory Unit For Faster Drive Replacement Digital Variable Frequency Drive That Is Scada Ready And Has Integrated Emc Filter. Complete Protection Against Over/under Voltage, Thermal Overcurrent, Lock Rotor, Ground Fault, Under Current, Definite Time Overcurrent. Digital Monitoring Of Voltage, Current, Frequency, Energy, Kw, And Fault History The Vfd Will Be Controlled Via Fieldbus. Status Updates, Diagnostic Faults, And Alarms Will Be Visible On Both The Hmi And Scada System. 5.j Pumps & Motors Number Of Pump And Motor 2 Units Pump Type Vertical In-line Maximum System Pressure 120 Psi Actual Calculated Flow 3.5 Liters Per Second Maximum Flow 5.0 Liters Per Second Mains Supply 230v Resulting Head Of Pump 35 Meters Head (maximum) 50 Meters Manifold Sizes (inlet And Outlet) 100 Mm Pump Parts In Contact With The Pump Liquid Made Of Stainless Steel Pump Bases And Heads Made Of Cast Iron; Other Vital Parts Are Made Of Stainless Steel Motor Rating 5 Hp, 230v, 3 Phase, 60 Hz 5.k Water Level Monitoring Transmitter Principle Radar Sensor Range Up To 8 Meters Output 4-20ma Beam Angle 8° Operating Voltage 12 - 35 V Dc Protection Rating Ip66 Or Higher Maintenance-free Operation Due To Non-contact 80 Ghz Radar Technology 5.l Electromagnetic Flowmeter Sensor Size Mm (in): 150 (6) Environment Protection Rating: Ip67/nema 6 Accuracy: ±0.2% Qmax (m3/hr): 700 Or Higher Qnominal (m3/hr): 600 Or Higher Qtransitional (m3/hr): 5 Qmin (m3/hr): 3.5 Or Lower Cable: 20 Meters (capable Upto 100m Or Higher) Flange Type Connection: Pn16 Lining Material: Elastomer Flange Material: Carbon Steel Housing Material: Carbon Steel Measurements: Direct/inverse Flow Transmitter Transmitter Mounting: Remote Power Supply: 85 To 265 V Ac Current Output: 4 To 20 Ma Security: Read-only Switch And Ultra-secure Service Password Digital Outputs: Three (3) Configurable Pulse/frequency And Alarm Outputs Fit-and-flow Data Storage Inside The Flow Meter Which Eliminates The Need To Match Sensor When Replace Self-calibrating Capabilities 5.m Power Meter Data Port Ethernet Interface Modbus Tcp Or Its Equivalent Supply Voltage 95-240v Ac; 110-340v Dc Digital Input 1 Or Higher Digital Output 1 Or Higher Degree Of Protection Ip65 Or Higher 5.n Fabricated Coated Panels W/ Complete Assembly Shall Provide Newly Fabricated Powder Coated Panels With A Complete Set Of Wiring Consumables For Network And Monitoring Of All Required Parameters. - Programmable Logic Controller - Human Machine Interface (hmi) - Io Modules - Circuit Breaker Protection - Power Meter - Surge Protection Device - Uninterruptible Power Supply - Exhaust Fan Shall Be Installed Inside The Control House And Shall Be Properly Ventilated 5.o Surge Protection Device Protection Performance Maximum Of 30 Microsecond Radius Of Protection 72 Meters Minimum 5.p Butterfly Valve With Actuators Size In (mm) 6” (150) Butterfly Valve Body Material Cast Iron Butterfly Disc Stainless Steel 304 Or 316 5.q Pressure Transmitter Measuring Range 0 To 16 Bar G (0 To 232 Psi G) Or 0 To 25 Bar G (0 To 363 Psi G) Current Output Signal 4-20 Ma Degree Of Protection Ip65 Or Higher 6. List Of Human Machine Interface (hmi) Alarms Item No. Alarm Descriptions 6.a Under Voltage 6.b Over Voltage 6.c Over Current 6.d Water Level Reservoir (cistern) Low Level 6.e Water Level Reservoir (cistern) High Level 6.f Water Level Right Building Low Level 6.g Water Level Right Building High Level 6.h Water Level Left Building Low Level 6.i Water Level Left Building High Level 6.j Discharge Line High Pressure 6.k Discharge Line Low Pressure 6.l Low/high Flowrate 6.m Submersible Motor Tripped 6.n Motor Control Panel High Temperature 6.o Motorized Valve (on/off Status) 6.p Vfd Alarms 7. System Architecture 8. Personnel Requirements The Contractor Shall Provide The Minimum Number Of Personnel For The Project, As Detailed In The Table Below. These Roles And Responsibilities Ensure Thorough Coverage Of All Project Aspects. Quantity Description 1 Project Engineer (pee) 2 Technical Engineers (electronics And Communications Engineer) 2 Technical Engineers (registered Electrical Engineer) To Ensure Qualified Personnel, All Professionals Must Have A Valid Unexpired Prc License. 9. Schedule Of Payment The Contract Duration Is One Hundred Twenty (120 Cd) Calendar Days Starting Upon Receipt Of Notice To Proceed. All Reports And Related Documents Must Be Submitted To The City Of Koronadal Water District Project Engineer And Should Be Officially Acknowledge Monthly. The Following Are The Schedule Of Payments: Payment Description Percentage Of Contract Price Remarks First Payment Upon Completion Of Item Orders 10% Must Submit Certification That All Components Are Ordered, Attached Proof Of Order From Suppliers Second Payment Upon Delivery Of All Items At Ckwd Facility 30% Must Compile And Submit All The Delivery Receipt Acknowledge By Ckwd Personnel Third Payment Upon Reaching 40% Of Project Accomplishment 30% Must Submit Certification That The Project Reached 40% Of Its Completion And Approved By The Ckwd Project Engineer Final Payment Upon Project Completion And Acceptance 30% With 5% Retention Upon Completion Total 100% B. Additional Requirements (compliance Upon Submission Of Bid) 1. Must Submit Original Catalog / Brochure For Vfd, Pump And Motor, Flowmeter, And Valve (please Specify Offered Product). 2. The Manufacturer Should Have Iso 9001:2015 Certificate Or Any Proof Of Renewal If Expired. 3. Minimum Manufacturer's Warranty Of One (1) Year. 4. Certification On Compliance To The Following: A. Reports: Indicate All The Fault Alarms From Vfd, Pressure, Flow, Level, And Other Protective Devices To Command Center. B. Trends And Data Logging: That Ckwd Will Provide The List Of Variables To Be Included In The Trend And Shall Be Logged Continuously In The Hard Drive For Historical Trending With Reference To The Monitoring Requirements. C. After Sales Service: After The Final Acceptance, The Contractor Shall Conduct A Monthly Site Visit Within The Warranty Period. The Contractor Shall Have 24/7 Availability Of Technical Engineers Within Mindanao Island. Must Submit Notarized Statement Of Undertaking Stipulating Availability Of Skilled Personnel Within Mindanao. D. Site Visit: The Bidder Shall Conduct A Site Visit/survey On Or Before The Pre-bid Conference Schedule To Ensure That They Know The Status/set Up Of The Project Site. Must Submit Certification Signed By Ckwd Project Engineer In-charge. E. Warranty: All Components Shall Be Guaranteed Against Defects In Workmanship And Materials For A Period Of One (1) Year From The Date Of Project Completion. Defective Components Or Parts Discovered Within The Warranty Period Shall Be Replaced Without Charge Or Additional Cost To Ckwd. 5. Bidders Qualifications: A. Must Submit Certification Or Any Document That The Bidder Has A Regional Presence Or A Regional Service/support Partner/center Within Mindanao. B. Bidder Must Be An Authorized Distributor From Manufacturer. Must Submit Certificate Of Distributorship. C. Bidder Must Have A Pcab License. D. Bidder Must Have An Experience Of Having Completed At Least Three (3) Contracts That Is Similar To The Contract To Be Bid. (indicate In The Form Of Statement Of All On-going Government & Private Contracts Including Contract Awarded But Not Yet Started.) E. Bidder Must Have Been In The Business For At Least Five (5) Years Of Providing Scada System Solution And Services In Government Or Private Sectors. Must Submit Dti Or Sec Registration. C. Additional Requirements (compliance Upon Delivery) 1. The Supplier’s Technical Representative Shall Be Present During Installation And Commissioning For Final Testing. 2. Must Submit Comprehensive Documentation, Including But Not Limited To Operation Manuals, Datasheets, And Manufacturers’ Certificates For All Electrical And Mechanical Components. 3. Trainings/transfer Of Technology: The Winning Bidder Shall Provide Inhouse Training On The Following Working Subject Matters: A. Plc And Scada Software Programming B. Installation C. Configuration D. Calibration E. Troubleshooting/operations And Maintenance All Associated Costs, Including Transportation, Accommodation, Allowances, And Other Incidental Expenses, Shall Be Covered By The Supplier.

Details: Description Invitation To Bid For 1. Contract Id No. : 25gme0026 Contract Name : Supply & Delivery Of Photocopier For Use Of Dpwh- Sarangani District Engineering Office Contract Location: Sarangani Province 2. Contract Id No. : 25gme0028 Contract Name : Supply & Delivery Of Vehicle Parts For Use Of Vehicles Of Dpwh-sarangani District Engineering Office Contract Location: Sarangani Province 3. Contract Id No. : 25gme0031 Contract Name : Supply & Delivery Of It Equipment For Use In Roads And Bridges-pavement Management System (pms) Calibration At Planning And Design Section, Dpwh-sarangani District Engineering Office Contract Location: Sarangani Province 4. Contract Id No. : 25gme0032 Contract Name : Supply & Delivery Of It Equipment For Use In Roads And Bridges-bridge Management System (bms) Assessment And Validation At Planning And Design Section, Dpwh-sarangani District Engineering Office Contract Location: Sarangani Province 5. Contract Id No. : 25gme0033 Contract Name : Supply & Delivery Of It Equipment For Use In Service For Automated Traffic Data Collection Program, Road Traffic Information Application (rtia) At Planning And Design Section, Dpwh-sarangani District Engineering Office Contract Location: Sarangani Province 1. The Dpwh Sarangani District Engineering Office, Through The Government Of The Philippines Fy2024 Intends To Apply The Sum Of: 1. P 759,000.00 2. P 739,760.00 3. P 95,000.00 4. P 95,000.00 5. P 195,000.00 Being The Abc’s To Payments Under The Contract For: 1. 25gme0026 – Supply & Delivery Of Photocopier For Use Of Dpwh- Sarangani District Engineering Office, Sarangani Province Qty/unit Description: 1 Unit Photocopier Specifications: Digital Full Color Copying/scanning/printing 36 Ppm (colour/b &w)- A4 18 Ppm (colour/b &w) – A3 1,150 Sheets Standard Paper Capacity 150 Sheet Bypass 1200x1200 Dpi Print Resolution Paper Size: A6-sra3; Banner 297mmx1200mm Paper Weight: 52-300 Gsm 100 Ipm (colour/b & W) Scanning Speed Automatic Duplex Printing Automated Duplex Document Feeder Mobile Printing: Airprint (ios), Mopria (android), Nfc Authentication And Printing (android) Scan T Email, Ftp. Box, Dpws, Webdav, Hdd, Usb, Smb, Twain Scan First Copy/print Time: 5.6 Sec With Electronic Stapler 1 Unit Photocopier Specifications: Digital Full Color Copying/scanning Printing 28 Ppm (colour/b & W) -simplex 18 Ppm (colour/b & W) -duplex 600 X 600 Dpi Copy Resolution Paper Size: A5-a3; Custom Sizes 14 Ipm (colour/b & W) Scanning Speed Automatic Duplex Printing Automated Duplex Document Feeder 256 Gradations: Airprint (ios), Mopria (android), Nfc With Electronic Stapler With Electronic Stapler 2. 25gme0028 – Supply & Delivery Of Vehicle Parts For Use Of Vehicles Of Dpwh-sarangani District Engineering Office, Alabel, Sarangani Province Qty/unit Description: 10 Pcs Tire 265/65 R17, Tubeless (8pr, 117/114s) 5 Pcs Tire 245/70 R16, Tubeless (8pr, 117/114 S) 5 Pcs Tire 265/60 R18, Tubeless (8pr, 117/114s) 8 Pcs Tire 265/65 R18 At, Tubeless (8pr, 207) 5 Pcs Tire 185 R14c, Tubeless (8pr, 102/100 R) 7 Pcs Tire 8.5 X 20 W/ Tube & Flap (h12-50) 10 Pcs Battery 12v – 13p (original) 3. 25gme0031 – Supply & Delivery Of It Equipment For Use In Roads And Bridges-pavement Management System (pms) Calibration At Planning And Design Section, Dpwh-sarangani District Engineering Office, Alabel, Sarangani Province Qty/unit Description: 1 Unit Laptop Computer With Mouse And Bag Specifications: Laptop Processor & Chipset: Core-i5 (13th Gen) Or Its Equivalent, Minimum Of 10-cores And 4.60 Ghz Max Turbo Frequency Internal Memory: 16gb Ddr4 Storage: 512gb Ssd Nvme M.2 Display & Graphics: 16” Diagonal Full High-definition Wide Screen Display Gpu 8gb, Dedicated Graphic Audio: Integrated High-definition Audio Support, Integrated Speakers And Integrated Digital Microphone Webcam: Integrated Widescreen Hd I/o Ports: 3 Usb (2 Type-a And 1 Type-c), Hdmi/display Port, Audio Port, Ethernet (rj-45) Network Interface: Bluetooth, And Wireless Lan (auto Detecting And Auto Sensing), Gigabit Ethernet Weight: Not More Than 1.9 Kg / 4.2 Lbs. Software: Operating System: Licensed Oem Windows 11 Professional 64-bit With Media Installer. Must Be Activated With Microsoft Prior To Delivery. Recovery Media: All Drivers And Utilities Must Be Stored In Any Electronic Storage Media. It Must Be Properly Labelled And Virus Free. Office Software: Microsoft Office Standard (latest Version) Under Cloud Solution Provider (csp) Agreement. The Licenses Must Be Perpetual And Transferable. It Must Be Licensed And Named After The Dpwh And Can Be Added To The Department's Existing Tenant Domain Dpwhgocph.onmicrosoft.com And Primary Domain Dpwh.gov.ph. The Supplier Must Present A Certificate As A Certified Csp Direct Partner In The Philippines. Accessories: Mouse: Optical With Mouse Pad (same Brand As The Laptop) Carry Case: Manufacturer's Standard Cable Adapter: Gigabit Ethernet Cable Adapter (for Laptop Models Without Ethernet Port) Headset: Headset With Microphone (1-meter Cable Length, With Noise Cancellation Feature, Audio Jack/usb Connections Type. Must Be Compatible With The Offered Laptop) Other Requirements: Brand And Model: Must Be An International Brand Name With Existence Of Atleast Ten (10) Years In The Philippines. It Must Be In The Current Catalog And Not End-of Life. A Manufacturer’s Certificate Is Required. Components: All Components Must Be The Same Brand As The Laptop And Factory Installed And New. The Supplier Is Not Allowed To Change Or Add Any Components To The Equipment. Regulatory: Energy Star Certified (with Energy Star Stamp). For Laptops That Do Not Carry Energy Star Label, An Appropriate Means Of Proof Of Energy Consumption Levels Shall Be Submitted Such As A Technical Dossier Of The Manufacturer Or A Test Report From A Recognized Body To Demonstrate Compliance With This Requirement. Documentation And Media: All Equipment Shall Be Supplied With Standard Manufacturer Documentation, On Any Electronic Storage Media And Hard Copy Version Where Available. Warranty And Maintenance: The Supplier Must Provide A 1-year Warranty On All Parts Including Mouse, Headset With Microphone, And Associated Software And Onsite Labor From The Date Of The Inspection And Acceptance Report (iar). In Any Case That The Laptop Needs To Be Pullout For Servicing, The Supplier Must Return The Unit Within Two (2)-weeks Or A Service Unit With The Same Or Higher Specifications Must Be Issued. Technical Support: The Local Technical Support Shall Include Telephone And Email, 8 Hours Per Day (8:00am - 5:00pm) 5 Days A Week (monday - Friday) For Problem Resolution. Support Shall Have A Response Time Of Next Business Day. 4. 25gme0032 – Supply & Delivery Of It Equipment For Use In Roads And Bridges-bridge Management System (bms) Assessment And Validation At Planning And Design Section, Dpwh-sarangani District Engineering Office, Alabel, Sarangani Province Qty/unit Description: 1 Unit Laptop Computer With Mouse And Bag Specifications: Laptop Processor & Chipset: Core-i5 (13th Gen) Or Its Equivalent, Minimum Of 10-cores And 4.60 Ghz Max Turbo Frequency Internal Memory: 16gb Ddr4 Storage: 512gb Ssd Nvme M.2 Display & Graphics: 16” Diagonal Full High-definition Wide Screen Display Gpu 8gb, Dedicated Graphic Audio: Integrated High-definition Audio Support, Integrated Speakers And Integrated Digital Microphone Webcam: Integrated Widescreen Hd I/o Ports: 3 Usb (2 Type-a And 1 Type-c), Hdmi/display Port, Audio Port, Ethernet (rj-45) Network Interface: Bluetooth, And Wireless Lan (auto Detecting And Auto Sensing), Gigabit Ethernet Weight: Not More Than 1.9 Kg / 4.2 Lbs. Software: Operating System: Licensed Oem Windows 11 Professional 64-bit With Media Installer. Must Be Activated With Microsoft Prior To Delivery. Recovery Media: All Drivers And Utilities Must Be Stored In Any Electronic Storage Media. It Must Be Properly Labelled And Virus Free. Office Software: Microsoft Office Standard (latest Version) Under Cloud Solution Provider (csp) Agreement. The Licenses Must Be Perpetual And Transferable. It Must Be Licensed And Named After The Dpwh And Can Be Added To The Department's Existing Tenant Domain Dpwhgocph.onmicrosoft.com And Primary Domain Dpwh.gov.ph. The Supplier Must Present A Certificate As A Certified Csp Direct Partner In The Philippines. Accessories: Mouse: Optical With Mouse Pad (same Brand As The Laptop) Carry Case: Manufacturer's Standard Cable Adapter: Gigabit Ethernet Cable Adapter (for Laptop Models Without Ethernet Port) Headset: Headset With Microphone (1-meter Cable Length, With Noise Cancellation Feature, Audio Jack/usb Connections Type. Must Be Compatible With The Offered Laptop) Other Requirements: Brand And Model: Must Be An International Brand Name With Existence Of Atleast Ten (10) Years In The Philippines. It Must Be In The Current Catalog And Not End-of Life. A Manufacturer’s Certificate Is Required. Components: All Components Must Be The Same Brand As The Laptop And Factory Installed And New. The Supplier Is Not Allowed To Change Or Add Any Components To The Equipment. Regulatory: Energy Star Certified (with Energy Star Stamp). For Laptops That Do Not Carry Energy Star Label, An Appropriate Means Of Proof Of Energy Consumption Levels Shall Be Submitted Such As A Technical Dossier Of The Manufacturer Or A Test Report From A Recognized Body To Demonstrate Compliance With This Requirement. Documentation And Media: All Equipment Shall Be Supplied With Standard Manufacturer Documentation, On Any Electronic Storage Media And Hard Copy Version Where Available. Warranty And Maintenance: The Supplier Must Provide A 1-year Warranty On All Parts Including Mouse, Headset With Microphone, And Associated Software And Onsite Labor From The Date Of The Inspection And Acceptance Report (iar). In Any Case That The Laptop Needs To Be Pullout For Servicing, The Supplier Must Return The Unit Within Two (2)-weeks Or A Service Unit With The Same Or Higher Specifications Must Be Issued. Technical Support: The Local Technical Support Shall Include Telephone And Email, 8 Hours Per Day (8:00am - 5:00pm) 5 Days A Week (monday - Friday) For Problem Resolution. Support Shall Have A Response Time Of Next Business Day. 5. 25gme0033 – Supply & Delivery Of It Equipment For Use In Service For Automated Traffic Data Collection Program, Road Traffic Information Application (rtia) At Planning And Design Section, Dpwh-sarangani District Engineering Office, Alabel, Sarangani Province Qty/unit Description: 1 Unit Laptop Computer With Mouse And Bag Specifications: Laptop Processor & Chipset: Core-i7 (13th Gen) Or Its Equivalent, Minimum Of 16-cores And 5.0 Ghz Max Turbo Frequency Internal Memory: 32gb Ddr5 Storage: 1 Tb Ssd Nvme M.2 Display & Graphics: 18" Diagonal Full High-definition Wide Screen Display; 8gb Gddr6 Dedicated Graphics Memory Audio: Integrated High-definition Audio Support, Integrated Speakers And Integrated Digital Microphone Webcam: Integrated Widescreen Hd I/o Ports: 3 Usb (2 Type-a And 1 Type-c), Hdmi/display Port, Audio Port, Ethernet (rj-45) Network Interface: Bluetooth, And Wireless Lan (auto Detecting And Auto Sensing), Gigabit Ethernet Weight: Not More Than 3.1 Kg / 6.8 Lbs. Software: Operating System: Licensed Oem Windows 11 Professional 64-bit With Media Installer. Must Be Activated With Microsoft Prior To Delivery. Recovery Media: All Drivers And Utilities Must Be Stored In Any Electronic Storage Media. It Must Be Properly Labelled And Virus Free. Office Software: Microsoft Office Standard (latest Version) Under Cloud Solution Provider (csp) Agreement. The Licenses Must Be Perpetual And Transferable. It Must Be Licensed And Named After The Dpwh And Can Be Added To The Department's Existing Tenant Domain Dpwhgocph.onmicrosoft.com And Primary Domain Dpwh.gov.ph. The Supplier Must Present A Certificate As A Certified Csp Direct Partner In The Philippines. Accessories: Mouse: Optical With Mouse Pad (same Brand As The Laptop) Carry Case: Manufacturer's Standard Cable Adapter: Gigabit Ethernet Cable Adapter (for Laptop Models Without Ethernet Port) Headset: Headset With Microphone (1-meter Cable Length, With Noise Cancellation Feature, Audio Jack/usb Connections Type. Must Be Compatible With The Offered Laptop) Other Requirements: Brand And Model: Must Be An International Brand Name With Existence Of Atleast Ten (10) Years In The Philippines. It Must Be In The Current Catalog And Not End-of Life. A Manufacturer’s Certificate Is Required. Components: All Components Must Be The Same Brand As The Laptop And Factory Installed And New. The Supplier Is Not Allowed To Change Or Add Any Components To The Equipment. Regulatory: Energy Star Certified (with Energy Star Stamp). For Laptops That Do Not Carry Energy Star Label, An Appropriate Means Of Proof Of Energy Consumption Levels Shall Be Submitted Such As A Technical Dossier Of The Manufacturer Or A Test Report From A Recognized Body To Demonstrate Compliance With This Requirement. Documentation And Media: All Equipment Shall Be Supplied With Standard Manufacturer Documentation, On Any Electronic Storage Media And Hard Copy Version Where Available. Warranty And Maintenance: The Supplier Must Provide A 1-year Warranty On All Parts Including Mouse, Headset With Microphone, And Associated Software And Onsite Labor From The Date Of The Inspection And Acceptance Report (iar). In Any Case That The Laptop Needs To Be Pullout For Servicing, The Supplier Must Return The Unit Within Two (2)-weeks Or A Service Unit With The Same Or Higher Specifications Must Be Issued. Technical Support: The Local Technical Support Shall Include Telephone And Email, 8 Hours Per Day (8:00am - 5:00pm) 5 Days A Week (monday - Friday) For Problem Resolution. Support Shall Have A Response Time Of Next Business Day. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh Sarangani District Engineering Office Now Invites Bids For The Above Procurement Project. Delivery Of Goods Required Is Twenty-five (25) Calendar Days For Item 1,2, 3, 4, 5. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Dpwh Sarangani District Engineering Office, Sarangani Province And Inspect The Bidding Documents At The Address Given Below During 8:00am To 5:00pm (office Hour). 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On February 05 – 12, 2025 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of: Project No. 1 -2 Php 1000.00 Project No. 3-5 Php 500.00 May Be Refunded In Accordance With The Guidelines Based On The Grounds Provided Under Section 41 Of The Republic Act 9184 And Its Implementing Rules And Regulations. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Electronically In The Email Address Given Below Or In Person. 6. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before February 12, 2025 @ 10:00 A.m. Late Bids Shall Not Be Accepted. 7. Bid Opening Shall Be On February 12, 2025 At Dpwh-sarangani Deo Conference Room And/or Through Video Conferencing Or Webcasting Via: Zoom Meeting Id: 937 563 6853 Password: Sgni22 Youtube Channel: Https://www.youtube.com/@sarangani Deo/streams 8. Bid Opening Shall Be On February 12, 2025, Immediately After The Deadline Of Submission Of Bids At Dpwh-sarangani Deo Conference Room And/or Via Zoom And Youtube Livestream Using The Details Above. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 9. The Dpwh Sarangani District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. For Further Information, Please Refer To: Reuben G. Salazar Acting Head, Procurement Unit, Dpwh – Sarangani Deo 9501, Kawas, Alabel, Sarangani Province Salazar.reuben@dpwh.gov.ph Contact Nos.: 083-892-5877 0905-553-0924 11. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.dpwh.gov.ph Www.philgeps.gov.ph Edward D. Carillo Engineer Iii, Chief Construction Section Bac Chairperson Date Of Publication: February 05 – 11, 2025.

Details: Description Invitation To Bid For 1. Contract Id No. : 25gme0026 Contract Name : Supply & Delivery Of Photocopier For Use Of Dpwh- Sarangani District Engineering Office Contract Location: Sarangani Province 2. Contract Id No. : 25gme0028 Contract Name : Supply & Delivery Of Vehicle Parts For Use Of Vehicles Of Dpwh-sarangani District Engineering Office Contract Location: Sarangani Province 3. Contract Id No. : 25gme0031 Contract Name : Supply & Delivery Of It Equipment For Use In Roads And Bridges-pavement Management System (pms) Calibration At Planning And Design Section, Dpwh-sarangani District Engineering Office Contract Location: Sarangani Province 4. Contract Id No. : 25gme0032 Contract Name : Supply & Delivery Of It Equipment For Use In Roads And Bridges-bridge Management System (bms) Assessment And Validation At Planning And Design Section, Dpwh-sarangani District Engineering Office Contract Location: Sarangani Province 5. Contract Id No. : 25gme0033 Contract Name : Supply & Delivery Of It Equipment For Use In Service For Automated Traffic Data Collection Program, Road Traffic Information Application (rtia) At Planning And Design Section, Dpwh-sarangani District Engineering Office Contract Location: Sarangani Province 1. The Dpwh Sarangani District Engineering Office, Through The Government Of The Philippines Fy2024 Intends To Apply The Sum Of: 1. P 759,000.00 2. P 739,760.00 3. P 95,000.00 4. P 95,000.00 5. P 195,000.00 Being The Abc’s To Payments Under The Contract For: 1. 25gme0026 – Supply & Delivery Of Photocopier For Use Of Dpwh- Sarangani District Engineering Office, Sarangani Province Qty/unit Description: 1 Unit Photocopier Specifications: Digital Full Color Copying/scanning/printing 36 Ppm (colour/b &w)- A4 18 Ppm (colour/b &w) – A3 1,150 Sheets Standard Paper Capacity 150 Sheet Bypass 1200x1200 Dpi Print Resolution Paper Size: A6-sra3; Banner 297mmx1200mm Paper Weight: 52-300 Gsm 100 Ipm (colour/b & W) Scanning Speed Automatic Duplex Printing Automated Duplex Document Feeder Mobile Printing: Airprint (ios), Mopria (android), Nfc Authentication And Printing (android) Scan T Email, Ftp. Box, Dpws, Webdav, Hdd, Usb, Smb, Twain Scan First Copy/print Time: 5.6 Sec With Electronic Stapler 1 Unit Photocopier Specifications: Digital Full Color Copying/scanning Printing 28 Ppm (colour/b & W) -simplex 18 Ppm (colour/b & W) -duplex 600 X 600 Dpi Copy Resolution Paper Size: A5-a3; Custom Sizes 14 Ipm (colour/b & W) Scanning Speed Automatic Duplex Printing Automated Duplex Document Feeder 256 Gradations: Airprint (ios), Mopria (android), Nfc With Electronic Stapler With Electronic Stapler 2. 25gme0028 – Supply & Delivery Of Vehicle Parts For Use Of Vehicles Of Dpwh-sarangani District Engineering Office, Alabel, Sarangani Province Qty/unit Description: 10 Pcs Tire 265/65 R17, Tubeless (8pr, 117/114s) 5 Pcs Tire 245/70 R16, Tubeless (8pr, 117/114 S) 5 Pcs Tire 265/60 R18, Tubeless (8pr, 117/114s) 8 Pcs Tire 265/65 R18 At, Tubeless (8pr, 207) 5 Pcs Tire 185 R14c, Tubeless (8pr, 102/100 R) 7 Pcs Tire 8.5 X 20 W/ Tube & Flap (h12-50) 10 Pcs Battery 12v – 13p (original) 3. 25gme0031 – Supply & Delivery Of It Equipment For Use In Roads And Bridges-pavement Management System (pms) Calibration At Planning And Design Section, Dpwh-sarangani District Engineering Office, Alabel, Sarangani Province Qty/unit Description: 1 Unit Laptop Computer With Mouse And Bag Specifications: Laptop Processor & Chipset: Core-i5 (13th Gen) Or Its Equivalent, Minimum Of 10-cores And 4.60 Ghz Max Turbo Frequency Internal Memory: 16gb Ddr4 Storage: 512gb Ssd Nvme M.2 Display & Graphics: 16” Diagonal Full High-definition Wide Screen Display Gpu 8gb, Dedicated Graphic Audio: Integrated High-definition Audio Support, Integrated Speakers And Integrated Digital Microphone Webcam: Integrated Widescreen Hd I/o Ports: 3 Usb (2 Type-a And 1 Type-c), Hdmi/display Port, Audio Port, Ethernet (rj-45) Network Interface: Bluetooth, And Wireless Lan (auto Detecting And Auto Sensing), Gigabit Ethernet Weight: Not More Than 1.9 Kg / 4.2 Lbs. Software: Operating System: Licensed Oem Windows 11 Professional 64-bit With Media Installer. Must Be Activated With Microsoft Prior To Delivery. Recovery Media: All Drivers And Utilities Must Be Stored In Any Electronic Storage Media. It Must Be Properly Labelled And Virus Free. Office Software: Microsoft Office Standard (latest Version) Under Cloud Solution Provider (csp) Agreement. The Licenses Must Be Perpetual And Transferable. It Must Be Licensed And Named After The Dpwh And Can Be Added To The Department's Existing Tenant Domain Dpwhgocph.onmicrosoft.com And Primary Domain Dpwh.gov.ph. The Supplier Must Present A Certificate As A Certified Csp Direct Partner In The Philippines. Accessories: Mouse: Optical With Mouse Pad (same Brand As The Laptop) Carry Case: Manufacturer's Standard Cable Adapter: Gigabit Ethernet Cable Adapter (for Laptop Models Without Ethernet Port) Headset: Headset With Microphone (1-meter Cable Length, With Noise Cancellation Feature, Audio Jack/usb Connections Type. Must Be Compatible With The Offered Laptop) Other Requirements: Brand And Model: Must Be An International Brand Name With Existence Of Atleast Ten (10) Years In The Philippines. It Must Be In The Current Catalog And Not End-of Life. A Manufacturer’s Certificate Is Required. Components: All Components Must Be The Same Brand As The Laptop And Factory Installed And New. The Supplier Is Not Allowed To Change Or Add Any Components To The Equipment. Regulatory: Energy Star Certified (with Energy Star Stamp). For Laptops That Do Not Carry Energy Star Label, An Appropriate Means Of Proof Of Energy Consumption Levels Shall Be Submitted Such As A Technical Dossier Of The Manufacturer Or A Test Report From A Recognized Body To Demonstrate Compliance With This Requirement. Documentation And Media: All Equipment Shall Be Supplied With Standard Manufacturer Documentation, On Any Electronic Storage Media And Hard Copy Version Where Available. Warranty And Maintenance: The Supplier Must Provide A 1-year Warranty On All Parts Including Mouse, Headset With Microphone, And Associated Software And Onsite Labor From The Date Of The Inspection And Acceptance Report (iar). In Any Case That The Laptop Needs To Be Pullout For Servicing, The Supplier Must Return The Unit Within Two (2)-weeks Or A Service Unit With The Same Or Higher Specifications Must Be Issued. Technical Support: The Local Technical Support Shall Include Telephone And Email, 8 Hours Per Day (8:00am - 5:00pm) 5 Days A Week (monday - Friday) For Problem Resolution. Support Shall Have A Response Time Of Next Business Day. 4. 25gme0032 – Supply & Delivery Of It Equipment For Use In Roads And Bridges-bridge Management System (bms) Assessment And Validation At Planning And Design Section, Dpwh-sarangani District Engineering Office, Alabel, Sarangani Province Qty/unit Description: 1 Unit Laptop Computer With Mouse And Bag Specifications: Laptop Processor & Chipset: Core-i5 (13th Gen) Or Its Equivalent, Minimum Of 10-cores And 4.60 Ghz Max Turbo Frequency Internal Memory: 16gb Ddr4 Storage: 512gb Ssd Nvme M.2 Display & Graphics: 16” Diagonal Full High-definition Wide Screen Display Gpu 8gb, Dedicated Graphic Audio: Integrated High-definition Audio Support, Integrated Speakers And Integrated Digital Microphone Webcam: Integrated Widescreen Hd I/o Ports: 3 Usb (2 Type-a And 1 Type-c), Hdmi/display Port, Audio Port, Ethernet (rj-45) Network Interface: Bluetooth, And Wireless Lan (auto Detecting And Auto Sensing), Gigabit Ethernet Weight: Not More Than 1.9 Kg / 4.2 Lbs. Software: Operating System: Licensed Oem Windows 11 Professional 64-bit With Media Installer. Must Be Activated With Microsoft Prior To Delivery. Recovery Media: All Drivers And Utilities Must Be Stored In Any Electronic Storage Media. It Must Be Properly Labelled And Virus Free. Office Software: Microsoft Office Standard (latest Version) Under Cloud Solution Provider (csp) Agreement. The Licenses Must Be Perpetual And Transferable. It Must Be Licensed And Named After The Dpwh And Can Be Added To The Department's Existing Tenant Domain Dpwhgocph.onmicrosoft.com And Primary Domain Dpwh.gov.ph. The Supplier Must Present A Certificate As A Certified Csp Direct Partner In The Philippines. Accessories: Mouse: Optical With Mouse Pad (same Brand As The Laptop) Carry Case: Manufacturer's Standard Cable Adapter: Gigabit Ethernet Cable Adapter (for Laptop Models Without Ethernet Port) Headset: Headset With Microphone (1-meter Cable Length, With Noise Cancellation Feature, Audio Jack/usb Connections Type. Must Be Compatible With The Offered Laptop) Other Requirements: Brand And Model: Must Be An International Brand Name With Existence Of Atleast Ten (10) Years In The Philippines. It Must Be In The Current Catalog And Not End-of Life. A Manufacturer’s Certificate Is Required. Components: All Components Must Be The Same Brand As The Laptop And Factory Installed And New. The Supplier Is Not Allowed To Change Or Add Any Components To The Equipment. Regulatory: Energy Star Certified (with Energy Star Stamp). For Laptops That Do Not Carry Energy Star Label, An Appropriate Means Of Proof Of Energy Consumption Levels Shall Be Submitted Such As A Technical Dossier Of The Manufacturer Or A Test Report From A Recognized Body To Demonstrate Compliance With This Requirement. Documentation And Media: All Equipment Shall Be Supplied With Standard Manufacturer Documentation, On Any Electronic Storage Media And Hard Copy Version Where Available. Warranty And Maintenance: The Supplier Must Provide A 1-year Warranty On All Parts Including Mouse, Headset With Microphone, And Associated Software And Onsite Labor From The Date Of The Inspection And Acceptance Report (iar). In Any Case That The Laptop Needs To Be Pullout For Servicing, The Supplier Must Return The Unit Within Two (2)-weeks Or A Service Unit With The Same Or Higher Specifications Must Be Issued. Technical Support: The Local Technical Support Shall Include Telephone And Email, 8 Hours Per Day (8:00am - 5:00pm) 5 Days A Week (monday - Friday) For Problem Resolution. Support Shall Have A Response Time Of Next Business Day. 5. 25gme0033 – Supply & Delivery Of It Equipment For Use In Service For Automated Traffic Data Collection Program, Road Traffic Information Application (rtia) At Planning And Design Section, Dpwh-sarangani District Engineering Office, Alabel, Sarangani Province Qty/unit Description: 1 Unit Laptop Computer With Mouse And Bag Specifications: Laptop Processor & Chipset: Core-i7 (13th Gen) Or Its Equivalent, Minimum Of 16-cores And 5.0 Ghz Max Turbo Frequency Internal Memory: 32gb Ddr5 Storage: 1 Tb Ssd Nvme M.2 Display & Graphics: 18" Diagonal Full High-definition Wide Screen Display; 8gb Gddr6 Dedicated Graphics Memory Audio: Integrated High-definition Audio Support, Integrated Speakers And Integrated Digital Microphone Webcam: Integrated Widescreen Hd I/o Ports: 3 Usb (2 Type-a And 1 Type-c), Hdmi/display Port, Audio Port, Ethernet (rj-45) Network Interface: Bluetooth, And Wireless Lan (auto Detecting And Auto Sensing), Gigabit Ethernet Weight: Not More Than 3.1 Kg / 6.8 Lbs. Software: Operating System: Licensed Oem Windows 11 Professional 64-bit With Media Installer. Must Be Activated With Microsoft Prior To Delivery. Recovery Media: All Drivers And Utilities Must Be Stored In Any Electronic Storage Media. It Must Be Properly Labelled And Virus Free. Office Software: Microsoft Office Standard (latest Version) Under Cloud Solution Provider (csp) Agreement. The Licenses Must Be Perpetual And Transferable. It Must Be Licensed And Named After The Dpwh And Can Be Added To The Department's Existing Tenant Domain Dpwhgocph.onmicrosoft.com And Primary Domain Dpwh.gov.ph. The Supplier Must Present A Certificate As A Certified Csp Direct Partner In The Philippines. Accessories: Mouse: Optical With Mouse Pad (same Brand As The Laptop) Carry Case: Manufacturer's Standard Cable Adapter: Gigabit Ethernet Cable Adapter (for Laptop Models Without Ethernet Port) Headset: Headset With Microphone (1-meter Cable Length, With Noise Cancellation Feature, Audio Jack/usb Connections Type. Must Be Compatible With The Offered Laptop) Other Requirements: Brand And Model: Must Be An International Brand Name With Existence Of Atleast Ten (10) Years In The Philippines. It Must Be In The Current Catalog And Not End-of Life. A Manufacturer’s Certificate Is Required. Components: All Components Must Be The Same Brand As The Laptop And Factory Installed And New. The Supplier Is Not Allowed To Change Or Add Any Components To The Equipment. Regulatory: Energy Star Certified (with Energy Star Stamp). For Laptops That Do Not Carry Energy Star Label, An Appropriate Means Of Proof Of Energy Consumption Levels Shall Be Submitted Such As A Technical Dossier Of The Manufacturer Or A Test Report From A Recognized Body To Demonstrate Compliance With This Requirement. Documentation And Media: All Equipment Shall Be Supplied With Standard Manufacturer Documentation, On Any Electronic Storage Media And Hard Copy Version Where Available. Warranty And Maintenance: The Supplier Must Provide A 1-year Warranty On All Parts Including Mouse, Headset With Microphone, And Associated Software And Onsite Labor From The Date Of The Inspection And Acceptance Report (iar). In Any Case That The Laptop Needs To Be Pullout For Servicing, The Supplier Must Return The Unit Within Two (2)-weeks Or A Service Unit With The Same Or Higher Specifications Must Be Issued. Technical Support: The Local Technical Support Shall Include Telephone And Email, 8 Hours Per Day (8:00am - 5:00pm) 5 Days A Week (monday - Friday) For Problem Resolution. Support Shall Have A Response Time Of Next Business Day. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh Sarangani District Engineering Office Now Invites Bids For The Above Procurement Project. Delivery Of Goods Required Is Twenty-five (25) Calendar Days For Item 1,2, 3, 4, 5. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Dpwh Sarangani District Engineering Office, Sarangani Province And Inspect The Bidding Documents At The Address Given Below During 8:00am To 5:00pm (office Hour). 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On February 05 – 12, 2025 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of: Project No. 1 -2 Php 1000.00 Project No. 3-5 Php 500.00 May Be Refunded In Accordance With The Guidelines Based On The Grounds Provided Under Section 41 Of The Republic Act 9184 And Its Implementing Rules And Regulations. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Electronically In The Email Address Given Below Or In Person. 6. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before February 12, 2025 @ 10:00 A.m. Late Bids Shall Not Be Accepted. 7. Bid Opening Shall Be On February 12, 2025 At Dpwh-sarangani Deo Conference Room And/or Through Video Conferencing Or Webcasting Via: Zoom Meeting Id: 937 563 6853 Password: Sgni22 Youtube Channel: Https://www.youtube.com/@sarangani Deo/streams 8. Bid Opening Shall Be On February 12, 2025, Immediately After The Deadline Of Submission Of Bids At Dpwh-sarangani Deo Conference Room And/or Via Zoom And Youtube Livestream Using The Details Above. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 9. The Dpwh Sarangani District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. For Further Information, Please Refer To: Reuben G. Salazar Acting Head, Procurement Unit, Dpwh – Sarangani Deo 9501, Kawas, Alabel, Sarangani Province Salazar.reuben@dpwh.gov.ph Contact Nos.: 083-892-5877 0905-553-0924 11. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.dpwh.gov.ph Www.philgeps.gov.ph Edward D. Carillo Engineer Iii, Chief Construction Section Bac Chairperson Date Of Publication: February 05 – 11, 2025.

Details: Description Lot 1 - Groceries - Abc : Php1,619,738.50 Item No. Quantity Unit Of Issue Item Description 1 643 Kg All Purpose Flour (1kg) 2 12 Kg Baking Powder (1kg) 3 240 Packs Burger Bun (6pcs/pack) 4 519 Packs Burger Patties (6pcs/container-228g) 5 87 Packs Cheese (22 Slices/pack) 6 46 Packs Chicken Nuggets Star Shape (200g/pack) 7 20 Kg Chicken Quarter Leg (/kg) 8 133 Packs Chicken Whole / Pack 9 8 Packs Cocoa Powder (500g) 10 185 Cans Condensed Creamer (390g) 11 51 Gallon Cooking Oil (4 L/gallon) 12 53 Packs Corn Starch (1kg/pack) 13 6 Packs Dry Yeast (800g) 14 99 Trays Egg (m-30pcs/tray) 15 149 Cans Evaporated Milk (370ml) 16 364 Packs Fishball (1kg/pack) 17 105 Packs French Fries (450g) 18 20 Packs Fresh Gata (200ml) 19 143 Kg Glutinous Rice (1kg) 20 366 Packs Hotdog - Cheese Flavor (250g/pack) 21 360 Packs Hotdog - Regular (250g/pack) 22 73 Packs Jumbo Siopao (10pcs/pack) 23 18 Gallon Ketchup (4 L/gallon 24 368 Packs Kikiam (500g/pack) 25 152 Packs Longganisa Skinless (450g/pack) 26 324 Packs Longganisa Smoked (225g/pack) 27 7 Kg Margarine Classic (1kg) 28 18 Gallon Mayonaise (3.5 L/gallon) 29 20 Kg Pork Meat (/kg) 30 10 Kg Pork Meat Grind (1kg) 31 25 Packs Pork Siomai Japanese (30pcs/pack) 32 371 Packs Pork Siomai Yellow (30pcs/pack) 33 212 Packs Pork Tocino (450g/pack) 34 100 Kg Raw Peanut /kg (for Peanut Butter Making) 35 180 Packs Shanghai (15pcs/pack) 36 519 Sacks Special Commercial Rice (25kg/sack) 37 35 Sack Sugar - Washed (25kg/sack) 38 35 Kg Sugar Brown (1kg) 39 11 Sacks Sugar White- Refined (25kg/sack) 40 238 Packs Sweet Ham (220g/pack) 41 7 Packs Whip Cream Powder (500g) 42 30 Sets (100 Pcs) 12 Oz Buko Cup Set, Printed White Plastic Cup With Lid And Sealer 43 1 Set 144 Pcs High Quality Puto Molder Multicolor Baking Tools For Puto Kutchinta Assorted Medium 44 1 Pcs 22cm Sifter For Baking Premium Quality Fine Mesh Stainless Steel Strainers With Wide Resting Ear Design - Strainer Wire Mesh - Fine Mesh Strainers 45 1 Set 236pcs Cake Kit With Decoration Icing Nozzle Set Pastry Bag Spatula Muffins Cupcake Molds Baking Supplies 46 4 Unit 32cm Non-stick Frying Pan 304 Stainless Steel Frying Pan Double Layer Full Mesh Pot Cooker 47 10 Sets 50pcs 8oz/ 232ml/ Small Plastic Peanut Butter Jar 48 2 Unit "makapal Palanggana Wash Basin Stainless Steel Supported Weight 8kg Dimension (l X W X H) 63cmx63cmx16cm" 49 2 Pcs 9 Inches Round Pan 50 10 Packs "aluminum Foil 5meters/8meters Wrap Food Grade Foil Wrapper Sheet Roll" 51 4 Unit Aluminum Frying Pan "kawa" 49cmx42cmx15cm Diameter 52 1 Set Bakeware Sets 10 Piece Non-stick Bakeware Set - Carbon Steel Baking Tray Set, Suitable For Oven, Refrigerator And Freezer 53 9 Pcs Baking Pan, Non Stick, Rectangular, 27.5x18x6cm 54 5 Pcs Stainless Basin 55cm 55 1 Pcs Big Pot, Double Handle Cast Iron Size #1, Big Kawali, Frying Pan Wok 56 1 Pcs "caldero/cauldron Pot Aluminum Double Handle (d1-d5) Size (diameter 34.5cm) Sizes (lxwxh) D1=37.5x34.5x23.5cm" 57 10 Dozen Drinkingware Coffee Mug Brown Coffee Cup 9oz/ 250ml 58 100 Pcs "peanut Butter Jar/ Orange Cup Cannister Condiments Container Large 624 Grams 650ml 22oz" 59 100 Pcs "peanut Butter Jar/ Orange Cup Cannister Condiments Container Medium 454 Grams 473ml 16oz" 60 100 Pcs "peanut Butter Jar/ Orange Cup Cannister Condiments Container Small 227 Grams 234ml 8oz" 61 12 Pcs Pie Pan 12"inch X 1 Inch Height 62 5 Set "plastic Puto Cups/ Baking Cups/ Kutsinta Cups Mold/ Sauce Dish/ Macaroons/ Pichi Pichi/ Soy Sauce Thick Plastic. Good Quality. Random Color Upon Order. 100pcs Per Order Medium #5-6cm" 63 1 Pcs S/s Soup Laddle With Wooden Handle 6oz 64 2 Pcs Special J.kawa 42"-44" 65 4 Pcs Stainless Bowl 55cm 66 1 Set Stainless Steel Measuring Cup Stackable Kitchen Measuring Tool 67 2 Unit Stainless Wok Pan And Non-stick (38cm, 1.6 Kg) 68 2 Set Steel Mixing Bowl Set Of 3 With Capacity Markings Indicator Lot 2: Equipment: Abc - Php1,130,920.00 Item No. Quantity Unit Of Issue Item Description 1 - 19 Unit 11kg Lpg Gas Tank With Content 2 - 1 Unit 2in1 Burger Griller With Deep Fryer (with Free Cooking Kits) 3 - 3 Unit "3 Layer Electric Steamer 9.0l Capacity 1.1l Water Tank Capacity Rapid Steam System Pp Body And Pc Tray See Through Water Window All Removable Parts Are Dishwasher Safe 60-minutes Times Heating And Power Lights Secure Non-slip Feet" 4 - 3 Unit "3.5 Cu.ft. Showcase Chiller 7-level Temperature Control, Double Glass Door Blower Fan, Led Light, Price Tag Shelves 3 Adjustable Coated Wire Shelves Clean Back Design, Fan-cooled System Recessed Handle, Internal & External Lamps Switch, Front Levelling Feet 100w Input Power " 5 - 15 Unit 3in1 Burger Griller With Deep Fryer And Steamer 6 - 1 Pcs 41cm Steamer - 3 Layer Aluminum 7 - 1 Unit "55l Electric Oven Tempered Glass Door Accessories: Bake Tray, Baking Rack, Tray/rack Handle, Rotisserie Stick And Rotisserie Fork Inner Dimension 420x340x290mm" 8 - 1 Unit "5l Electric Stand Mixer Net Weight (kg): 6.6 Kg Gross Weight (packed): 8.25 Kg Net Weight (wxhxd): 420x395x255 Mm (16.54x15.55x10.04in)" 9- 1 Unit 6.8 Cu.ft. Solid Top Chest Freezer/chiller 10 - 3 Unit 6ft. Folding Table 11 - 1 Unit "7 Speed Electric High Grade Super Hand Mixer Pancake/cupcake Batter Dispenser Whisk Chrome Beater Balloon Whisk He-133 *model: He-133 *body Material: Plastic *blade Material: Stainless Steel *rated Wattage: 260 Watts *rated Voltage: 220-240 Volts *gear Position: 7 Speed *rated Frequency: 50/60hz *controls Type: Knob Control *item Dimension Lxwxh: 18 X 6.5 X 12.1 Centimeters" 12 - 1 Unit "90 Liters Capacity Oven 250c Temperature Control 60 Min. Timer With Bell Ring With Convection And Rotisserie Function Inner Light/indicator Lamp Heater Selector Switch Tempered Glass Door Stainless Steel Heating Elements 5 Stages Of Switch Heating And Function Selector Accessories: Bake Tray 52.6 X 36.2 Cm 685x454x426mm Inner Dimension: 515x415x330mm Baking Racks, Tray/rack Handle, Rotisserie Stick And Rotisserie Forks" 13 - 2 Unit "blender 1.5-liter Glass Jar 2 Speed Control With Pulse Function Stainless Steel Blade Overheat Projector On Motor With Safety Lock Powerful Motor For Superior Blender" 14 - 1 Unit "boiler Coffee Maker And Tea Maker Perculator 7.0 Liter Double-layer Stainless Steel Wall Boil Dry Protection Switch Stainless Steel Lid With Lock Internal Water Gauge 1100 Watts" 15 - 1 Unit Cast Iron C40 Single Burner 16 - 1 Unit "chest Freezer 7.0 Cu.ft. Hd Inverter Solid Top *hd Inverter Compressor *dual Function Technology (freezer Or Chiller) *electric Control *galvanized Interior *led Light *roller Feet *recessed Handle With Key Lock *dimension (hxwxd) 85x91x55 Cm" 17 - 1 Unit Commercial Pressure Cooker High Quality 304 Stainless Steel Large Capacity Pressure Cooker 32cm 15 Liters 18 - 2 Unit Digital Weighing Scale 30kg 19 - 1 Unit "donut Maker 16 Hole Machine Double Sided Heating Doughnut Makers Breakfast Machine Hot Cake Waffle Maker Power: 1400w Voltage: 220-240v Plug Type: Eu Plug Power Source: Electric Color: Stainless Steel + Black Heating: Heating On Both Sides Materials: Non-stick Coated" 20 - 2 Unit Electric Oven 23l Heo23r 4 Function 23 Liters 21 - 11 Unit Electric Oven, 90 Liters Capacity, 120 Min Timer W/ Bell Ring 100-250c Temp Control 22 - 29 Unit Fc-06 Adf Chest Freezer 6 Cu.ft., Dual Function-freezer Or Chiller 8-level Frontal Temperature 23 - 1 Unit "food Dehydrator Voltage: 220v Frequency: 10 Layers 50hz Power: 800w Net Weight: 11kg Size: 380 X 400 X 465 Mm Stainless Steel Trays Outer Body Temperature: 30-90 Degress" 24 - 1 Unit Food Steamer Hfs-55 / 3 Level Food Steamer Food Steamer 10.0l Hfs55 25 - 2 Unit "four Layer Glass Box Organizer Display Four Layers, Each With A Height Of 15.25 Cm, A Length Of 61 Cm And A Width Of 23 Cm " 26- 5 Unit "heavy Duty Double Burner Stove G1000max 2 Twin Jet 120mm Black Cast Iron Burner Brass Burner Cap Automatic Piezo Ignition System Gas Power: 5.2 Kw #304 Stainless Steel Body Cast Iron Trivet Unit Dimension: 69.4(w) X 36(d) X 14.5(h) Cm Box Dimension: 75(w) X 46(d) X 17(h) Cm Net Weight: 6.1 Kg Gross Weight: 7.5 Kg" 27 - 10 Unit "heavy Duty Electric Stand Mixer 8-speed Multiple Function Stand Mixer 5-liter Stainless Bowl 600 Watts High-powered Motor Soft Start That Minimizes Splatter With Aluminum Dough Hooks And Beater Guard With Stainless Steel Wire Whisk" 28 - 1 Unit Heavy Duty Ice Crusher Machine 29 - 1 Unit "heavy Duty Rice Cooker 5.6l Irc-560n Teflex Non-stick Coating Pot Stainless Steel Body Cool Touch Handle Pilot Light Indicator 5.6 Liter Capacity Cooks Up To 30 Cups Of Rice Measurements: L48 X W39 X H30.5cm Model: Irc-560n 1950w" 30 - 1 Unit Heavy Duty Single Burner Cast Iron Autmatic Ignition Gas Stove 31 - 1 Unit "heavy Duty Steamer Makapal Matibay Aluminum 3 Layer Steamer Bottom Layer Is The Base 2nd And 3rd Layer Are The Steamer" 32 - 1 Unit "heavy Duty Wet And Dry Grinding Machine Pang Giling (corn, Rice, Coffee, Soyabeans, Peanut) 1.5hp, 220v" 33 - 1 Unit "ice Box Cooler Insulated W/ Free Ice Scoop 45l Material Plastic Volume Capacity 45l" 34 - 1 Unit "microwave Oven 20l Model: P70b20ap-st Voltage: 220v Capacity: 20l Power Source: 230-240v / 50hz/ 700-1200w" 35 - 1 Unit "peanut Butter Machine/ Sesame Sauce Grinder/ Pulping Machine/ Nuts Almond Milk Machine Model: Hr-160y Brand: Meatpro Power: 1.5kw Hz: 60hz Rotation Speed: 1450r/min Voltage: 220v Capacity: 35pkg/h Emery Wheel Diameter: 160mm" 36 - 1 Pcs "square Beach Umbrella 70” Classic Style Durable And Stylish Good Quality Perfect For Outdoor Use Light Weight. Easy To Carry Anywhere Perfect Protection From Sunlight And Rain Easy Set-up" 37 - 1 Unit "standard Double Gas Stove With Free Regulator Stainless Top And Front Double Detachable Top Burner 560mm X 380mm X 125mm" 38 - 2 Unit "steamer 3 Layers Aluminum Measurement: 36cm Diameter, 13cm Height Per Layer" 39 - 1 Unit "vacuum Sealer Machine With Seal Bags And Starter Kit Four Sealing Modes Longer Food Preservation Theory: Temperature Controller Usage: Household Power Type: None Display Size: 2.0-3.9 Inches Color: Silver Materials: Stainless Steel + Abs Shell Seal Length: Max. 30cm Vacuum Pressure:-85 Kpa" 40 - 25 Unit Weighing Scale (20kg) 41 - 3 Unit Weighing Scale 60kg Capacity Lot 3: Agricultural: Abc - Php313,940.00 Item No. Quantity Unit Of Issue Item Description 1 - 7 Sack 14-14-14 Fertilizer (50kg/sack) 2 - 1 Unit "2 In 1 Electrical And Manual Knapsack Sprayer Net Weight (kg): 5.25 Capacity Of Tank: 16l Working Pressure (mpa): 0.15-0.4 Pump: Diaphragm Pump Stroke: 1.4mm Voltage: 12 Nozzle: 1.4mm Battery: 12v / 8ah" 3 - 215 Meters Black Nylon Net (per Meter) 4 - 3 Rolls Gi Wire Gauge #14 5 - 1 Unit Grab Hoe, Heavy Duty, 23cm, Metal Handle 6 - 3 Unit "grass Cutter Gx35; Aircooled; 4 Cycle; Verticle Piston Vlave; Gasoline Engine; 31ml Maximum Output: 1.0/6500; Fuel Used: Gasoline Engine Fuel Tank Capacity (l): 76" 7 - 140 Kg Greenhouse Plastic, .04mil Thickness, Standard Size, Per Kilo 8 - 345 Kg Greenhouse Plastic, .05mil Thickness, Standard Size, Per Kilo 9 - 1 Unit Hand Tiller / Cultivator 7.5 Hp, Gasoline Engine Industrial Rotary Tiller Machine Cultivator Power Weeder With Complete Accessories 10 - 2 Unit Hand Tiller / Cultivator 7hp, Diesel Engine Industrila Rotary Tiller Machine Cultivator Machine 11 - 2 Rolls Rainbow Garden Hose / Water Hose 1/2" X 90m 12 - 8 Rolls Rainbow Garden Hose / Water Hose 3/4" X 60m 13 - 4 Unit Rake With Handle 14 - 1 Unit "rubber Garden Hose 1"" Heavy Duty Garden Hose Braided High Pressure Pvc Water Hose 50 Meters / Roll" 15 - 2 Unit "rubber Garden Hose 1/2"" Heavy Duty Garden Hose Braided High Pressure Pvc Water Hose 90 Meters / Roll" 16 - 2 Sacks Urea 50kg/sack Lot 4: Tarpaulin : Abc -ph9,360.00 Item No. Quantity Unit Of Issue Item Description 1 - 104 Pcs Tarpaulin (2ftx3ft)

Details: Description Invitation To Bid For 1. Contract Id No. : 25gme0026 Contract Name : Supply & Delivery Of Photocopier For Use Of Dpwh- Sarangani District Engineering Office Contract Location: Sarangani Province 2. Contract Id No. : 25gme0028 Contract Name : Supply & Delivery Of Vehicle Parts For Use Of Vehicles Of Dpwh-sarangani District Engineering Office Contract Location: Sarangani Province 3. Contract Id No. : 25gme0031 Contract Name : Supply & Delivery Of It Equipment For Use In Roads And Bridges-pavement Management System (pms) Calibration At Planning And Design Section, Dpwh-sarangani District Engineering Office Contract Location: Sarangani Province 4. Contract Id No. : 25gme0032 Contract Name : Supply & Delivery Of It Equipment For Use In Roads And Bridges-bridge Management System (bms) Assessment And Validation At Planning And Design Section, Dpwh-sarangani District Engineering Office Contract Location: Sarangani Province 5. Contract Id No. : 25gme0033 Contract Name : Supply & Delivery Of It Equipment For Use In Service For Automated Traffic Data Collection Program, Road Traffic Information Application (rtia) At Planning And Design Section, Dpwh-sarangani District Engineering Office Contract Location: Sarangani Province 1. The Dpwh Sarangani District Engineering Office, Through The Government Of The Philippines Fy2024 Intends To Apply The Sum Of: 1. P 759,000.00 2. P 739,760.00 3. P 95,000.00 4. P 95,000.00 5. P 195,000.00 Being The Abc’s To Payments Under The Contract For: 1. 25gme0026 – Supply & Delivery Of Photocopier For Use Of Dpwh- Sarangani District Engineering Office, Sarangani Province Qty/unit Description: 1 Unit Photocopier Specifications: Digital Full Color Copying/scanning/printing 36 Ppm (colour/b &w)- A4 18 Ppm (colour/b &w) – A3 1,150 Sheets Standard Paper Capacity 150 Sheet Bypass 1200x1200 Dpi Print Resolution Paper Size: A6-sra3; Banner 297mmx1200mm Paper Weight: 52-300 Gsm 100 Ipm (colour/b & W) Scanning Speed Automatic Duplex Printing Automated Duplex Document Feeder Mobile Printing: Airprint (ios), Mopria (android), Nfc Authentication And Printing (android) Scan T Email, Ftp. Box, Dpws, Webdav, Hdd, Usb, Smb, Twain Scan First Copy/print Time: 5.6 Sec With Electronic Stapler 1 Unit Photocopier Specifications: Digital Full Color Copying/scanning Printing 28 Ppm (colour/b & W) -simplex 18 Ppm (colour/b & W) -duplex 600 X 600 Dpi Copy Resolution Paper Size: A5-a3; Custom Sizes 14 Ipm (colour/b & W) Scanning Speed Automatic Duplex Printing Automated Duplex Document Feeder 256 Gradations: Airprint (ios), Mopria (android), Nfc With Electronic Stapler With Electronic Stapler 2. 25gme0028 – Supply & Delivery Of Vehicle Parts For Use Of Vehicles Of Dpwh-sarangani District Engineering Office, Alabel, Sarangani Province Qty/unit Description: 10 Pcs Tire 265/65 R17, Tubeless (8pr, 117/114s) 5 Pcs Tire 245/70 R16, Tubeless (8pr, 117/114 S) 5 Pcs Tire 265/60 R18, Tubeless (8pr, 117/114s) 8 Pcs Tire 265/65 R18 At, Tubeless (8pr, 207) 5 Pcs Tire 185 R14c, Tubeless (8pr, 102/100 R) 7 Pcs Tire 8.5 X 20 W/ Tube & Flap (h12-50) 10 Pcs Battery 12v – 13p (original) 3. 25gme0031 – Supply & Delivery Of It Equipment For Use In Roads And Bridges-pavement Management System (pms) Calibration At Planning And Design Section, Dpwh-sarangani District Engineering Office, Alabel, Sarangani Province Qty/unit Description: 1 Unit Laptop Computer With Mouse And Bag Specifications: Laptop Processor & Chipset: Core-i5 (13th Gen) Or Its Equivalent, Minimum Of 10-cores And 4.60 Ghz Max Turbo Frequency Internal Memory: 16gb Ddr4 Storage: 512gb Ssd Nvme M.2 Display & Graphics: 16” Diagonal Full High-definition Wide Screen Display Gpu 8gb, Dedicated Graphic Audio: Integrated High-definition Audio Support, Integrated Speakers And Integrated Digital Microphone Webcam: Integrated Widescreen Hd I/o Ports: 3 Usb (2 Type-a And 1 Type-c), Hdmi/display Port, Audio Port, Ethernet (rj-45) Network Interface: Bluetooth, And Wireless Lan (auto Detecting And Auto Sensing), Gigabit Ethernet Weight: Not More Than 1.9 Kg / 4.2 Lbs. Software: Operating System: Licensed Oem Windows 11 Professional 64-bit With Media Installer. Must Be Activated With Microsoft Prior To Delivery. Recovery Media: All Drivers And Utilities Must Be Stored In Any Electronic Storage Media. It Must Be Properly Labelled And Virus Free. Office Software: Microsoft Office Standard (latest Version) Under Cloud Solution Provider (csp) Agreement. The Licenses Must Be Perpetual And Transferable. It Must Be Licensed And Named After The Dpwh And Can Be Added To The Department's Existing Tenant Domain Dpwhgocph.onmicrosoft.com And Primary Domain Dpwh.gov.ph. The Supplier Must Present A Certificate As A Certified Csp Direct Partner In The Philippines. Accessories: Mouse: Optical With Mouse Pad (same Brand As The Laptop) Carry Case: Manufacturer's Standard Cable Adapter: Gigabit Ethernet Cable Adapter (for Laptop Models Without Ethernet Port) Headset: Headset With Microphone (1-meter Cable Length, With Noise Cancellation Feature, Audio Jack/usb Connections Type. Must Be Compatible With The Offered Laptop) Other Requirements: Brand And Model: Must Be An International Brand Name With Existence Of Atleast Ten (10) Years In The Philippines. It Must Be In The Current Catalog And Not End-of Life. A Manufacturer’s Certificate Is Required. Components: All Components Must Be The Same Brand As The Laptop And Factory Installed And New. The Supplier Is Not Allowed To Change Or Add Any Components To The Equipment. Regulatory: Energy Star Certified (with Energy Star Stamp). For Laptops That Do Not Carry Energy Star Label, An Appropriate Means Of Proof Of Energy Consumption Levels Shall Be Submitted Such As A Technical Dossier Of The Manufacturer Or A Test Report From A Recognized Body To Demonstrate Compliance With This Requirement. Documentation And Media: All Equipment Shall Be Supplied With Standard Manufacturer Documentation, On Any Electronic Storage Media And Hard Copy Version Where Available. Warranty And Maintenance: The Supplier Must Provide A 1-year Warranty On All Parts Including Mouse, Headset With Microphone, And Associated Software And Onsite Labor From The Date Of The Inspection And Acceptance Report (iar). In Any Case That The Laptop Needs To Be Pullout For Servicing, The Supplier Must Return The Unit Within Two (2)-weeks Or A Service Unit With The Same Or Higher Specifications Must Be Issued. Technical Support: The Local Technical Support Shall Include Telephone And Email, 8 Hours Per Day (8:00am - 5:00pm) 5 Days A Week (monday - Friday) For Problem Resolution. Support Shall Have A Response Time Of Next Business Day. 4. 25gme0032 – Supply & Delivery Of It Equipment For Use In Roads And Bridges-bridge Management System (bms) Assessment And Validation At Planning And Design Section, Dpwh-sarangani District Engineering Office, Alabel, Sarangani Province Qty/unit Description: 1 Unit Laptop Computer With Mouse And Bag Specifications: Laptop Processor & Chipset: Core-i5 (13th Gen) Or Its Equivalent, Minimum Of 10-cores And 4.60 Ghz Max Turbo Frequency Internal Memory: 16gb Ddr4 Storage: 512gb Ssd Nvme M.2 Display & Graphics: 16” Diagonal Full High-definition Wide Screen Display Gpu 8gb, Dedicated Graphic Audio: Integrated High-definition Audio Support, Integrated Speakers And Integrated Digital Microphone Webcam: Integrated Widescreen Hd I/o Ports: 3 Usb (2 Type-a And 1 Type-c), Hdmi/display Port, Audio Port, Ethernet (rj-45) Network Interface: Bluetooth, And Wireless Lan (auto Detecting And Auto Sensing), Gigabit Ethernet Weight: Not More Than 1.9 Kg / 4.2 Lbs. Software: Operating System: Licensed Oem Windows 11 Professional 64-bit With Media Installer. Must Be Activated With Microsoft Prior To Delivery. Recovery Media: All Drivers And Utilities Must Be Stored In Any Electronic Storage Media. It Must Be Properly Labelled And Virus Free. Office Software: Microsoft Office Standard (latest Version) Under Cloud Solution Provider (csp) Agreement. The Licenses Must Be Perpetual And Transferable. It Must Be Licensed And Named After The Dpwh And Can Be Added To The Department's Existing Tenant Domain Dpwhgocph.onmicrosoft.com And Primary Domain Dpwh.gov.ph. The Supplier Must Present A Certificate As A Certified Csp Direct Partner In The Philippines. Accessories: Mouse: Optical With Mouse Pad (same Brand As The Laptop) Carry Case: Manufacturer's Standard Cable Adapter: Gigabit Ethernet Cable Adapter (for Laptop Models Without Ethernet Port) Headset: Headset With Microphone (1-meter Cable Length, With Noise Cancellation Feature, Audio Jack/usb Connections Type. Must Be Compatible With The Offered Laptop) Other Requirements: Brand And Model: Must Be An International Brand Name With Existence Of Atleast Ten (10) Years In The Philippines. It Must Be In The Current Catalog And Not End-of Life. A Manufacturer’s Certificate Is Required. Components: All Components Must Be The Same Brand As The Laptop And Factory Installed And New. The Supplier Is Not Allowed To Change Or Add Any Components To The Equipment. Regulatory: Energy Star Certified (with Energy Star Stamp). For Laptops That Do Not Carry Energy Star Label, An Appropriate Means Of Proof Of Energy Consumption Levels Shall Be Submitted Such As A Technical Dossier Of The Manufacturer Or A Test Report From A Recognized Body To Demonstrate Compliance With This Requirement. Documentation And Media: All Equipment Shall Be Supplied With Standard Manufacturer Documentation, On Any Electronic Storage Media And Hard Copy Version Where Available. Warranty And Maintenance: The Supplier Must Provide A 1-year Warranty On All Parts Including Mouse, Headset With Microphone, And Associated Software And Onsite Labor From The Date Of The Inspection And Acceptance Report (iar). In Any Case That The Laptop Needs To Be Pullout For Servicing, The Supplier Must Return The Unit Within Two (2)-weeks Or A Service Unit With The Same Or Higher Specifications Must Be Issued. Technical Support: The Local Technical Support Shall Include Telephone And Email, 8 Hours Per Day (8:00am - 5:00pm) 5 Days A Week (monday - Friday) For Problem Resolution. Support Shall Have A Response Time Of Next Business Day. 5. 25gme0033 – Supply & Delivery Of It Equipment For Use In Service For Automated Traffic Data Collection Program, Road Traffic Information Application (rtia) At Planning And Design Section, Dpwh-sarangani District Engineering Office, Alabel, Sarangani Province Qty/unit Description: 1 Unit Laptop Computer With Mouse And Bag Specifications: Laptop Processor & Chipset: Core-i7 (13th Gen) Or Its Equivalent, Minimum Of 16-cores And 5.0 Ghz Max Turbo Frequency Internal Memory: 32gb Ddr5 Storage: 1 Tb Ssd Nvme M.2 Display & Graphics: 18" Diagonal Full High-definition Wide Screen Display; 8gb Gddr6 Dedicated Graphics Memory Audio: Integrated High-definition Audio Support, Integrated Speakers And Integrated Digital Microphone Webcam: Integrated Widescreen Hd I/o Ports: 3 Usb (2 Type-a And 1 Type-c), Hdmi/display Port, Audio Port, Ethernet (rj-45) Network Interface: Bluetooth, And Wireless Lan (auto Detecting And Auto Sensing), Gigabit Ethernet Weight: Not More Than 3.1 Kg / 6.8 Lbs. Software: Operating System: Licensed Oem Windows 11 Professional 64-bit With Media Installer. Must Be Activated With Microsoft Prior To Delivery. Recovery Media: All Drivers And Utilities Must Be Stored In Any Electronic Storage Media. It Must Be Properly Labelled And Virus Free. Office Software: Microsoft Office Standard (latest Version) Under Cloud Solution Provider (csp) Agreement. The Licenses Must Be Perpetual And Transferable. It Must Be Licensed And Named After The Dpwh And Can Be Added To The Department's Existing Tenant Domain Dpwhgocph.onmicrosoft.com And Primary Domain Dpwh.gov.ph. The Supplier Must Present A Certificate As A Certified Csp Direct Partner In The Philippines. Accessories: Mouse: Optical With Mouse Pad (same Brand As The Laptop) Carry Case: Manufacturer's Standard Cable Adapter: Gigabit Ethernet Cable Adapter (for Laptop Models Without Ethernet Port) Headset: Headset With Microphone (1-meter Cable Length, With Noise Cancellation Feature, Audio Jack/usb Connections Type. Must Be Compatible With The Offered Laptop) Other Requirements: Brand And Model: Must Be An International Brand Name With Existence Of Atleast Ten (10) Years In The Philippines. It Must Be In The Current Catalog And Not End-of Life. A Manufacturer’s Certificate Is Required. Components: All Components Must Be The Same Brand As The Laptop And Factory Installed And New. The Supplier Is Not Allowed To Change Or Add Any Components To The Equipment. Regulatory: Energy Star Certified (with Energy Star Stamp). For Laptops That Do Not Carry Energy Star Label, An Appropriate Means Of Proof Of Energy Consumption Levels Shall Be Submitted Such As A Technical Dossier Of The Manufacturer Or A Test Report From A Recognized Body To Demonstrate Compliance With This Requirement. Documentation And Media: All Equipment Shall Be Supplied With Standard Manufacturer Documentation, On Any Electronic Storage Media And Hard Copy Version Where Available. Warranty And Maintenance: The Supplier Must Provide A 1-year Warranty On All Parts Including Mouse, Headset With Microphone, And Associated Software And Onsite Labor From The Date Of The Inspection And Acceptance Report (iar). In Any Case That The Laptop Needs To Be Pullout For Servicing, The Supplier Must Return The Unit Within Two (2)-weeks Or A Service Unit With The Same Or Higher Specifications Must Be Issued. Technical Support: The Local Technical Support Shall Include Telephone And Email, 8 Hours Per Day (8:00am - 5:00pm) 5 Days A Week (monday - Friday) For Problem Resolution. Support Shall Have A Response Time Of Next Business Day. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh Sarangani District Engineering Office Now Invites Bids For The Above Procurement Project. Delivery Of Goods Required Is Twenty-five (25) Calendar Days For Item 1,2, 3, 4, 5. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Dpwh Sarangani District Engineering Office, Sarangani Province And Inspect The Bidding Documents At The Address Given Below During 8:00am To 5:00pm (office Hour). 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On February 05 – 12, 2025 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of: Project No. 1 -2 Php 1000.00 Project No. 3-5 Php 500.00 May Be Refunded In Accordance With The Guidelines Based On The Grounds Provided Under Section 41 Of The Republic Act 9184 And Its Implementing Rules And Regulations. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Electronically In The Email Address Given Below Or In Person. 6. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before February 12, 2025 @ 10:00 A.m. Late Bids Shall Not Be Accepted. 7. Bid Opening Shall Be On February 12, 2025 At Dpwh-sarangani Deo Conference Room And/or Through Video Conferencing Or Webcasting Via: Zoom Meeting Id: 937 563 6853 Password: Sgni22 Youtube Channel: Https://www.youtube.com/@sarangani Deo/streams 8. Bid Opening Shall Be On February 12, 2025, Immediately After The Deadline Of Submission Of Bids At Dpwh-sarangani Deo Conference Room And/or Via Zoom And Youtube Livestream Using The Details Above. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 9. The Dpwh Sarangani District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. For Further Information, Please Refer To: Reuben G. Salazar Acting Head, Procurement Unit, Dpwh – Sarangani Deo 9501, Kawas, Alabel, Sarangani Province Salazar.reuben@dpwh.gov.ph Contact Nos.: 083-892-5877 0905-553-0924 11. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.dpwh.gov.ph Www.philgeps.gov.ph Edward D. Carillo Engineer Iii, Chief Construction Section Bac Chairperson Date Of Publication: February 05 – 11, 2025.

Details: Description 1.the National Library Of The Philippines (nlp), Through The Authorized Appropriation For Fy 2025 General Appropriations Act (gaa) Intends To Apply The Sum Of Five Million Nine Hundred Twelve Thousand Six Hundred Fifty-six Pesos (php5,912,656.00) Being The Approved Budget Contract (abc) To Payments Under The Contract For Pb25-01 Supply And Delivery, Installation And Commissioning Of Ict Equipment And Services For The Rehabilitation And Upgrade Of Network Infrastructure. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. No. Project Description Abc Cost Of Bidding Docs Bid Opening Venue 1 Supply And Delivery, Installation And Commissioning Of Ict Equipment And Services For The Rehabilitation And Upgrade Of Network Infrastructure Php5,912,656.00 Php10,000.00 February 26, 2025; 10:00 Am Nlp Building, T.m. Kalaw St. Ermita, Manila 2.the Nlp Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within Five (5) Months Upon Receipt Of Purchase Order. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3.bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A.bidding Is Restricted To Filipino Citizens/sole Proprietorship, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4.prospective Bidders May Obtain Further Information From The Nlp Bids And Awards Committee (bac) Secretariat Email Address And Inspect The Bidding Documents Posted At The Philippine Government Electronic Procurement System (philgeps) And In Our Official Website At Https://web.nlp.gov.ph/. 5.a Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On February 5, 2025 From The Given Address And Website Below And Upon Payment Of A Nonrefundable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Through Email. 6.the Nlp Will Hold An Online Pre-bid Conference On February 13, 2025 At 10:00 Am Through Videoconferencing Which Shall Be Open To All Prospective Bidders. Express Interest By Sending An Email To Bac@nlp.gov.ph With The Subject: Request To Join The Pre-bid Conference For Public Bidding No. 25-01. 7.bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Provided Below On Or Before 10:00 Am Of February 26, 2025. Submit A Soft Copy Of Technical (in Pdf) And Financial (in Word Or Excel) Requirements In Usb Flash Drive. Late Bids Shall Not Be Accepted. 8.all Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9.bid Opening Shall Be On February 26, 2025, 10:01 Am At The Nlp Building, T.m. Kalaw St., Ermita, Manila. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10.the Nlp Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11.for Further Information, Please Refer To: Maureen C. Terrenal Marie Joy H. Bestoir Eleanor C. Siyang Jonathan F. Santos Bac Secretariat National Library Of The Philippines Tel. No.: (02) 5314-2100 Loc. 114/406 / 412 Email: Bac@nlp.gov.ph Website: Https://web.nlp.gov.ph/ 12.you May Visit The Following Websites To Download The Bidding Document: Https://web.nlp.gov.ph/category/bids_opportunities/ Https://notices.philgeps.gov.ph/ (sgd.) Maricel M. Ureña Bac Chairperson 1. Distribution Frames: Ÿstrategic Positioning Of New Four (4) Free Standing Closed-type Data Cabinet At Data Center & Four (4) Wall-mount Intermediate Distribution Frame Enclosures To Proposed Location & Positions At The 3rd Floor Of Bldg#1 (1), Cctv Command Center (1) At Ground Floor, & 9th Floor (1), Bldg#2 & Ams Hall (1) At Bldg#3 Considering The Cable Backbone Cable Length Limitations, Aesthetic, Security, & Accessibility Ÿfree-standing Closed-type Data Cabinet (42ru) 800mmw X 1000mmd X 2055mmh, With 2 Rear Vertical Wire Manager, Vertical Pdu (14-3prong Universal Outlets) With Twist Locks, Perforated Single-swing Front & Double-swing Rear Doors W/ Lock, Perforated Side Panels, Caster Wheel And Leveling Feet, 3 Shelves, 4-exhaust / Ventilation Fans, Powder Coated (black), & M6 Mounting Screws. 4 Ÿwall-mounted Data Cabinet (3ft) W-600mm X D-600mm X H-900, With Vertical Pdu (8-3prong Universal Outlets), Tinted Acrylic Door With Push Lock, 2sets Exhaust /ventilation Fans, Detachable Side Panels, Powder Coated (black), & Mounting Screws. 4 2. Distribution Frames Power Supply Wiring Four (4) Free Standing Closed-type Data Cabinet Ÿsupply & Cable Pulling Of #12awg/3c Royal Cord In 25mm-dia Pvc Pipe From The Existing Ups Located At Data Center To The Proposed Location & Position Of The Above 4 X Free Standing Closed-type Data Cabinet (each). These Include The Needed Pipe Supports, Fittings, & Others Consumable Materials Required In The Proposed Installations. Ÿsupply, Mounting, & End To End Terminations Of Below Wiring & Accessories. Continuity & Insulation Testing Four (4) Wall-mount Closed-type Intermediate Distribution Frame Ÿsupply & Cable Pulling Of #12awg/3c Royal Cord In 25mm-dia Pvc Pipe From The Existing Ups Located At Data Center To The Proposed Location & Position Of The Above Four (4) Wall-mount Closed-type Intermediate Distribution Frame (each). These Include The Needed Pipe Supports, Fittings, & Others Consumable Materials Required In The Proposed Installations. Ÿsupply, Mounting, & End To End Terminations Of Below Wiring & Accessories. Continuity & Insulation Testing Lot Wiring Components: Ÿtwist Lock, 3prong Power Outlet With Face Plate (wide Series) Ÿtop Of The Line Brand Of #12awg/3c Royal Cord Ÿheavy Duty C20 Plug Ÿ25mm-dia Pvc Pipe “thickwall” Ÿ25mm-dia Pvc Long Sweep Elbow Ÿ25mm-dia Caddy Clamp Ÿfs Surface Mount Box Ÿpvc Square Box With Cover Ÿ10mm Full-threaded Round Bar Ÿ10mm Grip Anchor Ÿ10mm Screw Nuts & Washer Ÿconsumables (restoration Materials, Gi Wires, Hacksaw Blades, Electrical & Masking Tapes, Cable Ties, Drill Bits, Cutting & Grinding Disk, Mounting Brackets & Screws, Bolt & Nuts, Etc. 1 3. Network And Ip-based Application Backbone Cabling Ÿsupply & Layout Of 50mm-dia (common) & 25mm-dia (distribution) Pvc Pipes Required For The New Network & Ip-based Applications - Fiber Optic Backbone Cable Pathways From The Main Network-distribution Frame Cabinet At Data Center To The Existing & Proposed Locations Of Intermediate Distribution Frames At Bldg#1 (3rd Floor)(1), Bldg#2 (ground Floor (cctv Command Center)(1) & (9th Floor)(1), Bldg#3 (ground Floor-one Stop Shop/shared Space)(1), Ams Hall (ground Floor)(1), (3rd Floor)(1) & (2nd Floor)(1). These Include Required Chipping & Restoration Of Walls & Slabs, Supports, Boxes, Fittings, & Consumable Materials Required In The Proposed Installations. Ÿsupply Of Labor For The & Layout Of New 6core Fiber Optic Cable (each) From The Main Network-distribution Frame Cabinet At Data Center To The Existing & Proposed Locations Of New Intermediate Distribution Frames At Bldg#1 (3rd Floor)(1), Bldg#2 (ground Floor (cctv Command Center)(1) & (9th Floor)(1), Bldg#3 (ground Floor-one Stop Shop/shared Space)(1), Ams Hall (ground Floor)(1), (3rd Floor)(1) & (2nd Floor)(1). Ÿsupply, Termination & Mounting Of Inter & Intra-building Backbone Cabling Peripherals To Proposed Location & Positions. Ÿcable Integrity Testing & Documentations. Lot Inter-building Backbone Cabling Peripherals: Ÿ6core, 50/125 Micron, Multimode, Om4, Outdoor-type, Non-armored Fiber Optic Cable Ÿ24port, 50/125 Micron, Multimode, Om4, Sc Fiber Optic Patch Panel (loaded) Ÿ12port, 50/125 Micron, Multimode, Om4, Sc Fiber Optic Patch Panel (loaded) Ÿcable Minder W/ Cover, 1ru Ÿsc 50/125 Micron, Multimode, Om4, Fiber Optic Pigtails, 1m Ÿduplex, 50/125 Micron, Multimode, Om4, Fiber Optic Patch Cord, 3m (lc-sc) Ÿconsumables: Spare Fiber Optic Pigtails, Buffer Tubing, Shrinkable Tube, Polishing Film (black, Green, & White), Adhesive, Syringe, Tissue Paper, Alcohol, Cross Connect Cables, Cable Tie, Velcro Etc. 1 4. Ups System And Power Supply Wiring Ÿsupply & Live Mounting Of 100at/100af, 3p, 3f Circuit Breaker Replacing The Existing 60at/100af, 3p, 3f Circuit Breaker At The Existing Power Distribution Panel Board & At The Ups Input Distribution Panel Board. These Include Modification Of The Existing Ups Input Panel Board & Replacement Of The Under Size Bus Bar. Ÿsupply & Layout Of 3-30mm2 & 1-8.0mm2 Thhn Wire From The Existing Power Distribution Panel Board To The Existing Ups Input Panel Board. Ÿsupply & Cable Pulling Of 2-ga#8/3c Royal Cord Utilizing The Existing Cable Ladder From The Modified Ups Input Panel Board To The Proposed Location & Positions Of 2 - New 5kva Ups At Data Center. Ÿend To End Termination Ÿinsulation Testing (megger) Lot Components: Ÿ100at/100af, 3p, 3f Circuit Breaker Ÿ40at/100af, 2p, 3f Circuit Breaker Ÿ30.0mm2 Thhn Wire (red) Ÿ30.0mm2 Thhn Wire (yellow) Ÿ30.0mm2 Thhn Wire (blue) Ÿ8.0mm2 Thhn Wire (green) Ÿga#8/3c Royal Cord Ÿterminal Lugs, 8-6s Ÿconsumables: Copper Phase Bus Bars, Cable Protection & Pathways, Metal Drill Bit, Blind Rivets, Hacksaw Blade, Masking Tape, Electrical Tape, Velcro, Cable Tie, Etc. 1 Services: Ÿlabor Charge /engineering /supervision Ÿmust Provide As-built Plans. Training Materials. Data Sheets, System Manuals, Configuration Documentation, And Equipment Inventory In Hard Copies And Soft Copies In Pdf Format As Appropriate. Ÿconduct Of Training User’s Training, And System Administration (knowledge Transfer) Ÿcable Integrity Testing And Report (test Result For Documentation Available In Hard & Soft Copies) Ÿsingle Line Diagram Ÿinsulation Test Report Ÿmust Provide Manuals And Technical Documents Of The Entire System Including Sample Photos (as-built Cad Drawings Indicating The Exact Location Of Terminals, Cable Identifier Number, Cabling Route, & Room Plans.) Ÿmobilization & Demobilization (personnel Comprehensive Insurances, Deliveries & Miscellaneous) 5. Active Components And Appliance Units Smart-ups Srt 5000va 4500w 230v Tower Type Includes: ● Smart-ups Srt 19" Rail Kit For Smart-ups Srt ● Start-up ● 5x8 Assembly And Power-up Service ● 3 Years Warranty In Ups & 2 Years In Battery ● Preventive Maintenance (one Visit Per Year) 2 Units Hi-capacity Aggregation (fully Managed, Layer 3 Switch With (28) 10g Sfp+ Ports And (4) 25g Sfp28 Ports) Features: Ÿ(1) 1.3” Lcm Color Touchscreen With Ar Switch Management Ÿ(28) 10g Sfp+ Ports Ÿ(4) 25g Sfp28 Ports Ÿ(1) Usp Rps Dc Input Ÿ760 Gbps Switching Capacity Ÿlayer 3 Switching Features 2 Units 48 Port Managed Switch With Poe (fully Managed Layer 3 Switch With (16) 2.5 Gbe Ports Including (8) Poe+ And (8) Poe++, And (32) Gbe Ports Including (24) Poe+ And (8) Poe++ And (4) 10g Sfp+ Ports) Features: Ÿ(16) 2.5 Gbe Ports Including (8) Poe+ And (8) Poe++ Ÿ(32) Gbe Ports Including (24) Poe+ And (8) Poe++ Ÿ(4) 10g Sfp+ Ports Ÿ(1) 1.3” Lcm Color Touchscreen Ÿdc Power Backup Ready Ÿ720w Total Poe Availability Ÿmanaged With Network Application 3 Units 24 Port Managed Switch With Poe (fully Managed Switch With (8) 2.5 Gbe Poe++ Ports, ((16) Gbe Ports Including (8) Poe+ And (8) Poe++, And (2) 10g Sfp+ Ports) Features: ● (8) 2.5 Gbe Poe++ Ports ● (16) Gbe Ports Including (8) Poe+ And (8) Poe++ ● (2) 10g Sfp+ Ports ● (1) 1.3” Lcm Color Touchscreen ● Dc Power Backup Ready ● 400w Total Poe Availability ● Managed With Network Application 15 Units 10g Multi-mode Optical Module (sfp+ Transceiver That Supports 10g Connections Up To 300 M Using Multi-mode Fiber With A Duplex Lc Upc Connector) 40 Units Factory Terminated Foc - Lc - Lc - 2 Meters 40 Units Centralized Access Points Manager (10g Cloud Gateway With 200+ Device / 2,000+ Client Support, 5 Gbps Ips Routing) Includes Full Application Suite For Device Management Ÿ5 Gbps Routing With Ids/ips Ÿ(1) 10g Sfp+*, (8) Gbe Rj45 Lan Ports Ÿ(1) 10g Sfp+*, (1) 2.5 Gbe Rj45 Wan Ports Ÿ(2) 3.5″ Hdd Bays With Raid Data Protection Ÿbuilt-in 128 Gb Ssd For Nvr Detection Recordings Ÿpower Backup Ready Ÿ1.3″ Touchscreen 2 Units Wi-fi 7 Access Point (ceiling-mounted Wifi 7 Ap With 6 Spatial Streams And 6 Ghz Support For Interference-free Wifi In Demanding, Large-scale Environments) Ÿwifi 7 With 6 Ghz Support Ÿ6 Spatial Streams Ÿ140 M² (1,500 Ft²) Coverage Ÿ300+ Connected Devices Ÿpowered Using Poe+ Ÿ2.5 Gbe Uplink 25 Units Server For Router: Form Factor Rack-mountable – 2u Server Hot-swap Bays Qty: 8 Processor / Chipset Cpu: Intel Xeon E5-2620v3 / 2.4 Ghz Or Higher Max Turbo Speed: 3.2 Ghz Or Higher Number Of Cores: 6-core Or Higher Processor Installed Qty: 1 Max Supported Qty: 2 Storage Raid Level: Raid 0, Raid 1, Raid 10 Hdd Installed: 1 X 3.5" 2tb 7.2k Sata Ram Memory Speed: 1866 Mhz Configuration Features: 1 X 16 Gb Memory Form Factor: Dimm 288-pin Slots Qty: 24 Empty Slots: 23 Networking Data Link Protocol: Ethernet, Fast Ethernet, Gigabit Ethernet Form Factor: Integrated Ethernet Ports: 4 X Gigabit Ethernet Ethernet Controller(s): Broadcom Bcm5719 Graphics Controller Form Factor: Integrated Graphics Processor: Matrox G200er2 Video Memory: 16 Mb Video Interfaces: Vga Power Type: Power Supply - Hot-plug Power Redundancy Scheme: 1+1 Installed Qty: 1 Max Supported Qty: 2 1 Scope Of Work Includes: Ÿconduct Site Survey & Gather Information Needed For Installation Planning. (before Bidding Process) Ÿprovide A Detailed Layout Or Diagram Based On The Equipment And Cable Runs Above That Will Be Approved By The It Division. Ÿperform Mobilization, Manpower Pooling And Procurement Of Local & Imported Materials In Preparation Of The Actual Implementation Of The Project. Ÿprovide The Necessary Tools And Equipment To Perform The Proposed Scope Of Works. Ÿproject Engineer Who Will Be Responsible For The Coordination And Management Of The Project Throughout Its Completion. He Will Be The Primary Interface In Coordinating Efforts And Tasks For The Delivery And Implementation Of The Contracted Services. Ÿprovide Project Management, Including Planning, Consultancy Services And Overall Supervision And Implementation. Ÿprovide Project Status Reports Advising The End-user On The Status Of The Activities. The Report Shall Consist Of The Following, As Appropriate: Weekly Reports And Updates Of The Project’s Progress, Checklist For Acceptance And Testing, Other Items Of Importance. Ÿwarranty Period For The Project Must Be One (1) Year On Parts, Labor, Materials, And Equipment. To Protect The National Library Of The Philippines (nlp) From Unreliable And Unproven Products And Services The Following Provisions Shall Be Required: 1.manufacturer Of The Proposed Brand Should Be Iso 9000 Certified Or Better. 2.the Proposed Manufacturer's Brand Should Have An Existing Technical Web Support System Where The Providers/ Bidders Can Log-in And Key-in Product Service Codes/item Codes For Faster Tracking Of Defective. 3.the Proposed Brand Should Have An International Brand Name, Which Means That The Brand Or Item Is Known And Marketed Globally And Have International Presence (physical Stores, Centers, Or Satellite Offices) In At Least 5 Countries. 4.the Brand Offered Should Be Sold And Marketed Continuously In The Philippines For The Last Ten (10) Years.

Details: Description Republic Of The Philippines City Of Bais -o0o- Bids And Awards Committee Invitation To Apply For Eligibility And To Bid The City Government Of Bais Invites Interested Bidders To Apply For Eligibility And To Bid For Various Improvement Of Operation Center, City Disaster Risk Reduction Management Office, Viz: Item Approved Budget For The Contract (abc) Pr No. 717-24 Php 1,065,020.00 1 15 Lgth Angle 40mm X 40mm X 5mm Thk X 6.0m Lgth 2 15 Lgth Angle 50mm X 50mm X 5mm Thk X 6.0m Lgth 3 20 Lgth Pipe, Gi, Nps 50mm Ø (2" Ø) X 6.0m Lgth S40 4 8 Lgth Steel Plate, Galvanize, 4' X 8' Gauge 14 5 50 Pcs Stainless Steel Bolt Nut Flat And Lock Washer Set, M10 X 70mm 6 50 Pcs Stainless Steel Bolt Nut Flat And Lock Washer Set, M6 X 60mm 7 50 Pcs Stainless Steel Bolt Nut Flat And Lock Washer Set, M6 X 20mm 8 50 Pcs Bolt Expansion Screw Shell Anchor Expansion Bolt, M8 X 70mm 9 10 Pcs Grinding Disc For Metal, Depressed Center, Aluminum-oxide, 100 Mm Ø 10 75 Kilo Welding Electrode, 1/8" Ø, E6013 11 8 Can Roofing Sealant, High Grade, 1/2l/can 12 8 Set Marine Epoxy, 1/2l/can 13 4 Roll Galvanized Cyclone Wire Ga8, 5 Feet X 6m (2 Inch Opening) 14 50 Meter Chain Hot Dipped Galvanized, Heavy Duty 8mm 15 10 Pcs Laminated Padlock 40mm/50mm Keyed Pad Lock Security Lock Solid Anti-theft, Made Up Of Multiple Layers Of Laminated Steel 16 20 Pcs Hacksaw Carbon Steel Blade Hd (12") 17 800 Pcs Chb 4" 18 100 Bags Portland Cement 19 30 Cu.m. Fine Aggregate (sand), 4.75mm Ø Max Size 20 150 Lgth Deformed Bar, 10mm Diameter X 6.0m Length 21 20 Kilo Gi Tie Wire, #16 22 200 Pcs Polished Tile, 600mm X 600mm Beige 23 10 Sheet Marine Plywood, 4' X 8', 1/2" Thk 24 10 Sheet Marine Plywood, 4' X 8', 1/4" Thk 25 20 Pair Soft Close Drawer Guide Heavy Duty, 18 Inch 26 6 Pcs Tile Cutter Wheel (dry) 100mm Ø 27 4 Pack Tile Grout (2 Kilo/pack) Beige 28 8 Gallon Paint, Flat Wall Enamel, Alkyd-based 29 10 Can Paint Thinner (3l/can) 30 10 Gallon Paint, Acrylic Semi-gloss, Water-based Paint (white Wash/tulle White) 31 10 Gallon Paint, Acrylic Semi-gloss, Water-based Paint (white) 32 8 Gallon Paint, Single Complonent Zinc Phosphate, Anti-corrosive Metal Primer 33 10 Gallon Paint, Odourless Qde, Water-based (suede/light Tan) 34 10 Gallon Paint, Quick Dry Enamel, Alkyd-based (red) 35 10 Gallon Paint, Quick Dry Enamel, Alkyd-based (orange) 36 10 Gallon Paint, Quick Dry Enamel, Alkyd-based (yellow) 37 10 Gallon Paint, Quick Dry Enamel, Alkyd-based (white) 38 8 Can Acrytex Primer 39 8 Can Acrytex Cast 40 8 Can Acrytex Reducer 41 10 Pcs Paint Brush, 2" 42 10 Pcs Paint Brush, 4" 43 8 Set Paint Roller 7-inch With Pan 44 100 Pcs Sand Paper Waterproof # 120 45 100 Pcs Sand Paper Waterproof # 160 46 75 Box Acoustic Foam Panels Self-adhesive Fireproof Sound Proof Treatment Wall, 300mm X 300mm X 8mm, Polyester Fiber, 0.9 Sound Absorption, (12 Pcs/box) 47 20 Pcs Rubber Cement, (360cc/bottle) 48 15 Pcs All Purpose Silicon Sealant (black) 49 5 Rolls Tw Copper Wire # 10 Awg (5.5 Mm²) 50 3 Rolls Tw Copper Wire # 12 Awg (3.5 Mm²) 51 4 Rolls Tw Copper Wire # 14 Awg (2.0 Mm²) 52 10 Pcs Utility Box, 2" X 4" 53 15 Pcs Junction Box W/ Cover & Screws 54 6 Rolls Flexible Hose Pvc, 1/2" X 100m 55 10 Pcs Circuit Breaker W/ Inclosure, 30a 56 10 Pcs Circuit Breaker W/ Inclosure, 20a 57 15 Pcs Led Exit Signage Emergency Acrylic 3 Watts Clear Aluminum Box, Overcharge Protection, Led Charging Indicaton, Automatic Switch Ni-cd 1.2v Battery And Charger, Pmma (polymethyl Methacrylate) Board 58 20 Pcs Led Parlamp E27, 12w-15w, 180 - 265v, Daylight 59 20 Pcs Led Bulb E27, 12w-15w, 180 - 265v, Daylight 60 10 Rolls Electrical Vinyl Tape, Flame Retardant, Professional Grade, 3/4" X 66' X 0.007", 600v @ 80° C Rating 61 4 Pcs Gate Valve, Brass, 1 1/2" Heavy Duty, 150psi 62 4 Pcs Gate Valve, Brass, 1" Heavy Duty, 150psi 63 40 Pcs. Stainless Heavyduty Flexible Hose, 16" Length (1/2" X 1/2") 64 10 Set Stainless (304) Shower Set; With Shower Head Set, With Hose And Holder And Two Way Faucet 65 20 Set Toilet Flush Set Fittings Dual Button Flush Valve Toilet Inlet Valve Toilet Fittings 66 20 Pcs. Stainless (304) One Way Angle Valve (1/2" X 1/2") 67 20 Pcs. Stainless (304) Two Way Angle Valve (1/2" X 1/2" X 1/2") 68 20 Pcs. Stainless (304) Bidet Toilet Sprayer And Hose 69 20 Pcs. Stainless (304) Urinal Flush Valve 70 10 Pcs. Floor Drain, Anti-clogging, 4" X 4" Stainless (304) 71 20 Lgth Ppr Pipe Pn20, 20mm Ø Nominal X 4.0m 72 10 Pcs. Ppr Elbow Pn20, 20mm Ø 73 6 Pcs. Ppr Elbow Pn20, 25mm Ø 74 10 Pcs. Ppr Coupling Pn20, 20mm Ø 75 20 Pcs. Ppr Coupling Pn20, 25mm Ø 76 20 Pcs Ppr Tee Pn20, 20mm Ø 77 10 Pcs Ppr Tee Pn20, 25mm Ø 78 8 Pcs. Ppr Coupling Reducer Pn20, 25mm X 20mm 79 30 Pcs. Ppr Threaded Female Elbow W/ Brass Pn20, 20mm 80 10 Pcs. Ppr Threaded Female Tee W/ Brass Pn20, 20mm 81 10 Pcs. Ppr Threaded Female Adapter Coupling W/ Brass Pn20, 20mm 82 10 Pcs. Ppr Threaded Male Adapter Coupling W/ Brass Pn20, 20mm 83 10 Pcs. Ppr Threaded Female Adapter Coupling W/ Brass Pn20, 25mm 84 10 Pcs. Ppr Threaded Male Adapter Coupling W/ Brass Pn20, 25mm 85 15 Pcs. Ppr Threaded Male Union Pn20, 25mm 86 15 Pcs. Ppr Threaded Male Union Pn20, 20mm 87 15 Pcs. Ppr Threaded Female Union Pn20, 25mm 88 15 Pcs. Ppr Threaded Female Union Pn20, 20mm 89 10 Pcs. Ppr Gate Valve Pn20, 25mm 90 10 Pcs. Ppr Gate Valve Pn20, 20mm 91 10 Lgth Sanitary Pipe Pvc, S-1000, 100mmø X 3.0 92 10 Lgth Sanitary Pipe Pvc, S-1000, 50mmø X 3.0 93 4 Pcs Sanitary Tee Pvc, S-1000, 100mmø 94 2 Pcs Sanitary Elbow Pvc, S-1000, 100mmø 95 4 Pcs Sanitary Wye Pvc, S-1000, 100mmø 96 5 Pcs Sanitary Coupling Pvc, S-1000, 100mmø 97 6 Pcs Sanitary Clean-out Pvc, S-1000, 100mmø 98 10 Pcs Sanitary Tee Pvc, S-1000, 50mmø 99 10 Pcs Sanitary Elbow Pvc, S-1000, 50mmø 100 10 Pcs Sanitary Coupling Pvc, S-1000, 50mmø 101 4 Can Pvc Pipe Cement, 400cc 102 20 Pcs Teflon Tape Pipe Thread Seal Tape, 1" X 10m The Approved Budget For The Contract Is To Be Taken From Improvement Of Operation Center (res. No. 485 Series 2024 Ordinance No. 36). Partial Bids Are Allowed, However, Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. In Order To Qualify, Bidders Should Conform To The Eligibility Criteria As Prescribed Under Sec. 23 And 25 Of The Revised Irr-a Of R.a. 9184. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary "pass/fail" Criteria As Specified In The Revised Irr-a Of R.a. 9184. As Such Non-submission Of Any Of The Required Documents Will Result In The Disqualification Of The Bidder. Due To Covid-19 Pandemic And Quarantine Regulations Of Every Provinces, Presence Of The Bidders Is Not Necessary. The Bids And Awards Committee (bac) Allows The Submission Of Bids Through Electronic Means And Submission Through Courier Services. The Following Documents Are Required For Submission: A. Eligibility Documents Including Technical Documents (1st Envelope): 1. Registration Certificate From Dti For Sole Proprietorship, Sec For Corporation Or Cda For Cooperative. 2. Valid And Current Mayor's Permit Where The Principal Place Of Business Of The Bidder Is Located. 3. Bir Registration Certificate With Taxpayer’s Identification Number. 4. Statement Of The Bidder Of All Its Ongoing And Completed Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid, Within The Relevant Period Where Applicable. The Statement Shall Be Supported With A Copy Of The Contracts/purchase Or Job Orders; And End-users Acceptance Or Delivery Receipt Duly Acknowledged. The Bidder Must Have Completed Within A Period Of Five (5) Years From The Date Of Submission And Receipt Of Bids, A Single Contract That Is Similar To The Contract To Be Bid Whose Value Must Be At Least Fifty (50%) Percent Of The Abc. However, In The Case Of Expendable Supplies, Said Single Contract Must Be At Least Twenty Five (25%) Percent Of The Abc, Or; The Bidder Should Have Completed At Least Two (2) Similar Contracts And The Aggregate Contract Amounts Should Be Equivalent To At Least The Percentage Of The Abc As Required Above. 5. Certificate Of Product Registration (cpr) From Food And Drug Administration (fda). (for Medicine Only)* 6. Certificate Of Good Manufacturing Practice From Fda. (for Medicine Only)* 7. Batch Release Certificate From Fda. (for Medicine Only)* 8. If The Supplier Is Not The Manufacturer, Certification From The Manufacturer That The Supplier Is An Authorized Distributor/dealer Of The Product(s)/item(s). (for Medicine Only)* 9. License To Operate (fda). (for Medicine Or Medical Supplies/equipment)* 10. Certificate Of Accreditation From Bureau Of Local Government Finance (blgf) (for Accountable Forms Only)* 11. Audited Financial Statements, Showing, Among Others, The Bidder's Total And Current Assets And Liabilities, Stamped "received" By The Bir Or Its Duly Accredited And Authorized Institutions, For The Preceding Calendar Year Which Should Not Be Earlier Than Two (2) Years From The Date Of Bid Submission. 12. The Bidder's Updated Computation For Its Net Financial Contracting Capacity (nfcc) Bearing The Date Thereof Must At Least Be Equal To The Abc To Be Bid, Or A Commitment From A Universal Or Commercial Bank To Extend A Credit Line In Favor Of The Bidder If Awarded The Contract To Be Bid (cl) Must At Least Be Equal To Ten Percent (10%) Of The Abc To Be Bid.* 13. Valid Joint Venture Agreement (jva), In Case Venture Is Already In Existence. 14. All Bids Must Be Accompanied By Bid Security In Any Or Combination Of The Acceptable Forms (below):* Form Of Bid Security Amount Of Bid Security A) Cash, Cashier's/manager's Check, Bank Draft/guarantee Confirmed By A Universal Or Commercial Bank. Two Percent (2%) B) Irrevocable Letter Of Credit Issued By A Universal Or Commercial Bank; Provided, However, That It Shall Be Confirmed Or Authenticated By A Commercial Or Universal Bank'; If Issued By A Foreign Bank. C) Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security. Five Percent (5%) D) Bid Securing Declaration Prospective Bidder May Also Submit Bid Securities In The Form Of Cashier's/manager's Check, Bank Draft/guarantee, Or Irrevocable Letter Of Credit From Other Banks Certified By The Bsp As Authorized To Issue Financial Statement. Bids And Bid Securities Shall Be Valid For A Reasonable Period As Determined By The Head Of The Procuring Entity, But In No Case Shall Exceed 120 Calendar Days From The Date Of The Opening Of Bids. 15. Production/delivery Schedule.* 16. Manpower Requirements* 17. After-sales Service/parts (if Applicable) 18. Sworn Statement By The Prospective Bidder Or Its Duly Authorized Representative As To The Following: A) It Is Not Blacklisted Or Barred From Bidding By The Gop Or Any Of Its Agencies; Office Corporations, Or Lgu's, Including Foreign Government/foreign Or International Financing Institutions Whose Blacklisting Rules Have Been Recognized By The Gppb; B) Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statement And Information Provided Therein Are True And Correct; C) It Is Authorizing The Head Of Procuring Entity Or The Duly Authorized Representative/s To Verify All Documents Submitted; D) Authority Of The Signatory; E) Affidavit Of Disclosure Of No Relationship; F) Certification On Bidder's Responsibilities; G) It Comply With Existing Labor Laws And Standards, In The Case Of Procurement Of Services; H) It Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Activity, And I) In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code. 19. Technical Specifications With Brochures, If Applicable.* 20. Certificate Of Philgeps Registration* 21. Tax Clearance* 22. Latest Income And Business Tax Returns (quarterly/monthly); (optional/required Upon Post-qualification)** Note:*required Documents To Be Submitted By Pre-qualified Suppliers/bidders Per Bac Resolution No. 74-g Dated July 30, 2019. **optional Submission During The Opening Of Bids But Mandatory Requirement Upon Post-qualification Per Bac Resolution No. 58-d Dated August 4, 2020. B. Financial Documents: (2nd Envelope) (a) Bid Prices In The Bill Of Quantities Failure To Submit The Above Requirements On Time Or A Finding Against The Veracity Of Such Shall Be Ground For The Forfeiture Of The Bid Security And Disqualify The Bidder For Award. Performance Security And Warranty Shall Be Governed By The Provisions Of Secs. 39 And 62, Respectively, Of The Revised Irr-a Of R.a. 9184. Bid Documents Can Be Obtained Upon Payment Of Non-refundable Fee Equivalent To The Total Amount Of The Abc Of The Items In Which Interested Bidders Intend To Bid, In Accordance With The Guidelines On The Sale Of Bidding Documents, Appendix 25 Of The Revised Irr Of R.a. 9184: Approved Budget For The Contract (abc) Maximum Cost Of Bidding Documents (in Philippine Peso) 500,000 And Below 500.00 More Than 500,000 Up To 1 Million 1,000.00 More Than 1 Million Up To 5 Million 5,000.00 More Than 5 Million Up To 10 Million 10,000.00 More Than 10 Million Up To 50 Million 25,000.00 More Than 50 Million Up To 500 Million 50,000.00 More Than 500 Million 75,000.00 Bid Documents Can Be Obtained At The Bac Secretariat, Office Of The Bids And Awards Committee, This City, Tel. No. (035) 402-8047, Anytime During Office Hours; And Can Also Be Inquired For Further Information Or Particulars. All Other Particulars Relative To The Procurement Process Shall Be Governed By The Revised Implementing Rules And Regulations Of R.a. 9184 Otherwise Known As The Government Procurement Reform Act. Pre-bid Conference Will Be On January 14, 2025, 1:30 P.m. At The City Budget Office, 2nd Floor, City Hall Annex Building, This City. Eligibility Requirements Including Technical Documents And Financial Documents Shall Be Submitted Together Each In Separate Sealed Envelopes Duly Marked As Such On January 28, 2025 At The City Budget Office, 2nd Floor, City Hall Annex Building, This City, At 1:30 Pm At Which Date, Place, And Time Said Envelopes Shall Be Opened In The Presence Of The Members Of The Bac, The Attending Bidders, The Observers, Or Their Duly Authorized Representative. Late And Unsealed Bids Shall Not Be Accepted. The City Government Of Bais Reserves The Right To Accept Or Reject Any Bid, And To Annul The Bidding Process And Reject All Bids At Anytime Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. (sgd.) Atty. Romela Mae L. Napao City Administrator Chair, Bids And Awards Committee