Military Engineer Services Tender
... More
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Technical
Technical
Financial
Class Of Bidder
... View More
The class eligibility requirement to bid or participate in this tender is categories SS to E.
Technical Capacity
... View More
The required prior work experience for the bidder includes completion of similar nature of works during the last five years, with details of three highest valued works. The bidder should have completed similar works satisfactorily and meet the criteria of upgradation in respect of past experience of completed works and financial soundness. The value and percentage of similar works completed are not explicitly mentioned. However, the bidder should have completed works with a value that indicates their capability to execute the contract. For MES enlisted contractors, the contractor shall be enlisted with MES in Class 'SS' & above and category 'a(i)' subject to satisfactory remarks with regard to performance in respect of works in hand. For contractors not enlisted with MES, the firm shall meet the enlistment criteria of 'SS' class MES contractors & category 'a(i)' contractor with regard to satisfactorily completion of requisite value of works with Central/State Government/Central/State PSUS/ AWHO/ AFNHB/ CGEWHO/ DGMP, Annual turnover, bank solvency, working capital, and other requirements. The estimated cost of the work is Rs. 4703.84 Lakhs, and in terms of specific values, the financial limit for certain disputes shall be Rupees two lakhs or one percent of the contract amount, whichever is less. The cost of tender documents is Rs. 3,000/-, and the earnest money is Rs. 15,00,000.00.
Costs
EMD
₹ 15,00,000Document Cost
₹ 3,000Tender Fee
Refer Documents
Summary
Special Repair Of 216 Du Of Salaria Enclave At Sector 21 Dwarika
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_698077_1Tender No
CEDZ/TOKEN-05 OF 2025Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
M&L for providing rust proof /anti corrosive treatment to bars :-
(i) cleaning of all exposed bars (new & old) alround
(ii) Apply a single coat of Alkaline rust converting primer on alround bars new & old as recommended by the manufactuer
(iii) Apply two coats of Epoxy phenolic anti corrosive protective coat on bars alround new & old as recommended by the manufactuer. Note : Anti corrosive treatment shall be continuous espcially in the regions where pitting, imperfections, etc were present on the surface of the bars. It is important that the rear portions of re-bars (those towards the concrete substrate) should not be left without coating.
NOTE :- Measurement will be taken of surface area of reinforcement bars.
1200
-
-
... More
M&L for providing PMM (Polymer modified cementitious mortar) :-
(i) Dry sub strate surface and free of debris & dust
(ii) Applying Epoxy bond coat on the sound substrate using approved spray machine & ensuring that no pin holes are visible.(In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes).
(iii) Immediately after application of epoxy bond coat as above apply PMM (Polymer modified cementitious mortar) upto 50 mm thickness.
Note : Application of PMM shall be preferably be in coats of appx 10mm thickness. PMM work shall be executed in fairely rapid successions so as entire work is completed with in 30 mins). PMM shall be pre packed ready to use.
(iv) PMM surface to be moist cured for three days followed by air curing in temperature as recommended by manufactuer complete all as specified and directed.
3672
-
-
... More
1. Injecting microfine cement in the porous and honey comb concrete with the help of plastic nozzals 12 mm dia with the help of the drill machine 2. Packing the nozals with the help of the cement mortar 3. Marking the area in marker as directed by the Engr-in-charge. 4. Drilling holes of 16mm dia in an orthogonal grid on exposed cone of member @ 150 mm c/c both way, depth of the hole shall be about 60% of the element thickness. Note : pressure shall be in the range of 6 Bar and shall be done in nipples one by one as per order recommended by manufacturer. Mixing of resin and hardenere shall be mixed in small quantities so as it is consumed with in 30 minutes. Before use mixer shall be stirred thorough.
2700
-
-
... More
Providing and suppling and injecting microfine cement with the 8000 Blaine in the the area as directed by engr-in-charge.
540
-
-
... More
Supply & fixing 12 mm dia steel sheer connector in grid pattern in between old core and new concrete as wherever directed by Engr-in-charge and as specified by manufacturer including drilling hole of depth of 100 mm and chemical anchoring with pure epoxy resin anchoring mortar (Master flow 935 of BASF or equivalent FOSROC/SIKA). ( The cost of drilling hole & chemical anchoring with epoxy resin is inclueded in this item) complete all as specified and directed.
4320
-
-
... More
M&L for Providing & Pouring Micro concreting M-40 grade :-
(i) Dry concrete substrate surface and free of debris & dust
(ii) Applying Epoxy bond coat on the sound concrete substrate using approved spray machine & ensuring that no pin holes are visible. (In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes).
(iii) Immediately after application of epoxy bond coat as above pour Micro concreting M40 grade, Make : MasterEmaco S46T of BASF or equivalent FOSROC/SIKA using approved mixing machines/pumping under pressure via approved pneumatic pump at the locations to be repaired in RCC beams & columns etc,. Adding of aggregates will be permitted only as per manufacturer’s recommendation without compromising the strength. The rate shall include cost of all materials (except re-bar) labour charges for mixing, pouring concrete, cost of tools, lead & lift of materials, transportation etc., to carry out the complete work complete all as specified and directed.
Note : The cost of micro concrete M-40 grade & Epoxy bond coat is inclueded in this item.
167.4
-
-
... More
M&L for Drilling & chemical anchoring of new rebars/stirrups :-(i) Drilling in to the sound RCC members for anchoring of rebars/stirrups as directed, the dia of hole to be match with dia of rebar & length of drilling as under :-8 mm dia bar - drilling length 80 to 100 mm - 384 NosNote : Anchoring of new re-bars of any dia as directed in to the sound RCC members as directed using pure epoxy resin anchoring mortar (Master flow 935 of BASF or equivalent FOSROC/SIKA) with appropriate diameter of drilling of holes as mentioned above for proper bonding into the concrete etc., complete. (The cost of drilling hole & chemical anchoring with epoxy resin is inclueded in this item)
13500
-
-
... More
M&L for Drilling & chemical anchoring of new rebars :-
(i) Drilling in to the sound RCC members for anchoring of rebars/stirrups as directed, the dia of hole to be match with dia of rebar & length of drilling as under :-
16 & 20 mm dia bar - drilling length 160 to 180 mm
Note : Anchoring of new re-bars of any dia as directed in to the sound RCC members as directed using pure epoxy resin anchoring mortar (Master flow 935 of BASF or equivalent FOSROC/SIKA) with appropriate diameter of drilling of holes as mentioned above for proper bonding into the concrete etc., complete. (The cost of drilling hole & chemical anchoring with epoxy resin is inclueded in this item)
324
-
-
... More
M&L for use & waste of form work using steel sheets , steel bracing, propping etc around structural members where micro concreting to be done and keeping form work in position till required specified period complete all as specified and directed.Note : Form work shall be 100% leak proof. For purpose of payment area in touch with concrete shall be measured.
3240
-
-
... More
S&F for stengthening existing reinforcement by use of mild steel bars of any dia , cut to length, bent to shape required, including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
11340
-
-
... More
M&L for Chipping of spalled and loose concrete and cleaning rust from reinforcement by sand blasting scrubbing down concrete surface with wire brushes, cleaning with water, allowed to dry and applying a layer of antirust and then Zinc rich epoxy primer all as specified followed by a layer of bonding coat & then guniting over steel welded mesh 2mm dia of wire and aperture 75mm total thickness of guniting upto 50mm thick with cement mortar 1:2 using OPC 43 grade cement and finally applying cement plaster over guniting surface of required thickness to give even, uniform, and smooth finish conforming to proper geometrics in cement mortar 1:3 to match with the existing surface as in sides and soffits etc. slabs, Chajjas, fins, facias, parapets, beams and columns etc complete including necessary scaffolding, shuttering, necessary chases to brickwork or RCC members at any height up to 2 storey building complete all as directed. Note: Steel Welded mesh is to be welded with existing reinforcement. The Cost of welded mesh is deemed to be included in the unit rate quoted and the work to be carried out up to 2 storey bldgs/in floor roofs.
1620
-
-
... More
REPAIR TO DECAYED BRICK WALL INCLUDING EXTERNAL /INTERNAL FINISHING
-
-
-
... More
Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar incl aii quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete article in any position / situation in walls/parapets complete all as specified and directed.
1530
-
-
... More
M&L Brick work with burnt clay bricks(old size) in cement mortar 1:6 , with subclass 'B' bricks, straight or curved in plan exceeding 6 m mean radius. complete all as specified and directed.
1530
-
-
... More
M&L for repair of decayed brick work by cutting half protion of existing brick work and filling by PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) of surface area not exceeding 0.1sqm at one span complete all as specified and directed.
54
-
-
... More
Taking down cement plaster/grit plaster or any type of plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and removing outside MOD land.
124176
-
-
... More
M&L for 10mm thick rendering on brick or concrete wall surfaces with ready mixed mortar having equivalent ratio on fair/rough surface, finished the surface even and fair, complete all as specified and directed.
48600
-
-
... More
M&L for 15mm thick rendering on brick or concrete wall surfaces with ready mixed mortar having equivalent ratio on fair/rough surface, finished the surface even and fair, complete all as specified and directed.
79380
-
-
... More
M&L for preparation on new external plasterd surfaces of walls and applying 1-2mm thick cement base wall care putty on the whole surface to achieve smooth, even & uniform surface including grinding with sand paper and levelling of surface and applying two coats of acrylic smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm, complete all as specified and directed. Note: (a) All works shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufacture shall have valid authrisation letter from the manufacturer (minimum regional HQs) issued not earlier than 30 days from start date of the said finishing work. (c) The contractor shall provide application for testing and certification of finishes by paint manufacturing firm/ their authorised applicator. (d) Cost of all above aspects shall be deemed to be included in quoted rate of the contractor
79380
-
-
... More
Preparation of old internal wall surface by complete removal of existing treatment by scraping down with mechanical or manual means and preparing the surface by bromming/washing/rubbing down etc. including two coats of oil bound distemper over and incl alkali resistence primer over and incl 1mm thick wall care putty complete all as specified and direcected
35100
-
-
... More
M&L for applying two coats of oil bound destemper over and incl a coat of alkali resistance primer over and incl 1 mm thick wall care putty including preperation of new walls surface all as specified and directed
37800
-
-
... More
M&L for one coat of oil bound distamper on celling of old surfaces including prepration by complete removal of existing treatment by scraping down with mechanical or manual means and providing 1mm plater of paris putty over plaster surface all as specified and directed
28890
-
-
... More
M&L for three coats of whitewash on new plastered wall surfaces including preparation of surfaces all as specified and directed by the Engineer in charge.
10800
-
-
... More
M&L for two coats of whitewash on old plastered wall surfaces including preparation of surfaces all as specified and directed by the Engineer in charge.
10800
-
-
... More
M&L for two coats of whitewash on old plastered celling surfaces including preparation of surfaces all as specified and directed by the Engineer in charge.
8694
-
-
... More
M&L for preparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
6089
-
-
... More
M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
5269
-
-
... More
M&L for rendering 5mm thick with ready mixed mortar having equivalent ratio on ceiling, rendering is tobe finished even andsmooth (without using extra lime or cement) complete all as specified and directed as per manufacturer instruction.
1620
-
-
... More
M&L for two coats of oil bound distamper on celling of new surfaces including prepration and providing and applying 1mm plater of paris putty to prepare the surface even and smooth over plaster surface all as specified and directed
1215
-
-
... More
M&L for two coats of whitewash on new plastered celling surfaces including preparation of surfaces all as specified and directed
405
-
-
... More
ROOF TREATMENT
-
-
-
... More
M & L for providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregates in roof parapet coping, roof kerb or mud slops and the like including weathering, slightly rounded or chamfered angles and throating as directed) complete including necessary form work complete all as specified and directed.
135
-
-
... More
Dismantling of brick tiles or terracing tiles single layer laid, bedded and pointed in any type/ any thickness of mortar on roof complete all as specified and directed.
18900
-
-
... More
Demolition of mud phuska in roofs, any thickness including plaster & leaping plaster including removing un serviceable material out side MOD land complete all as specified and directed.
3024
-
-
... More
M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone agg as in coping/Padding, kerbs,bed plates, benching incl weathering, slightly rounded or chamfered angle and throating including wire brushing & cleaning top surface of slab and complete preperation of roof slab for making it ready for application of APP membrain all as specified and directed.
981
-
-
... More
M&L 10 mm thick Plaster in CM 1:4 finished even & fair incld WPC @ 3% by weight of cement mixed complete all as specified and directed. (WPC will be measured & paid seperatly) NOTE: The plaster will be applied on the green concrete immidietaly after the PCC is done.
20682
-
-
... More
M&L for applying APP based polymeric water proofing membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) over a coat applying evenly a tack coat of industrial bitumen 85/25 @ 0.40Kg/Sqm over prepared roof surfaces with using butane gas torch ,forcing overlap 150mm at ends and 100 mm at sides and sealing complete all as specified and directed.
20682
-
-
... More
Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) 78, solar reflection 0.70 and initial emittance 0.75 on waterproof and sloped surface of terrace, laid over and incl 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner.
18900
-
-
... More
Supply only liquiud water proofing compound complete all as specified and directed.
10299
-
-
... More
M&L Cutting grooves in brick wall, 75mm wide and65mm deep and shaping horizontal face of groove with cement mortar 1:3complete all as specified and directed.
4971
-
-
... More
POST ATT AND CHEMICAL DPC
-
-
-
... More
M&L for Providing and injecting chemical emulsion for Post Constructional Anti termite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron
8640
-
-
... More
M&L for Providing and injecting chemical emulsion for Post Constructional Anti termite Treatmen of soil under existing floors/ pcc sub-base using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors
15120
-
-
... More
M&L for impregnating cream for injection into masonary or concrete wall 230mm thick against capilary rising humidity, rising bar super strong (Product No 201) of chowgale building chemicals or equivalent in pidilite/Dr Fixit/Sika/Fosroc complete all as specified and directed.
Method of application:Methodology
(a) The surface must be sound, absorbent, clean, free of dust, oil, paint, curing agents, loose cement or lime plaster & concrete, debrish, or any separation layers.
(b) The plaster must be knocked off at least 50 cm beyond the visibly penetrated area.
(c) Damaged mortar joints are to be scraped out to a depth of approximately 2-3cm. All sharp edge/joints need to be levelled, loose concrete to be removed.
(d) Drill boreholes at ground level horizontally, The boreholes are drilled horizontal into the masonary
3240
-
-
... More
UPGRADATION TO MAP SPECIFICATION
-
-
-
... More
Dismantling boarding, any description, fixed in any position with nails in Kitchen drawer, Cupboards etc
19116
-
-
... More
M&L for solid WPC (Wood Polimer Composite) sheet 18mm thick (water proof and termite proof) prelaminated one side with decorative choice colour and other side balancing white as in cup board shutter. The sheet shall be finished all edges with 0.5mm beading/ lipping of same lamination pvc sheet pasting or bonding tape etc complete all as per manufacture's instruction, specification and as directed.
15066
-
-
... More
M&L for solid WPC (Wood Polimer Composite) sheet 12mm thick (water proof and termite proof) prelaminated one side with decorative choice colour and other side balancing white as in cup board shutter. The sheet shall be finished all edges with 0.5mm beading/ lipping of same lamination pvc sheet pasting or bonding tape etc complete all as per manufacture's instruction, specification and as directed.
4050
-
-
... More
S&F Extruded aluminum alloy handles, fabricated type,anodised OF 75 mm complete all as specified and as directed.
8640
-
-
... More
Supply & Fixed stainless steel soft closing telescopic Drawer channel of 18 Inches grade, heavy duty, polishesd, fixed with screws to timber drawer complete as specified
1512
-
-
... More
M&L stainless steel 3D auto close concealed type hinges for kitchen cabinet/ cup board, etc., complete all as specified and directed.
22464
-
-
... More
S&F 4.8mm thick tinted sheet glass selected quality, in square, n exc 0.50sqm in each pane all as specified and directed.
530.5
-
-
... More
M&L for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm fixed to door / window (steel/wooden) including beading complete all as specified & directed.
2332.8
-
-
... More
Dismantling floor hearth or wall tiling incl cement mortar bedding, terrazo dado, (incl backing) removing services and tiles in any postion to store and rubbish off the premises complete all as specified and directed.
42012
-
-
... More
M&L for double charged vitrified ceramic coloured tiles 8 to 10 mm thick, dark shade (square/rectangular) polished, area of each tileexc 0.42 sqm but not exceeding 1.0 sqm, in floors/ skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. over & including 15 mm thick sceed bed in CM 1:6 comlete all as specified.
25345
-
-
... More
S&F Providing and fixing Powder coated with pure polyester coat of any shade (approved by GE) aluminum (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDMrubber/ neoprene gasket etc. aluminum sections shall be smooth, rust free, straight, mitred and jointed welded wherever required including cleat angle, aluminum snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and as directed. Outer Frame should be Aluminum welded. Following specifications of frame should be as below:-
(a) Outer Frame/ track (as per site requirement) of size 45mm x 130 mm x 1.1 mm thick of wt 1.50 kg/rm (approx), corner 45 degree cut aluminum welded.
(b) Vertical center mulion (rectangular pipe) of size 38mm x 25 mm x 1.2 mm thick of wt 0.40 Kg/rm (approx), welded with outer frame
(c) Outer Frame for Bathroom Windows of size 60mm x 114 mm x 1.10 mm thick of wt 1.25 kg/rm (approx), corner 45 degree cut aluminum welded.
(d) Horizontal Center Mulion for Bathroom Window of size 40 mm x 71.5 mm x 1.10 mm thick of wt 0.765 kg/rm (approx), welded with outer frame
Note: Window shall be installed with silicone complete all as specified and directed.
23040.12
-
-
... More
S&F Providing and fixing Powder coated with pure polyester coat of any shade (approved by GE) aluminum (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including 6 mm allen key bolt clamp for corner of shutter, one lock for each shutter, aluminum snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and as directed.
Following specifications of frame should be as below:-
(a) Corner cleat Mechanically jointed Shutter of size 65mm x 27 mm x 1.00 mm thick of wt 0.71 kg/rm (approx), 45 degree cut mechanically joint with 6 mm allen key bolt clamp
(b) Interlocking patty of size 28.6mm x 39.25 mm x 1.3 mm thick of wt 0.40 Kg/rm (approx)
24158.92
-
-
... More
S&F 4.8mm thick tinted sheet glass selected quality, in square, exc 0.50sqm in each pane all as specified and directed.
1341
-
-
... More
S&F 4.0mm thick frosted sheet glass selected quality, in square, exc 0.50sqm in each pane all as specified and directed.
400
-
-
... More
LEAKAGE/SEEPAGE OF KIT & TOILETS AND BAL ITEMS
-
-
-
... More
M&L for Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match,set jointed in neat cement slurry & pointed in coloured cement to match and including 15 mm thick screed bed in CM (1:6) complete all as spd and directed.
7645
-
-
... More
M&L for Glazed ceramic coloured tiles in vertical surface 350x250x7mm/ 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering as a backing coat in CM 1:4 on fair faces of brick work or concrete surfaces complete all as spd & directed.
18520
-
-
... More
M&L for 20mm thick black Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms, wash hand basing plaform and like with or without cement mortar (1:4) ncluding pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting holes for gas pipe, WHB and WHB mixer etc and including rounding exposed edges of granite incld taking down of existing granite and removing from MOD land complete all as specified.
1890
-
-
... More
Cleaning and grinding, wax polishing by machine on old/ new surface of Kota stone/granite stone surface to mirror finish as in daddo, riser, tread, floor etc to give high gloss finish complete all as specified.
7236
-
-
... More
M&L for 25mm thick cement concrete 1:2:4 type B0 (using 12.50mm graded stone aggregate as in floor sub floor, sub base, floor finishs etc.
2700
-
-
... More
Taking up or down old PE AL PE water tubing and connections any size/ dia and any position concealed or open fixed to wall, floor, ceiling or trenches all as specified and directed.
26460
-
-
... More
S&F 20mm outer dia CPVC pipes SDR 11 with and including Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
9990
-
-
... More
S&F 25mm outer dia CPVC pipes SDR 11 with and including Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
Note: supporting platform of pipeline on the roof surface will be made and rates inclusive in this item
5022
-
-
... More
S&F 40mm outer dia CPVC pipes SDR 11 with and including Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
Note: supporting platform of pipeline on the roof surface will be made and rates inclusive in this item
3996
-
-
... More
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and
cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 20 cm girth on brick wall complete all as specified and directed.
9990
-
-
... More
S&F 40mm outer dia CPVC Union complete all as specified and directed.
216
-
-
... More
S&F 25mm outer dia CPVC Union complete all as specified and directed.
1512
-
-
... More
S&F 20mm outer dia CPVC Union complete all as specified and directed.
1512
-
-
... More
S&F 40mm outer dia CPVC Tank Adaptor complete all as specified and directed.
216
-
-
... More
S&F 40mm outer dia CPVC ball valve/gate valve complete all as specified and directed
432
-
-
... More
S&F 25mm outer dia CPVC ball valve/gate valve complete all as specified and directed
648
-
-
... More
S&F 20mm outer dia CPVC ball valve/gate valve complete all as specified and directed
216
-
-
... More
S&F 20mm outer dia CPVC Brass Elbow complete all as specified and directed
1404
-
-
... More
S&F 20mm outer dia CPVC Male Brass Threaded Adapter (MTA/BTA) complete all as specified and directed
2592
-
-
... More
S&F 20mm outer dia CPVC Brass Tee complete all as specified and directed
1296
-
-
... More
Dismantling water tanks and S&F 500 Litres tripple layered rotational moulded polyethylene water storage tanks white coloured with cover of white colour ISI mark (cylindrical vertical with closed top tripple layer) hoisted and fixed in position all as specified in SSR Part-I.
216
-
-
... More
Dismantling water tanks and S&F 1000 Litres tripple layered rotational moulded polyethylene water storage tanks white coloured with cover of white colour ISI mark (cylindrical vertical with closed top tripple layer) hoisted and fixed in position all as specified in SSR Part-I.
216
-
-
... More
Supply & fix 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball (Min wt 210 gms)
432
-
-
... More
Supply and fix in repair Brass CP Wall mixer non telephonic type for mixing hot & cold water for Shower screwed down for 15mm bore iron pipe or ferrul complete all as specified and directed.
648
-
-
... More
Supply and fix Brass CP vertical centre hole basin mixer for mixing hot & cold water for Wash Hand Basin screwed down for 15mm bore iron pipe or ferrul including CP connection pipe complete all as specified and directed.
648
-
-
... More
Supply and fix in repair Brass CP sink mixer swivel spout for mixing hot & cold water for Sink screwed down for 15mm bore iron pipe or ferrul complete all as specified and directed.
216
-
-
... More
S&F in repair 15mm bore Stop valves/angle valve cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified.
3672
-
-
... More
S&F in repair 15mm bore 2 way bib cock, cast copper alloy, fancy type, chromium plated with long shank and cup screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified.
648
-
-
... More
S&F in repair 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified
216
-
-
... More
S&F in repair 15 mm bore Bib taps long body, brass chromium plated, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified
1080
-
-
... More
S&F in repair cast copper alloy, chromium plated Health faucet 15 mm dia with brass handle and tube 1 to 1.25 mtr long complete as specified & directed
648
-
-
... More
S&F in repair CP over head shower rose 150 mm dia with arm moving arrangement complete all as specified & directed.
648
-
-
... More
S&F in repair for 32mm Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified
648
-
-
... More
M&L in repair for 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified
648
-
-
... More
Supply and fix in repair brass chromium soap dish approx size 160x160x90mm any type fixed to plugs with CP brass screw complete all as specified complete all as specified.
648
-
-
... More
Supply and fix in repair brass chromium plated toilet paper holder standard size any type fixed to plugs with CP brass screwcomplete all as specified.
648
-
-
... More
Supply and fix in repair brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified.
648
-
-
... More
Supply and fix in repair brass chromium plated towel ring size 10mm dia pipe and, 150mm round type complete all as specified.
648
-
-
... More
S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified.
648
-
-
... More
S&F plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device of approved colour and as per existing model all as specified & directed by Engr-in-Charge
648
-
-
... More
S & F in repairs PVC valveless, syphonic action type flushing cistern 10 ltr capacity low level white or coloured with inlet, ball valve float and handle including brackets and flush pipe fixed with water closset, complete all as specified.
864
-
-
... More
S&F in repairs 600mmx450mm bevelled edge looking mirror 5mm thick of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified.
648
-
-
... More
S&F in repairs 1050mmx600mm bevelled edge looking mirror 5mm thick of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified.
216
-
-
... More
S&F in repairs PVC connection 600mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified.
3456
-
-
... More
S/F in repair viterous china squatting pan 'ORISSA Pattern' size 580x440mm white with integral foot rests) (excluding flushing cistern & flush pipe) including connecting to trap and to flushing pipe, anti syphonage pipe etc complete including making good to surface all as specificed and directed.
216
-
-
... More
S&F in repair vitreous china white wash hand basin flat back of size 550 x 400 mm including CI/MS brackets including cutting for and pinning in ends of brackets but including waste pipe all as directed.
648
-
-
... More
S&F in repair Vitreous China wash basin, white, Oval shape, under countered size as per existing model 480X560X 150 mm including coupling, waste pipe fix in granite top complete as specified and directed
216
-
-
... More
S&F in repair vitreous China wash down water closet pan (pedestal pattern), european type white and connection with flush pipe complete all as specified.
648
-
-
... More
S&F in repairs stainless steel sink with drainage board made out of 1 mm thick sheet 304 steel grade for kitchen with plug , washer and wates, including bedding in cement morter to dwarf wall or including fixcing cantilever brackets and connecting union to pipe overall size 915 X460 mm of bowl size 410mm x330mm x203mm etc complete all as specified and directed
216
-
-
... More
S&F in repair stainless steel sink, 1.00mm thick sheet 304 steel grade for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.
216
-
-
... More
S/F in repairs silver shine stainless steel kitchen plate rack 1 mm thick 304 steel grade of over all size 24x30x10 inch of approved make and design including complete all as specificed and directed.
216
-
-
... More
S&F 110mm PVC SWR bends (any radius ) complete all as specified
1836
-
-
... More
S&F 75mm PVC (SWR) vent cowl complete all as specified
972
-
-
... More
S&F 110mm PVC (SWR) 'P' trap complete all as specified
432
-
-
... More
S&F 110 mm bore PVC (SWR) junction single Tee with access door,equal or unequal complete all as specified
972
-
-
... More
S&F 110 mm to 75 mm PVC(SWR) reducer complete all as specified
972
-
-
... More
S&F PVC half bend 63mm complete all as specified
108
-
-
... More
S&F PVC single Y 63mm complete all as specified
108
-
-
... More
S&F PVC socket 63mm complete all as specified
1728
-
-
... More
S&F PVC pipe 63mm complete all as specified
216
-
-
... More
S&F stainless steel Grating doom (With/without hole) 5 INCH dia complete all as specified and directed
870
-
-
... More
S&F PVC nahani trap(floor trap) 110x63mm plain with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) all as specified and directed.
1296
-
-
... More
S&F in repair 40mm bore Unplasticized PVC PIPES (UPVC) including fittings sealing with adhesive into CI pipe by making suitable hole into CI pipe fixed complete to walls, ceilings or in floors etc complete all as specified and directed.
4428
-
-
... More
S&F in repair 50mm bore Unplasticized PVC PIPES (UPVC) including fittings sealing with adhesive into CI pipe by making suitable hole into CI pipe fixed complete to walls, ceilings or in floors etc complete all as specified and directed.
5400
-
-
... More
S&F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified
2376
-
-
... More
S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified
6210
-
-
... More
S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified
5778
-
-
... More
S&F 75mm bore PVC (SWR) bends any radius
216
-
-
... More
S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal
108
-
-
... More
S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal
864
-
-
... More
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.
5700
-
-
... More
S&F Stainless Steel 202 grade round bar for safety grill in window/ ventilator welded at both ends with 6 mm SS 202 grade round bar fixed to aluminum frame incl cutting of holes of appropriate size in frame and incl 45 micron aluminum powder coating for smooth finish to match aluminum window complete all as specified and directed.
31790.56
-
-
... More
S&F 1mm thick Mild steel, plain, black sheet in wall clading, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specificed and directed.
540
-
-
... More
S&F MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate fixed with angle frame with flat iron 40x3 mm size 75 cm long with necessary bolts, etc. complete complete all as specified & directed by Engr-in-Charge.
1080
-
-
... More
S&F Anodised aluminum snap grid of size 605mm x 605 mm including 4mm thick non asbestos fibre cement board including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long
and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified
648
-
-
... More
S&F Mild steel work in Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. (Fe-290 Gde-165E) complete all as specified and directed.
13500
-
-
... More
Demolition of Reinforced Concrete Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work .
25
-
-
... More
M & L for Brickwork with subclass ‘A’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specifed.
972
-
-
... More
M&L for Reinforced Cement Concrete 1:2:4 type B1 using 20mm graded stone aggregate as in chajjas and the like. complete all as specifed.
25
-
-
... More
Formwork to chullah hoods, chajjas,and similar items including edges and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specifed.
324
-
-
... More
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
2484
-
-
... More
S&F in repair 25mm dia curtain rod, stainless steel, chromium plated with fixing brackets, rod side bulb (02 pcs each) , stops, rollers etc, length of each rod not exc 1.80m. Complete all as specified and directed.
7560
-
-
... More
S&F for 25mm thick (measured solid) precast cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate and set in cement mortar 1:4 as in louvres and jallies, including all mouldings and frame work.
486
-
-
... More
Demolition of cement concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)
131
-
-
... More
M&L for 50mm thick PCC 1:3:6 type C1 using 20mm graded stone aggregate finished even and fair incl dummy joint 50x10mm filled with joint sealing compound grade A at 3 mtr as in plinth protection.
1749
-
-
... More
M&L for roof trusses Fe 410-W(Gde-E- 250) quality 'A' (framed), trussed,purlins, crane gantries,rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. ® complete all as specified and directed.
18750
-
-
... More
M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa and min 180 gsm as in roof covering/cladding to wall, fixed with self tapping screws as specified.
2801
-
-
... More
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. in hard/dense soil n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed.
216
-
-
... More
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed
162
-
-
... More
Removing excavated material exc. 50m and n exc 100m and depositing where directed at a level n exc. 1.5 m above the starting point complete
54
-
-
... More
S&F of MS chicken wiremesh wire dia 0.6 to 2 mm complete all as specified and directed.
7171
-
-
... More
Machine cut kota stone (min size of 550 mm x 550 mm for floor and full size of step/riser for staircase) slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15mm thick screed bedding in CM 1:6 and dismantling existing broken kota stone flooring
1620
-
-
... More
S&F PVC (SWR) junction single Tee ,110x63 mm equal or unequal complete all as specified
324
-
-
... More
Taking down eaves gutters and rainwater pipes (CI/PVC) (any size/dia or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)
14364
-
-
... More
JOINERY WORK
-
-
-
... More
Taking down steel Door/window/ventilators with guard bars (without taking off shutters from frames) area n.exc 1.5 sqm each and making good disturbed surface complete all as specified & directed.
3456
-
-
... More
Taking down chowkhats or frames with shutters/ window/ventilators(without taking off shutters from frames) area exc 1.5 sqm but n.exc. 4.00 sqm each and making good disturbed surface complete all as specified & directed. Note: some qty shutter refixed as per sr itenm no 5
3888
-
-
... More
S&F factory made single extruded WPC (wood polymer composite) solid door frame of size 65x125mm (having double rebate of size 35 mm) comprising of virgin PVC polymer of K value 58-60 (suspension grade) calcium carbonate and natural fiber (wood powder/ rice husk/ wheat husk) and non toxic additives (max toxicity index of 12 for 100gms) fabricated with mitred joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having min frame density of 750 kg/cum, screw withdrawl strength of 2200 N (face) 1100n (edge) min compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant, and including material & fixing in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed.
5616
-
-
... More
S&F factory made single extruded WPC (wood polymer composite) solid door frame of size 50mmx100mm (having single rebate of size 35 mm) comprising of virgin PVC polymer of K value 58-60 (suspension grade) calcium carbonate and natural fiber (wood powder/ rice husk/ wheat husk) and non toxic additives (max toxicity index of 12 for 100gms) fabricated with mitred joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having min frame density of 750 kg/cum, screw withdrawl strength of 2200 N (face) 1100n (edge) min compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant, and including material & fixing in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed.
6480
-
-
... More
Refixing of shutters area exc 1.5 sqm but n.exc. 4.00 sqm each complete all as specified & directed. Note: Good condition shutter obtained from sr item no 2 above
2592
-
-
... More
M&L 35mm thick factory made flush shutter solid core construction with blosk board core and plywood face panels commercial type on both side including with lipping/frame to match complete all as specified and directed.
1647.22
-
-
... More
S&F Providing 35mm thick FACTORY MADE B/S PRELAM WIRE MESH SOLID PVC DOOR SHUTTER consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles and 15mm x 15mm for top, lock & bottom rails. M.S. frame shall have a coat of metal primer of approved make and manufacturer. 19mm x 19mm M.S. square tubes shall be covered with heat moulded Prelam sheet 'C' channel made from 5mm (±0.25) thick PVC Sheet of Density 600 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, of size 35mm thickness, 115mm width out of which 100mm shall be flat and 15mm shall be bent in 90° angle on either side forming stiles,one of the 90° bend edge is cut from stiles as well as rails to nail from inner side of door to hide wire mesh fixing steel screws. 5mm (±0.25) thick 140mm wide PVC sheet out of which 125mm shall be flat and 15mm shall be bent in 90° on the inner side to form top and bottom rail and 155 mm wide PVC sheet out of which 100 mm shall be flat and 15mm shall be bent in 90° on both side to form lock rail. An additional 5mm (±0.25) thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent cement adhesive. Panel will be of GI /SS wire mesh of 24 gauge to be fitted inside area of stiles & rails. The wire mesh in top, bottom & lock rail is sealed with 15mm x15mm tube with steel screw of size 13/6 mm.10mm (5mm x 2nos) thick PVC strip of 25mm width is to be stuck & nails on both side of G.I. wire mesh interior at the top, bottom & lock rail. 10mm thick (5mm x 2nos) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardware’s should be fixed with 19*6mm size steel screws etc. Complete all as specified and directed/ manufacturer's specification & drawings.
1647.22
-
-
... More
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm (having single rebate of size 30 mm)comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and including material & fixing in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed.
5346
-
-
... More
S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.
1483.38
-
-
... More
S&F 100mm size mild steel medium weight butt hinges fixed complete all as specified and directed
6966
-
-
... More
S&F 300mm aluminum alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminum alloy and fixed complete all as specified & directed.
3456
-
-
... More
S&F 100mm size but hinges aluminum alloy with galvanised mild steel hinge pin type B1 complete all as specified and directed
3240
-
-
... More
M&L for preparation of new steel or iron surfaces over 10cm width or girth of any description and applying two coats of synthetic enamel paint over and incl a coat of red oxide primer complete all as specified & directed.
8550
-
-
... More
M&L for preparation of new wooden surfaces over 10cm width or girth of any description and applying two coats of synthetic enamel paint over and incl a coat of pink primer complete all as specified & directed.
5929
-
-
... More
S&F for floor door stopper of aluminum alloy body and tongue anodised with hard drawn steel spring Overall length of cover plate 140 mm all as specified & directed by Engr-in-Charge.
2592
-
-
... More
S&F 150mm long aluminum anodised barrel tower bolt of extruded section complete all as specified & directed.
8856
-
-
... More
S&F 150mm long extruded aluminum handles, cast type, anodised complete all as specified & directed.
8640
-
-
... More
S&F in repair mortice lock vertical type 100 mm size MS four lever all as specified and directed
216
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%