Fabrication Tenders

Details: End Wall Assembly Not:-"mig Welding (131) Is To Be Read As Tig Welding (141) ", As Per Drawing: Lg15195alt'd' & Mdts 21332 Ver 0 Alongwith Shutter Complete /lock Asse Mbly To Drg.no. 2 10113.0.76.300.012 Alt'-r1' & Lw44318 Alt'c'., Packing Instruction: 1. The Sup Plier Shall Pack The End Wall In A Suitably Designed Returnable Fixture In Such A Way Th At End Wall Shall Not Get Scratched, Damaged, Twisted During Transportation, Storag E And Lifting And To Avoid Scratches On Outer Surface. It Should Be Wrapped With Envir Oment Friendly Material And It Should Have Standard Clamping /fastening Mechanism So That It Can Be Opened Easily. It Should Have Firm's Identification Mark. 2. First Returanable Fixture Along With End Wall Be Retained By Rcf & This Fixture Shall Be Exch Anged In The Second Lot Supply And So On. At The End Of The Contact, The Firm Shall Col Lect The Remaining Returnable Packing Fixture From Rcf. 3. The Packing Fixture/frame To Be Fabricated Having Sufficient Strenght To Bear Approximate 2 Tonne Load In Static & Moving Condition Of Two Coach Sets Of End Wall. 4. The Fixture /frame/pallet Should Be Designed So That The Packed End Wall Preferably Remain In Vertical Position To Minimize Surface Area. 5. It Should Also Be Suitable For Storage Of End Wallunder Open Sky. [ Wa Rranty Period: 30 Months After The Date Of Delivery ] ]

Details: End Wall Assembly For Lhb Gs & Scn (amrit Bharat ) Coaches Note:-(1)in Dra Wings "mig Welding (131) Is To Be Read As Tig Welding (141)" As Per Design Letter No. Md4 6231 Dated 16.03.2024. (2)firm Shall Collect All Latest/final Drawings Before Manufactu Ring. There May Be Minor Modification In Design., As Per Drawing: 75415001 Alt. 'br1', Packing Instruction: 1. The Supplier Shall Pack The End Wall In A Suitably Designed Returnable Fixt Ure In Such A Way That End Wall Shall Not Get Scratched, Damaged, Twisted During Tra Nsportation, Storage And Lifting And To Avoid Scratches On Outer Surface. It Should B E Seperated By Suitable Environment Friendly Blocks To Avaoid Rubbing Of Two Endwall Surfaces . It Should Have Standard Clamping /fastening Mechanism So That It Can Be Ope Ned Easily. It Should Have Firm's Identification Mark. 2. First Returanable Fixture Along With End Wall Be Retained By Rcf & This Fixture Shall Be Exchanged In The Second Lot Su Pply And So On. At The End Of The Contact, The Firm Shall Collect The Remaining Returnable Packing Fixture From Rcf. 3. The Packing Fixture/frame To Be Fabricated Havi Ng Sufficient Strenght To Bear Approximate 2 Tonne Load In Static & Moving Condition O F Two Coach Sets Of End Wall. 4. The Fixture /frame/pallet Should Be Designed So That T He Packed End Wall Preferably Remain In Vertical Position To Minimize Surface Area. 5. It Should Also Be Suitable For Storage Of End Wallunder Open Sky. [ Warranty Period: 30 M Onths After The Date Of Delivery ] ]

Details: Various Equipment Lying At Cummins Group-kothrud & Phaltan:old Used Various Assorted Equipment’s, Machineries Consisting Of Saj Dynamometers, Test Cell Control System, Test Beds, Engine Test Cart, Valves, Acoustic Door, Cardon Shaft, Engine Cranker, Control System, Fixtures, Cell Blower, Festo Make Exhaust Flow Control Valve, Providing Pvc Carpet In Qsk-60 Test, Instrumentation Panel, Cng Pipeline, Flameproof Lamp, Cng Testing Facility, Heat Treatment Equipment’s Consisting Of Automatic Burner Control Sets, Sealed Quench Furnaces, Exhaust System, Heat Exchanger, Tube Heater Assembly, Roller Track Assembly, Blowers, Nitrogen Gas Generator, Gas Generator Furnace, Valco Polish Belt, Ms Plate Structure Strengthening Work For Heat Treatment Floor, Cooling Tower With Tank, Vacuum Cleaner, Hand Pallet Truck, Piping, Brick Works, Praga Universal Tool & Cutter Grinding Model-411, Walters Universal Tool Grinding Machine, Manipulator For Zoller Machine Im1-315338, Marking Machine, Flanges, Tables, Storage Drawers, Trimos Vert Universal Measuring Inst. Model Tva1000 (cnc Hmt), Tempo Thermostat Oven, Torque Wrench, Mmt Granite Surface Plate, Gas Cut Eot Cranes 10 Ton Cap. 2 Nos, Electrode Oven, Tugger 3t, Hand Pallet Trucks, Manual Drum Stacker, Weighing Machines, Welding Machines, Leak Test Machine, Drill Gun, Mccb Box, Mini Bench Centre Lathe, Welding Booth, Cylinder Gas Trolley, Racks, Air Receiver, Ms Fabricated & Structural Material Belongs To Tcp-2 ^ Tcp-3 Phaltan-10 Mt, Old Used Various Assorted Instruments Condition Of Flashlight Torch Kit, Digital Hand Tachometer, Steel Scale, Gauges, Gloss Meter, Clamp Meter, Vernier Caliper Etc.

Details: CATEGORY: BOF N16-7-0 HOSE CLAMPS JUBILEE , BOF N5-9-14X43 PLATE LOCKING METRIC SIZES , BOF B6S-6X8 N2-18 SCREW HEXAGONAL , BOF N9-14-90-120-13 SEALING RING ROTATING SHAFTS WITH EXTERNAL CAPS , BOF 6111023-2 NUT , BOF 61C1908 NUT FABRICATED , BOF N5-14-MB6 WASHER SHAKE PROOF EXTERNAL TYPE MB METRIC SIZES N5-14-MB6 , BOF 6125372-2 CHAIN , BOF 6107526 , BOF 6186250 CLIP DOUBLE BRAKE HOSE FRONT , BOF N9-14-15- 30-10 RING SEALING , BOF 6146252 WINDOW , BOF 6112185 PAWL , BOF 6164944 PIN , BOF 6002333 HANDLE CLAMPING SEAT PILLER , BOF 5054251 BAR ANCHOR CHAIN , BOF 6141499 BRAKE INSTALLATION SOCKET WWELDING , BOF 6108646 SHAFT , BOF 6148329 SPRING , BOF 6186251 CLIP DOUBLE BRAKE HOSE REAR , BOF 6108624 SPRING , BOF 6126916 ROD , BOF N15-28-13 T-COUPLING , BOF 6135096 5360-040856 SPRING RAMMER , BOF 5049698-2 DOG , BOF 6343514 SPRING , BOF 6103127 SPRING , BOF 6135336 SPRING , BOF 5048790 SPAINER , BOF 6116587 COVER , BOF 6110070 SPRING PAWL , BOF 6115945 SPACER , BOF 6115425 5360-007169 SPRING STRIKER INNER , BOF N5-14-MB5 WASHER SHAKE PROOF , BOF 6116629 WASHER HAND PUMP , BOF 6096697 PLATE RIGHT , BOF 6110070-2 SPRING PAWL , BOF 6131947 NUT , BOF 6096698 PLATE LEFT , BOF 6115659 CLIP , BOF 6112141 SPRING RAMMER STOP PAWL PLUNGER , BOF 6101594 CLIP , BOF 6181673 SIGN , BOF 6108621 SHIM , BOF 6108161 KNOB , BOF 6168234 PLUNGER , BOF 6046763 HANDLE , BOF 6118824 BOLT SECURING , BOF 6038322 PLUG , BOF N5-22-94 CLIP SPRING N5-22-94

Details: 1)Imp Estimate for newly proposed 25 KVA DT ( kandarvilagam V ) in vaniagudi # due to improve the tail end voltage in vaniagudi area and to reduce the kandarvilagam ss1 250 KVA DT load and LT length under chemponvilai section. 2)Imp Estimate for newly proposed 25 KVA DT ( kandarvilagam V1 ) in vaniagudi # due to improve the tail end voltage in kandarvilagam area and to reduce the kandarvilagam ss1 250 KVA DT load and LT length under chemponvilai section. 3)Imp Estimate for newly proposed 25 KVA DT ( kuttithoppu ss ) in vaniagudi # due to improve the tail end voltage in kuttithoppu area and to reduce the irumpuli ss V1 100 KVA DT load and LT length under chemponvilai section. 4) Imp Estimate for newly proposed 25 KVA DT ( saralvilai ss ) in vaniagudi # due to improve the tail end voltage in saralvilai area and to reduce the paansilai ss 63 KVA DT load and LT length under chemponvilai section. 5)Imp Estimate for newly proposed 1 no 63 KVA DT in pandaravilai charode feeder due to improving tail end voltage in pandaravilai area reduce the overload existing pandaravilai ss1 /100 KVA under Eraniel section. 6)Imp Estimate for providing 1 no 63 KVA DT in the existing pillaiyarkovil ss V1 /100 KVA to avoid LT low voltage at location of periyavilai ss 111 under manavalakurichy section. 7)Imp Estimate for providing 1 no 11 KV AB switch into centre rotating AB switch in 11 KV Eraniel feeder at vattam under Eraniel section. 8)Imp Estimate for 12 nos 8m deteriorated pole into 9m psc pole in 11 KV vellichandai feeder and 11 KV kadiapattnam feeder location at Asarimar street under manavalakurichy section. 9)Imp Estimate for provision of 1 no AB switch and strengthening of conductor in 11 KV vellichandai feeder to provide backfeeding arrangement between 11 KV vellichandai feeder and 11 KV kadiapattnam feeder at Asarimar street under manavalakurichy section. 10)Imp Estimate for deteriorated 1 no 11 KV cheramangalam AB switch into 11 KVcentre rotating AB switch in 11 KV mondaikadu feeder under manavalakurichy section. 11)Imp Estimate for 16 nos 8m RCC poles into 9m PSC poles in 11 KV colachel feeder in various location under colachel section. 12)Imp Estimate for 1 no 63 KVA DT an improving tail end voltage at kandanvilai RC church under Eraniel section. 13)Imp Estimate for 1 no 63 KVA DT in the existing thingalchanthai ss 250 KVA to improving tail end voltage at sunaparai under Eraniel section. 14)Imp Estimate for replacement of corrded 3 nos teak wood poles into 9m psc poles and 9 nos 9m insertion psc poles insertion in various locations under vellichandai section. 15)Imp Estimate for replacement of corrded 3 nos 9m psc poles and 9 nos corrded 8m poles and 6 nos 8m psc poles insertion in various locations under vellichandai section. 16)Imp Estimate for newly proposed 25 KVA DT asad nager ss 111 in asad nager area to reduce the asad nager ss 11 100 KVA DTs load and LT length under colachel section. 17)Imp Estimate for 1 no 63 KVA DT in the existing chekkala street ss 250 KVA overloading voltage at location chekkala street area under Eraniel section. 18)Imp Estimate for strengthening of aged conductor 7/3.35 into 7/4.09 in 11 KV colachel feeder from sasthankarai ss 1V 100 KVA to poolankarai ss 100 KVA under colachel section. 19)Imp Estimate for newly proposed 11 KV centre rotating AB switch in 11 KV thickanamcode feeder for backfeeding arrangement under chemponvilai section. 20)Imp Estimate for deteriorated 1 no 11 KV kootumangalam AB s into centre rotating AB switch in 11 KV IRE feeder under manavalakurichy section. 21)Imp Estimate for deteriorated 1 no 11 KV padarnilam AB s into centre rotating AB switch in 11 KV kadiapattinam feeder under manavalakurichy section. 22)Imp Estimate for 1 no 9m PSC pole into fabricated RSJ pole in loc F11/9 Alwarcoil ss1 under Eraniel section. 23)Imp Estimate for 1 no 9m PSC pole into fabricated RSJ pole in loc F11/11 mylode ss under Eraniel section. 24)Imp Estimate for 1 no 9m PSC pole into 40’ fabricated RSJ pole in loc F1/9 sundavilai ss1 under Eraniel section. 25)Imp Estimate for strengthening of existing HT conductor ACSR 7/3.35 into ACSR 7/4.09 at kootumangalam AB s to EB office ABs in IRE feeder under manavalakurichy section. 26)Imp Estimate for newly proposed linkline of 11 KV lakshmipuram feeder and linkline between CPVI ss VCB AB switch in 11 KV colachel feeder under chemponvilai section. 27)Imp Estimate for newly proposed 2 nos 25 KVA DT mathavilai ss 1V and V in mathavilai area to avoid over load mathavilai ss 100 KVA DT load and LT length under manavalakurichy section. 28)Imp Estimate for replacement of deteriorated structure in kurumpani ss 111 /100 KVA in palapallam feeder under chemponvilai section. 29)Imp Estimate for the conductor strengthening of Thirunainarkurichy # from ammandivilai junction to mavilai ss 1 /63 KVA for improving tail end voltage reduce the load of vellichandai # under vellichandai section. 30)Imp Estimate for replacement of deteriorated structure in muttom ss V 100 KVA in muttom light house # under vellichandai section. 31)Imp Estimate for strengthening of existing 7/3.35 into 7/4.09 in location of kadiapattinam # under manavalakurichy section. 32)Imp Estimate for newly proposed 1 no 63KVA DT mathicode 11 in palapallam feeder under chemponvilai section. 33)Imp Estimate for the conductor strengthening of existing HT aged conductor ACSR 7/2.59 into ACSR 7/4.09 at west neyoor junction to periyapalli ss 1 /100 KVA in bethelpuram # under chemponvilai section. 34)Imp Estimate for replacement of deteriorated structure in pidagai ss 1 100 KVA in palapallam # under chemponvilai section. 35)Imp Estimate for newly proposed 1 no 63KVA DT pothayanvilai ss area in palapallam feeder under chemponvilai section.

Details: CATEGORY: Indoor Minidome Color Camera with IR, Power supply and mounting accessories , Indoor dome 3 Image sensor Multi pro multi-directional Color camera with IR, Power supply and mounting accessories , Outdoor dome 3 Image sensor Multi pro multi-directional Color camera with IR, Power supply and mounting accessories , Outdoor color camera with IR LED , Tab 5G , Network Video Recorder with VMS and 15 camera and 5 client viewer licence ad mounting accessories in network rack , Networking - 24 port L-2 Managed switch with mounting accessories in network rack , Networking - Network Rack , Networking - 1G Industrial grade media converter , Networking - SFP module single mode, 10G , Cabling and Laying - Indoor Cat 6 Cabling, connectors and accessories with PVC casing , Cabling and Laying - Outdoor Cat6 armoured cabling, connectors and accessories with HDPE casing , Cabling and Laying - Outdoor Armoured 4 core single mode OFC and accessories with HDPE casing , Cabling and Laying - Indoor 1.5 sqmm copper Flexible power cabling with connectors and accessories like MCB etc , Cabling and Laying - Outdoor 1.5 sqmm copper Armoured power cabling, connectors and accessories with HDPE casing , Cabling and Laying - 25mm MS Metallic pipe with proper gauge to withstand vehicle load for conduit if cables crossing the road , Civil works - Soft soil digging 1 feet depth, trenching and refilling , Civil works - Road or Concrete digging 1feet depth, trenching and refilling with concrete , IP66 Dust and water proof Junction Box at the bottom of Pole for power supply unit, FOC termination and FO component and exhaust fan for cooling and extension box with surge protector , Metallic Pole - 20 feet high. Along with concrete base of 1 feet and lightening arrestor , Fabricated MS steel pipe customized for mounting camera on wall , 100 Watt LED External lighting for illumination of camera view area at each pole , Proper earthing and lightening arrestor for cameras as per OEM , Relocation of existing camera , Installation and commissioning of cameras with VMS

Details: Constr Of Multipurpose Indoor Hall With Pcc Badminton Court size 57 Into 30 Into 30 Feet And Gym Size 30 Into 30 Into 15 feet Excavation Of Ground For Foundation 900mm X 600mm and 1m X 1m In Columns , Pcc 1 Ratio 4 In Foundation For brick Work With The Thickness Of 100 Mm , Pcc In Floor With bedding Of 3 Inch Rubble Stone And Pcc Work With 1 Ratio 1 point 5 Ratio 3 Mix M 20 Material Of 100 Mm Thickness , brick Work With 1 Ratio 6 Mix Material With Sub B Class Bricks work In Walls On 230mm Thick Wall , Plaster On Walls With 1 ratio 4 Mix Material Inside And Outside Maintaining thickness Of 15 Mm , Steel Bars In Column And Beam , Rcc work In Column And Beam With 1 Ratio 1 Point 5 Ratio 3 Mix m20 Material , Pillar Column Of 6 Inch Ms Round Pipe 4mm to 5mm Wall Thick With Base Plate On Bothside Of 16 Inch x16 Inchx10mm Thickness Height Of Pillar 22 Feet Include J bolts For Grouting Of Pillars 1mtr Long , Trusses Made Of 2 into 4 Inch Ms Pipe Of Wall Thickness 3 To 4 Mm Thick including Cutting Jointing Complete , Purlin Of 2 X 4 Inch rectangular Ms Pipe Of Thickness 3 To 4mm , Rafters Of 3x3 inch Square Pipe Of Thickness 3 To 4mm , Ms Pipe Support for Side Covering With 2x1 Point 5 Inch Pipe Of Thickness 3 To 4mm , Cross Bracing For Structure Of 2x4 Inch Ms Pipe Of thickness 3mm To 4mm , Aluminium Windows 6x6 Feet 06 nos And Doors 02 Nos Including All Accessories , Roof And side Covering With Colour Coated Aluminium Galvanized sheet 0. Point 45 To 0 Point 5 Mm Thick Including Claddings of 6 Into 6 Inch Size At All Corners Of The Shed , Electrification work Including Fans 8 Nos And Tube Lights 12 Nos And Switch sockets 20 Points , Ventilation Exhaust Fan 06 Industrial type Fixed On Top Of The Roof Incl All Attachments , Painting work Including Enamel Paint On Fabricated Work And whitewash On Cement Wall Inside And Outside , Badminton court Rubberized Mat Surface , Treadmill Commercial , dumbbells 2 And 4 And 5 And 10 Kg Weight , Rubberized weight Including Rods , Cross Trainer Commercial , Incline and Decline Bench , Exercise Bike Commercial , Gym Mat

Details: CATEGORY: Supply of 3.0 or 3.5 TR single circuit air cooled ductable split AC unit , Supply of 1.5 TR single circuit air cooled ductable split AC unit , Supply of 2.0 TR single circuit Standalone Floor standing Tower type air cooled split AC unit , Supply of 3 Star rating 1.5 TR Inverter type wall mounting type split air conditioner , Supply of 5 Star rating 1.5 TR Inverter type wall mounting type split air conditioner , ITC of 3 or 3.5TR ductable split AC unit , ITC of 2 TR Tower split AC unit , ITC of 1.5 TR Capacity Split A.C unit , Providing Fabricating and fixing M S Stand a. 40 X 40 X 5 mm MS angle iron , b. 40 X 5 mm MS flat strip , Supplying and fixing of Powder Coated prefabricated MS frame stand , SITC of of following nominal sizes of hard drawn copper refrigerant piping a. 6.4 mm dia OD Soft drawn with tube thickness 1.2 mm with 19 mm thick insulation , b. 9.5 mm dia OD Hard drawn with tube thickness 1.2 mm with 19 mm thick insulation , c. 12.7 mm dia. OD Hard drawn with tube thickness 1.2 mm with 19 mm thick insulation , d. 15.56 mm dia OD Soft drawn with tube thickness 1.2 mm with 19 mm thick insulation , e. 22.2 mm dia OD Hard drawn with tube thickness 1.2 mm with 19 mm thick insulation , Providing and fixing following size dia FRLS, HMS uPVC pipe a. 40mm dia , b. 25 mm dia. , Supply and fixing of control cum transmission wiring a. 5c X 4 sq.mm PVC insulated copper conductor cable , b. 4c X 1.5 sq.mm PVC insulated copper conductor cable , SF of PVC insulated PVC sheathed copper conductor armoured cable of 4c X 6 Sq.mm , Supplying and fixing FP sheet steel enclosure on surface or recess along with 25 or 32 A 415 V C curve FP MCB , Supplying and fixing DP sheet steel enclosure on surface or recess along with 25 or 32 A 230 V C curve DP MCB , SITC of GSS sheet metal rectangular ducting a. Thickness 0.63mm sheet , b. Thickness 0.8mm sheet , Providing and Fixing supply air grills of Powder coated Aluminum , Supplying and installing following size of Galvanised Iron cable tray a. 100 mm width X 50 mm depth X 1.6 mm thickness , b. 150 mm width X 50 mm depth X 1.6 mm thickness

Details: CATEGORY: Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112 1989 Make Birla Gold or Ambuja or Ultratech or ACC or JKJ Dalmia , Stone boulder 9inch to 12inch , Coarse Aggregate 40 to 63mm , Coarse sand free from vegetation , Coarse Aggregate 20mm graded . , Coarse Aggregate 40mm graded , Mild Steel Bars of size 6 to 8 mm dia Conform to IS 432 Part 1 1982 TMT Bar Make TATA or SAIL or JSW , Water proofing compund conforming to IS 2645 2003 Make Pidilite or Dr Fixit or Fevicol , PBS Roll 20m Long Width of 0 point 9Mtr ISI Marked with Min weight of 34 Kgs per Roll , GI binding wire TATA or SAIL or JSW , Cement base paint Scowcem Make Berger or Asian or Nerolac , Slack Lime , Painting brush 4inch ISI Marked , HDPE Sand bags khaki colour of size 30inchx15inch inside laminated interlocking stiched weight of the each bag as per TS , Anti corrosive red oxide zinc chromate primer confirming to IS 5 2004 Make Berger or Asian or Nerolac , Synthetic Paint enamelled OG confirming to IS 5 2004 Make Berger or Asian or Nerolac , Thinner Make Nerolac or Berger or Asian , SRT 2440 x 613 x 180 2 mm thick MS Sheet Hot Rolled Steel with nuts and bolts incl One coat of Red Oxide Make TATA or SAIL or JSW , SRT 1840 x 613 x 180 2 mm thick MS Sheet Hot Rolled Steel with nuts bolts incl One coat of Red Oxide Make TATA or SAIL or JSW , ISMB hot rolled MS 200 x 100 4M Make TATA or SAIL or JSW , Prefab mild steel door of size 750x1800mm double shutter outer frame made out of ISA 40x40x6mm as per TS , Mild Steel Bars of size 6 to 10 mm and above dia conforming to IS 432 Part I 1982 Make TATA or SAIL or JSW , Loop Holes 780 x 300 mm Make TATA or SAIL or JSW , Loop Holes 1000 x 300 mm Make TATA or SAIL or JSW , Loop Holes 1250 x 350 mm Make TATA or SAIL or JSW , Ventilator steel 600x450mm will be fabricated using ISA 35x35x6mm for outer frame and ISA 30x30x3mm as per TS , Wooden plank for shuttering II class wood of size 3 point 0 x0 point 3 x0 point 026 m , Wooden Scantling various size , Nails various sizes , Air terminatoin single pointed aluminium rod 12mm dia and 300mm long , Testing point terminal block made of gun metal phosphorus bronze size 75x75x25mm drilled and screwed as per TS , Aluminium strips 25x3mm , Galvanised iron strip 32x6mm , Funnel fitted with 20mm dia GI Pipe 1 point 5m long Make Jindal or Tata or Kalinga , Earthing Plate 600x600x6mm GI steel suitable for GI strip fittings drilled with two nos holes for 6 mm dia near one side , CI earth pit cover of size 300x300x6mm with angle of size 20x20x3mm thick with MS frame , Insulating PVC block 75x75x30 mm with insulating clamp nut bolt Make Presto or Polycab or Finolex , Charcoal , Salt

Details: CATEGORY: Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112 1989 Make Birla Gold or Ambuja or Ultratech or ACC or JKJ Dalmia , Stone boulder 9inch to 12inch , Coarse Aggregate 40 to 63mm , Coarse sand free from vegetation , Coarse Aggregate 20mm graded . , Coarse Aggregate 40mm graded , Mild Steel Bars of size 6 to 8 mm dia Conform to IS 432 Part 1 1982 TMT Bar Make TATA or SAIL or JSW , Water proofing compund conforming to IS 2645 2003 Make Pidilite or Dr Fixit or Fevicol , PBS Roll 20m Long Width of 0 point 9Mtr ISI Marked with Min weight of 34 Kgs per Roll , GI binding wire TATA or SAIL or JSW , Cement base paint Scowcem Make Berger or Asian or Nerolac , Slack Lime , Painting brush 4inch ISI Marked , HDPE Sand bags khaki colour of size 30inchx15inch inside laminated interlocking stiched weight of the each bag as per TS , Anti corrosive red oxide zinc chromate primer confirming to IS 5 2004 Make Berger or Asian or Nerolac , Synthetic Paint enamelled OG confirming to IS 5 2004 Make Berger or Asian or Nerolac , Thinner Make Nerolac or Berger or Asian , SRT 2440 x 613 x 180 2 mm thick MS Sheet Hot Rolled Steel with nuts and bolts incl One coat of Red Oxide Make TATA or SAIL or JSW , SRT 1840 x 613 x 180 2 mm thick MS Sheet Hot Rolled Steel with nuts bolts incl One coat of Red Oxide Make TATA or SAIL or JSW , ISMB hot rolled MS 200 x 100 4M Make TATA or SAIL or JSW , Prefab mild steel door of size 750x1800mm double shutter outer frame made out of ISA 40x40x6mm as per TS , Mild Steel Bars of size 6 to 10 mm and above dia conforming to IS 432 Part I 1982 Make TATA or SAIL or JSW , Loop Holes 780 x 300 mm Make TATA or SAIL or JSW , Loop Holes 1000 x 300 mm Make TATA or SAIL or JSW , Loop Holes 1250 x 350 mm Make TATA or SAIL or JSW , Ventilator steel 600x450mm will be fabricated using ISA 35x35x6mm for outer frame and ISA 30x30x3mm as per TS , Wooden plank for shuttering II class wood of size 3 point 0 x0 point 3 x0 point 026 m , Wooden Scantling various size , Nails various sizes , Air terminatoin single pointed aluminium rod 12mm dia and 300mm long , Testing point terminal block made of gun metal phosphorus bronze size 75x75x25mm drilled and screwed as per TS , Aluminium strips 25x3mm , Galvanised iron strip 32x6mm , Funnel fitted with 20mm dia GI Pipe 1 point 5m long Make Jindal or Tata or Kalinga , Earthing Plate 600x600x6mm GI steel suitable for GI strip fittings drilled with two nos holes for 6 mm dia near one side , CI earth pit cover of size 300x300x6mm with angle of size 20x20x3mm thick with MS frame , Insulating PVC block 75x75x30 mm with insulating clamp nut bolt Make Presto or Polycab or Finolex , Charcoal , Salt