Chhattisgarh Housing Board Tender
... More
BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Chhattisgarh government has posted on its website in a very hassle-free manner.
Chhattisgarh Housing Board - CGHB Tender
Building Construction
Opening Date30 Jan 2025
Closing Date11 Feb 2025
Tender Amount₹ 77,67,10,000
Costs
EMD
₹ 38,84,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Commercial Cum Resideatial Complex For Construction Of 144 Unit Saffron 3bhk (g+8 Floor) Hig Flat, 08 Unit Leveder 2 Bhk (g+8 Floor) Hig-ii Flat, 48 Unit Jasmine 2 Bhk (s+6 Floor)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
164977Tender No
164977Tender Authority
Chhattisgarh Housing Board ViewPurchaser Address
-Website
http://www.cghb.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 3.00 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits.In Ordinary or hard rocks
12178
-
-
... More
Pumping out water caused by springs tidal or river seepage, broken water main or drains and like during Excavation or during Excavation and laying of base concrete (volume to be calculated taking height from water level to bottom of pit and to be measured and paid) at Any Height.
5779.55
-
-
... More
Supply and Diluting chemical emulsion (chlorpyrifos/ lindane) in water as per manufacturers recommendation and injecting for pre-constructional curative cum preventive anti-termite treatment:(Five year service guarantee bond to be signed by contractor) Surface treatment by spreading emulsion under floor, over the plinth area before laying base concrete @ 5 litres / sqm
3768
-
-
... More
Supply and Diluting chemical emulsion (chlorpyrifos/ lindane) in water as per manufacturers recommendation and injecting for pre-constructional curative cum preventive anti-termite treatment:(Five year service guarantee bond to be signed by contractor) Treatment of inside and Ouside of plinth masonry wall on using diluted chemical emulsion @ 1.5 litre per hole, including drilling 12 mm diameter holes in plinth wall below plinth protection at the interval of 300 mm and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand).
2236
-
-
... More
Providing and laying nominal mix cement concrete with crushed stone aggregate using concrete mixer in foundation, plinth and at any level Including cost of any Type of form work. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size)
2889.12
-
-
... More
Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level Including cost of Any Type of form work. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).
48.71
-
-
... More
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level including cost of any Type of form work. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).
999.04
-
-
... More
Providing and laying design mix reinforced cement concrete with crushed graded stone aggregate 20mm nominal size using batching plant, transit mixer and concrete pump, in all works at upto plinth level Including cost of any type of form work. M-25 Grade
22796.53
-
-
... More
Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:
Ground Floor RCC Qty
Ground Floor RCC Qty
2124.8
-
-
... More
For 1st Floor
2098.95
-
-
... More
For 2nd Floor
2091.53
-
-
... More
For 3rd Floor
1970.19
-
-
... More
For 4th Floor
1729.84
-
-
... More
For 5th Floor
1659.97
-
-
... More
For 6th Floor
1659.97
-
-
... More
For 7th Floor
1514.1
-
-
... More
For 8th Floor
1426.26
-
-
... More
For 9th FloorTerrace Floor
385.07
-
-
... More
For 10th Floor Water tank
121.02
-
-
... More
Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation, plinth and any Floor Level complete:Thermo-Mechanically treated bars FE 500D
2937315.27
-
-
... More
Providing and mixing water proofing material in any Grade PCC/ RCC work in the proportion recommended by the manufacturer.
37446.85
-
-
... More
Providing and fixing in position impregnated fibre board confirming to IS: 1838 in expansion joints, including cost of primer, sealing compound all complete. 25mm thick
14.4
-
-
... More
Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including cost of form work.
23.4
-
-
... More
Making 50mm thick plinth protection of plain cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with sand including finishing the top smooth.
1131
-
-
... More
Providing and fixing in position impregnated fibre board confirming to IS: 1838 in expansion joints, including cost of primer, sealing compound all complete. 25mm thick
2054.88
-
-
... More
Providing and applying for hermetically water proof sealing of vertical / horizontal expansion joint with approved make Poly Sulphide Sealant compound (two component elastomeric sealant) having 80% tensile modulus elongation, proper bonding with building surface complete with cleaning and preparing of building surface, applying polymer solvent primer, providing and fixing PU back up rod of suitable dia in expansion joint for core making, filling with Poly Sulphide Sealant (Sealant filling depth should be minimum half of the joint gap), finishing and smoothing the surface etc complete. The application shall be got done through the authorised applicator of the manufacture of compound For gap 50 mm wide
1682.4
-
-
... More
Providing and fixing aluminium strip 1.60 mm thick on expansion joints with iron screws as per design to match the colour, shade of wall treatment .
438.48
-
-
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom, kitchen etc., by applying cement slurry mixed with water proofing cement compound consisting of following applications including surface preparation:
i) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours.
ii) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound@ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
i) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours.
ii) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound@ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
7094.16
-
-
... More
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of following applications including surface preparation: i) 1st layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. ii) 2nd layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.
iii) 3rdlayer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with coarse sand @ 1.289 kg/sqm and water proofing cement compound @ 0.07 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. iv) 4th and final layer of brick tiling with cement mortar (which will be paid for separately) For the purpose of measurement the entire treated surface will be measured.
iii) 3rdlayer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with coarse sand @ 1.289 kg/sqm and water proofing cement compound @ 0.07 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. iv) 4th and final layer of brick tiling with cement mortar (which will be paid for separately) For the purpose of measurement the entire treated surface will be measured.
8096
-
-
... More
Grading roof for water proofing treatment with:Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
634.96
-
-
... More
Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 2.0 M.
13375.73
-
-
... More
Carriage by mechanical transport upto 25 km lead: Earth
17431.4
-
-
... More
Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete.
13628.73
-
-
... More
Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand)
9137.94
-
-
... More
Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:
For Ground Floor
For Ground Floor
1345.14
-
-
... More
For 1st Floor
1139.17
-
-
... More
For 2nd Floor
1113.62
-
-
... More
For 3rd Floor
1023.6
-
-
... More
For 4th Floor
874.04
-
-
... More
For 5th Floor
768.54
-
-
... More
For 6th Floor
768.54
-
-
... More
For 7th Floor
633.33
-
-
... More
For 8th Floor
617.17
-
-
... More
For Terrace
239.35
-
-
... More
Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in superstructure above plinth level upto plinth level:Cement Mortar 1:4 (1 cement : 4 coarse sand)
15932.54
-
-
... More
Extra for providing and placing in position hopping 25x1.60 mm or 2 Nos 6mm dia MS bars reinforcement at every third course of half brick masonry.
15932.54
-
-
... More
Extra for half brick work in superstructure above plinth level for every story or part thereof in addition to rate for upto plinth level:
For 1st Floor
For 1st Floor
2249.18
-
-
... More
For 2nd Floor
2312.04
-
-
... More
For 3rd Floor
2160.9
-
-
... More
For 4th Floor
2160.9
-
-
... More
For 5th Floor
2009.7
-
-
... More
For 6th Floor
2009.7
-
-
... More
For 7th Floor
1515.06
-
-
... More
For 8th Floor
1515.06
-
-
... More
Providing 40x5mm iron hold fast 40cm long including fixing to frame with 10mm bolts nuts and wooden plug and embedding in Cement Concrete 1:2:4 in blocks of size 30x10x15 cm at any Floor..
8958
-
-
... More
Providing and fixing Dash fastener (for fixing door/ window frames) on C.C. / R.C.C./ Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete at any Floor. Dash fastener 10x75mm
4468
-
-
... More
Dash fastener 12x100mm
6474
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position at any Floor.. Sal, bijasal, benteak, khair, haldu
93.12
-
-
... More
Providing and fixing M.S. frames of doors, windows, ventilators and cupboards joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer at any Floor.. Angle-iron frames
727.65
-
-
... More
Providing and fixing 40mm thick paneled or glazed or paneled and glazed shutter frames for doors excluding hinges and paneling at any Floor.. (Area of shutter to be measured without deducting paneling area) Teak wood
562.59
-
-
... More
Providing and fixing paneling in paneled or paneled and glazed shutters for doors etc. (only area of paneling to be measured). Paneling for or paneled and glazed shutters 25 mm to 40 mm thick: Teak wood (16mm thick panel)
270.96
-
-
... More
Providing and fixing 35mm thick wire gauge shutter having top and style rail 95mm width, bottom and lock rail 197mm width, using galvanized M.S. wire dia of 0.45 mm for doors, windows, clerestory windows excluding hinges at any Floor.. Teak Wood
685.44
-
-
... More
Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges at any Floor..
40 mm. thick (single leaf) FOR HIG SAFFRON
40 mm. thick (single leaf) FOR HIG SAFFRON
55.44
-
-
... More
FOR LIG JASMINE
10.08
-
-
... More
Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges.
35 mm. thick (single leaf) FOR HIG SAFFRON
35 mm. thick (single leaf) FOR HIG SAFFRON
1900.4
-
-
... More
FOR LIG JASMINE
423.36
-
-
... More
FOR DEVELOPMENT
6
-
-
... More
Providing and fixing flush door shutters, conforming to IS 2202 (Part 1), interior grade, commercial type, core of block board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains, cross bands and face veneers on both faces of shutters excluding hinges at any Floor..
35 mm. thick (single leaf)
FOR EWS MARIGOLD
35 mm. thick (single leaf)
FOR EWS MARIGOLD
327
-
-
... More
FOR DEVELOPMENT
11.34
-
-
... More
Providing and fixing flush door shutters, conforming to IS 2202 (Part 1), interior grade, commercial type, core of block board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains, cross bands and face veneers on both faces of shutters excluding hinges at any Floor..
30 mm. thick (single leaf) FOR EWS MARIGOLD
30 mm. thick (single leaf) FOR EWS MARIGOLD
126
-
-
... More
Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge at any Floor.
FOR LIG JASMINEFOR LIG JASMINE
FOR LIG JASMINEFOR LIG JASMINE
475.2
-
-
... More
FOR EWS MARIGOLD
792
-
-
... More
Providing and fixing 30mm thick factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on either side forming styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per Manufacturer’s specification including 3 nos ISI marked stainless steel hinges of size 100x58x1.9 mm complete at any Floor. (for W.C. and bathroom door shutter).
Both side Pre-laminated panel PVC door shutter FOR LIG JASMINE
Both side Pre-laminated panel PVC door shutter FOR LIG JASMINE
151.2
-
-
... More
FOR EWS MARIGOLD
252
-
-
... More
Structural steel work in single section including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer at any Floor.
5376
-
-
... More
Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer at any Floor.
200.23
-
-
... More
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer at any Floor.
39340.2
-
-
... More
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50m in height dimension comprising of uPVC multi-chambered frame with in- built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazed beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc/alloy body with single nylon rollers (weight bearing capacity to be 40Kg,)G.I. fasteners 100 x 8mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage o water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weater proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-charge at any Floor .(Single/double glass panes, wire mesh and sillicon sealent shall be paid separately vide chapter no. 9.51,9.58,9.59 Respectively)
Note : For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.
Two track two panels sliding window made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2mm and single glazed bead of appropriate dimension. (Area of window above 1.75 sqm)
Note : For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.
Two track two panels sliding window made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2mm and single glazed bead of appropriate dimension. (Area of window above 1.75 sqm)
109.44
-
-
... More
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50m in height dimension comprising of uPVC multi-chambered frame with in- built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazed beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc/alloy body with single nylon rollers (weight bearing capacity to be 40Kg,)G.I. fasteners 100 x 8mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage o water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weater proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-charge at any Floor .(Single/double glass panes, wire mesh and sillicon sealent shall be paid separately vide chapter no. 9.51,9.58,9.59 Respectively)
Note : For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.
Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2mm and single glazed bead of appropriate dimension. (Area of window above 1.75 sqm)
Note : For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.
Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2mm and single glazed bead of appropriate dimension. (Area of window above 1.75 sqm)
691.32
-
-
... More
Providing and fixing factory made oPVC colour sliding glazed door comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads,uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required),EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg.) G.I. fasteners 100 x 8mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, includin drilling of holes for fixing hardware's and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof sillicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-charge at any Floor. (SIngle/double glass panes,wire mesh and silicon sealent shall be paid separately vide chapter no. 9.51,9.58,9.59 Respectively)
Note : For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.
Three track three panels sliding door with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & 46 x 82 mm both having wall thickness of 2.3 ± 0.2mm and single glazing bead of appropriate dimension at any Floor. (Area of door above 2.00 sqm upto 5.00 sqm)
Note : For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.
Three track three panels sliding door with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & 46 x 82 mm both having wall thickness of 2.3 ± 0.2mm and single glazing bead of appropriate dimension at any Floor. (Area of door above 2.00 sqm upto 5.00 sqm)
2625.84
-
-
... More
Motorised Rolling Shutter
Model: RS78GS
Curtain made of single skinned Galvalume steel laths with natural finish, Pressed galvalume steel hood & motor cover with natural finish, CE Certified CRS compact Gear P.R.C. make indirect drive operator, 1.20mm thick M.S. sheet top cover for rolling shutter and Three station push button with deadman control and Panel including Arrangement for Manual Opration in case of Emergency etc. with Locking Arrangement Complete.
( Make and Model- Gandhi Automation)
Model: RS78GS
Curtain made of single skinned Galvalume steel laths with natural finish, Pressed galvalume steel hood & motor cover with natural finish, CE Certified CRS compact Gear P.R.C. make indirect drive operator, 1.20mm thick M.S. sheet top cover for rolling shutter and Three station push button with deadman control and Panel including Arrangement for Manual Opration in case of Emergency etc. with Locking Arrangement Complete.
( Make and Model- Gandhi Automation)
660.66
-
-
... More
Providing and fixing bright finished brass sliding door bolt with nuts and brass polished MS screws complete at Any Floor: 300x16mm
FOR HIG SAFFRON
FOR HIG SAFFRON
1426
-
-
... More
FOR LIG JASMINE
392
-
-
... More
FOR DEVELOPMENT
3
-
-
... More
Providing and fixing brass door latch with brass polished MS screws complete at Any Floor: 300x16x5 mm
FOR HIG SAFFRON
FOR HIG SAFFRON
1426
-
-
... More
FOR LIG JASMINE
392
-
-
... More
FOR DEVELOPMENT
3
-
-
... More
Providing and fixing bright finished brass tower bolts (barrel type) with brass polished MS screws complete at Any Floor: 250x10mm
FOR HIG SAFFRON
FOR HIG SAFFRON
1434
-
-
... More
FOR LIG JASMINE
392
-
-
... More
FOR DEVELOPMENT
3
-
-
... More
Providing and fixing bright finished brass door handles with brass polished MS screws complete at Any Floor: 125 mm
FOR HIG SAFFRON
FOR HIG SAFFRON
2868
-
-
... More
FOR LIG JASMINE
784
-
-
... More
FOR DEVELOPMENT
6
-
-
... More
Providing and fixing bright finished brass butt hinges with brass polished MS screws complete at Any Floor: 125x85x5.50 mm FOR HIG SAFFRON(Heavy Type)
5736
-
-
... More
FOR LIG JASMINE
1568
-
-
... More
FOR DEVELOPMENT
24
-
-
... More
Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete at Any Floor. 300mm
FOR EWS MARIGOLD
FOR EWS MARIGOLD
410
-
-
... More
FOR DEVELOPMENT
6
-
-
... More
Providing and fixing stainless steel door latch with 12mm rod, 2.5mm thick flap, necessary stainless steel screws etc complete at Any Floor. 300mm
FOR EWS MARIGOLD
FOR EWS MARIGOLD
410
-
-
... More
FOR DEVELOPMENT
6
-
-
... More
Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete at Any Floor. 250 x10mm
FOR EWS MARIGOLD
FOR EWS MARIGOLD
410
-
-
... More
FOR DEVELOPMENT
6
-
-
... More
Providing and fixing Stainless steel
820
-
-
... More
FOR DEVELOPMENT
12
-
-
... More
Providing and fixing stainless steel butt hinges IS : 12817 marked with necessary stainless steel screws etc complete at Any Floor. 150x2.5mm (heavy)
FOR EWS MARIGOLD
FOR EWS MARIGOLD
1640
-
-
... More
FOR DEVELOPMENT
24
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded and powder coated (minimum 50 micron) aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15.at any Floor (Glazing to be paid for separately:
For fixed portion
For fixed portion
3940.26
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded and powder coated (minimum 50 micron)aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15 at any Floor. (Glazing to be paid for separately:
For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately).
For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately).
3964.56
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete at any Floor. (Cost of aluminium snap beading shall be paid in basic item):
With float glass panes of 4 mm thickness
With float glass panes of 4 mm thickness
4212.49
-
-
... More
Providing and fixing stainless wire gauge of average width of aperture 1.56mm with wire of 0.35mm to existing steel door, window shutter frames with necessary M.S. strip beading etc. complete at any Floor.
2096.1
-
-
... More
Providing and fixing concertina coil fencing with required dia 610 mm (having 50 nos. round per 6 metre length) up to 3m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart tied with G.I. staples and G.I. clips to retain horizontal including necessary bolts or G.I. barbed wire tied to angle iron all complete as per direction of Engineer-in charge with reinforced barbed tape (R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)
3277.5
-
-
... More
Providing and placing in position angle iron post and strut of required size including bottom to be split and bent at right angle in opposite direction for required length and drilling holes upto 10 mm dia as per requirement including priming coat with red oxide zinc chromate primer and placing the post/ strut in cement concrete block.
2519
-
-
... More
Providing stainless steel railing/ grill made of S.S. flats, hollow S.S. pipe or square/ rectangular sections of approved design fixing in stair case, balcony or other places with metal fasteners and stainless steel bolts etc complete at any Floor. SS Grade 204
6611.25
-
-
... More
Providing and fixing approved pipe hand rail by welding to iron railing including applying a priming coat of red oxide zinc chromate primer at any Floor. G.I. pipe
30335.9
-
-
... More
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rails of T-iron 40x40x6mm with 38mm steel pulleys complete with bolts, nuts, locking arrangement stoppers, handles including applying a priming coat of red oxide zinc chromate primer.
45
-
-
... More
Steel work in tubular (round, square or rectangular hollow tubes etc.) structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level,consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete Including providing curvature in making steel work in tubular structure in built-up sections, trusses and frame work and hoisting trusses and placing in position upto height of 5m for or part thereof with applying a priming coat of red oxide zinc chromate primer Electric resistance or induction butt welded tubes Grade-250
19600
-
-
... More
Extra for hoisting trusses and placing in position over height above 5m for
every 2.5 m height or part thereof
every 2.5 m height or part thereof
5880
-
-
... More
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
5170
-
-
... More
Providing corrugated G.I. sheet roofing including vertical/ curved surfaces fixed with galvanized iron, J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead including painting with primer and paint on overlapping of sheets complete excluding the cost of purlins rafters and trusses. (Zinc coating not less than 272 gms/sqm) 1.00 mm thick sheet (weight 8.60 kg/m2)
300
-
-
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down grade) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design at any Floor :
3746.8
-
-
... More
Neat Cement punning at Any Floor. .
1782.96
-
-
... More
Providing and making 18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 fine sand) per cm width at Any Floor. : Drip course
8617.8
-
-
... More
Providing and making 6mm thick cement plaster of mix at Any Floor. : In Cement mortar 1:4 (1 cement : 4 fine sand)
52961.66
-
-
... More
Providing and making 12mm thick cement plaster of mix at Any Floor. : In Cement Mortar 1:5 (1 cement : 5 fine sand)
1506.41
-
-
... More
Providing and making 12mm thick cement plaster of mix at Any Floor at Any Floor : In Cement Mortar 1:6 (1 cement : 6 fine sand)
60116.55
-
-
... More
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix at Any Floor. : In Cement Mortar 1:5 (1 cement : 5 fine sand)
1596.74
-
-
... More
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix at Any Floor. : In Cement Mortar 1:6 (1 cement : 6 fine sand)
66908.03
-
-
... More
Providing and making 18 mm thick cement plaster with under layer of 12mm thick cement plaster 1:5 (1 cement : 5 fine sand) finished with a top layer of 6mm thick cement plaster 1:3 (1 cement : 3 fine sand) at Any Floor. .
33585.34
-
-
... More
Moulding cornices and cover. Straight cornices in their length at Any Floor.
5.34
-
-
... More
Moulding cornices and cover. Curved cornices in their length at Any Floor.
5.34
-
-
... More
Making grove in cement plaster while plastering upto10 mm deep and 10 mm wide at Any Floor. .
9006
-
-
... More
Providing and fixing chicken mesh weighting not less than 250 gms/sqm as per IS : specification in the required width with 40mm long steel nails on vertical and horizontal surface near R.C.C. and brick walls junctions including scaffolding and all lead and lifts etc. complete before plastering at any floor height.
26350.66
-
-
... More
Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement at Any Floor. 50 mm thick
16.53
-
-
... More
Providing and laying DOUBLE/MULTI CHARGE (minimum 2.0mm thick layer) VITRIFIED floor tiles(heavy duty) with water absorption less than 0.05% and conforming to IS: 15622-2017 of 1st quality of approved make in all colours,shade and size mensioned below(+/- 10mm),laid on 20mm thick cement mortar 1:4 (1cement:4 course sand) including grouting th ejoints with white cement and matching pigments etc. complete at Any Floor.
Size 1200x1200 mm thickness 10 to 12 mm FOR HIG SAFFRON
Size 1200x1200 mm thickness 10 to 12 mm FOR HIG SAFFRON
17385.01
-
-
... More
Providing and laying Glazed Vitrified Floor tiles (GVT/PGVT) with digital print of random design with water absorption less than 0.05% and conforming to IS: 15622-2017 of 1st quality of approved make in all colours,shade and size mensioned below(+/- 10mm),laid on 20mm thick cement mortar 1:4 (1cement:4 course sand) including grouting th ejoints with white cement and matching pigments etc. complete at Any Floor.
Size 600x600 mm thickness 9 to 10 mm
FOR LIG JASMINE
Size 600x600 mm thickness 9 to 10 mm
FOR LIG JASMINE
3038.4
-
-
... More
FOR EWS MARIGOLD
1807.2
-
-
... More
Providing and Fixing rectified glazed ceramic floor tiles of 1st quality conforming to IS: 15622-2017 of approved make,in all colours shade over 20mm thick bed of cement mortar 1:3 (1 cement:3 course sand) and joining with grey cement slurry @ 3.3kg per sqm. including pointing in white cement mixed with matching pigment complete at Any Floor. Size 600x600 mm thickness 8 to 9 mm FOR HIG SAFFRON
5073.82
-
-
... More
Providing and Fixing rectified glazed ceramic floor tiles of 1st quality conforming to IS: 15622-2017 of approved make,in all colours shade over 20mm thick bed of cement mortar 1:3 (1 cement:3 course sand) and joining with grey cement slurry @ 3.3kg per sqm. including pointing in white cement mixed with matching pigment complete at Any Floor. Size 300x300 mm thickness 7 to 8 mm FOR LIG JASMINE
340.29
-
-
... More
FOR EWS MARIGOLD
716
-
-
... More
FOR DEVELOPMENT
16.58
-
-
... More
Providing and Fixing rectified glazed ceramic wall/dado tiles of 1st quality conforming to IS: 15622-2017 of approved make,in all colours shade in wall and dado over 12mm thick bed of cement mortar 1:3 (1 cement:3 course sand) and joining with grey cement slurry @ 3.3kg per sqm. including pointing in white cement mixed with matching pigment complete at Any Floor.
Size 400x800 mm thickness 7 to 9 mm
FOR HIG SAFFRON
Size 400x800 mm thickness 7 to 9 mm
FOR HIG SAFFRON
11752.82
-
-
... More
Providing and Fixing rectified glazed ceramic wall/dado tiles of 1st quality conforming to IS: 15622-2017 of approved make,in all colours shade in wall and dado over 12mm thick bed of cement mortar 1:3 (1 cement:3 course sand) and joining with grey cement slurry @ 3.3kg per sqm. including pointing in white cement mixed with matching pigment complete at Any Floor.
Size 300x450 mm thickness 7 to 8 mm
FOR LIG JASMINE
Size 300x450 mm thickness 7 to 8 mm
FOR LIG JASMINE
1555.44
-
-
... More
FOR EWS MARIGOLD
2065.2
-
-
... More
FOR DEVELOPMENT
15.71
-
-
... More
25 mm thick KOTA stone slab flooring over 20mm (Average) thick base of cement mortar 1:4 laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding rubbing polishing, nosing etc. complete. (Area of slab to be over 0.20 sqm and upto 0.50 sqm) at Any Floor
FOR EWS MARIGOLD
FOR EWS MARIGOLD
181.25
-
-
... More
KOTA stone slab 25mm thick in risers and treads of steps, skirting dado and pillar laid in 12mm (Average) thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing, nosing in steps and treads of Kota stone slab etc. complete. (single stone is to be used for riser and treads of steps and the width of stone for skirting and dado shall be equal to the height of skirting/ dado up to length of 1.0 M.) at Any Floor
FOR EWS MARIGOLD
FOR EWS MARIGOLD
407.5
-
-
... More
15 mm thick Table rubbed polished Granite stone slab flooring laid over 20mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing, Nosing and Moulding etc. complete. (Area of slab should be 0.50 sqm and above) at Any Floor Granite stone grey/pink
FOR HIG SAFFRON
FOR HIG SAFFRON
2269.54
-
-
... More
FOR LIG JASMINE
347.2
-
-
... More
15 mm thick Table rubbed polished Granite stone slab flooring laid over 20mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing, Nosing and Moulding etc. complete at Any Floor. (Area of slab should be 0.50 sqm and above) Granite stone black
FOR HIG SAFFRON
FOR HIG SAFFRON
1513.02
-
-
... More
FOR LIG JASMINE
231.46
-
-
... More
15 mm thick Table rubbed polished Granite stone slab in risers and treads of steps skirting dado and pillars laid on 12mm (average) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry including rubbing, polishing, nosing, moulding etc. complete at Any Floor. (single stone is to be used for risers and treads of steps and width of stone for skirting and dado shall be equal to the height of skirting & dado and length of 1.0 m).Granite stone grey/pink FOR HIG SAFFRON
378.9
-
-
... More
FOR LIG JASMINE
34.65
-
-
... More
15 mm thick Table rubbed polished Granite stone slab in risers and treads of steps skirting dado and pillars laid on 12mm (average) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry including rubbing, polishing, nosing, moulding etc. complete at Any Floor. (single stone is to be used for risers and treads of steps and width of stone for skirting and dado shall be equal to the height of skirting & dado and length of 1.0 m). Granite stone black FOR HIG SAFFRON
991.8
-
-
... More
FOR LIG JASMINE
117.5
-
-
... More
15mm thick Granite work (machine cut, table rubbed & mirror polished) for wall lining (veneer work) in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing with cement mortar 1:2 (1 white cement: 2 marble dust) mixed with matching pigment at Any Floor. (Area of slab should be over 0.5 sqm). Granite stone black FOR HIG SAFFRON
955.67
-
-
... More
FOR LIG JASMINE
84.84
-
-
... More
15mm thick Granite work (machine cut, table rubbed & mirror polished) for kitchen platform, vanity counters, window sills and similar locations of required size laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) including joints treated with white cement mixed with matching pigment including rubbing and polishing to edge moulding to give high gloss finish including nosing, moulding and Making opening of required size & shape for wash basins/ kitchen sink in kitchen platform at Any Floor Granite stone black FOR HIG SAFFRON
3368.04
-
-
... More
FOR LIG JASMINE
529.2
-
-
... More
FOR EWS MARIGOLD
297.5
-
-
... More
Providing and fixing one side polished 25 mm thick RAJIM SAND STONE shelves fixed in walls in cement mortar 1:3 (1 cement : 3 coarse sand) including finishing complete at Any Floor. One side polished
1037.4
-
-
... More
Providing and fixing one side polished 25 mm thick RAJIM SAND STONE shelves fixed in walls in cement mortar 1:3 (1 cement : 3 coarse sand) including finishing complete at Any Floor. Both side polished
165.6
-
-
... More
Providing & laying 60mm thick precast interlocking concrete blocks of approved size (approx 305 sqcm) and shape/ pattern, over 40 mm thick average complete coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, temping and sweeping etc. complete of minimum compressive strength of 250 kg/sq.cm
Pigment Coloured (rubber mould) precast interlock concrete blocks
Pigment Coloured (rubber mould) precast interlock concrete blocks
6844.9
-
-
... More
Providing and laying tectile tiles rubber moulded precast concrete tile wet transvrse strenth not less than 3N/sq mm. (for vision impared persons as per standard laid down in CPWD guide lines) of size 300x300 mm and total thickness 30 mm in all colour according to IS:13801-2013 laid on 20mm thick cement mortar 1:4 (1cement:4 course sand) including grouting th ejoints with white cement and matching pigments etc. complete at Any Floor. Dot pattern hazard warning tectile 23 mm dia 36 dots (6 dots in both direction) and 5mm exposed from the surface.FOR HIG SAFFRON
140.7
-
-
... More
Providing and laying tectile tiles rubber moulded precast concrete tile wet transvrse strenth not less than 3N/sq mm. (for vision impared persons as per standard laid down in CPWD guide lines) of size 300x300 mm and total thickness 30 mm in all colour according to IS:13801-2013 laid on 20mm thick cement mortar 1:4 (1cement:4 course sand) including grouting th ejoints with white cement and matching pigments etc. complete at Any Floor. Strip pattern directional tectile 23mm strip 4 nos. equally spaced and 5mm exposed from the surface. FOR HIG SAFFRON
140.7
-
-
... More
Distempering with acrylic washable distemper to give an even shade at Any Floor. . On new work (Two or more coats)
215.99
-
-
... More
Wall painting with acrylic premium emulsion (plastic) paint of required shade to give an even shade at Any Floor. . On new work (two or more coats) FOR EWS MARIGOLD
16415.83
-
-
... More
Wall painting with acrylic luxury emulsion (plastic) paint of required shade to give an even shade at Any Floor. . On new work (two or more coats) FOR HIG SAFFRON
135619.48
-
-
... More
FOR LIG JASMINE
19639.54
-
-
... More
Applying one coat of cement primer on wall surface (applied @ 0.80 litrs/10 sqm) complete at Any Floor. FOR HIG SAFFRON
91388.72
-
-
... More
FOR LIG JASMINE
15040.7
-
-
... More
FOR EWS MARIGOLD
13504.88
-
-
... More
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even at Any Floor. FOR HIG SAFFRON
162462.58
-
-
... More
FOR LIG JASMINE
26829.05
-
-
... More
FOR EWS MARIGOLD
16415.83
-
-
... More
FOR DEVELOPMENT WORK
408.56
-
-
... More
Finishing walls with water proofing cement paint of required shade to give an even shade at Any Floor. On new work (Two or more coats applied @ 3.84 kg/10 sqm)
137.25
-
-
... More
Painting exterior surface with PREMIUM ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete at Any Floor with: On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) FOR HIG SAFFRON
26843.1
-
-
... More
FOR LIG JASMINE
7189.51
-
-
... More
FOR EWS MARIGOLD
7089.34
-
-
... More
FOR DEVELOPMENT WORK
2829.33
-
-
... More
Providing and laying Melamine polish on new wood work (two or more coats) with spray machine after preparing surface by rubbing down smooth with sand papers, preparation of surface, applying 5 to 10 coats of French sprit polish, applying two coats of Melamine sealer and finally applying two coats of Melamine clear as per manufacturers specifications complete at Any Floor: FOR HIG SAFFRON
6839.47
-
-
... More
FOR LIG JASMINE
1326.77
-
-
... More
Painting on new work (two or more coats) to give an even shade at Any Floor with: Premium synthetic enamel paint
4746.88
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge at Any Floor. 25 mm nominal outer dia pipes
560
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge at Any Floor. 32 mm nominal outer dia pipes
560
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge at Any Floor. 40 mm nominal outer dia pipes
1230
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm nominal outer dia pipes
540
-
-
... More
Providing and laying in trenches G.I. pipes medium class complete with G.I. fittings including excavation of trenches, refilling the same and testing of joints complete at Any Floor:
50 mm dia. nominal bore
50 mm dia. nominal bore
250
-
-
... More
Providing and laying in trenches G.I. pipes medium class complete with G.I. fittings including excavation of trenches, refilling the same and testing of joints complete at Any Floor:
80 mm dia. nominal bore
80 mm dia. nominal bore
510
-
-
... More
Making connection of G.I. distribution branch in G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete at Any Floor: (dia of main line to be measured) 25 mm nominal bore
6
-
-
... More
Making connection of G.I. distribution branch in G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete at Any Floor: (dia of main line to be measured) 32 mm nominal bore
6
-
-
... More
Making connection of G.I. distribution branch in G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete at Any Floor: (dia of main line to be measured) 40 mm nominal bore
36
-
-
... More
Making connection of G.I. distribution branch in G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete at Any Floor: (dia of main line to be measured) 50 mm nominal bore
9
-
-
... More
Making connection of G.I. distribution branch in G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete at Any Floor: (dia of main line to be measured) 80 mm nominal bore
4
-
-
... More
Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end) at Any Floor: 25 mm nominal bore
89
-
-
... More
Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end) at Any Floor : 32 mm nominal bore.
9
-
-
... More
Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end) at Any Floor: 40 mm nominal bore.
44
-
-
... More
Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end) at Any Floor: 50 mm nominal bore.
18
-
-
... More
Cutting holes upto 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof at Any Floor.
2160
-
-
... More
Providing and fixing G.I. Union in G.I. pipe (New work) including cutting and threading the pipe and making long screws etc. complete at Any Floor 15 mm nominal bore
1120
-
-
... More
Providing and fixing G.I. Union in G.I. pipe (New work) including cutting and threading the pipe and making long screws etc. complete at Any Floor 20 mm nominal bore
1120
-
-
... More
Providing and fixing G.I. Union in G.I. pipe (New work) including cutting and threading the pipe and making long screws etc. complete at Any Floor: 25 mm nominal bore
9
-
-
... More
Providing and fixing G.I. Union in G.I. pipe (New work) including cutting and threading the pipe and making long screws etc. complete at Any Floor: 32 mm nominal bore.
9
-
-
... More
Providing and fixing G.I. Union in G.I. pipe (New work) including cutting and threading the pipe and making long screws etc. complete at Any Floor: 40 mm nominal bore.
44
-
-
... More
Providing and fixing G.I. Union in G.I. pipe (New work) including cutting and threading the pipe and making long screws etc. complete at Any Floor: 50 mm nominal bore.
6
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge at Any Floor. 15 mm nominal outer dia .Pipes.
4800
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge at Any Floor. 20 mm nominal outer dia .Pipes.
6600
-
-
... More
Cutting holes upto 30x30 cm in walls including making good the same at Any Floor :
1680
-
-
... More
Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required at Any Floor: Bib cock (400 grams) FOR HIG SAFFRON
912
-
-
... More
FOR LIG JASMINE
192
-
-
... More
FOR EWS MARIGOLD
320
-
-
... More
Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required at Any Floor:Long body bib cock (500 grams ) FOR HIG SAFFRON
152
-
-
... More
FOR LIG JASMINE
48
-
-
... More
FOR EWS MARIGOLD
80
-
-
... More
Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required at Any Floor: Piller Cock (400 grams) FOR HIG SAFFRON
608
-
-
... More
FOR LIG JASMINE
96
-
-
... More
FOR EWS MARIGOLD
80
-
-
... More
Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required at Any Floor: Two way bib cock (800 grams)
656
-
-
... More
FOR HIG SAFFRON
608
-
-
... More
FOR LIG JASMINE
48
-
-
... More
Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required at Any Floor: Stop cock (concealed) (600 grams) FOR HIG SAFFRON
608
-
-
... More
FOR LIG JASMINE
96
-
-
... More
FOR EWS MARIGOLD
80
-
-
... More
Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required at Any Floor: Angle valve for basin mixer and geyser points (450 grams) FOR HIG SAFFRON
456
-
-
... More
FOR LIG JASMINE
432
-
-
... More
FOR EWS MARIGOLD
160
-
-
... More
Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required at Any Floor: Toilet paper holder FOR HIG SAFFRON
704
-
-
... More
Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required at Any Floor: Soap dish plate FOR HIG SAFFRON
704
-
-
... More
Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required at Any Floor: Towel rail (600mm long x 20mm dia) FOR HIG SAFFRON
704
-
-
... More
Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required at Any Floor: Shower rose (revolving type) (150mm) FOR HIG SAFFRON
456
-
-
... More
FOR LIG JASMINE
96
-
-
... More
FOR EWS MARIGOLD
80
-
-
... More
Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required at Any Floor: Health foscet (hand jet) with flexible connection pipe (for WC)
656
-
-
... More
FOR HIG SAFFRON
608
-
-
... More
FOR LIG JASMINE
48
-
-
... More
Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required at Any Floor: Bottle trap set with extension pipes FOR HIG SAFFRON
458
-
-
... More
Providing and fixing stainless steel drain jali of approved make/quality at Any Floor. FOR HIG SAFFRON
1520
-
-
... More
FOR LIG JASMINE
288
-
-
... More
FOR EWS MARIGOLD
400
-
-
... More
Providing and fixing gun metal non- return valve (vertical type) of approved quality (screwed end) at Any Floor : 50 mm nominal bore
12
-
-
... More
Providing and fixing gun metal non- return valve (vertical type) of approved quality (screwed end) at Any Floor : 80 mm nominal bore
4
-
-
... More
Providing and fixing in position precast R.C.C. manhole cover and frame L D- 2.5 of required shape and approved quality Rectangular shape 600x450mm internal dimensions
6
-
-
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing at Any Floor : 5mm thick Mirror
823.23
-
-
... More
Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete Including cutting and making good the walls and floors wherever required at Any Floor : White pedestal type FOR LIG JASMINE
48
-
-
... More
FOR EWS MARIGOLD
80
-
-
... More
Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required at Any Floor: White wall hung type FOR HIG SAFFRON
458
-
-
... More
FOR LIG JASMINE
48
-
-
... More
Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings at Any Floor : White size 550x450mm. FOR LIG JASMINE
96
-
-
... More
FOR EWS MARIGOLD
80
-
-
... More
Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required at Any Floor: White Oval or round size 550x400mm. FOR HIG SAFFRON
458
-
-
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink with drain board as per IS 13983 with C.I. brackets and stainless steel plug
40 mm including painting of fittings and brackets, cutting and making good the walls wherever required at Any Floor :1145x510 mm bowl size 560x410x241 mm FOR HIG SAFFRON
40 mm including painting of fittings and brackets, cutting and making good the walls wherever required at Any Floor :1145x510 mm bowl size 560x410x241 mm FOR HIG SAFFRON
152
-
-
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink without drain board as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required at Any Floor: 560x410 mm bowl depth 215 mm. FOR LIG JASMINE
48
-
-
... More
FOR EWS MARIGOLD
80
-
-
... More
Providing and fixing 15 mm nominal bore uplasticised PVC connection pipe with PTMT nuts and PVC bush of approved quality and colour at Any Floor: 45 CM length FOR HIG SAFFRON
896
-
-
... More
FOR LIG JASMINE
288
-
-
... More
FOR EWS MARIGOLD
160
-
-
... More
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete at Any Floor. 32 mm dia FOR HIG SAFFRON
896
-
-
... More
FOR LIG JASMINE
144
-
-
... More
FOR EWS MARIGOLD
160
-
-
... More
Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete at Any Floor. 75 mm dia pipe.
11110
-
-
... More
Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete at Any Floor. 110 mm dia pipe.
6120
-
-
... More
Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete at Any Floor. 150 mm dia pipe.
1880
-
-
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand :10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes 100 mm diameter S.W. pipe
2700
-
-
... More
Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 75 mm
1360
-
-
... More
Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° at Any Floor 110 mm
2372
-
-
... More
Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° at Any Floor 150 mm
1200
-
-
... More
Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Double
546
-
-
... More
Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Double
546
-
-
... More
Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Vent covel at Any Floor 75 mm
72
-
-
... More
Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Vent covel at Any Floor 110 mm
52
-
-
... More
Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion at Any Floor Nahani trap 110x75mm
2208
-
-
... More
Providing and fixing UV stabilized Unplasticised -PVC pipe clips of approved design to Rigid PVC pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete at Any Floor. 75 mm
1616
-
-
... More
Providing and fixing UV stabilized Unplasticised -PVC pipe clips of approved design to Rigid PVC pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete at Any Floor. 110 mm
2220
-
-
... More
Providing and fixing square-mouth S.W. gully trap grade 'A'’ complete with C.I. grating brick masonry chamber with well burnt modular clay bricks crushing strength not less than 35kg/cm2, water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design at Any Floor : 180x150 mm size P type
96
-
-
... More
Providing and constructing brick masonry road gully chamber 50x45x60 cm with well burnt modular clay bricks crushing strength not less than 35kg/cm2 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design at Any Floor.
40
-
-
... More
Providing and constructing brick masonry chamber for underground pipe and and bends with well burnt modular clay bricks crushing strength not less than 35kg/cm2 in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : Inside dimensions 455x610 mm and 45 cm deep for single pipe line :
30
-
-
... More
Providing and constructing brick masonry chamber for underground pipe and and bends with well burnt modular clay bricks crushing strength not less than 35kg/cm2 in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets :
98
-
-
... More
Providing and constructing brick masonry chamber for underground pipe and and bends with well burnt modular clay bricks crushing strength not less than 35kg/cm2 in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets :
18
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank FOR HIG SAFFRON
152000
-
-
... More
FOR LIG JASMINE
24000
-
-
... More
FOR EWS MARIGOLD
40000
-
-
... More
Providing and fixing white vitreous china urinal basin with waste fitting as per IS : 2556, and other couplings in C.P. brass complete: Flat back half stall urinal of size 460x380x250mm
20
-
-
... More
Providing and fixing 15mm thick Granite (machine cut, table rubbed & mirror polished on both sides) for partition curtain in toilets or similar locations of required size in wall with cement mortar 1:4 (1 cement : 4 coarse sand) including cutting chase in wall and joint with wall treated with white cement mixed with matching pigment including rubbing and polishing to edge moulding to give high gloss finish at Any Floor. Granite stone black
10.92
-
-
... More
Supplying and fixing of following sizes 'B' class G I pipe with all necessary Tee's, bends, sockets in the suction/ delivery line including cutting and threading etc. as required. 100 mm dia.
300
-
-
... More
Boring/ drilling bore well perfectly vertical for the specified depth suitable to receive required die for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge up to 90 meter depth below ground level. All types of soil 150 mm dia.
260
-
-
... More
Boring/ drilling bore well perfectly vertical for the specified depth suitable to receive required die for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge up to 90 meter depth below ground level. Rocky strata including Boulders. 150 mm dia.
224
-
-
... More
Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required die for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge beyond 90 meter & up to 150 meter depth below ground level. Rocky strata including Boulders. 150 mm dia.
280
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, ISI marked G.I. casing pipe (Plain) medium class in 4 to 7 meters length one end fitted with socket as per IS: 1239 (Part-1&Part-2) 1992 with It revision (Up-to-date amendments), of reputed & approved make, including required hire & labor charges, fittings & accessories, all complete, for all depths, as per direction of Engineer- in-charge. 150 mm nominal dia.
284
-
-
... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for bore well of: 150 mm dia.
8
-
-
... More
Carrying out the resistivity survey by VES method using Schlumberger configuration for locating the proper spot for drilling of tube well within the selected habitation, including photography, interpretation of resistivity data and submission of report in the desired format along with resistivity readings, necessary graph and photographs. (only successful point is payable)
8
-
-
... More
Providing, Laying, Jointing & field testing of HDPE pipes (High Density Polyethylene Pipes) confirming to IS 4984/14151/12786/13488 with necessary jointing material like mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jack/ Hydraulic Jacks/ Butt fusion machine including Tee, bend 45/ 90 Degee and Necessary Fitting (50 mm & above fusion jointed & below 50mm mechanical jointed) 160 mm dia
400
-
-
... More
Providing, Laying, Jointing & field testing of HDPE pipes (High Density Polyethylene Pipes) confirming to IS 4984/14151/12786/13488 with necessary jointing material like mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jack/ Hydraulic Jacks/ Butt fusion machine including Tee, bend 45/ 90 Degee and Necessary Fitting (50 mm & above fusion jointed & below 50mm mechanical jointed) 200 mm dia
300
-
-
... More
Providing, Laying, Jointing & field testing of HDPE pipes (High Density Polyethylene Pipes) confirming to IS 4984/14151/12786/13488 with necessary jointing material like mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jack/ Hydraulic Jacks/ Butt fusion machine including Tee, bend 45/ 90 Degee and Necessary Fitting (50 mm & above fusion jointed & below 50mm mechanical jointed) 250 mm dia
200
-
-
... More
Providing, Laying, Jointing & field testing of HDPE pipes (High Density Polyethylene Pipes) confirming to IS 4984/14151/12786/13488 with necessary jointing material like mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jack/ Hydraulic Jacks/ Butt fusion machine. (50 mm & above fusion jointed & below 50mm mechanical jointed) 315 mm dia
120
-
-
... More
Constructing masonry Chamber 90x90x100 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design :
200
-
-
... More
Providing and fixing filter of minimum 100 litre capacity for roof top rain water harvesting through tube well consisting of two layered HDPE tank with five layers (each layers of minimum 100 mm) consist of coarse sand, 4mm, 6mm, 8mm & 12 mm gravels with stainless steel wire mesh fixed between each layer with suitable length and sufficient numbers of 110 mm dia PVC pipe pieces in the bottom of tank to support the above layer including fixing of inlet and out let P.V.C. pipe of required diameter upto 2 metre length on each side, Cement Concrete plateform of required size complete as directed by Engineer in charge. (excluding cost of tubewell and inlet and outlet pipe beyond 2 metre)
20000
-
-
... More
Constructing masonry Chamber 30x30x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :
96
-
-
... More
Supplying, Stacking, Mixing and Spreading of good earth, Sludge and Well Decayed Cow Dung Manure from Approved Source at site including royalty, loading, unloading and carriage upto 20 km. (All Qty measured in stacks will be reduced by 8% for payment).
3558.77
-
-
... More
Rough dressing the trenched ground including breaking clods,Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation and Fine Dressing of the Ground Etc. Complete.
2519.1
-
-
... More
Edging with modular well burnt clay bricks of crushing strength not less than 25kg/ sqcm laid dry length wise including excavation, refilling, consolidating with hand packing and spreading neatly surplus earth within a lead of 50 m :
800
-
-
... More
Providing and fixing M.S. flat iron tree guard 60cm dia. and 2m height above ground level formed of 4 nos. 25x6mm and 8 nos. 25x3mm vertical M.S. flats riveted to 3 nos. 25x6mm M.S. flat iron rings in two halves, bolted together with 8mm dia. and 30mm long bolts including painting two coats with paint of approved brand and manufacture over a coat of priming, complete in all respects.
500
-
-
... More
Providing and planting following herbs in garden including preparation of soil, base plantation, providing and spreading different fertilizers, soil and sand:Hedges like Alife, Dorenta, Tikoma etc
2000
-
-
... More
Providing and planting following herbs in garden including preparation of soil, base plantation, providing and spreading different fertilizers, soil and sand: Furn like Arica, China etc (3 year old)
1000
-
-
... More
Providing and planting following herbs in garden including preparation of soil, base plantation, providing and spreading different fertilizers, soil and sand: Hibiscus (Flower)/ Rose
6000
-
-
... More
Providing and planting following herbs in garden including preparation of soil, base plantation, providing and spreading different fertilizers, soil and sand: Carpet grass
2015.28
-
-
... More
Supply, erection, jointing, testing & commissioning of
300
-
-
... More
Supply, erection, jointing, testing & commissioning of
200
-
-
... More
Supply, erection, jointing, testing & commissioning of
50
-
-
... More
Supply, erection, jointing, testing & commissioning of
120
-
-
... More
Painting for M.S. pipe with a coat of red oxide primer and two or more coats of synthetic enamel paint of approved colour and Quality to give an even shade including surface preparation. 50 mm dia
300
-
-
... More
Painting for M.S. pipe with a coat of red oxide primer and two or more coats of synthetic enamel paint of approved colour and Quality to give an even shade including surface preparation. 65 mm dia
200
-
-
... More
Painting for M.S. pipe with a coat of red oxide primer and two or more coats of synthetic enamel paint of approved colour and Quality to give an even shade including surface preparation. 80 mm dia
50
-
-
... More
Painting for M.S. pipe with a coat of red oxide primer and two or more coats of synthetic enamel paint of approved colour and Quality to give an even shade including surface preparation. 100 mm dia
120
-
-
... More
Providing and wrapping 4 mm thick of approved make and quality bitumen based anti rust felt over MS pipe with overlap of 25 mm to make an impermeable layer including painting with one coat of bitumastic paint before felt complete. (Only on MS pipe to be laid in soil below ground). 50 mm dia
300
-
-
... More
Providing and wrapping 4 mm thick of approved make and quality bitumen based anti rust felt over MS pipe with overlap of 25 mm to make an impermeable layer including painting with one coat of bitumastic paint before felt complete. (Only on MS pipe to be laid in soil below ground). 65 mm dia
200
-
-
... More
Providing and wrapping 4 mm thick of approved make and quality bitumen based anti rust felt over MS pipe with overlap of 25 mm to make an impermeable layer including painting with one coat of bitumastic paint before felt complete. (Only on MS pipe to be laid in soil below ground). 80 mm dia
50
-
-
... More
Providing and wrapping 4 mm thick of approved make and quality bitumen based anti rust felt over MS pipe with overlap of 25 mm to make an impermeable layer including painting with one coat of bitumastic paint before felt complete. (Only on MS pipe to be laid in soil below ground). 100 mm dia
120
-
-
... More
Providing, installation, testing and commissioning of dual plate non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc. as required. 50 mm dia
5
-
-
... More
Providing, installation, testing and commissioning of dual plate non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc. as required. 65 mm dia
5
-
-
... More
Providing, installation, testing and commissioning of dual plate non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc. as required. 80 mm dia
5
-
-
... More
Providing, installation, testing and commissioning of dual plate non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc. as required. 100 mm dia
5
-
-
... More
Supplying, fixing, testing and commissioning of flanged butterfly valve PN 1.6, with Bronze/Gunmetal seat duly ISI marked complete with Nuts, Bolts, washers, gaskets, conforming to IS: 13095 of following sizes as required. 80 mm dia
5
-
-
... More
Supplying, fixing, testing and commissioning of flanged butterfly valve PN 1.6, with Bronze/Gunmetal seat duly ISI marked complete with Nuts, Bolts, washers, gaskets, conforming to IS: 13095 of following sizes as required. 100 mm dia
8
-
-
... More
Providing and fixing brass GM/ ball valve (full bore type) with plastic coated lever and screwed female ends tested to 20 Kg/ cm2 of approved quality as specified. 50 mm dia
3
-
-
... More
Providing and fixing gunmetal single acting air release valve with screwedinlet 25 mm dia and with necessary G.I. coupling, valve to be fitted on topof Air vessel or on wet riser as per specification.
3
-
-
... More
Providing and fixing Flow switches suitable for fixing in 50mm to 150mm dia pipe line, complete with all accessories to provide indication in annunciator panel.
3
-
-
... More
Providing and fixing pressure switch with suitable for 1-10 Kg/cm2 including 12/15 mm Ø isolation valve, G.I. nipple, elbow, electrical connections setting of Cut-In and cut-Off pressure complete in all respects and in an approved manner.
3
-
-
... More
Supplying and installing pressure gauge of 100 mm Ø., 0-300 PSI or 0-21 kg per cm square fitted with 12/15 mm Ø. pad cock valve, and G.I. pipe, elbow etc. as per requirement in approved manner.
4
-
-
... More
Providing and fixing 15 mm dia, Quartzoid bulb type G.M. Sprinkler Head set to operate at 680C of approved make chrome plated complete in all respect as required. .
300
-
-
... More
Supplying and fixing swinging type First-Aid Hose Reel drum with MS construction spray painted in Post office Red colour, conforming to IS: 884 with upto date amendments, complete with brackets for fixing on wall, connections from riser with 25 mm dia MS/GI pipe and GM gate valve but excluding hose reel.
8
-
-
... More
Supplying and fixing 19mm dia 30 metre long high pressure polypropylene First-Aid Hose Reel.
5
-
-
... More
Supplying and fixing single headed internal hydrant valve with instantaneous Gun metal couplings of 63 mm dia with cast iron wheel ISI marked conforming to IS: 5290 (Type - A) with blank Gunmetal cap and chain as required.
5
-
-
... More
Supplying and fixing 63 mm dia, 15 mtr long RRL hose pipe with 63 mm dia Male and Female Stainless Steel-IS: 3444 Grade-1 couplings duly binded with GI wire, rivets etc. conforming to IS: 636 (Type -A) as required.
5
-
-
... More
Supplying & fixing 63 mm dia Stainless Steel IS: 3444 Grade-1 branch pipe with 20 mm dia (nominal internal) Gun Metal nozzle conforming to IS: 903, suitable for instantaneous coupling connection to connect hose pipe coupling as required.
4
-
-
... More
Supplying and fixing of MS hose cabinet box of made of 2 mm thick MS sheet and 40 x 40 x 5mm angle iron with front openable cover having 6 mm thick glazed glass viewing window i/c necessary locking arrangement, on existing wall/ brick platform etc complete as required Size 900 mm x 600 mm x 500 mm
5
-
-
... More
Supplying and fixing of MS hose cabinet box of made of 2 mm thick MS sheet and 40 x 40 x 5mm angle iron with front openable cover having 6 mm thick glazed glass viewing window i/c necessary locking arrangement, on existing wall/ brick platform etc complete as required Size 600 mm x 600 mm x 500 mm
46
-
-
... More
Supply and fixing 100 mm dia CI steiner in suction line from water tank complete.
4
-
-
... More
Supplying and fixing 2 way Fire Brigade Connection of cast iron body with 2 Nos. Gun metal male instantaneous inlet couplings complete with cap and chain conforming to IS: 904 including connection to existing MS pipe line complete as required.
6
-
-
... More
Providing and fixing standard fireman's axe (tested for 20000 Volts) with heavy insulated rubber handle. (ISI marked)
4
-
-
... More
Providing and fixing M.S. structural work fabricated from standard sections, (MS rounds, angles, channels etc.) including cutting to size, drilling welding including cost of steel fasteners, clamp in RCC structural members as directed, including two coat of enamel painting over one coat of red oxide primer complete.
250
-
-
... More
Supplying, fixing, testing and commissioning of flanged butterfly valve PN 1.6, with Bronze/Gunmetal seat duly ISI marked complete with Nuts, Bolts, washers, gaskets, conforming to IS: 13095 of following sizes as required.100mm dia mm dia. nominal bore
8
-
-
... More
Supplying, installation, testing and commissioning of electrical motor driven main pump of horizonatal centrifugal and suction back pull out type of cast iron body, bronze impeller, SS410 Shaft with mechanical seal and capable of deliver 1620 LPM at 70 MWC. The pump shall be couplled to TEFC Motor of Suitable 50 HP With Speed of 2875 RPM and Complete set shall mounted on Common BASE Frame. The Quoted rate shall include providing and fixing of couplling, couppling Gaurd, RCC Foundation( as Recommeded by Manufacturer) and Foundation Bolts Etc. (Make- Kirloskar)
2
-
-
... More
Supplying, installation, testing and commissioning of electrical motor driven Jockey pump of horizonatal centrifugal End suction closed couplled type of cast iron body, bronze impeller, SS410 Shaft with mechanical seal gland packing and capable to deliver 180 LPM at 70 MWC. The pump shall be couplled to TEFC Motor of Suitable HP With Speed of 2900 RPM and Complete set shall mounted on Common Base Frame. The Quoted rate shall include providing and fixing of couplling, couppling Gaurd, RCC Foundation ( as Recommeded by Manufacturer) and Foundation Bolts Etc. (Make- Kirloskar)
5
-
-
... More
Supplying, installation, testing and commissioning of Diesel Engine driven Common Standby Pump, horizonatal centrifugal End suction Back pull out type of cast iron body, bronze impeller, SS410 Shaft with mechanical seal and capable to deliver 16200 LPM at 70 MWC. The pump shall be couplled to Suitable 67HP of diesel Engine radiater water cool type with speed of 2150 RPM and Complete set shall mounted on Common Base Frame.12 vBatteries & Bbattery leads with stand, Fuel tANK (6 Hours oPERATION) with stand gauge Glass, fuel piping with valves. The Quoted rate shall include Radiater Water Coolingpiping( if Required) couppling Gaurd and other standard accessories, RCC Foundation ( as Recommeded by Manufacturer) and Foundation Bolts Etc. Complete.
(Make- Kirloskar)
(Make- Kirloskar)
3
-
-
... More
Supplying and fixing of following sizes steel conduit along with accessories in concealed complete as per specification
50
-
-
... More
Supplying and laying following sizes one number FRLS PVC insulated , PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade in existing masonry open duct as per specification, IS: 9537 (2000, Part 5). 3 x 10 sq. mm
30
-
-
... More
Suppying , installation , testing and commissioning of Fire alarm Control panel (UL Listed) suitable for 252 addressable points (Detector & Devices). Comprising of the following system components: Operating units, Periphery boards, Power upplies,System enclosures, with battery backup 24hours and 30minutes,
6
-
-
... More
Suppying , installation , testing and commissioning of Intelligent Addressable Type Manual Call Point:
Intelligent Manual Fire Alarm Box is constructed of durable, molded and polycarbonate material that is matte finished in red with raised white lettering Single-action,Pull-down lever is down, until manually reset,Polarity insensitive via SureWireTM technology
Intelligent Manual Fire Alarm Box is constructed of durable, molded and polycarbonate material that is matte finished in red with raised white lettering Single-action,Pull-down lever is down, until manually reset,Polarity insensitive via SureWireTM technology
8
-
-
... More
Suppying , installation , testing and commissioning of Conventional Type Hooter with Strobe:
Hooter with Strobe. Wall Mount models feature field selectable candela settings of 15/30/75/110cd and 135/185cd. Ceiling Mount models feature field selectable candela settings of 15/30/75/95cd and 115/177cd. UL Listed, ULC, FM approved. NFPA Compliant. Red.
Hooter with Strobe. Wall Mount models feature field selectable candela settings of 15/30/75/110cd and 135/185cd. Ceiling Mount models feature field selectable candela settings of 15/30/75/95cd and 115/177cd. UL Listed, ULC, FM approved. NFPA Compliant. Red.
40
-
-
... More
Suppying , installation , testing and commissioning of Intelligent Addressable Relay control module for Hooter Interfacing and supervising normally open (N.O) or normally closed (N.C) contacts,Integral single-pole, double-throw (SPDT) relay (up to 4 amps) ,Multi-color light-emitting diode (LED) indicates system status, UL Listed & ULC Listed; FM Approved
40
-
-
... More
Suppying , installation , testing and commissioning of 2 core x 1.5 sq.mm Armoured FRLS fire cable
50
-
-
... More
Supply and erecting of following ISI marked Fire extenguishers on wall/ column including erecting bracket etc complete.ABC Fire Extinguisher 9KG Nitrogen Store Pressure As per IS: 15683:2018 Body Sheet Not Less Then 2mm Thickness, CE Mark NRV Valve With ABC Powder 90% UL 299 FIRE RATING: 6A, 144B. With all accessories.
60
-
-
... More
Supply and erecting of following ISI marked Fire extenguishers on wall/ column including erecting bracket etc complete. CO2 type Fire Extinguisher ISI marked confirming to IS:15683:2018 Capacity 4.5Kg. INITIAL CHARGE:- Carbon dioxide used in extinguishers shall comply with IS 15222. FIRE RATING:- 55B. Complete with Hose Assembly and horn , locking arrangement, operation manual, bracket with two screw and sleeve
60
-
-
... More
Providing and planting of 3‟0” to 4‟0” heighted wasingtonia, filipheria/bismarkia novelist plam plants with 1‟6” x 1‟6” depth pit formation and soil preparation, (Mixing organic manure and plant‟s protection insecticide). Up to 4 month maintenance.
1000
-
-
... More
Excavation for roadway in soil using mechanical means including loading in tipper for carrying of cut earth to embankment site and unloading with all lifts and lead upto 1000 meters as per relevant clauses of section 300.
2904.13
-
-
... More
Compacting Original Ground Compacting Original Ground supporting embankment Loosening, leveling and compacting original ground to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at O.M.C. and then compacted by rolling so as to achieve minimum dry density as given in table 300-2 for embankment construction.
2315
-
-
... More
Construction of RCC open drain 0.60m x 0.60m inside dimension lined with 120 mm thick RCC M-20 walls, 120 mm thick CC M-20 foundation, over 100 mm thick (Av) leveling course in PCC M-15 including excavation , dressing of sides and bottom, provision of HYSD reinforcement consisting 8 mm die horizontal bars @ 150 mm c/c and L-shaped 8 mm die vertical bars @ 150 mm c/c (L= 800 mm) including cutting , bending and binding wire, placing in position , providing shuttering and concreting by using concrete mixer, compaction by vibration etc complete as per drawings and technical specifications.
1400
-
-
... More
Excavation for drain (Earth work in excavation for drain/chamber as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.)
1128.48
-
-
... More
Construction of RCC drain/chamber cover, placing in position, providing shuttering and concreting by using concrete mixer, compaction by vibration etc complete as per drawings and technical specifications excluding reinforcement. with RCC M-20
487.88
-
-
... More
Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in drain/cover/chamber complete as per Drawing and Technical Specifications.
45.51
-
-
... More
Providing and laying cement concrete for plain concrete/ reinforced concrete i/c form work, shuttering complete in as per drawings and specifications.( For Village roads)
159.94
-
-
... More
Compacting Original Ground supporting embankment Loosening, leveling and compacting original ground to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at O.M.C. and then compacted by rolling so as to achieve minimum dry density as given in table 300-2 for embankment construction.
877.5
-
-
... More
Construction of sub-grade with Material Obtained from Borrow Pits/Borrow Area (Construction of sub-grade with approved material/selected soil having C.B.R.>8 (unless specified otherwise in the contract) obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2)
3585
-
-
... More
Granular Sub-base as per Table:- 400-1 Construction of granular sub-base by providing graded Material,carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401 Plant mix method (with Mechanically crushed stone only) For Lower Sub-base with Grading-III Material
1792.5
-
-
... More
Granular Sub-base as per Table:- 400-1 Construction of granular sub-base by providing graded Material,carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401 Plant mix method (with Mechanically crushed stone only) For Sub-base cum drainage layer or upper sub-base with Grading-IV Material
877.5
-
-
... More
Dry Lean Cement Concrete Sub-base as per IRC:SP-49 (Construction of dry lean cement concrete Sub-base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 26.5 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days,mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller,finishing and curing as per clause 601.)
585
-
-
... More
Providing and laying three course damp proofing treatment in water reservoir, sump, tank etc., with bitumen felt and blown type petroleum bitumen at the rate of 1.6 Kg/sqm 1st, 3rd course and 2nd course with tar felt including applying priming coat at the rate of 0.25 litre per sqm and fillets and rounding corners, wherever required, complete. Bitumen felt of type 2 grade 2 (Fibre base)
750
-
-
... More
Cement Concrete Pavement (Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base, coarse and fine aggregate conforming to IS:383, and graded as per table 600-3, mixed as per approved mix design at site, laid, spread, vibrated, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, de-bonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing as per clause 602.) With Cement concrete grade M-30 and minimum cement content @ 375 kg/cum.
1170
-
-
... More
Trimix operation over RCC M-30 pumpable concrete i/c setting of channel shuttering online & level, vibrating concrete levelling with trimix surafcevibro with flooting and futher compaction with trimex skin fishing disc,machine trowelling using approved machinery before application of broom finshing the same, all complete including necessary curing, cutting the cured surface for contraction / exepansion joints and filling them with bitummen.
5850
-
-
... More
Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-1997. The finished surface to be level, uniform and free from streaks and holes.)
207.7
-
-
... More
Providing and laying of a reinforced cement concrete pipe duct,300 mm dia., across the road ( new construction ) , extending from drain to drain in cuts and toe of slopes to toe of slopes in fills,constructing head walls at both ends, providing a minimum fill of granular material over top and sides of RCC pipes as per IRC: 98- 2011, bedded on a 0.3 m thick layer of granular material free of rock pieces , outer to outer distance of pipes at least half dia of pipe subject to minimum 450 mm in case of double and triple row ducts , joints to be made leak proof, invert level of duct to be above higher than ground level to prevent entry of water and dirt, all as per IRC:98-2011 and approved drawings. Single row for one utility service
288
-
-
... More
Construction Of Sewerage Treatment Plant ( STP) Including all Required Machineries Designed by Contractor from Expertise Agency of Similar Work and Capacity Suitable For 152 Nos 3 BHK Flats , 48 Nos 2 BHK Flats, 80 Nos 1 BHK Flats and Community Hall complete In all Respect, Including Opration and Maintenance of Constructed STP For 5 Years From Date of Completion. Recycled Treated Water of STP Should be Supplied through pipe to the Gardens, Ultimate Disposal Point and Recharge Well, Residual Effluent of STP Should Be Disposed away From Site As Directed By Engineer In Charge
1
-
-
... More
Comprehensive and cost effective solid waste management solution System by Plastic Processing Machine (Capacity 1 Ton) and For Organic And Inorganic Waste Disposal ( Capacity 2.5 Ton) Collected by Vehicle From All Flats of Colony As per Attached Proposal and Establishing waste management yard with shed Including Opration and Maintenance of Constructed Solid Waste Management Processing Unit For 5 Years From Date of Completion..
1
-
-
... More
Supplying, installation, testing and commissioning of centrifugal type mono- block electric pump set for water supply system having following capacity three phase, 415 volts AC induction motor and pump including suitable channel iron base frame, suitable C.C foundation and connection of suction and delivery line etc. as per specification.
7.5 HP, 650 LPM, Minimum 40 m head, suction size 80 mm, delivery size 65 mm
7.5 HP, 650 LPM, Minimum 40 m head, suction size 80 mm, delivery size 65 mm
4
-
-
... More
Supplying, installation, testing and commissioning of centrifugal type mono- block electric pump set for water supply system having following capacity three phase, 415 volts AC induction motor and pump including suitable channel iron base frame, suitable C.C foundation and connection of suction and delivery line etc. as per specification.
10-15 HP, 650 LPM, Minimum 40 m head, suction size 80-100 mm, delivery size 65 mm.
10-15 HP, 650 LPM, Minimum 40 m head, suction size 80-100 mm, delivery size 65 mm.
4
-
-
... More
Supplying, installation, testing and commissioning of submersible pump set for water supply system with submersible motor directly coupled to multi- stage submersible pump of specified discharge capacity, head, delivery size in existing bore well including 2 sets of suitable size holding clamps made out of 50 mm X 6 mm MS flat, connection with suitable submersible cable of standard length etc. as per specification and IS: 694 (2010). Submersible cable should be rust proof, safe from oil/grease and under water chemical / Abrasion resistant including Suitable cable as required and starter Panel etc complete. 3 HP 3 Phase Pump
8
-
-
... More
Supplying, installation, testing and commissioning of submersible pump set for water supply system with submersible motor directly coupled to multi- stage submersible pump of specified discharge capacity, head, delivery size in existing bore well including 2 sets of suitable size holding clamps made out of 50 mm X 6 mm MS flat, connection with suitable submersible cable of standard length etc. as per specification and IS: 694 (2010). Submersible cable should be rust proof, safe from oil/grease and under water chemical / Abrasion resistant including Suitable cable as required and starter Panel etc complete. 5 HP 3 Phase Pump
8
-
-
... More
Supplying and fixing of following sizes 'B' class G I pipe with welded steel flange of suitable size at both the end of every pipe length, fixing with submersible pump and lowering with the pump in the bore well including necessary rubber gasket, nuts & bolts etc. as per specification.
100 mm
100 mm
200
-
-
... More
Supplying and fixing of following sizes 'B' class G I pipe with welded steel flange of suitable size at both the end of every pipe length, fixing with submersible pump and lowering with the pump in the bore well including necessary rubber gasket, nuts & bolts etc. as per specification.
80 mm
80 mm
220
-
-
... More
Supplying and fixing of following sizes 'B' class G I pipe with welded steel flange of suitable size at both the end of every pipe length, fixing with submersible pump and lowering with the pump in the bore well including necessary rubber gasket, nuts & bolts etc. as per specification.
50 mm
50 mm
660
-
-
... More
Supplying, laying and fixing following size submersible cable along with GI/PVC/HDFC pipe line or laid in ground etc as per specification and IS 694 (2010). Submersible cable should be rust proof, safe from oil/grease and under water chemical / Abrasion resistant.3x4.0 Sqmm
1120
-
-
... More
Supplying and making water proof joint with heat shrinkable joint kit including copper ferrules for following size of 3 core submersible copper conductor cable of 1.1 KV grade as per specification..3x4.0 Sqmm
4
-
-
... More
Supply, installation, testing and commissioning of 3-7.5 HP 3 phase submersible motor starter cum control wall/ floor mounted oil type made out of not less than 1.6 mm thick MS sheet and comprising of following panel mounting switchgears there in including connection inter-connection etc. as per specification.
a) Phase indicating lamps with fuses and toggle switches 1 set
b) 3/5/7.5 HP 3 phase DOL starter with over load and no volt relay 1 No
c) 32 A C curve TPMCB 1 No
d) Voltmeter 0-500 V with selector switch 1 set
e) Ammeter 0-10 A with CT's and selector switch 1 set.
a) Phase indicating lamps with fuses and toggle switches 1 set
b) 3/5/7.5 HP 3 phase DOL starter with over load and no volt relay 1 No
c) 32 A C curve TPMCB 1 No
d) Voltmeter 0-500 V with selector switch 1 set
e) Ammeter 0-10 A with CT's and selector switch 1 set.
5
-
-
... More
Supply, installation, testing and commissioning of 10-15 HP 3 phase centrifugal type mono- block electric pump starter cum control wall/ floor mounted oil type made out of not less than 1.6 mm thick MS sheet and comprising of following panel mounting switchgears there in including connection inter-connection etc. as per specification.
a) Phase indicating lamps with fuses and toggle switches 1 set
b) 10/15 HP 3 phase DOL starter with over load and no volt relay 1 No
c) 25 A
a) Phase indicating lamps with fuses and toggle switches 1 set
b) 10/15 HP 3 phase DOL starter with over load and no volt relay 1 No
c) 25 A
5
-
-
... More
Wiring for light/ fan/ exhaust fan / call bell point with 3x1.5 sqmm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) with 5/6 amp modular switch, modular base and cover plate, suitable size G.I. box, Ceiling Rose, Holder, Blanking Plate as per required and IS: 694 (2010), IS: 9537 (2000 Part 5) Make - PVC PIPE :- Polycab / Precision / Saraswati , Wire :- Polycab / Havells / RR Kabel & Switch, Socket and Accessories :- Havells (Verona) / Legrand (Mylinc) Short Point
2636
-
-
... More
Wiring for light/ fan/ exhaust fan / call bell point with 3x1.5 sqmm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) with 5/6 amp modular switch, modular base and cover plate, suitable size G.I. box, Ceiling Rose, Holder, Blanking Plate as per required and IS: 694 (2010), IS: 9537 (2000 Part 5) Make - PVC PIPE :- Polycab / Precision / Saraswati , Wire :- Polycab / Havells / RR Kabel & Switch, Socket and Accessories :- Havells (Verona) / Legrand (Mylinc) Medium Point
3021
-
-
... More
Wiring for light/ fan/ exhaust fan / call bell point with 3x1.5 sqmm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) with 5/6 amp modular switch, modular base and cover plate, suitable size G.I. box, Ceiling Rose, Holder, Blanking Plate as per required and IS: 694 (2010), IS: 9537 (2000 Part 5) Make - PVC PIPE :- Polycab / Precision / Saraswati , Wire :- Polycab / Havells / RR Kabel & Switch, Socket and Accessories :- Havells (Verona) / Legrand (Mylinc) Long Point
3956
-
-
... More
Wiring for twin control light point with 3x1.5 sqmm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) with 5/6 amp modular switch, modular base and cover plate, suitable size G.I. box as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Make - PVC PIPE :- Polycab / Precision / Saraswati , Wire :- Polycab / Havells / RR Kabel & Switch, Socket and Accessories :- Havells (Verona) / Legrand (Mylinc)
1229
-
-
... More
Extra for providing and fixing light plug point on board in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) point wiring with modular type 3 pin 5/6 amp socket outlet and 5/6 amp switch including cost of base and cover plate and G. I. box etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Make - Switch, Socket and Accessories :- Havells (Verona) / Legrand (Mylinc)
2886
-
-
... More
Wiring for light plug point with 3x2.5 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 6 Amp switch and 3 pin 6 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Make - PVC PIPE :- Polycab / Precision / Saraswati , Wire :- Polycab / Havells / RR Kabel & Switch, Socket and Accessories :- Havells (Verona) / Legrand (Mylinc) Medium Point
456
-
-
... More
Wiring for light plug point with 3x2.5 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 6 Amp switch and 3 pin 6 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Make - PVC PIPE :- Polycab / Precision / Saraswati , Wire :- Polycab / Havells / RR Kabel & Switch, Socket and Accessories :- Havells (Verona) / Legrand (Mylinc) Long Point
1692
-
-
... More
Wiring for light plug point with 3x2.5 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 6 Amp switch and 3 pin 6 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Make - PVC PIPE :- Polycab / Precision / Saraswati , Wire :- Polycab / Havells / RR Kabel & Switch, Socket and Accessories :- Havells (Verona) / Legrand (Mylinc) Extra Long Point I
691
-
-
... More
Wiring for light plug point with 3x2.5 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 6 Amp switch and 3 pin 6 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Make - PVC PIPE :- Polycab / Precision / Saraswati , Wire :- Polycab / Havells / RR Kabel & Switch, Socket and Accessories :- Havells (Verona) / Legrand (Mylinc) Extra Long Point II
34
-
-
... More
Wiring for power plug point with 3x4 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 16 Amp switch and 6 pin 16 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Make - PVC PIPE :- Polycab / Precision / Saraswati , Wire :- Polycab / Havells / RR Kabel & Switch, Socket and Accessories :- Havells (Verona) / Legrand (Mylinc) Medium Point
2
-
-
... More
Wiring for power plug point with 3x4 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 16 Amp switch and 6 pin 16 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Make - PVC PIPE :- Polycab / Precision / Saraswati , Wire :- Polycab / Havells / RR Kabel & Switch, Socket and Accessories :- Havells (Verona) / Legrand (Mylinc) Long Point
399
-
-
... More
Wiring for power plug point with 3x4 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 16 Amp switch and 6 pin 16 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Make - PVC PIPE :- Polycab / Precision / Saraswati , Wire :- Polycab / Havells / RR Kabel & Switch, Socket and Accessories :- Havells (Verona) / Legrand (Mylinc) Extra Long Point I
527
-
-
... More
Wiring for power plug point with 3x4 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 16 Amp switch and 6 pin 16 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Make - PVC PIPE :- Polycab / Precision / Saraswati , Wire :- Polycab / Havells / RR Kabel & Switch, Socket and Accessories :- Havells (Verona) / Legrand (Mylinc) Extra Long Point II
582
-
-
... More
Wiring for power plug point with 3x4 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 16 Amp switch and 6 pin 16 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Make - PVC PIPE :- Polycab / Precision / Saraswati , Wire :- Polycab / Havells / RR Kabel & Switch, Socket and Accessories :- Havells (Verona) / Legrand (Mylinc) Extra Long Point III
154
-
-
... More
Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core wire in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Make - PVC PIPE :- Polycab / Precision / Saraswati & Wire :- Polycab / Havells / RR Kabel, 1 X 1.5 sq. mm in 20mm conduit
3850
-
-
... More
Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core wire in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Make - PVC PIPE :- Polycab / Precision / Saraswati & Wire :- Polycab / Havells / RR Kabel, 3 X 2.5 sq. mm in 20mm conduit
28442
-
-
... More
Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core wire in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Make - PVC PIPE :- Polycab / Precision / Saraswati & Wire :- Polycab / Havells / RR Kabel, 6 X 2.5 sq. mm in 25mm conduit
10950
-
-
... More
Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core wire in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Make - PVC PIPE :- Polycab / Precision / Saraswati & Wire :- Polycab / Havells / RR Kabel, 3 X 4 sq. mm in 25mm conduit
100
-
-
... More
Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core wire in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Make - PVC PIPE :- Polycab / Precision / Saraswati & Wire :- Polycab / Havells / RR Kabel, 3 X 6 sq. mm in 25mm conduit
3200
-
-
... More
Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core wire in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Make - PVC PIPE :- Polycab / Precision / Saraswati & Wire :- Polycab / Havells / RR Kabel , 3 X 10 sq. mm in 40mm conduit
1845
-
-
... More
Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core wire in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Make - PVC PIPE :- Polycab / Precision / Saraswati & Wire :- Polycab / Havells / RR Kabel, 6 X 6 sq. mm in32 mm conduit
725
-
-
... More
Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core wire in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Make - PVC PIPE :- Polycab / Precision / Saraswati & Wire :- Polycab / Havells / RR Kabel , 6 X 10 sq.mm in 40mm conduit
10450
-
-
... More
Supplying and fixing of following sizes FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with accessories in concealed complete as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Make - PVC PIPE :- Polycab / Precision / Saraswati , 25 mm
14530
-
-
... More
Supplying and drawing following grade co-axial TV wire FRLS PVC insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ concealed Steel/PVC conduit as per specification and IS: 694 (2010) Make - Polycab / Havells / RR Kabel, RG-6 grade
17020
-
-
... More
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as per specification. Make - Switch, Socket and Accessories :- Havells (Verona) / Legrand (Mylinc), 75mmX75mm (1/2 Module)
498
-
-
... More
Supplying and fixing following modular switch, socket, other accessories on the existing modular plate & switch box including connections but excluding modular plate etc. as per specification. Make - Switch, Socket and Accessories :- Havells (Verona) / Legrand (Mylinc) , Fan regulator (Two module size) electronic stepped type moving all rounds
1576
-
-
... More
Supplying and fixing following modular switch, socket, other accessories on the existing modular plate & switch box including connections but excluding modular plate etc. as per specification. Make - Switch, Socket and Accessories :- Havells (Verona) / Legrand (Mylinc) , T.V. antenna socket outlet
498
-
-
... More
Supplying and fixing following modular switch, socket, other accessories on the existing modular plate & switch box including connections but excluding modular plate etc. as per specification. Make - Switch, Socket and Accessories :- Havells (Verona) / Legrand (Mylinc) , 25/32 amp A.C. Starter switch
602
-
-
... More
Providing and fixing round/ hexagonal fan box (125mm dia) depth 75mm (max.) with 12mm dia steel bar hook, 1.6mm thick MS sheet cover, in RCC slab etc. as per specification.
1576
-
-
... More
Providing and fixing phenolic laminated sheet cover of 180 mm dia 3 mm thick on the fan box etc. as per specification. (If provided at the time of installation of celing fan)
1576
-
-
... More
Supplying and fixing on surface/recess following way, 240 volts SP&N MCB distribution board of sheet steel phosphatized and powder painted complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, including interconnections, earthing etc. as per specification. (But without MCB/RCCB/Isolator) Make - Legrand / Havells , 4 way Double door
1
-
-
... More
Supplying and fixing on surface/recess following way, 240 volts SP&N MCB distribution board of sheet steel phosphatized and powder painted complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, including interconnections, earthing etc. as per specification. (But without MCB/RCCB/Isolator) Make - Legrand / Havells , 8 way Double door
126
-
-
... More
Supplying and fixing on surface/ recess horizontal type following way, 415 volts, TPN MCB distribution board of sheet steel phosphatized and powder painted, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, including inter connections, earthing etc. as per specification. (But without MCB / RCCB / Isolator. Make - Legrand / Havells , 4 way Double door
60
-
-
... More
Supplying and fixing on surface/ recess horizontal type following way, 415 volts, TPN MCB distribution board of sheet steel phosphatized and powder painted, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, including inter connections, earthing etc. as per specification. (But without MCB / RCCB / Isolator. Make - Legrand / Havells , 6 way Double door
170
-
-
... More
Supplying and fixing SP MCB, 240 volts, 'C' curve, suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. Make - Legrand / Havells , 6 Amps to 32 Amps
4266
-
-
... More
Supplying and fixing DP MCB, 240 volts, 'C' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. Make - Legrand / Havells , 6 amps to 32 amps
127
-
-
... More
Supplying and fixing TP&N MCB, 440 volts, 'C'curve, suitable for lighting and other load sin the existing MCB DB complete with connections, testing and commissioning etc. as perspecification. Make - Legrand / Havells , 63 Amp
230
-
-
... More
Supplying and laying HDPE pipe of 4kg/sqcm in ground below road, path etc at a depth not less than 40 cm and upto 90 cm including excavation, dismantling of road if required and refilling the trench with excavated material, ramming and making the surface good etc. as per specification. Make - Kisan (KSR) / Supreme / Finolex , 200 mm outer dia
2971
-
-
... More
Supplying, installation, testing and commissioning of following sizes ceiling fan including wiring the down rods of standard length up to 30 cm with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, earthing etc. complete as required. P.F. should be greater than 0.9, with BEE Star rating from 3 star and above, IS: 374:2019 including all amendments. Make - Usha / Havells / Crompton , 1200 mm sweep
84
-
-
... More
Supplying, fixing, testing and commissioning of following LED lamps with inbuilt electronic driver heat sink and all other accessories in existing holder/ luminaries as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens/watt. Make - Havells / Wipro / Halonix / Philips / Syska , 9 Watt
19
-
-
... More
Supplying, Installation, testing and commissioning of following LED tube light fitting including batten with Electronic Driver Heat sink Capecitor complete with all other accessories on surface/in false ceiling, including connection, earthing etc complete as per specification and IP20.P.F. should be greater than 0.9 LED chip efficacy ratio ≥ 100 Lumens/watt. Make - Havells / Wipro / Halonix / Philips / Syska , 18/20 watt (4 feet)
754
-
-
... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ concealed conduit/ submain wiring/ cable as per specification.
930
-
-
... More
Providing maintenance free earthing with following size GI pipe including making bore pit of minimum 150 mm dia, providing and laying approved make Earthing Electrode of Pipe-in-Pipe technology as per IS 3043-1987 made of corrosion free G.I. Pipe shaving outer pipe of 80 mm dia and inner pipe of 50 mm dia and filling with specified qty highly conductive compound around pipe and above that with soft soil in bore pit complete and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. as per specification., With 2 meter long GI Pipes and 25 kg back filling compound.
24
-
-
... More
Supplying and laying following sizes one number FRLS PVC insulated , PVC sheathed, unarmoured, aluminium conductor power cable of 1.1 KV grade on surface/ existing cable tray with 1 mm thick GI saddle as per specification, IS: 9537 (2000, Part 5). Polycab / Havells / KEI , 2 X 6 SQ. MM
1242
-
-
... More
Suppy, installation, testing & commissitioning and putting into operation and final testing of automatic lift complete with ARD and all standard equipments, accessories and control equipments as per manufacturer's design and as per CPWD specification (Part III LIFTS) and fulfilling following requirments on turn key basis. Make - Thyssen Krupp / Kone / Schindler
A. Type : Passenger lift
B. Load : 8 passenger/ 544 Kg
C. Speed : 1.0 metre per second
D. Contol : AC2
E. Operation : Microprosser based simplex collective selective with/without lift attendent
F. Total rise : About 9 mtrs
G. Landings : 4 All on same side
H. Floors served : G,1,2,3
I. Signals : Digital car position indicator, car travel direction indicator in car & at all landings
J. Lift shaft size : About 1900 mm width X 1900 mm depth, finished with plaster
K. Lift car size : About 1300 mm width X 1100 mm depth
L. Car entrance : Minimum Clear opening 800 mm wide X 2000 mm high protected with car door
M. Landing entrance: Clear opening 800 mm wide X 2000 mm high protected with landing door
N. Car door : Stainless steel/Glass Door two pannel telescopic/centre opening flush type
O. Landing door : Stainless steel/Glass Door two pannel telescopic/centre opening flush type
P. Door operation: Automatic electric power operated door with infra red protection
Q. Car interior : Stainless steel pannel with hair line/ mirror/moon rock finish on all sides
R. Car floor : Hard wood covered with PVC/ marblex tiles
S. Car ceiling & lighting : Fluorscent lighting concealed by suspended false ceiling with plain acrylic diffuser. The frame of suspended false ceiling shall be of powder coated aluminium
T. Car ventilation : Pressure fan with anodised aluminium grill
U. Emergency lighting in car: Battery operated Emergency lighting in the lift car
V. Intercom system : Battery operated Intercom system in lift car, machine room and control room
W. Emergency alarm : Battery operated alarm bell system in lift car & contol room
X. Position of machine room: Directly above the lift shaft
Y. Electric power supply : AC 415 Volts 3 phase 50 Hz terminated in machine room
Z. Fire man switch : Fire man switch at main landing termanal (The contractor will be responsible for approval of line route installation & Charging permision from CG Licensing Board With 05 year Maintenance including replacement of defect/damaged material no any payment given by CGHB terms and condition are enclosed)
A. Type : Passenger lift
B. Load : 8 passenger/ 544 Kg
C. Speed : 1.0 metre per second
D. Contol : AC2
E. Operation : Microprosser based simplex collective selective with/without lift attendent
F. Total rise : About 9 mtrs
G. Landings : 4 All on same side
H. Floors served : G,1,2,3
I. Signals : Digital car position indicator, car travel direction indicator in car & at all landings
J. Lift shaft size : About 1900 mm width X 1900 mm depth, finished with plaster
K. Lift car size : About 1300 mm width X 1100 mm depth
L. Car entrance : Minimum Clear opening 800 mm wide X 2000 mm high protected with car door
M. Landing entrance: Clear opening 800 mm wide X 2000 mm high protected with landing door
N. Car door : Stainless steel/Glass Door two pannel telescopic/centre opening flush type
O. Landing door : Stainless steel/Glass Door two pannel telescopic/centre opening flush type
P. Door operation: Automatic electric power operated door with infra red protection
Q. Car interior : Stainless steel pannel with hair line/ mirror/moon rock finish on all sides
R. Car floor : Hard wood covered with PVC/ marblex tiles
S. Car ceiling & lighting : Fluorscent lighting concealed by suspended false ceiling with plain acrylic diffuser. The frame of suspended false ceiling shall be of powder coated aluminium
T. Car ventilation : Pressure fan with anodised aluminium grill
U. Emergency lighting in car: Battery operated Emergency lighting in the lift car
V. Intercom system : Battery operated Intercom system in lift car, machine room and control room
W. Emergency alarm : Battery operated alarm bell system in lift car & contol room
X. Position of machine room: Directly above the lift shaft
Y. Electric power supply : AC 415 Volts 3 phase 50 Hz terminated in machine room
Z. Fire man switch : Fire man switch at main landing termanal (The contractor will be responsible for approval of line route installation & Charging permision from CG Licensing Board With 05 year Maintenance including replacement of defect/damaged material no any payment given by CGHB terms and condition are enclosed)
6
-
-
... More
Add or deduct for providing all additional parts/ equipments or for enhancing the capacity of parts/ equipments in automatic lift for 8 persons, speed 1.0 m/sec for every additional floor beyond initial G+3 floors.
30
-
-
... More
Suppy, installation, testing & commissitioning and putting into operation and final testing of automatic lift complete with ARD and all standard equipments, accessories and control equipments as per manufacturer's design and as per CPWD specification (Part III LIFTS) 1981and fulfilling following requirments on turn key basis. Make - Thyssen Krupp / Kone / Schindler
A. Type : Passenger lift
B. Load : 13 passenger/ 884 Kg
C. Speed : 1.0 metre per second
D. Contol : AC2
E. Operation : Microprosser based simplex collective selective with/without lift attendent
F. Total rise : About 9 mtrs
G. Landings : 4 All on same side
H. Floors served : G,1,2,3
I. Signals : Digital car position indicator, car travel direction indicator in car & at all landings
J. Lift shaft size : About 2500 mm width X 1900 mm depth, finished with plaster (size as per actual site conditions)
K. Lift car size : About 2000 mm width X 1100 mm depth
L. Car entrance : Minimum Clear opening 900 mm wide X 2000 mm high protected with car door
M. Landing entrance: Clear opening 900 mm wide X 2000 mm high protected with landing door
N. Car door : Stainless steel/Glass Door two pannel telescopic/centre opening flush type
O. Landing door : Stainless steel/Glass Door two pannel centre opening flush type
P. Door operation: Automatic electric power operated door with infra red protection
Q. Car interior : Stainless steel pannel with hair line/ mirror/moon rock finish on all sides
R. Car floor : Hard wood covered with PVC/ marblex tiles
S. Car ceiling & lighting : Fluorscent lighting concealed by suspended false ceiling with plain acrylic diffuser. The frame of suspended false ceiling shall be of powder coated aluminium
T. Car ventilation : Pressure fan with anodised aluminium grill
U. Emergency lighting in car: Battery operated Emergency lighting in the lift car
V. Intercom system : Battery operated Intercom system in lift car, machine room and control room
W. Emergency alarm : Battery operated alarm bell system in lift car & contol room
X. Position of machine room: Directly above the lift shaft
Y. Electric power supply : AC 415 Volts 3 phase 50 Hz terminated in machine room
Z. Fire man switch : Fire man switch at main landing termanal (The contractor will be responsible for approval of line route installation & Charging permision from CG Licensing Board With 05 year Maintanance including replacement of defect/damaged material no any payment given by CGHB terms and condition are enclosed)
A. Type : Passenger lift
B. Load : 13 passenger/ 884 Kg
C. Speed : 1.0 metre per second
D. Contol : AC2
E. Operation : Microprosser based simplex collective selective with/without lift attendent
F. Total rise : About 9 mtrs
G. Landings : 4 All on same side
H. Floors served : G,1,2,3
I. Signals : Digital car position indicator, car travel direction indicator in car & at all landings
J. Lift shaft size : About 2500 mm width X 1900 mm depth, finished with plaster (size as per actual site conditions)
K. Lift car size : About 2000 mm width X 1100 mm depth
L. Car entrance : Minimum Clear opening 900 mm wide X 2000 mm high protected with car door
M. Landing entrance: Clear opening 900 mm wide X 2000 mm high protected with landing door
N. Car door : Stainless steel/Glass Door two pannel telescopic/centre opening flush type
O. Landing door : Stainless steel/Glass Door two pannel centre opening flush type
P. Door operation: Automatic electric power operated door with infra red protection
Q. Car interior : Stainless steel pannel with hair line/ mirror/moon rock finish on all sides
R. Car floor : Hard wood covered with PVC/ marblex tiles
S. Car ceiling & lighting : Fluorscent lighting concealed by suspended false ceiling with plain acrylic diffuser. The frame of suspended false ceiling shall be of powder coated aluminium
T. Car ventilation : Pressure fan with anodised aluminium grill
U. Emergency lighting in car: Battery operated Emergency lighting in the lift car
V. Intercom system : Battery operated Intercom system in lift car, machine room and control room
W. Emergency alarm : Battery operated alarm bell system in lift car & contol room
X. Position of machine room: Directly above the lift shaft
Y. Electric power supply : AC 415 Volts 3 phase 50 Hz terminated in machine room
Z. Fire man switch : Fire man switch at main landing termanal (The contractor will be responsible for approval of line route installation & Charging permision from CG Licensing Board With 05 year Maintanance including replacement of defect/damaged material no any payment given by CGHB terms and condition are enclosed)
7
-
-
... More
Add or deduct for providing all additional parts/ equipments or for enhancing the capacity of parts/ equipments in automatic lift for 13 persons, speed 1.0 m/sec for every additional floor beyond initial G+3 floors.
36
-
-
... More
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. Make - Legrand / Havells , 63 amps
13
-
-
... More
Supplying and fixing DP MCB, 240 volts, 'D' curve, suitable for inductive/ motor load in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. Make - Legrand / Havells , 40 amps
13
-
-
... More
Supplying, installation, testing and commissioning of following LED Bulk Head fitting complete with Electronic Driver Heat sink Capacitor and all other accessories, including connection, earthing etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. IP65 Make - Havells / Wipro / Halonix / Philips / Syska , 10 watt
137
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements