Get tender documents at just ₹200 per tenderKnow More
Search made simple for latest tendersNo hidden charges. No keyword restrictionsExplore Our Plansor Pay Per Tender

Irrigation And Flood Control Department

Delhi, Delhi

  • Opening Date

    10 Sep 2019

  • Closing Date

    21 Sep 2019

  • Tender Amount

    ₹ 14,34,706

  • EMD

    ₹ 28,694

Summary

Providing And Fixing Open Gym Equipments In C-block Park South Ganesh Nagar In Laxmi Nagar Assembly Constituency Ac -58.

BOQ Items
ItemQuantityUnitsRateAmount
... more
Demolishing R.C.C.work manually/ by mechanical means including stacking of steel bars and disposal of unsreviceble material within 50 metres lead as per direction of Engineer-in-charge.
1cum1454.55 1454.55
... more
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
3cum5012.6505 15037.9515
... more
Arm wheel: Providing, de signing and fixing of arm wheel in a pair of size 850 x 800 x 1800 mm fabricated with main post of ‘C’ Class GI Pipe and minimum 114mm dia and other pipes of 32mm dia and joints scalloped as necessary and dressed off re moving sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Pedals shall be ma de up of Nylon alloy with rounded edges to prevent any impact or injury and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 4.00mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free,duly oil sealed and self lubricate d made by reputed company to be approved by Engineer-incharge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to beclosed by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J- shape welded bolts made of 18mm galvanized rod and once the concrete is set, fix the equipments on to it and cover with the base plate. All complete as per direction and approval of Engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base plate and fixing of equipments etc. (the cement concrete and excavation work shall be paid separately).
1Each69000 69000
... more
Demolishing brick work manually/ by mechanical means including stacking of serviceble material and disposal of unserviceble material within 50 metres lead as per direction of Engineer-in-charge. : In cement mortar.
1cum842.7506 842.7506
... more
Elliptical exerciser: Providing, designing and fixing elliptical exerciser of size 1200 x 540 x 1600 mm fabricated with main post of ‘C’ Class GI Pipe and minimum 114mm dia and other pipes of 32mm dia and joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 4.00 mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in-charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J-shape welded bolts made of 18mm galvanized rod and once the concrete is set, fix the equipments on to it and cover with the base plate. All complete as per direction and approval of Engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base plate and fixing of equipments etc (the cement concrete and excavation work shall be paid separately).
1Each77050 77050
... more
Exercising bar: Providing, designing and fixing of exercising bar in a pair of size 1800 x 550 x 1700 mm fabricated with main post of ‘C’ Class GI Pipe and minimum 114mmdia and other pipes of 32mm dia and joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 4.00mm, colorful and UV resistant and environmental friendly. All open ends of pipe to be closed by GI/ LLDPE caps for user safety.The equipment to be fixed on ground with concrete of minimum strength M25 and J shape welded bolts made of 18mm galvanized rod and once the concrete is set, fix the equipment on to it and cover with the base plate. All complete as per direction and approval of Engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal and fixing of equipments etc. (the cement concrete and excavation work shall be paid separately).
1Each63250 63250
... more
Providing & fixing of rubber tile flooring 25 mm thick made of SBR (Styrene Butadiemce Rubber) fixed with adhesive all complete as size & make approved by the Engineer-in-charge.
101Sqm2863.508 289214.30799999996
... more
Submission of 3rd party Quality control inspection report. The thirty party quality control check will be carryout by any one agency i.e CRRI,IIT Delhi, Delhi college of Engineering, EIL, WAPCOS, JAMIA ISLAMIA University and Ch. Brahm Prakash Govt. Engineering College Delhi or by any other agency approved by Engineer-in-charge . Note :- payment to the third party will be made by contractor which will be reimburesed by the department after satisfactory completion of work. The payment to the third party in any case shall not be more than 1% of total tendered amount of Item No. 1 to 22.
1Job14205 14205
... more
Providing, designing and fixing of Air Walker of size 1100 x 550 x 1480mm fabricated with main post of ‘C ‘Class GI Pipe and minimum 114mm dia and other pipes of 32mm dia and joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. Base plate cover shall be made of virgin LLDPE plastic by rotational molding with minimum 4.00mm thickness, U V resistant and color as approved by Engineer in charge. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury.Maintenance free bearings should be used in the equipment manufactured by reputed company duly oil sealed and self lubricated to be approved by Engineer-in-charge. The equipment shall be fitted with inbuilt limiters. The equipment shall be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts made of 18mm galvanized rod and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc (the cement concrete and excavation work shall be paid separately).
1Each69000 69000
... more
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size).
13cum4927 64051
... more
Seated chest press: Providing, designing and fixing of seated chest press in a pair of size 1800 x 700 x 2000 mm fabricated with main post of ‘ C’ Class GI Pipe and minimum 114 mm dia and other pipes of 32mm dia and joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury. Seats and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 4.00 mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolt made of 18mm galvanized rod and once the concrete is set, fix the equipment on to it and cover with the base plate. All complete as per direction and approval of Engineer-in-charge regarding material, shape of equipment,colour on metal, seat and base plate and fixing of equipments etc. (the cement concrete and excavation work shall be paid separately)
1Each114425 114425
... more
Earth work in excavation by mechanical means(Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan)including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.
40cum125.9505 5038.02
... more
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
252kg85.95055 21659.538600000003
... more
Leg Press: Providing, designing and fixing of leg press of size 2000 x 550 x 1 600 mm fabricated with main post of ‘C’ Class GI Pipe and minimum 114 mm dia and other pipes of 32mm dia and joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing.Handle bars to be provided with high quality grip rubber on top end. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact of injury. Seat to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 4.00 mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movements. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shape welded bolts Made of 18mm galvanized rod and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of Engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc (the cement concrete and excavation work shall be paid separately).
1Each92000 92000
... more
12 mm cement plaster of mix : 1:6 (1 cement :6 fine sand).
10sqm160.3505 1603.505
... more
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
34cum5924.6505 201438.117
... more
Pull chair: Providing, designing and fixing of pull chair in a pair of size 2500 x 800 x 2000 mm fabricated with main post of ‘C’ Class GI Pipe and minimum 114mm dia and other pipes of 32mm dia and joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber on top end. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury seat to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 4.00mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shape welded bolt made of 18mm galvanized rod and once the concrete is set, fix the equipment on to it and cover with the base plate. All complete as per direction and approval of Engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc(the cement concrete and excavation work shall be paid separately).
1Each114425 114425
... more
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
4sqm78.404 313.616
... more
Brick work with common burnt clay F.P.S.(non-modular) bricks of class designation 75 in foundation and plinth in: cement mortar 1:6 (1cement: 6 coarse sand).
1cum4751.6505 4751.6505
... more
Horse rider station: Providing, designing and fixing of horse rider station of size 1000 x 600 x1100 mm fabricated with main post of ‘C’ Class GI Pipe and minimum 114 mm dia and other pipes of 32mm dia and joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact of injury. Seat to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 4.00 mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shape welded bolt made of 18mm galvanized rod and once the concrete is set, fix the equipment on to it and cover with the base plate.All complete as per direction and approval of Engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate cover and fixing of equipments etc. (the cement concrete and excavation work shall be paid separately).
1Each65550 65550
... more
Air Swing: Providing, designing and fixing of air swinging pair of size 1150 x 900 x 1250 mm fabricated with main post of ‘C’ Class GI Pipe and minimum 114mm dia and other pipes of 32mm dia and joints scalloped as necessary and dressed off removing sharp edges and burrs.Zinc primer paint to be applied at all welding points prior to finishing.Pedals shall be made of Nylon alloy with rounded edges to prevent any impact of injury and seat to be made from virgin LLD PE manufactured by rotational moulding with minimum thickness of plastic of 4.00 mm, colorful and UV resistant and environment all friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with in built limiters to prevent unwanted movements. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J-shape welded bolts made of 18mm galvanized rod and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of Engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc. (the cement concrete and excavation work shall be paid separately).
1Each74750 74750
... more
Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by amming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. All kinds of soil.
17Each52.6505 895.0585
... more
Providing, designing and fixing of stair stepper in a combination of pair and a single step of size 1000 x 800 x 14 00 mm fabricated with main post of ‘C’ Class GI Pipe and minimum 114 mm dia and other pipes of 32mm dia and joints scalloped as necessary and dressed off removing sharp edges and burrs.Zinc primer paint to be applied at all welding points prior to finishing Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact of injury and seat to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 4.00mm, colorful and UV resistant and environmental friendly.Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movements. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shape welded bolt made of 18mm galvanized rod and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of Engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc. (the cement concrete and excavation work shall be paid separately).
1Each74750 74750

P.W.D.-6 E-Tendering GOVERNMENT OF NCT OF DELHI IRRIGATION and FLOOD CONTROL DEPARTMENT NOTICE INVITING TENDER Item Rate / Percentage rate bids / tenders are invited on behalf of the President of India from approved and eligible contractors of Irrigation and Flood Control Deptt. only for the work of Providing & fixing open Gym equipments in C-Block Park South Ganesh Nagar in Laxmi Nagar Assembly Constituency AC -58. (MH :- MLALAD FUND) 1. Item Rate / Percentage rate bids / tenders are invited on behalf of the President of India from approved and eligible contractors of Irrigation and Flood Control Deptt. Govt. of NCT of Delhi and the contractor who are registered with other department and now got their registration verified from the I&FC Deptt. are also eligible for participation of tender. They shall also submit the verification certificate at the time of opening of bids / tenders. The enlistment of the contractors should be valid on the last date of submission of bids/tenders. In case the last date of submission of bid / tender is extended, the enlistment of contractor should be valid on the original date of submission of bids /tenders. 1.1 The work is estimated to cost Rs. 14,34,706/- This estimate, however, is given merely as a rough guide. 1.1.1 The authority competent to approve NIT for the combined cost and belonging to the major discipline will consolidate NITs for calling the bids / tenders. He will also nominate Division which will deal with all matters relating to the invitation of bids/ tenders. 1.1.2 The eligible contractor shall quote his rates / percentage (minus or plus) in the schedule of quantities attached to the tender documents available on e-procurement portal https:/govtprocurement.delhi.gov.in. Contractors of appropriate class can quote their rates/percentage (minus or plus) through e- procurement platform only provided he has definite proof from the appropriate authority, which shall be to the satisfaction of the competent authority, of having satisfactorily completed similar works of magnitude specified below :- 1.2 Criteria of eligibility for submission of bid/ tender documents. 1.2.1 Condition for Non-I&FC contractors only, if bids/tenders are also open to non I&FC contractors. For works estimated cost upto Rs. 20 Crore. Three similar works each of value not less than Rs. 00.00 Lakh or two similar work each of value not less than Rs 00.00 Lakh or one work of value not less than Rs. 00.00 Lakh (all figures rounded to nearest Rs. 10 lacs) in last 7 years ending previous day of last date of submission of bid/ tender. I&FC registered contractors are exempted from the conditions as explained under 1.2.1. Note:- For works costing above Rs. 5 Crore but up to Rs. 20 Crore, when bids / tenders are open to non-I&FC contractors also, then Class-II contractors of I&FC shall also be eligible if they satisfy the eligibility criteria specified in 1.2.1 above Similar work means :- contractor who have successfully completed the original works of similar nature 1.2.2 Criteria of eligibility for I&FC as well as non- I&FC contractors. Note :- For works estimated to cost above Rs. 20 Crore. Three similar works each of value not less than Rs.____ Lacs or two similar work each of value not less than Rs.______ Lacs or one similar work of value not less than Rs. _______ Lacs (all figures rounded to nearest Rs.10 lacs) in last 7 years ending previous day of last date of submission of bid/ tender. The value of executed works shall be brought to current costing level by enhancing the actual value of work at simple rate of 7% per annum, calculated from the date of completion to the last date of submission of bid/ tender. To become eligible for issue of bid / tender, the tenderer shall have to furnish an affidavit as under :- I/We undertake and confirm

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.