Fabrication Tenders

Description: CATEGORY: Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - ICGS C-412; E 120 Both sea chest strainers corroded and thinned down resulting in excess accumulation of sea weeds Deteriorated strainers cause insufficient sea water su.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - ICGS C-412; E 121 Chequered plates carpet area approx 12 mtrs in engine room and water Jet are highly rusted deteriorated All plates along with supporting base frame riv.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - ICGS C-412; E 122 08 in nos quick shut off valve not operating from FM 200 compartment & port catwalk view loosened broken wire Wire to be fixed with QSV by cutting join.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - ICGS C 412; E 123 Sea water leakage observed in overboard flange of AC system flange to be fabricated and affixed as per sample material AL Pressure testing upto 1 5 tim.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - ICGS C 412; L 131 Illumination light on ships name plate at Superstructure observed defective The same to be repaired renewed and system to be proved; Service Provider

Description: CATEGORY: M. S. SOCKET SIZE-20MM NB FORGED TO A-105, CLASS 3000 (NON-IBR) SUITABLE FOR STEAM LINE AT A WORKING P , GUN METAL GLOBE VALVE IS 778: 1984, 50 MM, MAKE LEADER/NETA/KSB/ZOLOTO. , VALVE WHEEL (GLOBE TYPE) GUN METAL 20 MM TO SPECN: - IS 778-1980. MAKE LEADER/NETA/ZOLOTO/AUDCO/KSB O , VALVE WHEEL GUN METAL 25 MM SPECN: -1S-778-1980 MAKE LEADER/NETA/AUDCO/ZOLOTO/KSB. , M. S. SOCKET SIZE- 25MM NB FORGED TO A-105, CLASS 3000 (NON-IBR) SUITABLE FOR STEAM LINE AT A WORKING P , M. S. ELBOW SIZE-15MM NB 1.5D RADIUS 90 DEGREE BUTT WELD HEAVY DUTY (NON-IBR) SUITABLE FOR STEAM LINE , M. S. BEND SIZE -15MM NB RADIUS 90 DEGREE FABRICATED OUT OF CARBON STEEL SEAMLESS TUBES TO A -106, GRA , VALVE GLOBE GUN METAL 40MM STRAIGHT TYPE SPECN IS-778- 1980 MAKE LEADER/NETA/ZOLOTO/AUDCO/KSB. , VALVE GUNMETAL GLOBE TYPE SCREWED FEMALE END SIZE 15 NB TOSPECN: -IS-778/1984 CLASS-2(4TH REVISION) W

Description: Bazaar Scrap : Actual Lot No.03122505 0100, Pl No.98050047. (15) (hsn Code: 72044900-gst @18% On Fcm Basis) Cond. And Rusted And Corroded Us Bazaar Scrap Of Anti Monkey Device, Fabricating Scrap, Ec Boxes, Ms Doors, Angle Pieces, End Body Pcs. Trolley Frames, S Type Chair Pcs, Molb Pcs, Fiber Location Boxes, Gutter Sheet Pcs, Iron Brake Blocks, Chutes, Gi Binding Wire, Guard Chairs, Material Tubs, Board Frames, Earth Bonds, Springs, Pipe Pieces, Dsl/ele Loco Parts, Channel Pieces, Junction Boxes, Gear Cases, Ms Bonds, Wire Rope, Oil Filters, End Body Pieces, Gi Frames, Panto Strips, End Body Pcs, Battery Stands, Wire Rope Pcs. Iron Mesh, Rod Pieces, Ms Sheets, Loco Side Wall Filters, Hoop Iron, Wire Claws, Motor Pans, Mould Shoes, Crushed And Damaged 05, 20 Paint Drums And 210ltrs And 182 Kg Cap Oil Barrels Grease Barrels And Full Or Cut With Or Without Attachments. Locking Plates Valves, Bolts & Nuts, Washers, Rivets, Sheet Strips, Push Trolley Frames And Other Miscellaneous Items. Location: Both Sides Of Nf Ward Main Road, Cross Road And Workshop Road And Surroundings Of Nf Ward.

Details: Description:- Fabrication, Assembling, Supply, Fixing And Commissioning Of Lt Meter Box Outdoor type Of Size Appx. 900x450x250mm Made Of 16 Swg Crca Sheet Powder Coated Comprising Of 63a fp Mcb -1 No, 40a Fp Mcb - 1 No, 32a Fp Mcb - 1 No, 32a Contactor, 24 Hrs. Timer, 63a Cutouts - 3 nos And Neutral Link Etc. With 6mm Thick Hylum Sheet Fixed Inside To Mount The Accessories With provision For Fixing 1 No. Of Three Phase Kwh Meter With Pad Locking Arrangements (scope Does Not include Supply Of Kwh Meter) (before Supply Of This Item Contractor Shall Obtain The Permission From dy.cee/gsu/sbc)

Description: CATEGORY: Single Pole MCB 5 to 32 A , Erection of Metallic Pole , Street Light Timer Switch with Panel , Supplying and Drawing of Wire of size Having 3x1.5 sqmm , Earthing with G.I Plate 600x600x6 mm , Earthing with Copper Plate 600x600x6 mm , XLPE Armoured Cable 3 Core 10 sqmm Armoured Cable , XLPE Armoured Cable 3.5 Core 16 sqmm Armoured Cable , XLPE Armoured Cable 3.5 Core 50 sqmm Armoured Cable , 25x5 mm GI Strip , SITC of 72 Watt LED Street Light with complete Accessories , Hot Dip galvanised octagonal pole 6 metre height with base plate welded at bottom , Self ADHESIC PVC Type 5 Metre , Solar Street Light LED based consist of white LED luminaire LED sum Driver rating as per configuration along with Solar PV modules and LiFePo4 battery of capacity having 30 Watt , SITC of totally enclosed cubical type compartmental floor mounting panel board of size 1450mm x 1000mm x 500mm , Supply and Fitting of Glow Sign Board 15X3 feet size with MS Structure support , IP Based Dome Camera of 4 MP , IP Based Bullet Camera of 4 MP , 8 Channel NVR , 43 inch LED TV , 6 TB Harddisk Drive , 4 U Rack , 8 Port POE Switch with 2 Fiber SFP Ports , Single Media Converter , 32 HDPE Pipe , 4 metre 50 mm dia GI Pipe , 5 Mtr 4K HDMI Cable , 20 mm PVC Conduit Medium Class , UTP 4 Pair CAT 6 LAN Cable , 2 KVA Online UPS with 30 Minute Battery Backup with SMF Batteries , Supply and Erecting of 250 kVAr APFC Panel , surge arrestor or surge protection device of type 2 tested for Imax 100 kA , Laying and Fixing of One Nos PVC Insulated XLPE Cable size above 185 sqmm and upto 400 sqmm , 3.5 sqmm 400 sqmm Aluminium Lugs and and Brass Gland , SITC of Astronomical Automatic Switch , Supplying and Laying of XLPE insulated 1.1 KV Grade 3.5 Core 400 Sqmm UG Cable , Supply and Installation of 125A, 36KA, PFMCCB with thermomagnetic release. , SITC of 5 to 32 A Class C MCB , Supply, Fitting and Fixing of 800A, Air circuit Breaker , Supplying and fitting CRCA sheet with fabrication of boxes panel boards as per Boq , Supplying, installing on wall, testing and commissioning rising mains as per Boq , Supplying and erecting panel mounting type digital ammeter having three and half digit LED display, external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply , Supplying and erecting panel mounting type digital voltmeter having three and half digit LED display, calibrated for 0 to 750V AC suitable to operate on 500V AC supply , Supplying and erecting LED type indicating pilot lamp with LED colours red yellow, green 230, 250V

Details: Description:- Fabrication Of Insitu Glued Insulated Joints For 52kg./60kg. Rail To Rdso Drg. No.t/5361 During Day/night And Conforming To The Manual For glued Insulated Rail Joint 1998 Issued By Ministry Of Railways, Rdso/lucknow And In Accordance With The Process Sheet Of Eastern Railway, Plant depot/mughalsarai At 4.11.98 With Supply Of All Fittings And Accessories Such As - [a] 950mm Long Fish Plate Or As Per Rdso Drawing [b] Hts Bolts And Nuts [c] Purchased Washers [d] Insulating Bushes [e] Insulating Channels [f] 10mm Thick End Post [g] Araldite [h] Hardener [i] Glass Cloth Carrier With All materials & Fixtures For Cleaning And Assembling Excluding Rail. [work Has To Be Execute By Rdso Approved Firm] Note - 950 Mm Long Fish Plates And Hts bolts Should Be Got Inspected By Rites Before Supply And Fixing In Track. Special Conditions - 1. The Work Is To Be Completed Within (12) Twelve Months from The Date Of Issue Of Letter Of Acceptance. 2. No Break Up In Rates Will Be Accepted. 3. Indian Railways General Condition Of Contract And Standard specification 2020 Will Be Binding On The Contract. 4. Current Goods And Service Tax Registration Is To Be Submitted. 5. 950mm Long F/plates And Hts Bolts should Be Got Inspected By Rites Before Supply And Fixing In Track. 6. Only The Firms Having Rdso Approval In Manufacturing Glued Insulated Joints Can participate In This Tender. 7. Tenderer[s] Have To Submit Certificate Regarding Approved Firms Under Rdso For Manufacturing And Fabrication Of Glued Joints as Per Rdso Drawing No.t-5361/t-5843.

Details: Check Survey, Fabrication, Galvanisation and Supply of Tower Material and it’s accessories, ACSR “Panther” Conductor, OPGW along with its hardware fittings, Polymer Insulators etc., Transportation, Insurance, Handling of all the Material, Stubbing, Tower Erection, Earthing, Stringing & Sagging of Conductor and OPGW, Testing and Commissioning of 66kV S/C Transmission Line on D/C Towers by Shifting of tower no. T-57 of 66 kV S/C Barotiwala- Nalagarh transmission line at Village Khera and tower no T-03 & T-04 of 66 kV S/C Barotiwala- Nalagarh transmission line (Fujikawa) at Village Bagbania due to Four Laning of Pinjore- Nalagarh National Highway under ES Division Nalagarh on Turn Key Basis against tender specification no. SSD-562/2025

Details: Description:- Supply,fabricationanderectionofsteelmemberstoreplaceexistingcorroded members Of Built Up Section Made Up Of Ms Plate, Angles, Channels Of Different Thickness And Sizes including Painting With One Coat Of Ready Mix Paint Zinc Chromate Priming To Is:104 Followed By One coat Of Ready Mix Paint Red-oxide Zinc Chrome Priming Paint To Is:2074. Structural Steel Should conform To Is:2062 E250- Grade'b0'. Fabrication And Erection To Be As Per Existing Design Initially By bolts And Nuts And Finally By Rivetting During The Sanctioned Traffic Block. Rate Includes Cutting Of New steel Work, Removal Of Rivets By Drilling, Dismantling Of Any Existing Members Required For Inserting fabricatedmembers,fixingofnewfabricatedbuiltupmemberswithalltools,plants,labour, consumables, Machinery And Accessories Etc. Work Will Be Executed As Per Irs:b 1-2001. Note: painting Shall Be Paid Extra Under Relevant Item.

Details: MTPS- II – Mill Plant Division – Reconditioning of pin bolt, Pin bolt inserting bore of the roller tyre holding yoke frame assembly, Roller tyre RTD cover plate, worn out surface of loading frame assembly, hydraulic shaft tension rods, Renewal of worn out coal pipes, dismantling of flanges from old coal pipes & welded with new coal pipes, collar seating worn out portion of 90˚ & 90˚+ 65˚ coal bends, hard facing of dia 600 mm old coal bend, worn out seal cover seating distance spool piece flanges, Fabrication & replacement of worn out Deflector cone and coal feeding centre pipe (partial length) at inner side of classifier assembly etc… in coal mill – F/H.

Details: Description:- Supply,fabricationanderectionofsteelmemberstoreplaceexistingcorroded members Of Built Up Section Made Up Of Ms Plate, Angles, Channels Of Different Thickness And Sizes including Painting With One Coat Of Ready Mix Paint Zinc Chromate Priming To Is:104 Followed By One coat Of Ready Mix Paint Red-oxide Zinc Chrome Priming Paint To Is:2074. Structural Steel Should conform To Is:2062 E250- Grade'b0'. Fabrication And Erection To Be As Per Existing Design Initially By bolts And Nuts And Finally By Rivetting During The Sanctioned Traffic Block. Rate Includes Cutting Of New steel Work, Removal Of Rivets By Drilling, Dismantling Of Any Existing Members Required For Inserting fabricatedmembers,fixingofnewfabricatedbuiltupmemberswithalltools,plants,labour, consumables, Machinery And Accessories Etc. Work Will Be Executed As Per Irs:b 1-2001. Note: painting Shall Be Paid Extra Under Relevant Item.