Drawer Tenders

Details: Creation of 63 KVA Electric Sub Station Moh. Makhna Ward No. 7 Pyt. Bhatidhar, 25 KVA Transformer at Ward No. 1 Panchayat Karmara Mohalla Bakarwala, Providing of Electricity by way of uncovered areas in village Gagrian Sawjian, Kanari Upper, Sib Loran, Balnoi Top, Chamrar, Doba Mora and Salani Top by way of Providing of 2x63 KVA S/Stn +3x25 KV Sub Statin alongwith HT/LT Line and Poles, Creation of 63 KVA Sub Station at Mohalla Domallan Keri Near Mohd Javir Panchyat Gulhotta Kangra, 63 KVA Transformer Mohalla Tand Ward No. 8 Pyt. (Chhungan Choudhrain), 63 KVA Transformer Nr. Pervaiz Khan Mohalla Marg Pyt. Sangoite, Creation of 63 KVA Transformer at Mohalla Sayidan Near Zarayat Ralian, Laying of LT Line at Danna Doyian Mohalla Kumaran Ward No. 1 Panchyat Timbra, Laying of LT at Qazi Mhra ward No. 1 and Creation of 63 KVA Sub Station alongwith Poles at Moh. Sheikh Maglanu Nar Mankote Nr. Mir Mohd under SSY & APDP Grant 2024-25 (All the items should be as per latest specifications and drawing adopted/Approved by Department)

Details: SET OF SEATS & BERTHS FOR LHB GS COACHES. FOLLOW CUSHIONING MATERIAL PU F OAM TO RDSO SPEC. RDSO/2007/CG-04 REV.-01 AND UPHOLSTERY TO RDSO SPEC.RDSO/2008/CG-07 REV.-01 WITHOUT FIRE BARRIER. FOLLOW COLOUR SHADE ALNAC-03 FOR UPHOLSTERY. FOR PAINTIN G OF THE VISIBLE METALLIC PORTIONS OF SEATS & BERTHS COLOUR SHADE RAL-9006 TO BE FOLLO WED., as per Drawing: MPLSEATGS VERSION 0, Packing Instruction: ALL PROTRUDING PORTIONS OF S EAT/BERTH SHOULD BE PROTECTED WITH ENVIRONMENT FRIENDLY PRE MOULDED THERMOCOL CAP OF REQUISITE STRENGTH OR SILICON RUBBER CAP AS AN ALTERNATE OPTION. EACH INDIVIDUAL SEA T/BERTH SHOULD BE COVERED WITH BIODEGRADABLE BUBBLE SHEET OF DIAMETER 10MM AND THIC KNESS 30 MICRON ALL ROUND. FLAP OF BERTH SHOULD BE OUTSIDE THE BUBBLE SHEET PACKING LE AVING SEAT & BERTH MOUNTING UNCOVERED. THEN IT SHOULD BE WRAPPED ALL ROUND IN THICK L AMINATED JUTE FABRIC OF SUFFICIENT STRENGTH. THE ASSEMBLY SHOULD BE TIED WITH NYLON STR IPS. IT IS FURTHER WRAPPED WITH BIODEGRADABLE POLYTHENE ALL ROUND TO PREVENT INGRESS O F DUST/WATER. FOR THE FOLLOWING ITEMS (IF COVERED UNDER S&B SET) THE ITEM-WISE PI (LATEST VER.) WILL B

Details: Supplying, Fabrication, Erection on suitable RCC foundation and Commissioning including 3 (three) months Trial Run and 5 (five) years Operation and Maintenance including cost of routine testing of water sample for performance evaluation of Pressure Type Iron Removal Plant (Cumulative Capacity of 420 cum /hr)as per design norms of the P.H.E. Dte. with necessary accessories viz. MS fabricated shell with minimum 10 mm thick MS plate with 2 (two) coats of anticorrosive paint minimum 12 mm thick MS media supporting plate fitted with required no. of pot strainer, MS fabricated oxidation chamber with minimum 10 mm thick plate with necessary pipe connection, valves, Gauges & other instruments as required including preparation of detailed design & drawings duly vetted from IIT/NIT/JU/IIEST and the same is approved from the Deptt. including cost of filter media, Air Compressor & Air blower with motor, starter, main switch etc. of required capacity & approved specification including power connection from main line etc. all complete and construction of Blower Room, concrete platform & drain...etc. with common manifold connection for the water supply scheme within Buniadpur Municipality (Zone -1 to 7) under AMRUT 2.0.

Details: Description :mch Lock Assembly With 2 Key As Per Specification. Size: As Per Drawing No- B8/rs/72 57 Material: Main Body Lock - Free Cutting Brass (c3604bd) Cylinder-c3604bd, Cr-plate Latch-stainle ss Steel Bar (sus304) Finish Main Body: Nickel Plating (mbni) Lock: Chrom Plating (mbcr) Key Turn 9 00 Hardness: Ss Material - 70 Hrb Brass Material - 22-133 Hrb Uts (ultimate Tensile Strength ): 50 0-700 Mpa Endurance Test: 40,000 Cycles Operation Material Composition: Copper - 56.69%, Zinc - 3 8.67%, Tin - 0.600%, Lead - 2.28%, Iron - 0.620%, Aluminium - 0.510%, Nickel - 0.520%, Manganese - 0.038%, Arsenic - 0.012%, Phosporus - 0.013% And Silicon - 0.038% Hardness: 22-133 Hrb Uts (ult imate Tensile Strength ): 124-1030 Mpa Endurance Test: 40,000 Cycles Operation Note: All The Test C ertificates Should Be From Nabl Accredited Labs And Duly Signed And Sealed By A Signatory Authority of The Supplier. Make: Melco/takigen/amar Trading. ]

Details: Notice Inviting E-tender Punjab & Sind Bank, Guwahati Zonal Office Invites E- Tenders Under 2 Bids System I.e. Technical Bid & Financial Bid, From Reputed, Bona Fide And Intending Contractors In The Prescribed Format For Interior Furnishing (allied Works) Of Zonal Office Guwahati On 4th Floor Of Sethi Trust Building At Bhangaghar, G.s. Road, Guwahati, Assam. The Tender Is To Be Submitted Only By Eligible Furnisher Through Online Mode Only. Tender Documents, Technical Specification, Drawing, Bill Of Quantities Uploaded On Specific Interface Which Will Be On The Bank’s E-procurement Site. Furnisher May View The Tender Notice On Bank’s Website Https://punjabandsindbank.co.in And Download & Upload The Same From/on Bank’s E-procure Website Https://psb.eproc.in The Tender Should Be Uploaded On The Above Website Up To 24.02.2025 By 03.00pm. Technical Bid Will Be Opened On 24.02.2025 At 3.30 Pm. As Mentioned In The Tender Documents. The Bank Reserves Right To Cancel Any Or All Tenders And Stop The Process At Any Point Of Time Without Assigning Any Reason Or Notice Whatsoever. For Any Further Clarification/query Contact-+91-7896536440 During Office Hours From 10.00 Am To 5.00 Pm Over Phone Or In Person. Zonal Manager Click Here

Details: Notice Inviting E-tender Punjab & Sind Bank, Guwahati Zonal Office Invites E- Tenders Under 2 Bids System I.e. Technical Bid & Financial Bid, From Reputed, Bona Fide And Intending Contractors In The Prescribed Format For Proposed Interior Furnishing, Electrical, Lan Cabling, Ac Works, Cctv, Fire Alarm & Civil Work For Interior Renovation & Re-furnishing Of Model Branch At Deulahland, Imphal, Manipur. The Tender Is To Be Submitted Only By Eligible Furnisher Through Online Mode Only. Tender Documents, Technical Specification, Drawing, Bill Of Quantities Uploaded On Specific Interface Which Will Be On The Bank’s E-procurement Site. Furnisher May View The Tender Notice On Bank’s Website Https://punjabandsindbank.co.in And Download & Upload The Same From/on Bank’s E-procure Website Https://psb.eproc.in The Tender Should Be Uploaded On The Above Website Up To 26.02.2025 By 03.00pm. Technical Bid Will Be Opened On 26.02.2025 At 3.30pm. As Mentioned In The Tender Documents. The Bank Reserves Right To Cancel Any Or All Tenders And Stop The Process At Any Point Of Time Without Assigning Any Reason Or Notice Whatsoever. For Any Further Clarification/query Contact-+91-7896536440 During Office Hours From 10.00 Am To 5.00 Pm Over Phone Or In Person. Zonal Manager Click Here

Details: Notice Inviting E-tender Punjab & Sind Bank, Guwahati Zonal Office Invites E- Tenders Under 2 Bids System I.e. Technical Bid & Financial Bid, From Reputed, Bona Fide And Intending Contractors In The Prescribed Format For Proposed Interior Furnishing, Electrical, Lan Cabling, Ac Works, Cctv, Fire Alarm & Civil Work For Interior Renovation & Re-furnishing Of Model Branch At R.g.barua Road, Chandmari, Guwahati, Assam. The Tender Is To Be Submitted Only By Eligible Furnisher Through Online Mode Only. Tender Documents, Technical Specification, Drawing, Bill Of Quantities Uploaded On Specific Interface Which Will Be On The Bank’s E-procurement Site. Furnisher May View The Tender Notice On Bank’s Website Https://punjabandsindbank.co.in And Download & Upload The Same From/on Bank’s E-procure Website Https://psb.eproc.in The Tender Should Be Uploaded On The Above Website Up To 17.02.2025 By 03.00pm. Technical Bid Will Be Opened On 17.02.2025 At 3.30pm. As Mentioned In The Tender Documents. The Bank Reserves Right To Cancel Any Or All Tenders And Stop The Process At Any Point Of Time Without Assigning Any Reason Or Notice Whatsoever. For Any Further Clarification/query Contact-+91-7896536440 During Office Hours From 10.00 Am To 5.00 Pm Over Phone Or In Person. Zonal Manager Click Here

Description: 829921690010 srph346350-vacutainer Needle With Visibility Of Blood Entry 21g For Multi-sample Colle ction Should Have The Following Specifications: 1). The Designing Of The Needles Should Be Such Th at It Can Able To Minimize The Pre- Analytical Variability Throughout The Specimen Collection And H andling Process To Ensure Reliable Results And Should Be Suitable For Faster Procedures. 2). The needles Should Be Suitable For Closed- System Blood Collection I.e Drawing Blood Directly From T he Vein Into Vacuum Collection Tubes To Prevent Exposure Of Atmosphere. 3). The Needles Should B e Suitable For Multi- Sample Collection.4). Needles Should Be Sterile, Double-ended With A Sleeve C overed Safety Valve For Use With Vacutainer Tube Holder And Vacuum Blood Collection Tubes. 5). S ize Of The Needle Should Be 21g X 1 Inch (gauge: 21g, Length: 1 Inch./25 Mm).6) Needle Design Should provide Instant Confirmation Of Needle Placement, Through Visual Flashback Indication.7). There S hould Be A Chamber Or Similar Arrangement At The Needle Junction For Easy Visual Confirmation Of blood Flow Entry.8). Needle Should Have Low-angle Bevel Design And Should Be Coated With Silico ne/ Similar Low Friction Lubricant Coating To Ensure Gentle And Smooth Vein Entry (for Smooth Pai nless Pricking To The Patients 9). The Firm Should Provide Certificate Of Compliance Report For Eve ry Batch And Material Used For Making The Needle And Sterilization Of The Needle Should Comply W ith Iso Standards.10). The Product Should Be Bis/iso/ce/us Fda Certified And Should Produce The Ce rtificate While Quoting In The Tender.11). The Firm Should Supply Suitable Needle Holders Along Wit h The Needle Supply And Also Should Submit Adequate Sampling Material For Checking Suitability & for Validation, Verification Of Productunit:no ] consignee Acms/drug Stores/rh/pgt, Sr Kerala 1000.00 Numbers

Description: 829921690010 srph346350-vacutainer Needle With Visibility Of Blood Entry 21g For Multi-sample Colle ction Should Have The Following Specifications: 1). The Designing Of The Needles Should Be Such Th at It Can Able To Minimize The Pre- Analytical Variability Throughout The Specimen Collection And H andling Process To Ensure Reliable Results And Should Be Suitable For Faster Procedures. 2). The needles Should Be Suitable For Closed- System Blood Collection I.e Drawing Blood Directly From T he Vein Into Vacuum Collection Tubes To Prevent Exposure Of Atmosphere. 3). The Needles Should B e Suitable For Multi- Sample Collection.4). Needles Should Be Sterile, Double-ended With A Sleeve C overed Safety Valve For Use With Vacutainer Tube Holder And Vacuum Blood Collection Tubes. 5). S ize Of The Needle Should Be 21g X 1 Inch (gauge: 21g, Length: 1 Inch./25 Mm).6) Needle Design Should provide Instant Confirmation Of Needle Placement, Through Visual Flashback Indication.7). There S hould Be A Chamber Or Similar Arrangement At The Needle Junction For Easy Visual Confirmation Of blood Flow Entry.8). Needle Should Have Low-angle Bevel Design And Should Be Coated With Silico ne/ Similar Low Friction Lubricant Coating To Ensure Gentle And Smooth Vein Entry (for Smooth Pai nless Pricking To The Patients 9). The Firm Should Provide Certificate Of Compliance Report For Eve ry Batch And Material Used For Making The Needle And Sterilization Of The Needle Should Comply W ith Iso Standards.10). The Product Should Be Bis/iso/ce/us Fda Certified And Should Produce The Ce rtificate While Quoting In The Tender.11). The Firm Should Supply Suitable Needle Holders Along Wit h The Needle Supply And Also Should Submit Adequate Sampling Material For Checking Suitability & for Validation, Verification Of Productunit:no ] consignee Acms/drug Stores/rh/pgt, Sr Kerala 1000.00 Numbers

Description: Schedule Above Referred To:property No.1 First Schedule (description Of Land)all That The Piece Or Parcel Of Revenue Redeemed Land, Hereditaments And Premises Whereon Or Part Whereof The Said Building Is Standing Admeasuring 3 Collahs 11 Chittacks And 35 Sq. Ft., A Bit More Or Less Lying And Situate At The Municipal Premises No. 53, Dr. Meghnad Saha Sarani (formerly Named As Southern Avenue), Kolkata 700 029, Comprised In Holding No. 58, Sub-division "p", Division Vii, Dihi Panchannagram, Police Station-tollygunge, Now P.s- Lake, Kolkata Municipal Corporation Ward No. 87, District Registration Office At Alipore, District 24 Parganas (south) Butted And Bounded In The Manner As Follows:north: By The Premises No. 538. Dr. Meghnad Saha Sarani,south: By The K.m.c. Road Named As Dr. Meghnad Saha Sarani (formerly Named As Southem Avenue), East. By The Premises No. 53/1. Dr. Meghnad Saha Sarani West: By 40 Feet Wide K.m.c. Road Named As Lake Place Second Schedule (description Of Mortgage Flat)all That The Southern Side Of The Second Floor Flat Of The Building Admeasuring Super Built Up Area Of 1398 Sq. Ft., A Bit More Or Less Consisting Of Two Bedrooms, One Drawing Cum Dining Space, One Box Room, Two Baths With Privies With Modern Fittings, Two Verandahs Projected On Two Roads Lying And Situate At The Municipal Premises No. 53, Dr. Meghnad Saha Sarani (formerly Named As Southern Avenue), Kolkata 700 029, P.s. Tollygunge, Now P.s. Lake, Together With The Undivided Proportionate Share And/or Interest In The Land Comprised In The Said Premises Attributable To The Said Flat/unit And In The Common Areas, Facilities, Amenities And Installations In The Said Building. This Property Is In The Name Of Avik Kanti Paul Vide Registered Deed No. 369 Of 2010property No.2first Schedule (description Of Land) All That The Piece Or Parcel Of Revenue Redeemed Land, Hereditaments And Premises Whereon Or Part Whereof The Said Building Is Standing Admeasuring 3 Collahs 11 Chittacks And 35 Sq. Ft., A Bit More Or Less Lying And Situate At The Municipal Premises No. 53, Dr. Meghnad Saha Sarani (formerly Named As Southern Avenue), Kolkata 700 029, Comprised In Holding No. 58, Sub-division "p", Division Vii, Dihi Panchannagram, Police Station Tollygunge, Now P.s.- Lake, Kolkata Municipal Corporation Ward No. 87, District Registration Office At Alipore, District 24 Parganas (south) Butted And Bounded In The Manner As Follows:north: By The Premises No. 53b. Dr. Meghnad Saha Sarani,south: By The Km.c. Road Named As Dr. Meghnad Saha Sarani (formerly Named As Southern Avenue);east. By The Premises No. 53/1. Dr. Meghnad Saha Sarani West: By 40 Feet Wide K.m.c. Road Named As Lake Placesecond Schedule (description Of Mortgage Flat)all That The Northem Side Of The Second Floor Flat Of The Said Building Admeasuring Super Built Up Area Of 500 Sq. Ft., A Bit More Or Less Consisting Of One Bedroom, One Bath With Privy With Modern Fittings, A Small Terrace In The North, One Verandah Projected On One Road Together With One Covered Car Parking Space On The Ground Floor Of The Said Building Admeasuring 120 Sq. Ft., A Bit More Or Less Lying And Situate At The Municipal Premises No. 53, Dr. Meghnad Saha Sarani, (formerly Named As Southern Avenue), Kolkata 700 029, P.s. Tollygunge, Now P.s.- Lake, Together With The Undivided Proportionate Share And/or Interest In The Land Comprised In The Said Premises Attributable To The Said Flat/unit And In The Common Areas, Facilities, Amenities And Installations In The Said Building.