Boards Tenders

Details: Providing BT surface at Athoor Main street - 160001R001,NHAI to Kurinji Nagar Main road 160001R035,A type Cross street (Police house south) 160001R037,Kurinji Nagar B type Main North street 160001R038, Kurinji Nagar B type Main East street 160001R039,Kurinji Nagar B type East to North joint street 160001R040,Kurinji Nagar C type Vinayagar temple to VAO house street 160001R043, Kurinji Nagar C type Sump Round street 160001R044 , sathiya nagar to housing board join street 160005R179, Sathiya Nagar to APP Nagar main streets 160005R186, APP Nagar Main Street 160006R220 , APP Nagar East 1st cross street 160006R221,APP Nagar 1st Main West 2nd cross street 160006R226,APP Nagar 1st Main West 4th cross street 160006R228, APP Nagar 1st Main West 5th cross street 160006R229, APP Nagar 1st Main West 6th cross street 160006R230 ,APP Nagar 1st Main West 7th cross street 160006R231,APP Nagar West Main 2nd cross street 160006R232,APP Nagar 3rd Main West 1st cross street 160006R235,,Dharapuram road to thummichampatty main road 160013R451,Kairasi Nagar East Main street 160014R475, in Oddanchatram Municipality

Details: Supply Of Switch Board Cabinet For Lhb Eog Ac Coaches To Rdso Specn.no.rd so/pe/spec/ac/0184-2015 (rev-1). Note: I) Mpcb#s For Water Pumps 1&2, Condenser & Ventilation Fan motors Ratings Shall Be Provided As Per Rdso Ltr.no.el/7.1.108/sbc Dt.01-05-2023. Ii) The Compressors , Heater Circuits Wiring Shall Be Provided With 4 Sq.mm Cable & Suitable Cage Clamp Terminal Blocks For 4sq.mm Cable (block Nos. 239-241, 243-245, 259-261, 263-265, 242 & 262). Rbc & Ebc (s1f160 & S1f 170) Circuit Wiring Shall Be Provided With 6sq.mm Cable And Suitable Cage Clamp Terminal Blocks (in S1 x3) For 6sq.mm Cable. Iii) Mounting Details For Rmpu Switch Panel & Stiffeners Shall Be Provided As Per drawing No. Icf/sk3-7-2-062 Alt- A Or Latest. Iv) 8 Nos Of Crimping Sockets Shall Be Supplied With Discon necting & Earthing Device As Follows. A) For Schaltbau Make D&e Device Crimping Sockets To Drg. No. icf/sk-7-2-166 Alt-w, Type-d10/38, Bend-90 Degree. B) For Salzer Make D&e Device Crimping Sockets T o Item-10 Of Edts-200 (latest). V) Note.no-4 In Rdso Drg.no.rdso/pe/sk/0205-2019 (rev-1) Sheet 2 Of 16 Shall Be Read As #pg29 Suitable End Fitting For Power & Control Cables Shall Be Used#. Vi) Packing In struction: Pi-115 Ver. 3.0

Description: CATEGORY: Aggregate 12 point 50mm , Bricks B class , Aluminium door handle100mm , Plywood 8 feet x 4 feet 4mm thick , Plywood BWR 8 feet x 9 feet x 18 or 19 mm , CP 2 way angle valve 15mm , CP over head square Shower rose 15 mm with arms , Aluminium sliding door bolt 250mm , CP Towel rail 600 mm long with pipe 20 mm dia , Lid for Sintex for 500 ltr , Hydraulic door closer Aluminium Die Cast body weight between 36 to 60 Kg , Aluminium Tower bolt 150mm , Float Valve 15mm symet complete , Glass pane 4mm thick froasted , Curtain rod brackets , SS Curtain rod knobs , EWC seat cover colour white , Kitchen Plate rack Stainless Steel 24 inch x 24 inch x 10 inch , GI Pipe medium grade 20mm , WHB miror Aluminum Frame 600x450 mm bevelled as mirror mounted on 6 mm thick AC building board , Steel wire cloth 0 point 36mm nominal dia , CPVC pipe 20mm outer diameter , CPVC Elbow 20mm outer diameter , CPVC Tee 20mm outer diameter , MS Hasp and Staple wire type stove enamelled 100mm size , GI Union 15mm dia , Door magnetic Catcher , GI Socket 15mm dia , GI Tee 20mm dia , Butt hinges 100mm steel , Butt hinges 100mm MS , Butt hinges 75mm SS , MS Hasp and Staple wire type stove enamelled 75mm size , M.S Screws 1 and half inch , Nails 1 and half inch , Nails 3 oblique 4 inch long 100gram , Nails 1 inch long 100 gm , MS Screws 1 inch 100 Gram , MS Screws 2 inch 100 gram , M Seal 100gm Pkt , MS Screws half inch 100 gm pkt , Steel Screws 8 oblique 19 of 100 Gram pkt , Nail 2 inch long 100 gm pkt , Steel Screws 1 inch 100 Gram pkt , GI Tubing 25mm Bore med Gde , GI Tubing 50mm Bore med Gde , GI Tubing 20mm bore med grade , Cable jointing kit for 11 KV Earthed grade heat shrink type joint complete with jointing materials Outdoor 3 C x 95 Sqmm 11 KV E , Cable jointing kit for 11 KV EartheD grade heat shrink type joint complete with jointing materials Indoor 3 C x 95 Sqmm 11 KV E , LED lumininare 600 mm x 600 mm 36W 220 v AC recessed type with high efficiency with PMMA diffuser with driver holders and LED Lamp , LED Driver for 2 feet x 2 feet for recessed Light Fitting 36W , MCB SPN 32 Amp Volts 10KA , FRLS copper conductor cables 4 sqmm Multistranded Single core 1100 V , FRLS copper conductor cables 1 point 5 sqmm Multistranded Single core 1100 V , PVC Flexible Cable 23 oblique 0 point 0076 twin core , Tape PVC Adhesive 20 mm x 25 Mtr , FRLS copper conductor cables 0 point 50 sqmm 3 core 1100 V , LED street light fittings 90 W 230 V AC Outdoor type , LED flood light fittings 50 W 230 V AC Outdoor type , LED street light fittings 60 oblique 70 W 230 V AC Outdoor type , Sluice Valve 80mm PN 1 point 6 , Gate Valve 40 mm GM , Gate Valve 25mm GM , Gate valve GM 20mm , MCCB 100 4P 16KA 415 V adjustable thermal magnetic release , Heating element 1500 Watt Triangular Type , Heating element 2000 Watt Triangular Type , Thermostat for Geyser 25 ltr , MCB SP 16 Amp 230 Volts 10KA , Holder Angular PVC BKL , FRLS copper conductor cables 2 point 5 sqmm Multistranded Single core 1100 V , MCB SPN 16 Amp Volts 10KA 230V , Holder batten PVC BKL , PVC Connection pipe brass headed 15X450mm , Tape PVC Adhesive 15 mm x 25 Mtr , Plug Top 15 A 3 Pin 230 V , Fan Regulator Switch Type , Sheet metal enclosure with plug top and MCB SP 20A , Modular Socket with MCB SP 25A , Flame Proof weather proof Rotary Switch with Cable Termination Box in LM6 16A Single Pole ON dash OFF , Flame Proof light fittting LED light fitting 1x16 Watt

Description: CATEGORY: Rear inner bearing Bolero , Rear outer bearing Bolero , Clutch plate Tata 1512 , Rear hub oil seal Bolero , Front hub inner bearing Bolero , Front hub outer bearing Bolero , Pressure plate with release Bearing Tata 1512 , Front hub oil seal Bolero , Rear shocker assy Tata Safari , Flasher unit 8 pin 12 volt Bolero , Brake Mcylinder Bolero , Rear main leaf Bolero , Centre bolt Bolero , U bolt Bolero , shackle pin leaf Bolero , Front brake caliper assy Bolero , Brake pipe rear l MGypsy , Speedometer cable assy MGypsy , Fuel pump motor Denso MGypsy , Fuel return vacuum valve MGypsy , Rear seat complete MGypsy Soft Top , Buffer pad LH RH SML Truck , Fuel filter 1 Ltr SML Truck , Steering bush SML Truck , Rear bearing Part No U 497 Tata sumo Gold , Axle seal Tata sumo Gold , Head light assy LS Tata sumo Gold , Exhaust brake pipe Tata 5Xton , Judgment rod Tata 5 xton , Steering gear box oil seal Tata 1212 TC , Front shock absorber LR Tata 5xton , Jumping rod bush kit force Ambulance , Engine oil filter New Holland Tractor , Hydraulic oil filter New Holland Tractor , Fuel filter set New Holland Tractor , Cabin rubber buffer pad Tata LPTA 715 , Helmet MCycle , Air filter Ashok Leyland , Front differential oil seal MandM scorpio , Air filter MandM scorpio , Oil filter MandM scorpio , Disc pad front MandM scorpio , Turbo charger Tata Sumo , Split bulb 24 Volts , Wheel stud with nut MandM scorpio S10 , Steering oil seal Scorpio10 , Throttle body MGypsy MPFI , Throttle body packing , Steering oil seal Tata 713 LPTA , Idle speed motor actuator MGypsy MPFI , TPS sensor MGypsy MPFI , Propeller shaft centre bearing Force Ambulance , Steering gear box oil seal Tata 715 LPT , Front hub with bearing Scorpio S10 , U J Cross MGypsy , Disc pad front Scorpio N , Oil seal front Tata 110 133 12 , Axle oil seal Tata 1212TC 4x4 , Check nut lock washer front Tata 1212 4x4 , Check nut lock washer rear Tata 1212 4x4 , Check nut Tata 1212 4X4 , Steering gear box oil seal Tata 1613 , Kit shoe hold down Tata sumo , Flasher unit 12 volts SML 3500 , Emery paper cloth type fine , Cold patch solution , Bulb 67 No 12 volt , Bulb 2441 24 volt , Bulb 67 No 24 Volt , Head light relay 12 volt , Flasher unit 24Volts Tata , Pull and push switch , Head light bulb 24 volt , U bolt washer , Bulb 1141 12 volt , Wheel cylinder rear Brake Scorpio S10 , Nut bolt TVS 10 12 14 16 18 20 22 No , Grease nipple big , Grease nipple small , Welding rod 10 SWG , Welding rod 08 SWG , Tube less puncher kit , Horn 12 volt Minda , Horn 24 volt Minda , M seal , Paint red , Rim paint , Brake adjuster kit Scorpio , Paint green , Ana bond , Red oxide primer , White paint , Paint black , Clamp small , Side mirror L R side Tata , Banjo bolt 19 Nos , Solution SR 505 , Steel screw 1 inch Chinese , Head light bulb 12 volt , Retro reflective tape yellow , Retro reflective tape red , Retro reflective tape white , Silicon tube , Flexible pipe rubber 19 No dia , Flexible pipe rubber 22 No dia , N C Thinner , Dash board polish , Fuse Small 10 15 20 25 , Alloy wheel Scorpio , Oil seal front SML 4X2 , Oil seal rear Tata Sumo , King pin Lower Tata 1212 4x4 , Oil seal front Tata 1613 , Oil seal rear Tata 1613 In out , Oil seal rear Tata 1212 In out , Spring washer 12 17 No , Fog light assy , Fog light bulb 12V , Fog light bulb 24V , T monogram , Araldite , Split pin various size , Banjo washer 12 14 17 Nos , Shocker assy Force Ambulance , UJ cross Scorpio

Description: CATEGORY: LED Inverator Batten 25 watt 5700 kA or 6000 kA aluminium incl 25 watt inbuilt li ion battery for 4 hours backup , LED Inverator Batten 30 watt 6300 kA 6500 kA aluminium incl 30 watt inbuilt li ion battery for 4 hours backup , Switch change over switch 4 pole 100 Amp , LED street light 90 watt inverter di mmable IR Sensor inbuilt Li ion battery for 1 point 5 hours backup , Led Inverter Street Light 60 Watt , Frame plate 6 Module , Frame plate with matching cover plate 18 Modular , Switch board boxes 6 Modular , GI Elbow 50 mm , GI Nipple medium grade 40 mm dia , Frame plate with matching cover plate 12 Modular , GI Tee 40 mm , Frame plate 8 Module , GI Nipple medium grade 50 mm dia x 150 mm , PVC Gang box 6 Amp , Ceilling rose , GI Nipple 40 x 100 mm , GI Elbow 40 mm , Thermostat switch for geyser , GI Socket 40 mm , Frame plate 3 Module , Frame plate with matching cover plate 2 Modular , GI Elbow 80 mm , GI Socket 80 mm , Plug Metal clad 20 Amp , GI Elbow 20 mm , Frame plate 4 Module , GI Elbow 25 mm , PVC Gang box 5 Amp , GI Nipple 40 x 50 mm long , Thimble copper of size 150 sqmm , Blanking plate , Bulb 100 watt for test lamp , Cement in 50 kg pack , Sand , GI Pipe 20 mm ISI Mark , Cover for PVC Water Storage Tank 1000 Ltrs , GI Pipe 15mm ISI Mark , PTMT Float Valves Size 15 mm with rod and ball , PVC Pipe Size 75 mm , PVC Pipe Size 50 mm , PVC Bend Size 75mm , Bracket SS , GI Nipple 20 x 150 mm , GI Nipple 20 x 100 mm , PVC Bend Size 100mm , GI Nipple 15 x 150 mm long , Glass Sheet Frosted 600 mm x 1200 mm x 3 point 8 mm , GI Nipple 15 x 100 mm long , GI Union 20 mm , GI Female Tee 20 x 20 x 15 mm , GI Nipple 20 x 50 mm long , GI Nipple 15 x 225 mm long , GI Nipple 15 x 50 mm long , 15mm dia Kitec union , White cement in 1 Kg Pack , GI Socket 20 mm , GI Reducing elbow 25 mm x 15 mm , Mortice lock ISI Marked for aluminium door , GI Tee Size 15 mm dia , GI Nipple 20 x 225 mm long , M Seal 90 gm pkt , Magnetic catcher , GI Elbow 20 mm x 20 mm , Washer for spindles , Black Nails 1 inch 2 inch 1 point 5 inch , Screw wood steel 20mm , Plywood commercial of size 8 feet x 4 feet x 12 mm thick , Sofa CushionSize 22 feet x 21 feet x 4 feet in 32 density , Plywood commercial BWR 8 feet x 4 feet x 4 mm , Plywood size 8 feet x 4 feet x 6 mm , GI Elbow 32mm 3 way ISI Mark , Plywood commercial BWR 7 feet x 4 feet x 9 mm , Plywood one teak face of size 8 feet x 4 feet x 6 mm thick , Paint brush 100 mm of superior quality , Paint synthetic enamelled OG 1st quality 04 ltr packing , Plywood size 8 feet x 4 feet x thickness 6 mm , Fevicol in 1 kg SR packing , Plywood commercial of size 8 feet x 4 feet x 3 mm thick , Malmal cloth best quality , Cane plastic 4 mm , Cane plastic 2 mm , Fevicol in 1 kg SH packing , Paint synthetic enemelled of first quality in 4ltr packing of black colour , Nails tack cut black pkt of 2 point 5 kgs , Thinner in 5 ltr packing , Nails of size 25 mm , Nails MS wire 60 mm , Peg hook for hat stand brass Medium weight , Copal varnish in 20 ltr packing , Emery paper No 60 , Emery paper No 80 , Screw wood steel 45 mm , Screw wood steel 40 mm , Pili Mitti , Lal Mitti , Emery paper No 119

Details: Scrap Condemn Ferrous Heavy Mixed Melting Consisting Of Bearing,cover, Locking Plate, Special Rig, Distance Piece Bearing, Middle Wheel Lock Plate, Thrower, Lock Plate, Loose Lip, Racer Distance Piece, Spring Seat Liner,a9, Sa9, C2 Relay Valve, C3w Valve, Air Drayer Valve, Ball Bearing,rollar,secondary Spiring For Wap, Tie Bar Assly C&d No.51, Hexagon Bolt With Hex Sl, Isolating 3 Way Cock, Set Of Key &handal For A, Set Of Machine Items For, Arc-chute Assaly For Em, Flexible Hose, Set Of Spring For Connect, Hex Head Screw M8 X 50mm, Lock Retraction Pin & Cha, Break Shoe Complete Nomin, Set Of Hardware For Prima, 3/4 Duplex Check Valve T, Sander Body Dummy Plug, Set Of Threaded Bolt For, Rotex Magnet Valve Type, Top Opereted Handle For C, 3/4" Check Valve, U Bolt, Screw Driver, Nut Driver, Tubing Cutter, Tap Set, Screw Extracter, Plier, Chisel, Marker Magnetic Stand, File, Taper Drill, Taper Shank Drill, Plane Shank Drill, Center Punch, Measuring Steel Tape, Divider, Set Of Outside And Inside Spring, Crimping Tool, Spanner, Grease Gun, Set Of Square Drive, Weld Deposit Set, Hammer, Crowbar, Torque Wrench, Gear To Half Box, Gas Cutting Blow Ripe, Reamer, Tap Set, Open, Ring, Hand Tap Set, Allen Key, Tubler, Blow Lamp, Pipe Wrench, Safty Helmet, Set Of Jaw, File Set, Micrometer, Sliding Bar, Set Of Plier And Cable Cutter, Token Set, Set Of Electronic Iron, Thickness Gauge, Gas Cylender Key, Steel Blade, Cutogen Nozzle, Drill One Set, Brazing Torch, Ratching, Stripper, Cable Tie Cutting Tool, Regulator, Gauge, Tester, Weighing Machine Parts, Dia Grinder, Drill Machine Parts, Hydrolic Pump, Jack, Tecometer, Elect. Fitting, Spring Seat Assembly, Old Panel Set, Equilizer Beam, Casted Bolster Frame Pieces, Axle Box Housing, Pinion, Portal Cut Lasing, Three Pully, Atd Ball Bearing, St,bt Pipe, Mcc Chanel, Da Box, 9 Ton Adjuster, Angle, Nut, Bolt, Tt Sleeve, Double Strap, Ss Wire Rope, Rt Push Arm, Anchor Fitting, Washer, Gaay Tube Pipe, Super Mast Cross, Feader Attachments, Button Plate, Gaay Rod Double Strap, V Bolt, Cls Panel, Facing Panel Upright, Boom, Strain Clamp, Double Eye Distance Rod, Barbid Wire, Snap Head Pin, Clamp, U Bolt, Balance Bet With Huck And Withot Huck, Turfer, Pull Lift, Chair With Arm, Chair Without Arm, Table, Dropout Fuse, Under Move Fitting, Oprating Handle,outer Rigger, Self Controlled, Hydrolic Pusher & Puller, Socket Set, Drawer Work Bench, Pentopen Strip, Main Spring, Tube, Upper Articulation Assly. Study Link, Pento Base Frame, Servo Motor, Hardware And Compresser Crankshaft, Head, Coupling, Disk Valve, Crossarm Channel, Brackets, Clamp, And Gi Wire, Lfd Frame Cover, Lfd Display Frame, Coach Guidance Shed, Battery Frame, Column Speaker, Single Line Display Board, Horn Speaker, Set Of Lybringth, End Frame, Holder Plate, Bello Plate, Speed Probe Housing Cover, Gear, Cut Piece Of Stator Frame Set Of Hardware, Wag-5 Loco Model Parts, Traction Motor Parts, Ball Bearing, Tm Stator Frame, 12 Hole Adjuster, Anticrip Wire, Clavis Snap Head Pin, Eot Crane, Hog Coupler Heater, Table, Propeller Shaft,board,ferrous Boxes, Almirah, Lockers, And Mics Item. Clamping Plate, Drivers Vaccum, Shaft Assly. Blade, End Shield, Horn Guide, Bolt M 48 Etc. Qty.- 135.565 Mts Approx. Sse Lot No. Et/trs/cs/scrap/condemn/ferrous/heavy Mixed Melt/06/13 Dt. 18/12/2024 Note: 1.lot Should Be Sold On As Is Where Is Basis. 2.qty Of Lot Has Been Assessed On Approximate Basis Subject To Any +/- 10% Variation During Delivery By Actual Weighment If Any. 3.if Any Other Material Except Description Is Found While Delivery, Which Is Strictly Restricted & It Can Not Be Delivered. 4.delivery Of Lot By Actual Weighment. 5.it Is Strictly Advised To The Bidder To See The Lot And Loading Point Personally Before Bidding The Lot In E-auction, No Claim Will Be Entertained After Sale Of The Lot.

Details: Description:- Conducting Final Location Survey (fls) For Broad Gauge Railway Line Along The Existing line With Consultant's Own Labour, Tools, Plants & Equipment, Materials, Transportation With All Lead and Lifts, Duly Taking All Safety Precautions To Ensure Safety, Using Survey Instruments Like Total stations, Dgps, Auto Levels Etc And Using Mx Rail Software As Per The Scope, Terms Of Reference, relevant Provisions Of Indian Railways Code For Engineering Department (1999, Third Reprint) With Up to Date Correction Slips, Special Conditions Of Tender And As Directed By The Engineer-in-charge, including Topographical Survey For 25metre Corridor On Proposed Alignment Side Of Center Line Of existing Track Or On Both Sides Of Proposed Alignment At Diverted Alignment Or Adequate Width In station Yards As The Case May Be, Taking The Longitudinal Levels At Intervals Of 20 M. & At Obligatory points And Cross Sectional Levels At An Interval Of 5m ( Or Less As Decided By Engineer In Charge As per The Terrain) ( Extra Width To Be Covered At Some Locations As Directed By Engineer -in- Charge), including Staking Of Approved Alignment With Cc Pillars (150x150x900mm Size With 300mm Projected above Ground Level) At An Interval Of 100m And With Wooden Pags ( 50x50x450mrn Size) At Every 20m Where Track Is Not Parallel Or Is Away From The Existing Track By More Than 15 M (cost Of Wooden pags In Inclusive).the Rcc Pillars Shall Also Be Fixed On Curves Indicating Transition Portion, Apex point, Crown Of Curve, Beginning And End Point Of Circular Curves, (5 Locations For Each Curve), At major Bridges Two Posts One On Either Side (payment For Cc Pillars Will Be Made Separately As Per item 2 Of Schedule), Including Submitting List Of Distance And Coordinates Of Centre Line Of Proposed bg Line From Centre Line Of Existing Bg Line At Every 20m Interval. The Rate Also Includes Preparation and Submission Of Report Of Final Location Survey (fls) Printed & Duly Bound (2 Sets) And With Two soft Copy In Cd. Note : Detailed Project Report (dpr) Should Be Prepared As Per Railway Board Letter no. 2022/w-1/gen/dpr Proforma (e-off : 3404238) Dt. 13.12.2023

Details: Auction Sale Of Movable Property - Cpu, (231 Pcs.) - (reserve Price: ₹11,550/-) Monitor (187 Pcs.) - (reserve Price: ₹18,700/-) Almira (45 Pcs.) - (reserve Price: ₹4,500/-) Plastic Chair (592 Pcs.) - (reserve Price: ₹2,960/-) Pcs (2 Pcs.) - Reserve Price: ₹29,600/- stabilizer (2 Pcs.) - Reserve Price: ₹2,000/- plywood (7 Pcs.) - Reserve Price: ₹350/- dth Antenna (2 Pcs.) - Reserve Price: ₹1,000/- tv Old Model Lg 3. Make (1 Pc.) - Reserve Price: ₹100/- speaker (2 Pcs.) - Reserve Price: ₹100/- ac Complete - Out Door Indoor Unit (5 Pcs.) - Reserve Price: ₹50,000/- table - Still Frame & Plywood Top (76 Pcs.) - Reserve Price: ₹7,600/- office Chair (20 Pcs.) - Reserve Price: ₹8,000/- cc Tv Dvr (2 Pcs.) - Reserve Price: ₹1,000/- inverter With Battery - Luminous Make (2 Pcs.) - Reserve Price: ₹10,000/- led Tv Lg (2 Pcs.) - Reserve Price: ₹1,000/- photo Copy Machine (2 Pcs.) - Reserve Price: ₹4,000/- sofa Set - 2 Nos, With 19 & 20 (2 Pcs.) - Reserve Price: ₹8,000/- freeze (1 Pc.) - Reserve Price: ₹3,000/- center Table (1 Pc.) - Reserve Price: ₹500/- tea Pay Glass Top (1 Pc.) - Reserve Price: ₹600/- stand Fan (1 Pc.) - Reserve Price: ₹500/- lawn Mower (1 Pc.) - Reserve Price: ₹1,000/- ro Water Filter (3 Pcs.) - Reserve Price: ₹300/- class Room Modular Chair - With Writing Top (648 Pcs.) - Reserve Price: ₹23,24,000/- bus Tata Make, Model Marcopolo Registration No. Or02bk.779 (1 No.) - Reserve Price: ₹5,00,000/- generator (2 Pcs.) - Reserve Price: ₹1,00,000/- dg Set (1 Pc.) - Reserve Price: ₹18,00,000/- computer Table - Box Type (55 Pcs.) - Reserve Price: ₹27,500/- computer Table - Standard (25 Pcs.) - Reserve Price: ₹5,000/- sewing Machine With Modulated Chair (204 Pcs.) - Reserve Price: ₹2,04,000/- white Writing Board (2 Pcs.) - Reserve Price: ₹200/- bed Steel Square Pipe Frame With Ply Top (292 Pcs.) - Reserve Price: ₹7,58,400/- plastic Dining Table Folded (54 Pcs) - Reserve Price: ₹5,400/- steel Almira With Locker (12 Pcs.) - Reserve Price: ₹1,200/- adjustable Book Rack - Steel Make (2 Pcs.) - Reserve Price: ₹400/- coat Stand Steel Make (1 Pc.) - Reserve Price: ₹100/- table Steel Frame, Ply Top (8 Pcs.) - Reserve Price: ₹800/- ambulance - Maruti Omni Van, Registration No. Od-02-ay-6212 (1 No.) - Reserve Price: ₹1,00,000/- wooden Bed (2 Pcs.) - Reserve Price: ₹100/-

Description: BOQ ITEMS: Earth work in excavation in foundation trenches or drains 1.5 m in width or 10 Sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil . All kinds of soil, Earth work in excavation in foundation trenches or drains 1.5 m in width or 10 Sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil . Ordinary rock., Filling available excavated earth excavated rock in trenches plinth sides of foundations etc. in layers not exceeding 20cm in depth consolidation each deposited layer by ramming and wateringlead up to 50m and lift upto 50m and lift up to 1.5m., Supplying and filling in plinth with sand under flours including watering raining considalation and dressing complete., Providing and laying in position cement concrete of specified grade excluding the cost of contering and shuttering- All work upto plinth level 1 isto 3 isto 6 1 cement 3 fine sand 6 graded stone aggregate 20 min nominal size Cement will be issued free of cost from Turamdih centrak store or Mohuldih departmental store., Reinforced cement concrete work in floor roof slab beam walls any thickness plinth and stiring courses fillets columns pillars piers abutments posts and struts etc and all types of works upto floor five level excluding cost of centering shuttering 1 isto 1.5 isto 3 Cement 1 5 coarse sand 3 graded stone aggregate 20 mm nominal size, Centering shuttering including removal of form work for all tyoes of work for providing and fixing straight shuttering. Foundation foooting bases of columns etc., Centering shuttering including removal of form work for all tyoes of work for providing and fixing straight shuttering. Suspended floorsroofslandingbakaniesshelves etc., Providing hoisting and fixing up to floor five level precast reinforced cement concrete 1 isto 2 isto 4 1 cement 2 coarse sand 4 graded stone aggregate 20mm nominal size, Reinforcement for RCC work including straighting cuttingbending placing in poistion and binding all complete Hot rolled deformed bars or TMT bars., Add or deduct for plaster drip course in plastered surface or moulding to R.C.C projections size 1by2 inch into 1by2 inch., Brick work with F.P.S bricks of class designation 75 in foundation and plinth in cement moral 1 isto 6 1cement 6 corse sand. for all types of works., Brick work with F.P.S bricks of class designation 75 in foundation and plinth in cement moral 1 isto 6 1cement 6 corse sand. Do in superstructure for all tyoes of works., Random rubble with hars stone in foundation and plinth including leveling up with cement concrete 1 isto 6 isto 12 1cement 6 corse sand 12 graded stone aggregate 20mm nominal size at plinth level with cement mortar 1.6 1 cement 6 cparse sand., Providing and fixing ISI marked flush door shutters confirming to IS 2202 PartI decorative type core of black board construction with frame of 1st class hard wood and well matched teak 3 ply vennering with vertical grains or cross bands and face veneers on bioth faces of shutters 35 mm thick., Providing and fixing ISI marked M.S pressed butt hingers bright finished with necessary screws etc complete 125 x 652.12mm, Providing and fixing ISI marked oxidised M.S sliding doors bolts withnuts and screws etc. complete 300 x 16mm, Providing and fixing ISI marked oxidised M.S tower bolt black finish Barrel type with necessary screws etc completed 250x10mm, Providing and fixing ISI marked oxidised M.S handles confirming to IS 4992 with necessary screws etc. completed 125 mm, Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete, Providing and fixing bright finished brass casement stays Straight peg type with nevessary screws etc. completed 300 mm weighing not, Providing and fixing to existing door reinforced plastic FRP panelled door shutter of required and approved brand and manufacutred made with fire retardant grade unsturated polyester resin molded to 3 mm thick FRP laminated for forming holloe rails and styles with wooden frame and suitable blocks of seasoned wood inside at required placed for fixing of fittings cast monolithically with 5mm thick FRP laminate for panels and confirming to IS 14856 2000 including fixing to frames., Structural steel work riveted bolts or welded in built up sections truses and framed including cutting hosting fixing in position steel primer all complete., Providing and fixing 1 mm thick M.S steel cloor with frame of 40 x 40 x 6mm angle iron and 3mm M.S gassed plates at the juctions and corners all necessery fitting complete including applying a priming coat of approved steel primer. Using M.S angles 40x40x6mm for diagonal braces, Providing and fixing factory made ISI marked glazed doors windows and ventilatiors side or top or centre hung with beading and all memebers such as K11 B and K 12 B etc. Completed of standard rolled steel sections joints mitred and flash but welded and sash bars tenoned and riverted with 15 x 3mm lugs10cm long embeded in cement concrete blocks 15x10x10 cm of 1 isto 3 isto 6 1 cement 3 coarse sand 6 graded stone aggregate 20mm nominal size or with wooden plugs and screws or rawl plugs and screws or with fixing crips or with bolts and nuts as required including providing and fixing of hinges pivots floats glass panes with glazing clips and special metal sash putty of aproved make and a priming coat of approved steel primer excluding the cost of metal beading and other fittings except necessary hinges or pivots complete as per approved design and as per the directon of EIC, Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 thickness to be specified by the manufacture of approved make in all clour shades except burgundy bottle green black of any size as approved by Engineer incharge in skirting risers of steps and dados over 12mm thick bed of cement mortar 1isto3 at the rate 3.3 kg per sqm including pointing in white cement mixed with pigment of machine shade complete., Providing and laying vitrified glazed ceramic floor tiles 300x 300 mm or more thickness to be specified by the manufacturer of 1st quality conforming to IS 15622 of approved make in colours white ivory grey fume red brown laid on 20mm thick cementincluding grouting the jpints with white cement and matching pigment etc. complete., Cement plaster skirting Upto 30cm height with cement mortor 1 isto 3 isto 9 cement 3 coarse sand finished with a floating coat of neat cment 3 mm thick., Cement concrete flooring 1isto2isto4 1 cement 2coarse sand 4 graded stone aggregate finished with floating coat of next cement including cement slurry but including the cost of nosing of steps etc. complete.40 mm thick with 20mm nominal size stone aggregate., Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS 13592 Type A including jointing with seal ring conforming to IS 5382 leaving 10mm gap for thermal expansion i single socked pipes 110 mm diameter., Providing 15mm thick cement plaster 1 isto 6 1 cement 6 fine sand., 6mm cement plaser to celling of mix 1 isto 3 1 cement 3 fine sand, Neat cement punning, White washing with line on new work three or more coats to give an even surface., Finishing walls with testured exterior paint make Berger 7 yr) weather coat or required shade. On New work (Two or more coats applied at the rate 3.28 ltr per 10 Sqm over and including base coat of water proofing cement paint applied at the rate 2.20 Kg per 10 Sqm., Painting with 1st quality synthetic enamel paint make Asian or Berger or of approved brand and manufacture of required colour to give and even shade. Two or more coat of suitable shade with ordinary paint of approved brand and manufacture., Making plinth protection 50mm thick of cement concrete 1isto3isto6 1 cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size over 75mm bed by dry brick ballast 40mm nominal size grouted with fine sand including finishing the top smooth., Dry brick pitching hair brick thick in drain including supply of bricks and preparing the surface complete with F.P.S bricks of class desigantion 7.5, Providing and fixing water closet squatting pan Indian type W.C pan with 100mm sand cast iron P or S trap10 litre low level white P.V.C flushing cistern with manually controlled device handle lever conforming to IS 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required white viteous china orissa pattern W.C pan of size 580 x440mm with integral tyoe foot rests., Providing and fixing white vitreous china flat back or wall corner tyoe liped front urinal basin of 430x260x350mm and 340 x410x260mm sizes respectively with automatice flushing cistern with standard flush pipe and C.P brass spreaders with brass unions and G.I clamps complete including painting of fittings and brackets cutting and making good the walls and floors wherever required. One urinal basin with 5 liter white P.VC automatic flushing cistern., Providing and fixing P.V.C low level flushing cistern with manually controlled device handle level conforming to IS 7231 with all fittings and fixtures complete. 10 liter capacity white., Providing and fixing wash basin with C.I brackets 15mm C.P brass pillar taps 32mm CP brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever required. White vitreous china wash basin size 630x450mm with a single 15mm C.P brass pillar tap., Providing and fixing 100mm sand cast iron grating for gully trap., Providing and Fixing rectangular shape 453 x 357 mm mirror of superior glass and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard boarding complete as per the direction of E.I.C, Provifding and fixing PVC Soil pipe 100 mm dia., providing and fixing CP towl rail completed with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved qulaity and colour 450mm long towel rail with total length of 495mm 78mm wide and effective height of 88mm weighing not less than 170gms., Providing and fixing 1by2inch brass ISI marked bib cock & stop cock ISI., providing and fixing GI pipes complete with GI fitting including trenching and refilling etc. 15 mm dia nominal bore., providing and fixing GI pipes complete with GI fitting including trenching and refilling etc. 20mm dia nominal bore., providing and fixing GI pipes complete with GI fitting including trenching and refilling etc. 25mm dia nominal bore., providing and fixing GI pipes complete with GI fitting including trenching and refilling etc. 40mm dia nominal bore., providing and fixing GI pipes complete with GI fitting including trenching and refilling etc. 50mm dia nominal bore., Provind and fixing of super zinc colour coated steelcrafazoial or profile tiles colour coated steel sheet a corrugated sheet upto 60m pitch., Provind and fixing of pre coated galvanised steel sheet roofing accessories 0.50 mm plus or minus 5 percent total coated thickness TCT thick zinc coating 120grams as per IS 277 in 240 mpa steel grade 5to7 microns epoxy primeier on both side of the steel and polister of coat 15to18 microns using self drilling self tapping screws or with polymer coated J or L hooks bolts and nuts and or GI seam bolts and nuts. GI plane and Bitumen washers complete. Rigidis 500to600mm, Provind and fixing C.P brass bib cock of approved quality confirming to IS 8931. 15mm nominal bore., Provind and fixing C.P brass stope cock of standard design and of approved confirming to IS 8931 15 mm nominal bore, Provind and fixing gate valve GM 25 mm., Provind and fixing gate valve GM 50 mm., Provind and fixing brass stope cock of approved quality 25 mm nominal bore., Provind and fixing hydraulic door closer, Provind and fixing 15mm dia PVC connector, Providing and fixing glazed stone ware pipe or fume pipe 150 dia, PCC 1 isto 5 isto 10 for stone wire pipes 150 mm dia., Making soak pit 2.5m diameter 3.00meter deep with 45x45 cm dry bricks honey comb shaft with bricks of clas designation 75 and S.W drain pipe 100mm dia meter 1.8 meter long complete as per standard design with F.P.S bricks, Renewal old glass puttyof galss paines Length and painting the same, Renewwing glass panes 4 mm thick with putty and nails

Details: 1)Eos to 3no street ligh to St.Lt.PAL SC No.195-009-118 The Executive officer Town Panchayat, Valvachagostam under Eraviputhoorkadai Section. 2)Eos to 2no street ligh to St.Lt.PAL SC No.195-009-472 The Executive officer Town Panchayat, Valvachagostam under Eraviputhoorkadai Section. 3)Eos to 2no street ligh to St.Lt.PAL SC No.195-009-1261 The Executive officer Town Panchayat, Valvachagostam under Eraviputhoorkadai Section. 4)NDSC Extn to D.Justin Nayagam under Eraviputhoorkadai Section. 5)Eos to TY.SY Extn P.Ravikumar under Eraviputhoorkadai Section. 6)Eos to HSC Extn.Sree Latha Beaula Bai under Eraviputhoorkadai Section. 7)DCW estimate for PSC pole 8 mtr shifting as per request of the Executive Officer Town Panchayat Valvachagostam under Eraviputhoorkadai Section. 8)DCW estimate for 1no PSC pole 8mtr dashing of vehicle no TN 72AB9096 by Thiru.M.Mahendiran at Santhinager under Eraviputhoorkadai Section. 9)DCW estimate for 1no PSC pole 8mtr dashing of vehicle no TN 74V7979 by Thiru.S.Santhosh at Cherkole under Eraviputhoorkadai Section. 10)DCW estimate for 1no PSC pole 8mtr dashing of vehicle no TN 75E0339 by Thiru.T.saravanan at Thiruchancode under Eraviputhoorkadai Section. 11)DCW estimate for 1no PSC pole 8mtr dashing of vehicle no TN 74B0360 by Thiru.S.Jayakumar at Pallivilai under Eraviputhoorkadai Section. 12)DCW estimate for 1no PSC pole 8mtr dashing of vehicle no TN 74O0040 by Thiru.Sujin at Mulamkootuvilai under Eraviputhoorkadai Section. 13)DCW estimate for PSC pole shifting as per request of Thiru.Ashik Ahamed, Assistant Engineer, TWAD Board Project Division-II Nagercoil under Eraviputhoorkadai Section. 14)DCW estimate for replacement of 1no 8mtr PSC damaged pole while cutting coconut tree as per request of Thiru.Padmakumar at poolanthottam under Eraviputhoorkadai Section. 15)DCW estimate for 1no 9mtr PSC pole shifting as per the request of The Executive officer Town Panchayat valvachagostam under Eraviputhoorkadai Section. 16)DCW estimate for 1no 8mtr PSC pole shifting as per the request of The Executive officer Town Panchayat Mulagumoodu under Eraviputhoorkadai Section. 17)DCW estimate for 8mtr PSC pole shifting as per the request of The President Village Panchayat, Kannanoor under Eraviputhoorkadai Section. 18)DCW estimate for 8mtr PSC pole shifting as per the request of The President Village Panchayat, Kannanoor under Eraviputhoorkadai Section. 19)DCW estimate for 8mtr PSC pole shifting as per the request of The President Village Panchayat, Kannanoor under Eraviputhoorkadai Section. 20)DCW estimate for 8mtr PSC pole shifting as per the request of The President Village Panchayat, Kannanoor under Eraviputhoorkadai Section. 21)DCW estimate for 8mtr PSC pole shifting as per the request of The President Village Panchayat, Kannanoor under Eraviputhoorkadai Section. 22)DCW estimate for 8mtr PSC pole shifting as per the request of Thiru.G.Sasichandira Jones at Andruttivilai under Eraviputhoorkadai Section. 23)DCW estimate for 8mtr PSC pole shifting as per the request of Thiru.D.Gana Dhas at Maruthoorkurichy under Eraviputhoorkadai Section. 24)DCW estimate for 8mtr PSC pole shifting as per the request of Thiru.A.Jini at Varukkavilai under Eraviputhoorkadai Section. .25)DCW estimate for 1no 8mtr PSC pole shifting as per the request of Thiru.K.Robinson at Paruthivilai under Eraviputhoorkadai Section. 26)DCW estimate for 1no servicewire shifting as per request of Thiru.M.George Silvans at Vellicode under Eraviputhoorkadai Section.27)DCW estimate for 1no 8mtr PSC pole shifting as per the request of The Assistant Engineer, National Highway, Thuckalay under Eraviputhoorkadai Section. 28)DCW estimate for 2nos 8mtr pole insertion as per the request of Thitu.M.Selvan at Pilankalai under Eraviputhoorkadai Section. 29)DCW estimate for 1no 8mtr &1no 9mtr PSC pole shifting as per the request of Thiru.T.Vineesh at Kovilvilai under Eraviputhoorkadai Section. 30)DCW estimate for 1no 8mtr &1no 9mtr PSC pole shifting as per the request of Parish Priest at Lady of Sorrow Church, Vellicodeunder Eraviputhoorkadai Section. 31)Eos to 1 no HSC extn to Thiru.M.Joel at Punnaicadu under Eraviputhoorkadai Section