Consumables Tenders

Details: Description:- 161010 Quick Cutting With Abrasive Rail Cutter Of All Types Of Rail Sections Including wear Resistant, Head Hardened Rails Up To 110 Uts, With Contractors Tools & Plants, Equipment, consumable With All Lead & Lift Etc. Complete As Directed By Engineer In-charge. Abrasive Rail Cutter will Be As Per Rdso Specification No. Tm/sm/1 (rev. 01 Of 2012) With Latest Status Of Rdso; Rail cutting Wheel Abrasive Disc Will Be As Per Rdso Specification No.tm/sm/2 (rev. 01 Of 2020) A) 161016 : Out Side Track -52 Kg - 90 Uts

Details: Description:- Clearing Of Tracks Including Cess/slopes Etc. Up To Railway Boundary On Either Side along The Track Running Meter By Removing /picking Up All Muck, Garbage, Plastic & Paper Waste strewn And Other Materials Such As Glass / Plastic Water Bottles, Tea Cups, Plastic Cover Bags, Dead animals, Grass Etc. And Disposing The Same Away From The Railway Limit Without Disturbing The Cess, ballast, Track & Track Fitting Sets. With All Contractor's Materials , Labour, Transportation, Tools & plants,lead & Lift, Consumables, Loading & Unloading Etc. With All Contractors Own Safety, Risk And Cost ofalllabourworkingintherunningtrackandaspertheinstructionsofengineer-in-charge. conditions: A) The Track Should Be Kept Clean. B) The Clearing Work Should Be Done Under Running condition Of Trains . No Block Will Be Provided By The Railways. C) Before Commencement Of The Work, the Staff Should Report To The Concerned Section Engineer I.e Sse/p.way Or Sse/works And Take permission /endorsement In Daily Field Books . D) While On Duty Proper Authority Letter/ Indent Card should Be Carry To Avoid Complication During Inspection By The Higher Officials. E) No Track Materials should Be Removed /carried From The Track. F) Safety Of The Men Who Working On The Track And surrounds Rest With Contractors. No Compensation Will Be Made By The Railway To The Staff Who Met with Anaccidents During Work. G) Track Running Metre Means Length Along The Track Up To The Railway boundary On Both Up & Down Line Sides .

Details: Engagement Of User Fee Agency Through E-tender At Pandane Toll Plaza Located At km 132+250 For The Project Of Rehabilitation / Upgradation Of Existing Km. 98.750 (design Ch. 121+500) & From Existing Km. 78+050 (design Ch. 142/500) to Pimpalgaon Baswant Existing Km. 59+100 (design Ch. 161+281) To Two Lane with Paved Shoulders & Strengthening Of Existing Km. 83+690 To Existing Km. 78+050 In The State Of Maharashtra On Epc Basis (sarad-vani-pimpalgaon-nh 953) and Upkeep/maintenance Of Adjacent Toilet Blocks Including Recouping The consumable Items.

Description: CATEGORY: Arduino Mega , Arduino Uno , Respberry Pi 4 , Pi Display , Pi camera , BMS , NodeMCU , ESP32 CAM Development Board , Power Router , BeagleBone AI for Artificial Intelligence based applications , Peripheral Sets for Arduino or NodeMCU or Raspberry Pi , Oscilloscopes , Function Generator , Benchtop Multimeter , Non contact Voltage tester , Micrometer , Vernier Calliper Digital , Electronic Component Repository , Hot Air Gun , Air Compressor silent , LED String Light Making Machine , Circular saw , Bench drill machine , Bench drill machine Magnetic , Hand drill machine , Impact Drill , Pnumatic Drill Machine , Jigsaw Machines , Bench Grinder , Chopsaw , Table Saw , Laser cutting machine , Printer Vinyl cutter , Angle Grinder , Printer laser , Screwdriver set Powered , Wood Lathe , Mini Desktop Lathe cum Milling , Scroll Saw Machine , Dremel Cordless Rotary Tool , Belt and Disc Sanding Machine , Coil Winding Machine Motorized , Nail machine , PCB Power Drilling Machine , Advanced Motorized Sewing Machine , Sheet cutter for power tools , Variavle voltage Power Supply , Power Adopters , Multiple Adopter , Smart AC Plug , Conference Speaker , Sheet Cissor , Sheet cutter for machining and fabrication tools , Screwdriver set , Tool Wall Covering Perforator , End Cutting Mini Plier , Multi purpose Bent Nose Plier , Ratchet Clamp , Needle Files , Pipe Vice , Dremel Multi tool kit , Revet Gun , Electric Rivet Insert Nut Gun Cordless Riveting Drill Adaptor Tool , Adjustable spanner , Micor Chisel Set , Baby Vice , Anvil , Wire stripper , Linesmans Pliers , Cutting Pliers , Fencing Pliers , Ironworker Pliers Rebar Pliers , Locking Pliers , Ring spanner , Socket spanner , Hook spanner , Radium Cutter Knives , Spirit Level , Tap and die set , Height gauge , Magnifying Glass with Stand 2 No , Digital Microscope , Digital Telescope , Measuring Tape , Measuring tape digital , techometer , Glass Cutter , Allen key , Tri square , Electric clamp meter , multimeter , Weighing scales , Welding consumables , Rust remover spray , Acrylic Sheets , Foam Sheets , Aluminum Channels , PCB Drill Bits , 3D Printer Filament , Thinner , PU Paint , PU Primer , Wires , Pneumatic Pipes , Pneumatic Fittings , Drill Bit set , Revet , Gypsum , C Clamp , Microware Portable scan , 3D Scanner CNC , Exhaust portable , Slide changer , Carpentry Boring Bits , USB Cables , LAN Cables , 9V Batteries , Tin Cutter With Spring , Cutting Mats , Laser distance measurer , Flashlights , Gas Welding , Adjustablet wrench head , Trolley , Card machine , Rechargeable Lithium Ion Battery , Hot Air Blower With Soldering Iron , Shouldering Rod , Clothes Iron , Lithium Battery Spot Welding Machine , Tool bins Plastic with metal brackets , Vacuum Cleaner , Robotic Vacuum Cleaner , Filament Dehydrator dry cabinet , Reflow Oven

Description: CATEGORY: Culture Plates , Glassware , Facility for Heating Slide , Anaerobic Apparatus , Autoclave , Analytical Balance , Biosafety Cabinet Type 2 A , BOD Incubator , Centrifuge , Co2 Incubator , Deep Freezer 20 Celcius,Deep Freezer , Distilled Water Plant , Elisa Reader with Washer , Hot Air Oven , Incubator , Lab Refrigertor , Laminar Flow , Micrometer eye Piece , Micrometer Stage , Micro with universal condenser counting oil emersio , PH Determination Apparatus , Serum Inspissator , VDRL Shaker , Vortex Mixer , Water Bath with Variable Tempreture , Oil Immersion lens , Colony Counter , Antibiotic Disc for Antibiotic Sensitivity Testing , Antibiotic Zone Scale , Antisera Salmanonella , Antisera Shigelladysenteriae , Antisera Shigellaflexnari , Antisera Shigelassoni , Antisera Vibrocollara , ATCC Strain - Enteruchus Faecalis 29213 , ATCC Strain -E.Coil 25922 , ATCC Strain E -Coil35218 , ATCC Strain -Pseudomonas Aeruginosa 27853 , ATCC Strain Staphylococcus Aureus 25923 , ATCC Strain -Pseudomonas Aeruginosa 29213 , Micropipette Multichannel , Micropipette Single channel Set of Three , Digital Thermometers of Different Tempreatures , minuse 80 SE Dip Freezer , Microcentrifuge , Personal Protective Equipment , Viral Transport Media Kit , All other Consumable kit as required for virology , Magnify Glass with Metal Handle , Metal Mincing Machine , Postmortem Intution Set Complete , Suction Machine Pump , Filetering Apparatus Seitz , Filter Ad Milliporse Filter Each , Disicator , vacuum Desicator , Apron Plastic for postmortem , Apron rubber for postmortem , Lyophilizer , UV Transilluminator with Photography , Cold Room Plus4 D C , Wheatex Mixer , Electric Balance , MicroCentrifuge , Ultra Centrifuge , Fluorescent , Drug Delivery System Dose Meter , Samples of Various Drug Formulations , Simulation Model For Demonstration of Route of Administration , Computer Assisted Learning lab , Anthromatic Set Including , Digital PH Meter , Digital Spectometer , Chemical Balance , Distillation Plant , Refrigerator , Slide warming Table , Hot Plate , Spectroscopy Lens With Adjustable Slit , Disussion Set Complete , Digital Bp Instrument , Stethoscope , Weighing Machine For Dead Body , Autopsy Table , Stryker Type Autopsy Saw With Accessories , Weighing machine For Fetus , Brain Knife , Hack Saw , Rib share Lift and Right , Measuring Tape , Magnifying Lens , Xray View Box , Tooth Extractor Left and Right , Hand Set Hit Sealer , Instrument Trolley , Reactal Thermometer , Portable Xray Machine

Description: BOQ ITEMS: DENSIMETER NO/NC 0.75MPA(ABS) GL316 1A2L , PRESSURE GAUGE -1 TO 9 BAR , SF6 GAS CYLINDER - 25 KG (AS PER IEC 60376), JOINT TORIQUE R12, BAGUE R21 NT1932 S667, JOINT TORIQUE R22 A29.3 D3.6, BAGUE R9 M146, RI 12.37 x 2.62 EPDM -50, O-RING D 31.4 D 0.62, O-RING D 23.4 D 3.53, BAGUE R82 NT1932 S667, SECURITY COVER GASKET, JOINT ISOLATEUR D316( for 245KV and above chamber insulator gasket), INSUALTOR GASKET D226(suppot insulators for 245KV and above), Trip/Close Coil, 220V DC, Trip Magnet Assy FK3-1 , Close Magnet Assy FK3-1 , Aux Contact Assy 16 NO+16 NC, Motor Limit Switch (4NO+ 4NC), Plastic Gear Assy With Bearings, Spring Charging Motor 220 VAC/DC, OPERATION COUNTER, Dashpot Assembly FK3-1CK, View Glass with Beading, Sealing Ring (Rain Sheild), Crank Wheel Assy FK 3-1 CK, Roller Lever Assy for FK 3-1 CK, Trip latch stage 1 with spring/FK3-1 CK, Trip Latch Assy Stage 2 for FK 3-1 CK, Close Latch for FK3-1 CK, Freewheel assembly with Bearing FK3-1CK, NRB Assy for FK3-1 CK, Manual Charging Gear Assy FK3-1CK, LOC-OFF-REM SWITCH LOCKABLE, AC CONTACTOR 230V 2NO+2NC, ADD ON BLOCK 1NO+1NC, DC CONTROL SWITCH, POLE DISCREPANCY RELAY- VTT11 , SIEMENS TIMER 0.05 to 100hrs -24 v 240 AC/DC, POLE/DISCREPANCY TIMER 3RP15 25-1BW30 8K, PUSH BUTTON (1 FULL SET), DC MCB 6A DP, Reinforced Rubber Beading for LCC(1CB 10 MTR), CONSUMABLE KIT, Each Kit Contains Molykote 111 (100 grams), Loctite 8103 (25grams) Molykote PG54 (25grams) Contactal Grease, Loctite 243 Thread Removable Locker (25ml) Loctite 262 Thread, mobilex bt3 (100grams) permanent Locker (25ml),, GLATTOL 4130 982 (Shell Alvania (200 Gm))

Description: CATEGORY: Making of trenches of size 600mmx800mm starting from transformer to LT Panel in Power Supply room by digging the soil by removing the debris or Malba from the trenches at Akashvani Ramgarh, Jaisalmer , Making of trenches of size 600mmx800mm starting from transformer to LT Panel in Power supply room of building by digging CC flooring by removing the debris or Malba from trenches at Akashvani Ramgarh , Providing and grouting 02Nos. of 4inches dia G.I. Pipes 05Mtr each on the Cement concrete flooring area at Akashvani HPT Ramgarh, Jaisalmer, Rajasthan , Providing, Grouting and fixing 4inch dia G.I. Pipes along the transformer foundation wall at Akashvani HPT Ramgarh, Jaisalmer, Rajasthan , Unwinding roll of 185 sq mm 3 and half core cable from the cable drum and laying 2 length of this power cable through the trenches and through the GI Pipes as laid down at HPT Ramgarh, Jaisalmer , Reconstructing the CC Flooring and repairing the area with Cement concrete and stone aggregate mixer and finishing the surface, Complete in all respect at HPT Ramgarh, Jaisalmer , Providing and fixing cable route marker of cast iron 5inch dia in 5 mtr interval in whole length of cable at HPT Ramgarh, Jaisalmer , Making 01 mtr dia loop of cable at both end of the spare cable and covering by soil with proper marking for future use at HPT Ramgarh, Jaisalmer , Making of trenches size 600mmx600mm starting from DG Sets to LT Panel Laying one layer of 4inch thick Sand for each cable in the trenches at HPT Ramgarh, Jaisalmer , Providing and grouting 02Nos of 3inch dia GI pipes 05Mtr each along the DG foundation the Cement concrete flooring area at HPT Ramgarh, Jaisalmer , Unwinding roll of 120 sq mm 3 and half core cable from the cable drum and laying These 2 power cable each of 125mtr through the trenches and through the GI Pipe as laid down at HPT Ramgarh, Jaisalmer , Making 01mtr dia loop of both spare cables at both end cable and covering by soil with proper marking for future use at HPT Ramgarh, Jaisalmer , Providing and fixing cable route marker of cast iron 5 inch dia in 5 mtr interval in whole length of cable at HPT Ramgarh, Jaisalmer , Supply, Installation and Testing of professional grade DTH 1.2 Mtrs. Double Ribbed or High gain prime focus Dish Antenna of Aluminium Dish with G.I Frame. , Installation, Testing and Commissioning of the APFC panel including providing hole fastner, consumable hardware, interconnecting cable termination with lugs to and fro from LT panel.

Details: Description:- Drilling And Sinking Of Deep Tubewell Of Size 250x200mm, Dia In All Classes Of Soil including Supplying And Sinking Of Standard High Density Polytheylene (upvc) Casin Pipe Of Per Is 4985 Of Sige 200mm Internal Dia In Loose Starta Extended Minimum 1m (one ) Metre Inside Hard Rock to Prevent Collapsing Of Bore. The Bottom Bore Hole Should Be Of Size 200,mm Dia Clear Internal Dia for A Minimum Defth Of 100m Below Ground Level. The Rate Shall Include Supplying And Fixing M.s.cap at Top Of Bore Well, Labour, Machinery, Materials, Consumable Item, Leading, Loading, Unloading, Lead, lift, In All Respect Complete. The Rate Shall Also Include Development Of Bore By Compressor And testing Of Yield 03 Consecutive Days For A Minimum 07 Hrs. On Each Day Continuously With Minimum 3000gph. The Pump Will Be Supplied By Contractor For Testing The Yield. (excluding Station Dhn) (no water No Payment).

Details: CATEGORY: Custom Bid for Services - Provision of manpower for OBHS in Vande Bharat Rakes Rates inclusive of GST , Custom Bid for Services - Provision of consumable material for OBHS during passenger services in Vande Bharat Rakes Rates inclusive of GST , Custom Bid for Services - Provision for cleaning of coach interior during Primary cleaning and watering of Vande Bharat Rakes including manpower and materials Rates inclusive of GST , Custom Bid for Services - Provision for cleaning of coach exterior during Primary cleaning and watering of Vande Bharat Rakes including manpower and materials Rates inclusive of GST , Custom Bid for Services - Provision for cleaning of coach interior during depot examination intensive cleaning and watering of Vande Bharat Express including manpower and materials Rates inclusive of GST , Custom Bid for Services - Provision for cleaning of coach exterior during depot examination intensive cleaning and watering of Vande Bharat Express including manpower and materials Rates inclusive of GST , Custom Bid for Services - Provision for exterior and interior cleaning intensive cleaning of Vande Bharat Model installed at Rail Bhavan New Delhi including manpower and materials Rates inclusive of GST

Details: Description:- Sw I:-removal Of Vegetation And Garbage At Sse/p.way/vpt Section :"removal And routing Out Of Jungle, Bushes Including Cutting And Clearing The Rank Vegetation Along Side Of The track Upto Maximum Of 4.00m As Required ( Which Includes Cess Width And Some Sloping Length Of formation From Edge Of The Shoulder) On Both Sides Of The Single Lines Manually Or Mechanically To keep The Track Neat And Tidy With Necessary Contractor's Lookout Men To Safeguard Against The Traffic, duly Collecting The Removed Vegetation And Materials To Be Dumped After Collection Only At The railway Nominated Places As Nominated By The Engineer-in-charge And After Every Day's Work, It Has to Be Cleared By Deploying Contractor's Men & Machinery, Duly Trucking Out By Contractor's Own Road vehiclesuchastrucks/tractoranddisposingthesameawayfromtherailwaypremiseswith contractor's Men And Machinery. ""without Infringing Track / Traffic Movements And Dumping Them away From The Railway Limit With All Lead And Lift Etc. Complete And As Directed By The Engineer- In- chargefortheperiodoftwoyears(alllabour,toolsandplants,machinery,personalsafety equipments Such As Safety Shoes, Gloves, Etc Vehicles Like Trucks / Tractor And Consumable Stores, fuel, Crew Are To Be Supplied By The Tenderer/contractor At His Own Cost). First Round Of Cleaning Of bushes."""