Delhi Development Authority Tender

Providing Blacksmith (skilled category) for RBT fencing repairs in the park, all complete as per directions of Engineer-in-Charge.

Providing Bhisthi/Mate (Semi-skilled category) to assist the Mason and other miscellaneous works, all complete as per directions of Engineer-in-Charge.

Providing Beldar (un-skilled category) to assist the Mason and other miscellaneous works, all complete as per directions of Engineer-in-Charge.

Supplying and stacking at site. Factory made Precast C&D Waste concrete block.

Supplying and stacking at site.Cement OPC-43 Grade.

Supplying and stacking at site.Coarse sand (zone III) .

Supplying and stacking at site.Fine sand (zone IV).

Supplying and stacking at site.Stone Aggregate (Single size) : 20 mm nominal size.

Supplying and stacking at site. Synthetic enamel paint of approved brand. (Asian/Nerolac/Berger)

Supplying and stacking at site. AAC Block

Supplying and stacking at site. Bricks. Common brunt clay F.P.S. (non modular) bricks class designation 7.5

Hiring and deployment of Hydraulic Excavator (3D) with driver and fuel all complete as per direction of Engineer-in-charge.

Hiring and deployment of Tractor with trolley with driver and fuel all complete as per direction of Engineer-in-charge.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 4 mm thick ACP sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.(Structural frame work including M.S/S.S plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). a) Overhead informatory signage

Supplying and stacking at site. RBT reinforced barbed wire.

Supplying and stacking at site. Interlocking C.C. paver block { 60 mm thick, M-30) (including carriage).

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Supplying and stacking at site.Moorum

Supplying, stacking and Spreading 6 mm thick red bajri, watering and rolling complete including preparation of the surface and rolling. (a) With road roller/ hand roller

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall (a) 20 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (FINOLEX/SUPREME/PRINCE) External work (a) 50 mm nominal dia Pipes

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading,transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Note: 1) Contractor shall follow the relevant NGT, DPCC orders, and or any other govt. authority enforcing environmental and pollution control orders and if any fine/penalty/challan is imposed by any government agency, the cost of the same shall be solely borne by the contractor. 2) If the agency fails to provide the manpower as mentioned in schedule item no. 1 to 6 then a penalty of Rs. 2000/- per person per day will be levied and the same will be recovered from running/final bill of the agency. The intimation for providing the manpower will be given minimum one day (24 Hours) prior to the period of requirement. 3) The work can be terminated at any time without giving any notice to the agency. 4) Refer Special Condition on page no. 145. 5) The water charges will be borne by contractor only.