Fabrication Tenders

Description: CATEGORY: Aluminium_LM_6_Fan Blades_10Nos_set or 8 Nos_Set_Part No_8002_AF_80 , Fan Pulley_Part No_8004_MMM VENTILATION FAN MODEL AF_80 , Jack Shaft_Part No_8005_MMM VENTILATION FAN MODEL AF_80 , Drive Pack Belt Guard_Part No_8012_MMM VENTILATION FAN MODEL AF_80 , Drive Pack belt_Part No_8017_MMM VENTILATION FAN MODEL AF_80 , Coupling_Part No_8020_MMM VENTILATION FAN MODEL AF_80 , Aluminium_LM_6_ Fan Hub_Part No_8001_AL_MMM VENTILATION FAN MODEL AF_80 , Aluminium_LM_6_Fab blades with studs_Nuts_washer_8Nos_Set_Part_No_65002AF_65 , Fan Shaft with 2 Nos Plummer Block with 2 Nos Bearing_Part_No_65003AF_65 , Fan Pulley_Part_No_MMM VENTILATION FAN MODEL AF_65 , Motor Pulley_Part_No_65005_MMM VENTILATION FAN MODEL AF_65 , Drive Pack belt_Part_No_65010_MMM VENTILATION FAN MODEL AF_65 , M.S. Fabricated Fan Hub_Part_No_65001_MMM VENTILATION FAN MODEL AF_65 , Coupling_Part_No_65012_MMM VENTILATION FAN MODEL AF_65 , Coupling_Part_No_G10009_MMM VENTILATION FAN MODEL AF_100_G , Jack shaft pully_Part_No_G10007_MMM VENTILATION FAN MODEL AF_100_G , Drive Pack Belt_Part No_G10011_MMM VENTILATION FAN MODEL AF_100_G

Description: CATEGORY: Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - ICGS C-424; L 53 Ship wardroom refrigerator not getting enough cooled and abnormal noise observed from compressor Defect to be rectified and proved for satisfactory ope.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - ICGS C-424; L 54 02 nos side clear view screen motor observed abnormal noise and motor showing zero insulation Make Ms Samyang marine 1 Phase 50 Hz motor to be overhaule.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - ICGS C-424; L 55 Waterjet compartment ventilation motor showing low insulation suspect motor winding to worn-out motor to be overhauled and proved for satisfactory opera.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - ICGS C-424; L 56 01 nos galley hotplate not getting enough heated showing zero insulation Abnormal noise observe from control panel and breaker frequently getting trip D.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - ICGS C-424; L 57 03 in nos window wiper not working window wiper motor showing low insulation Window wiper motor to be rewinded and wiper blade to be renewed as per sam.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - ICGS C-424; H 087 03 in numbers stanchions of STBD side at midship bent from centre deteriorated to be renewed fabricated as per sample Inway job includes cutting and we.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - ICGS C-424; E 048 Gear teeth of OBM throttle handle broken resulting in inability to increase RPM and OBM fixing handle corroded deteriorated Same to be renewed as per s..

Description: CATEGORY: HDPE laminated Sand Bag of size 75x40 cm, Sand colour and each bag having weight not less than 60 gms , SHS 6 mm thick size 120 x 120mm x 2.4m long for column with holes made on the top of coln as per design for fixing G1 Beam. Make, TATA oblique Sail oblique Jindal , ISMB 150 RSJ 150 x 75 mm G1 1.85 mtr long for beam conforming to relevant IS, Make, TATA oblique Sail oblique Jindal , ISMB 150 RSJ 150 x 75 mm G1 60 Cm mtr long for beam conforming to relevant IS, Make, TATA oblique Sail oblique Jindal , ISMB 125 RSJ 125 x 70mm G2 3.0m long for beam 2 conforming to relevant IS, Make, TATA oblique Sail oblique Jindal , SHS 6 mm thick size 70x70mm x 1.85m long for G3 Bottom bracing with conforming to relevant IS Make TATA oblique Sail oblique Jindal , 6mm thick MS plate 75x150mm welded with G1 beam connected with nut and bolts. , 6mm thick MS plate 100mm x 100mm with a gap of 75mm welded with coln bottom to connect 70mm x70mm SHS with nut and bolts, 04 each. , 12mm dia nut bolt 75mm long inserted in 12mm dia eight nos hole in each column. , 6mm thick MS base plate of size 150 x150 mm for SHS column including welding, knotching, cutting and nuts,bolts, washer etc. , Steel Roofing Trough SRT of size 1630 mm x 613 mm x 180 mm made out of 2 mm thick hot rolled carbon steel sheet conforming to relevant IS complete. , MS hexagonal nuts. Bolts and washers 12 mm dia 40 mm long. , LDPE sheet 3 m wide weighing 1 Kg oblique RM black in colour and shall contain not less than 2 percenttage of carbon black, Sample to be approved before supply. , Red Oxide primer conforming to relevant IS. , Synthetic Enamel Paint Colour Green Ist quality conforming to relevant IS, Make, Johnson and Nicholson India Ltd, Nerolac Paint and Asian Paint. , Thinner, Sample to be approved before supply. , Dry distemper, Sample to be approved before supply. , Chalk whiting, Sample to be approved before supply. , Paint Brush 4 inch Make, Amar oblique Lucky Sample to be approved before supply. , Pre fabricated steel door of size 0.90m x 1.80m made out of 2mm thick MS black carbon sheet welded to 30x30x6mm ISA door shutter frame fitted to 50x50x6mm ISA door frame. , Supply of Swivel Bullet proof glass glass 750mm x 500mm size 72 mm thick with fabricated iron frame including necessary locking arrangement in the frame to fix the glass in the loop hole. , Silicone Gel sealent of 01 pack of 400 gms including aplicator gun. , Ply wood 10 mm thick as per requirement for flat surface. , Foundation bolts of 16 mm dia and 250 m long with nut, bolts washer etc.

Description: CATEGORY: Aluminium_LM_6_Fan Blades_10Nos_set or 8 Nos_Set_Part No_8002_AF_80 , Fan Pulley_Part No_8004_MMM VENTILATION FAN MODEL AF_80 , Jack Shaft_Part No_8005_MMM VENTILATION FAN MODEL AF_80 , Drive Pack Belt Guard_Part No_8012_MMM VENTILATION FAN MODEL AF_80 , Drive Pack belt_Part No_8017_MMM VENTILATION FAN MODEL AF_80 , Coupling_Part No_8020_MMM VENTILATION FAN MODEL AF_80 , Aluminium_LM_6_ Fan Hub_Part No_8001_AL_MMM VENTILATION FAN MODEL AF_80 , Aluminium_LM_6_Fab blades with studs_Nuts_washer_8Nos_Set_Part_No_65002AF_65 , Fan Shaft with 2 Nos Plummer Block with 2 Nos Bearing_Part_No_65003AF_65 , Fan Pulley_Part_No_65004MMM VENTILATION FAN MODEL AF_65 , Motor Pulley_Part_No_65005_MMM VENTILATION FAN MODEL AF_65 , Drive Pack belt_Part_No_65010_MMM VENTILATION FAN MODEL AF_65 , M.S. Fabricated Fan Hub_Part_No_65001_MMM VENTILATION FAN MODEL AF_65 , Coupling_Part_No_65012_MMM VENTILATION FAN MODEL AF_65 , Coupling_Part_No_G10009_MMM VENTILATION FAN MODEL AF_100_G , Jack shaft pully_Part_No_G10007_MMM VENTILATION FAN MODEL AF_100_G , Drive Pack Belt_Part No_G10011_MMM VENTILATION FAN MODEL AF_100_G

Description: CATEGORY: Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - ICGS C-146; L 53 Ship wardroom refrigerator not getting enough cooled and abnormal noise observed from compressor Defect to be rectified and proved for satisfactory oper.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - ICGS C-146; L 54 02 nos side clear view screen motor observed abnormal noise and motor showing zero insulation Make Ms Samyang marine 1 Phase 50 Hz motor to be overhaule.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - ICGS C-146; L 55 Waterjet compartment ventilation motor showing low insulation suspect motor winding to worn-out motor to be overhauled and proved for satisfactory opera.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - ICGS C-146; L 56 01 nos galley hotplate not getting enough heated showing zero insulation Abnormal noise observe from control panel and breaker frequently getting trip D.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - ICGS C-146; L 57 03 in nos window wiper not working window wiper motor showing low insulation Window wiper motor to be rewinded and wiper blade to be renewed as per samp.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - ICGS C-146; H 087 03 in numbers stanchions of STBD side at midship bent from centre deteriorated to be renewed fabricated as per sample Inway job includes cutting and we.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - ICGS C-146; E 048 Gear teeth of OBM throttle handle broken resulting in inability to increase RPM and OBM fixing handle corroded deteriorated Same to be renewed as per s..

Description: CATEGORY: DE Spanner 12x13 , Adjustable Spanner8 , Cutting Plier , Tool Kit Bag Canvas , Screw Driver 12 300mm , Screw Driver 8 , First Aid Kit , Ring Spanner 10 x 11 , Ring Spanner 12 x 13 , Ring Spanner 18 x 19 , Phil Screw Driver 100mm long 6 Dia , Tube Hose Pump , Assy Wheel Nut M 20 x 2.5 , Screw Driver , Rubber Packing , Single Filament FHL 12V , Bush Engine Cleaning , Rubber Hose Radiator to Thermostate , Rubber Hose , Scabbard Dah Mk-3 , Bock Wooden for Jack , Chock Large , Tin Rectangular 5 Ltrs , MS Fabricated Parking Chock , Push Tap SS , Assy Pacer block Complete , Tyre Lever T L6 , Hand Lamp with Cable of lenth 10mm , Adjusting Screw , Fog Light 12V , Bulb F 15 W for Rear Indicator , Bulb 12V for Front Indicator , Block Jack , Box Tin Lamp Filament , Bulb 12 3 21 6 for Stop Lamp , Camp for Sheller Valcanizer 5 Minutes , Funnel Oil 152 mm Oval , Inserter and remover tyre valve , Philps Head Screwdriver 100mm Longtip , DE Spanner 5 8 x 9 16 SAE , DE Spanner 14 x 15mm , Tool Box , Bulb Turn Signal 12V and 21W , Jack with Handle 12Ton , Ruuber Hose Radiator to top cover water , PVC Hose Nipple , Sump Packing , Rubber Packing Main Hole Cover , DE Spanner 11 x 13 , Chocks Stoware Vehicle Timber , Inspection Lamp with 10 Mrs Long Table

Description: Scrap Ferrous Melting Consisting Of Coach - Cutting Parts, Window, Doors, Seat Bearth Frame, Shutters,silent Block, Wire & Wire Rope,m.s.& G.i.sheets ( Plane Or Corrugatted),m.s.& G.i.pipes Fabricated Structure, Follen Rod,pipe Fittings, Anchore Link,m.s. Cst-9,bmbc Cover,expended Metal Switch Boxes,hand Barrow,dust Cart,dust Shield Spring Gear Casing,brake Beam, Brake Shoe Head, Brake Shoe & Side Frame Key, Shuckle Stone, Lower Spring Seat, Protective Tube,pin, Nut, Bolt, Washer, Locking Plate,bond Strip, Rachet, Tirfor,pipe & Tie Bar Fencing, Pull Lift, Eq. Stay Shock Absorver, Slack Adjuster, Damper,gate, Helical Spring Up To 03 Coil,bucket, Battery Box, Fire Extinguisher,pan,rake Ballast, Wire Clawn, Brocken Helical Spring Up To Single Coil, Water Tank,dummy / Box, Empty Electric Panel, Foot Rest Plate, Foot Step,fan Blower, Empty Drums Cut Up & Damage Of Sorts,hooks With N.f., Nos Plate, Cut Pcs. Of Mast, Cut Pcs Of Location Box,pandrol Clip,crusible & Its Stand, Different Tipes Of Lid,& Other Various Released Melting Scrap From Loco, Carriage, Sig., Electric, Trd, Tmc, Of Sorts & Sizes With Steel ,c.i.,& Neg.n.f. Attachment If Any. Note- 1- L.b.p. 2- Cutting Allowed For Loading Purpose. 3- Digging Allowed If Required. 4- Other Than Melting Scrap If Found During Cutting ,loading & Digging Will Be Seperated & Not Delivered To Purchaser. Location - Lying At L/n-11 & Its Both Sides From Road To Tree Nos G-8 In Plot- G

Details: CATEGORY: 52 pin double density connector , Assembly Accessories , 19 Pin double density connector , 6 positions circular connector , Accessories Assembly , Micro D 51 Pin rectangular pigtail connector , Micro D 9 Pin rectangular pigtail connector , Micro D 9 socket pigtail connector , Micro D 15 Pin rectangular pigtail connector , Micro D 21 Pin rectangular pigtail connector , Micro D 25 Pin rectangular pigtail connector , Micro D 31 Pin rectangular pigtail connector , Micro D 37 Pin rectangular pigtail connector , RF TNC connector , Crimping toos Assembly accessories , DB9 socket connector , DB9 pin connector , DB50 socket connector , DB50 pin connector , DB26 socket connector , SMA male and SMA female connector , Standard crimping tool Assembly Accessories , Microdot connector , Mniature positive bayonet locking connector , Prefab cable for MILBUS SSR , Prefab cable for MILBUS DAU , Prefab cable for ethernet SSR , Prefab cable for ethernet DAU , Hook up Wire , 3 core cable , 4 core cable , Ethernet CAT 6a cable roll , Cable Loom Fabrication

Details: Description:- "design, Fabrication, Supply, Erection, Testing And Commissioning Of Cubicle Type 14swg Lt Weather Proof (outdoor Type) Ip 65 And Above Main Distribution Board Panel With Copper busbar Of 600 Amps Capacity Including Ammeter, Voltmeter, Selector Switches And Ryb Indication anddigital3-phasekwhmeterwithrs485portct'sofsuitableratioetc.withthefollowing switchgear. For Each Outgoing Mccbs Led Indication In On Position To Be Provided In Panel. Lt Panel boardshouldconfirmtois-8263,mccb'sshouldbeconfirmingtois-2516&shouldbe microprocessor Based. Arrangements Of Switch Should Be Lockable & Shutdown Condition To Avoid electrician And Mccbs Feeder Details Stricking On The Panel 2x320a 4 Pole Mccb 50 Ka Incoming ,out going 1x160a 4 Pole Mccb 36 Ka ,out Going 2x100a 4 Pole Mccb 36kaout Going Out Going 2x63a Fp mcb 10ka Out Going 2x32a Fp Mcb 10ka Out Going 1x50kvar Capacitor Bank (2x5kvar, 2x10kvar, 1x20kvar) Of Reputed Brand. 1x320amps Change Over Switch 1no. Three Phase Electronic Energy meter With Cts Of Suitable Ratio "

Details: Description:- Fabrication, Design, Supply, Carrying And Erection Of 12 Mtr Height Swaged Type (410- sp-66) G.i. Tubular Pole (including Supply And Fixing Of Base Plate And Pole Cap) By Earth Digging To A depth Of 1/6th Of The Pole Height With Cc Foundation In Ratio 1:2:4 By Cement ,sand And Stone Of nominal Size 20 Mm & The Size Of The Cc Block Will Be 30 Cm Dia With Height Upto The Pole Depth below Gl And 30 Cm Above Gl For Muffing. The Pole Shall Be Hot Dip Galvanized With An Average coating Thickness Of 70 Microns Conforming To Is:2629/is:2633/is:4759. The Pole Swaging, Welding and Base Plate Welding To Be Done As Per Is:2713. The Material Construction(pipe) Shall Confirm To is:1161/is:1239 And Shall Be Able To Withstand Maximum Wind Speed Conforming To Is:875. Anti- climbing Device By Barbed Wire Upto 2.5 Mtr Height With Necessary Gi Clamp/nut/bolts, Etc Has To Be provided.danger Board Of Size 8"x6" Fixed With Suitable Gi Clamp Has To Be Provided Showing The voltage Grade,skull Etc. The Whole Work Shall Be Executed As Per Direction Of Engineer In Charge At site