Fabrication Tenders

Details: Description:- Manufacturing And Supply Of Alumino Thermic Welding Portions Of 52kg/60 Kg/60ei- r260 As Approved By Rdso For Welding Of Rails 52kg/60kg/60ei-r260 Kg For 25mm Gap By The process Of At Welding Along With Complete Accessories Confirming To The Specification Laid Down In indian Railway Standard Specification No.irst-19-2020 Up To Date Correction Slips With Single Shot cruciblefittedwith Automatic Tapping Thimble, 3 Pieces Pre Fabricated Mould (zircon Washed) manually Pressed Using Compressed Air Petrol/lpg Pre Heating For Execution Of Welding Of Rail Joint as Directed By The Engineer In Charge At Site. Note: 1. The Accessories Along With Welding Portion shall Be Supplied As Per Annexure-i Of The Irussor - 2021. 2. Rate Is Inclusive Of Transportation Of above To Sse/p.way Stores. For 60kg 90 Uts Rails

Details: Description:- Reinforced Cement Concrete Of Grade M-40/45 With Weigh Batching Plant In Prestressed concreteslab/girdercastinsituasperrdso'sdrawingwithhardcoarsecrushedaggregateof maximum Size 20mm Of Approved Quality And Grading Including Fabricating Errecting And Dismantling offormwork,shutteringmouldsetc.includingprovidingsheathingduets,scaffolding(complete arrangement Of Bottom Support From River Bed Is To Be Done By The Contracter At His Own Cost) With weigh Batching, Mechanical Mixing And Placing In Position Of Concrete. Vibrating, Tamping, Curing And finishing Etc. Complete With Contractor's Materials Including Plasticized But Excluding Supply Of Cement and Steel With All Necessary Construction Plants And Machinery, Labour Etc. Complete As Per Drawing, specification And As Directed By The Engineer, Plastcizer As Per Specification Shall Be Arrangerd By The contractor At His Own Cost. Reinforcement Cement And Prestressing Steel Work Shall Be Paid Separately. (approved Source Of Coarse Agreegate Is Dalla Range, Rewa Range & Kabarai Range. Any Modification In above Source Will Be Only After Prior Approval Of Engineer-in-charge.).

Details: Description:- Manufacturing And Supply Of Alumino Thermic Welding Portions Of 52kg/60kg/60e1-r260 As Approved By Rdso for Welding Of Rails 52kg/60kg/60e1-r260 Kg For 25mm Gap By The Process Of At Welding Along With Complete Accessories confirming To The Specification Laid Down In Indian Railway Standard Specification No.irst-19-2020 Up To Date Correction Slips with Single Shot Crucible Fitted With Automatic Tapping Thimble, 3 Pieces Pre Fabricated Mould (zircon Washed) Manually pressed Using Compressed Air Petrol/lpg Pre Heating For Execution Of Welding Of Rail Joint As Directed By The Engineer In Charge at Site. Note: 1. The Accessories Along With Welding Portion Shall Be Supplied As Per Annexure-i Of The Irussor-2021. 2. Rate Is inclusive Of Transportation Of Above To Sse/p.way Stores. For 60kg 90 Uts Rails

Details: Description:- "manufacturing And Supply Of Alumino Thermic Welding Portions Of 52kg/60 Kg/60ei-r260 As Approved By Rdso for Welding Of Rails 52kg/60kg/60ei-r260 Kg For 25mm Gap By The Process Of At Welding Along With Complete Accessories confirming To The Specification Laid Down In Indian Railway Standard Specification No.irst-19-2020 Up To Date Correction Slips with Single Shot Crucible Fitted With Automatic Tapping Thimble, 3 Pieces Pre Fabricated Mould (zircon Washed) Manually pressed Using Compressed Air Petrol/lpg Pre Heating For Execution Of Welding Of Rail Joint As Directed By The Engineer In Charge at Site. Note: 1. The Accessories Along With Welding Portion Shall Be Supplied As Per Annexure-i Of The Irussor - 2021. 2. Rate is Inclusive Of Transportation Of Above To Sse/p.way Stores. " For 60kg 90 Uts Rails

Details: Description:- Manufacturing And Supply Of Alumino Thermic Welding Portions Of 52kg/60 Kg/60ei- r260 As Approved By Rdso For Welding Of Rails 52kg/60kg/60ei-r260 Kg For 25mm Gap By The Process of At Welding Along With Complete Accessories Confirming To The Specification Laid Down In Indian railway Standard Specification No.irst-19-2020 Up To Date Correction Slips With Single Shot Crucible fittedwith Automatic Tapping Thimble, 3 Pieces Pre Fabricated Mould (zircon Washed) Manually pressed Using Compressed Air Petrol/lpg Pre Heating For Execution Of Welding Of Rail Joint As Directed by The Engineer In Charge At Site. Note: 1. The Accessories Along With Welding Portion Shall Be supplied As Per Annexure-i Of The Irussor - 2021. 2. Rate Is Inclusive Of Transportation Of Above To sse/p.way Stores. For 60kg 90 Uts Rails

Details: Description:- Manufacturing And Supply Of Alumino Thermit Welding Portions Of 52kg/60 Kg/60ei- r260 As Approved By Rdso For Welding Of Rails 52kg/60kg/60ei-r260 Kg For 25mm Gap By The process Of At Welding Along With Complete Accessories Confirming To The Specification Laid Down In indian Railway Standard Specification No.irs/t-19-2020 Up To Date Correction Slips With Single Shot crucible Fitted With Automatic Tapping Thimble, 3 Pieces Pre Fabricated Mould (zircon Washed) manually Pressed Using Compressed Air Petrol/lpg Pre Heating For Execution Of Welding Of Rail Joint as Directed By The Engineer In Charge At Site. Note: 1. The Accessories Along With Welding Portion shall Be Supplied As Per Annexure-i Of The Irussor - 2021. 2. Rate Is Inclusive Of Transportation Of above To Sse/p.way Stores.(i)- For 52kg 90 Uts Rails

Details: Description :window Roller Blind For Vista Dome Coaches - Width 2200mm X 1450mm Pull Out Length - Fabric Of The Blind Confirming To Bs - 5867 - 2- 2008 / is 15590 - Shade Of The Fabric To Have Yellow Tone - Similar To Coach Interior Furnishing With Top Cover Either Aluminium Extruded Section Or Fabricated From A luminium Sheet With Suitable Mounting Clamps Arrangement Which Should Be One To One Replaceable With The Existing Ones With Suitable User Friendly Bottom hand Hold To Be Over The Full Width Of The Fabric Secured With Extruded Aluminium Section. The Up & Down Movement Of The Roller Blind Should Be Adjustable over The Entire Pull-out Length By Effortless Push Up Or Pull Down By Hand Only Without Any Stoppers & Without Any Automatic Spring Roll Back. Detail Drawing of Mounting Arrangement And Overall Drawing Is Not Available. Hence, 01 Sample To Be Approved For Practical Fitment Before Bulk Supply. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

Details: Supply Of Material And Execution Of Indoor & Outdoor Work For Provision Of Electronic Interlocking-msdac Based automatic Block Signalling System Between Marwar Kori(excl.) To Bhildi In Connection With Doubling Of Ln-smr- bldi Section Of Jodhpur Division Of North Western Railway. The Work Involves Provision Of New Electronic interlocking At Malwara, Raniwara, Marwar Ratanpur, Jari, Dhanera,ramsen,jenal Stations & Alteration In Ei At odhava Staion Of North Western Railway & Alteraion In Ei At Bhildi Junction Of Western Railway Along With Thirteen numbers Of Auto Signalling Huts . Provision Of Msdac Parallel With Dc Track Circuit In Yards & Dual Msdac In Block section Associated Works Like Trenching & Laying Of Signalling And Telecom Cables In Pre-fabricated Ducts/dwc/gi pipes, Supply-installation Of Point Machines, Apparatus Cases, Electric Lifting Barrier Gate, Signals, Track Circuit equipment, Earthing Material, Data Loggers, Eld, Fuse Alarms, Fire Alarms, Passenger Amenity Telecom Items Etc.

Details: Description:- Supply Of Multi Section Digital Axle Counter (msdac) For Mentioned Detection Point By the Purchased & Track Section As Per Sip, Complete With All Accessories, Cable Required With Each track Device & Card Viz. Axle Detectors, Track Side Electronics/dac Field Units, Central Evaluator (central Evaluator Unit Should Be Housed In A Pre-fabricated Rack To Be Supplied Along With The system), Reset Unit, Relay Unit, Event Logger & Diagnostic Terminals, Etc. Required For Different detection Points & Track Sections As Per Rdso Specifications No. Rdso/spn/176/2013, Ver.3 Or Latest and Oem/ Manufacturer's Specification And As Per Annexures. (quantity 01 No. = 01 Dp) Inspection authority: Rdso. Note:- As Per Wr's Policy No 03/2024 Para No. 3.4.2 .e .iv "vdu/reset Box Can Be used For Resetting. At Stations Having More Than 10 Track Sections, The Railway Propose To Use A separate Vdu-based Resetting System. Such A Vdu-based System If Using A Pc, It Must Be Industrial grade".

Details: Expression Of Interest (eoi) From Railtel’s Empaneled Business Associate Partners For selection Of Implementation Partner For Exclusive Pre-bid Teaming Arrangement for “supply Of Material And Execution Of Indoor & Outdoor Work For Provision Of Electronic interlocking-msdac Basedautomatic Block Signalling System Between Marwar Kori(excl.) to Bhildi In Connection With Doubling Of Ln-smrbldi Section Of Jodhpur Division Of North western Railway. The Work Involves Provision Of New Electronic Interlocking At Malwara, raniwara, Marwar Ratanpur, Jari, Dhanera, Ramsen,jenal Stations & Alteration In Ei At odhava Staion Of North Western Railway & Alteraion In Ei At Bhildi Junction Of Western railway Along With Thirteen Numbers Of Auto Signalling Huts . Provision Of Msdac Parallel with Dc Track Circuit In Yards & Dual Msdac In Block Section Associated Works Like trenching & Laying Of Signalling And Telecom Cables In Pre-fabricated Ducts/dwc/gi Pipes, supply-installation Of Point Machines, Apparatus Cases, Electric Lifting Barrier Gate, signals, Track Circuit Equipment, Earthing Material, Data Loggers, Eld, Fuse Alarms, Fire alarms, Passenger Amenity Telecom Items Etc.