Indian Oil Corporation Limited Tender
... More
The IOCL has issued a formal invitation for competitive bids for the Indian Oil Corporation Limited project, for Construction Of Cgs (city Gate Station) At Bokaro, Sasaram, Aurangabad, Ramgarh, Morena in Rohtas, Bihar, with an estimated contract value of Rs. 3,48,95,659. The bid opening date for this tender is 07-10-2019 and the last date for bid submission is 22-10-2019. Interested bidders for Indian Oil Corporation Limited tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Indian Oil Corporation Limited - IOCL Tender
Opening Date7 Oct 2019
Closing Date22 Oct 2019
Tender Amount₹ 3,48,95,659
Costs
EMD
₹ 3,49,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Construction Of Cgs (city Gate Station) At Bokaro, Sasaram, Aurangabad, Ramgarh, Morena
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_PLHO_105800_2Bid Award Id
ViewTender No
PLCGD/WORKS/19/10Tender Authority
Indian Oil Corporation Limited ViewPurchaser Address
-Website
http://https://www.iocl.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Special_Instructions_to_the_Bidders_20190325
BOQ Items
... More
Supplying and filling selected earth/ moorum (excluding black cotton soil) from Contractor's own borrow areas including royalty, with all leads and lifts in low laying areas and filling to required grade and level including watering, compacting at optimum moisture content to 90% of Proctor's density, consolidation and rolling with 8 to 10 tonne power roller in layers not exceeding 20 cm thickness, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer.
3000
-
-
... More
Supply, Installation, testing & commissioning of lightning conductor finial made of 25 mm dia 300 mm long GI tube having single prong at top with 85 mm dia 3 mm thick GI base plate including holes etc. complete as required.
13
-
-
... More
Installation of above ground Carbon Steel Process Piping as per details given below:
-
-
-
... More
Size - 4.0 Inch, Thk/Sch - XS, Material - ASTM A 333 GR.6,BE SEAMLESS
24
-
-
... More
Supply of BW Un-equal Tee as per details given below:
-
-
-
... More
Providing and laying cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 10 mm down size) mixed with approved brand of water proofing compound @ 1Kg/50 Kg bag of cement, in roof grading, coping, in bed concrete etc. at all heights & depths, including providing centering and shuttering, scaffolding, watering, curing, vibrating, etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of the Site Engineer.
11
-
-
... More
Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/ vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening/ binding material to fill up interstices of coarse aggregate, watering and compacting to the required density.
88
-
-
... More
Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of the Engineer-in-Charge.
75
-
-
... More
Supply, Installation & Laying, testing & commissioning of GI wire / rope 35 sq. mm
50
-
-
... More
For 10 Users
2
-
-
... More
Supply, Installation, testing & commissioning of Battery Charger 415V, 50 HZ, 10KW appx .have 1 X 100 % (Optional Item)
1
-
-
... More
Initial Test (Test Load 2.5 times the Safe Capacity)
1
-
-
... More
LT DG set with PLC based AMF panel etc
1
-
-
... More
Size -4.0 Inch,300#, Material- Bolt: ASTM A193 GR.B7 Nut: ASTM A194 GR.2H, Dimn. Std. - ASME B 16.9
100
-
-
... More
15 mm nominal outer dia pipes
30
-
-
... More
SIZE: 8T X1.5 SQMM
100
-
-
... More
Powder coated (Minimum thickness 50 micron) Aluminium
11
-
-
... More
Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
60
-
-
... More
Size - 12.0 Inch, Rating - 300#
1
-
-
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
17
-
-
... More
5 KVA in (1+1) parallel redundant equal load sharing configuration excluding battery as per the tender specifications
1
-
-
... More
Cables having outer diameter upto 20mm
260
-
-
... More
150 mm nominal size diameter
100
-
-
... More
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
45
-
-
... More
Supplying and filling good earth for lawns & in plantation area, in layers not exceeding 20 cm depth in one operation including removal of debris/ un-wanted material, consolidation, dressing, levelling and watering etc. complete as per direction of the Site Engineer/ Engineer-in-Charge. (Note : Volume of earth to be calculated for the payment shall be the volume of stacked earth after reduction by 20%).
60
-
-
... More
Power cables LT : OD above 20 mm and upto 40 mm
375
-
-
... More
Powder coated (Minimum thickness 50 micron) Aluminium
15
-
-
... More
15 mm nominal outer dia pipes
10
-
-
... More
All works upto plinth level
350
-
-
... More
300 mm diameter
10
-
-
... More
Size of Tile 600x600 mm
8
-
-
... More
53 mm to 22.4 mm size stone aggregate
38
-
-
... More
Supply, Installation & Laying, testing & commissioning with including cable glands, lugs and termination for aluminium conductor XLPE insulated armoured served sheated FRLS cables 1100 V grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S clamp etc. of suitable size or as directed by engineer incharge, complete in all respect, the armouring with fire retararted cable shall be properly connected with the earth conductor by clamps etc.
-
-
-
... More
Size -12.0 Inch x 4.0 Inch,300#, Thk/Sch - 6.4 mm x 6.4 mm , Material - ASTM A234 GR.WPB, Dimn. Std. - ASME B 16.9
5
-
-
... More
Suspended floors, roofs, landings, balconies and access platform
240
-
-
... More
200 mm diameter
15
-
-
... More
150 mm clamp
1
-
-
... More
Supply of Pairs of Rubber hand gloves IS Mark
2
-
-
... More
Supply, installation & fixing of prefabricated perforated GI cable trays of width 150 mm, 300 mm, 450 mm & 600 mm as per site requirement for laying of cables with standard rung spacings. Load for support span of 2.5 meter as 30, 60, 75 & 90 (in Kg/Mtr) respectively with concentric static load as 70 Kg at the centre, with materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge
300
-
-
... More
Providing and fixing LUXALON 75C & 225C un-perforated Aluminium panel coloured ceiling manufactured by M/s. HUNTER DOUGLAS INDIA or any other approved equivalent brand, each panel consisting of 75/225 mm wide x 15.5 mm deep and 0.5 mm thick with bevel edged panel made from enamelled corrosion resistance aluminium alloy AA-5050 (Al.Mg), each panel to abut each other with a narrow 'V' groove, clipping with a baked enamelled aluminium panel carrier of 32 mm wide x 39 mm deep x 0.95 mm thick in standard length of 5 metres made of double baked enamelled aluminium alloy AA-5050 (Al.Mg) black with cutouts to hold the panels in a module of 75 mm closed at a distance of 1.25 metre, each panel carrier suspended by means of G.I. suspension rod 4 mm diameter and a galvanised supsension spring clip at a distance of 1.7 metre centre to centre, making openings for light fittings etc. with suitable peimeter framing all complete as per manufacturer's recommendation and directions of the Engineer-in-Charge. (Note: Measurement shall be made wall to wall without any deduction for openings, for payment purpose).
35
-
-
... More
W.C. pan with ISI marked white solid plastic seat and lid.
2
-
-
... More
Supply, installation & fixing of perforated GI trays of width 100 mm as per site requirement for laying of cables with standard rung spacings. Load for support span of 2.5 meter as 30, 60, 75 & 90 (in Kg/Mtr) respectively with concentricstatic load as 70 Kg at the centre, with materials, labour, tools andtackles, consumables etc , as per drawings, specification anddirections of Site Engineer / Engineer-in-Charge.
270
-
-
... More
Size - 4.0 Inch, 300#, Material - ASTM A105 (Charpy), Face/Finish - RF/125AARH , Dimn. Std. - ASME B16.48
3
-
-
... More
Providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of the Engineer-in-Charge and accordance with applicable specifications.
2
-
-
... More
Providing and fixing 12 mm thick Elevational Brick Tiles for facia, vertical face of walls, etc. at all levels and locations laid over and including a backing coat of 15 mm thick cement mortar (1 cement : 3 sand) and joints filled with coloured cement of same colour as tiles complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per specification and directions of the Engineer-in-Charge.
29
-
-
... More
Constructing percolation pit of size 3.0m diameter and 2.0m deep, filled with 40 mm size brick ballast including providing suitable pre-cast RCC covers with lifting lugs, laying of 150mm diameter x 5.0m long U.P.V.C. pipe embedded in pit/ outlet pipe all complete as per specification and directions of the Engineer-in-Charge.
2
-
-
... More
Supply, Installation of Fiirst aid box with Snake serum
2
-
-
... More
Size - 8.0 Inch, Thk/Sch - 6.4 mm , Material - API 5L Gr. X-52 PSL 2, (CHARPY), BE, ERW/Seamless
12
-
-
... More
110 mm
16
-
-
... More
CIVIL
-
-
-
... More
C.P. Brass (Ref. Make: JAQUAR, Model: Cat. No.-1151 or approved equivalent).
2
-
-
... More
Circular Tank
1000
-
-
... More
110 mm diameter
107
-
-
... More
2532 (32 mm OD) pipe
10
-
-
... More
Preparation and consolidation of sub-grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead up to 50 metres.
250
-
-
... More
Size - 12.0 Inch, 300# , Thk/Sch - 6.4 mm, Material - ASTM A105 (Charpy), Face/Finish - RF/125AARH , Dimn. Std. - ASME B16.5
8
-
-
... More
Cables having outer diameter between 20 to 30 mm
100
-
-
... More
600mm x 600mm x depth up to 750mm inner dimensions
1
-
-
... More
Routine Test (Test Load 1.5 times the Safe Capacity)
1
-
-
... More
Supply, installation, testing and commissioning of swan neck lighting pole of 100mm nominal Diameter B class MS pipe (Height of bottom of light fitting shall be 7 meters from FGL), having base Plate 200mmx200mmx5mm along with Flameproof and Weatherproof 2x26W CFL well glass light fitting complete with lamp and builtin control gear and choke of approved make(Cat.No.WG/A/1234 of Sudhir Switchgears or equivalent approved make), including supply and installation of earthing conductor of 8 SWG GI wire, nuts, bolts, Neck portion of lighting pole shall made up be of 50mm diameter GI pipe(radius of neck shall be 250mm). The pole shall be painted with 01 coat of primer and 02 coats of aluminium paint. The job shall also include supply and installation of 4 way Flameproof/weather proof junction box(with 4 cable entries) having 8 Nos., 6A, 440V shrouded terminal, with double compression FLP glands/lugs with looping arrangement and supply and termination of 3C X 2.5 sq. mm. armoured copper PVC/XLPE insulated cable from JB to light fitting The job complete in all respects as per specifications, drawings and instructions of EIC / Site engineer.
6
-
-
... More
Size -4.0 Inch x 2.0 Inch,150#, Thk/Sch -STD x XS , Material - ASTM A350 GR.LF2, Dimn. Std. - ASME B 16.9
3
-
-
... More
25 mm nominal bore
4
-
-
... More
CAT 6 cable and cabling from field cameras to CCTV control system.
250
-
-
... More
4" Rain Cap for Vent.
1
-
-
... More
Two coats
10
-
-
... More
Supply, Installation of Shock treatment chart
2
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete
415
-
-
... More
Acid and alkali resistant tile
19
-
-
... More
Area of slab up to 0.50 sqm
4
-
-
... More
Providing grooves of uniform size 12x12 mm and up to 15x15 mm in plaster as per approved pattern using wooden battens, nail to the under layer including removal of wooden battens repair to the edges of panels and finishing the groove complete as per directions of the Engineer-in-Charge.
218
-
-
... More
Receiving and taking over of all Owner supplied materials from Owner's designated place(s) of issue, transportation including loading, unloading, handling from Owner's designated place(s) of issue to Contractor's own stock yard(s) / work site(s) / work shop(s) including arranging all necessary intermediate storage area(s) thereof, as required; supply of all materials (except those specified subsequently in SOR), equipment, consumables as defined in Contractor's scope of supply and their transportation to the work site(s); performing all above ground piping fabrication works including cutting, edge preparation (inclusive of grinding the edges of pipes, fittings, flanges etc. to match with the matching edges of uneven / different thickness wherever required), fit up, bending, pre-heating wherever required, welding, threading etc.; erection of pipes of all types and thickness over sleepers, overhead on racks and at all elevations; hook-up with equipment nozzles; all types of inline and online instruments such as pressure / thermal safety valves (other than those covered separately), fittings of all sizes i.e. elbows, reducers, tees, 'o' lets, flanges, blind flanges, spectacle blinds, tapping's for pressure gauges, thermowells, hoses and hose couplings of all sizes, if applicable, vents and drains required for process and hydrotesting purposes etc. including fixing of all types of gaskets (including gaskets for RTJ flanges), bolts, studs and nuts of all sizes; carrying out non-destructive testing (excluding radiography covered subsequently in SOR) such as magnetic particle/ liquid penetration etc. as required; hook-up with existing piping / pipeline installed by others as per drawings wherever required; cleaning and flushing by water / compressed air, carrying out hydrostatic test, pneumatic test, valve functional test and any other type of testing as specified, de-pressurising, dewatering, drying by compressed air if applicable; cutting / rebeveling (as required), pre-commissioning and providing commissioning assistance to Commissioning Contractor / Agency for process piping and commissioning of non-process piping if applicable; clean-up and restoration of site, preparation of as built drawings, documents and project records; transportation of surplus free issue materials to Owner's designated place(s); completing all works in all respects as per the AFC drawings, specifications, standards and other provisions of Contract and instruction of Engineer-in-Charge.
Note :-
a) Removal of 3LPE coating by cold methods & surface finishing as per Sa 2 1/2 shall be considered under this item. Bidder to quote accordingly.
b) All butt welded fittings end shall generally match with connecting pipe wall thickness. However, in case of misalignment, contractor shall have to do end preparation accordingly without any extra cost.
c) All couplings, nipples, plugs for nipple etc. as required shall be supplied by contractor without any extra cost.
d) Supply and Installation of Pipes, Valves, fittings & flanges of size 2" & below is covered under this item.
e) Any branch connection taken from mainline shall be considered under this SOR item only.
f) Painting of pipe flange, fittings, valves, for all auxilary items suitable for normal corrosive as per specification is considered under this item. Bidder to quote accordingly No extra cost shall be paid for the above items.
-
-
-
... More
2 loop, Addressable, Intelligent Fire Detection and Alarm Panel for automatic fire detection & annunciation of alarms for various types of detectors installed like multi sensor, heat detectors, response indicators, loop isolators, manual call points, hooters etc installed in plant area and various buildings as per tender specifications
1
-
-
... More
150 mm diameter
1
-
-
... More
Portable Gas Detector with controller, audio-visual alarm and suitable (intrisically safe) for hazardous area classified as classification Class I, Div. I Group C&D as per API-RP-500 as per tender specification
1
-
-
... More
Size - 4.0 inch, 300#
20
-
-
... More
Supply of MEDB as mentioned above & SLD
1
-
-
... More
Size - 8.0 inch, 300#
2
-
-
... More
Supply including procurement, testing and transportation to worksite(s)/workshop(s) including loading, unloading and handling for the following materials to be supplied by Contractor as per the requirement of PMS, specifications, data-sheets, standards, instructions of Owner/ Engineer- in-Charge and other provisions of Contract.
-
-
-
... More
Size -8.0 Inch x 4.0 Inch,300#, Thk/Sch - 6.4 mm x 6.4 mm , Material - ASTM A234 GR.WPB, Dimn. Std. - ASME B 16.9
1
-
-
... More
Supply and planting sapling (not less than 45 cm in height and 60 cm centre to centre) of Casurina, Labrum, Gulmohar, Ashokas, Bottle Palm, Bougenvilla, Hibiscus, Roses or other approved type of variety of plants, watering & maintenance for 30 days minimum complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and direction of the Site Engineer.
100
-
-
... More
1:1.5:3 (1 cement : 1.5 coarse sand (Zone-III): 3 graded stone aggregate 20 mm nominal size)
40
-
-
... More
New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
2877
-
-
... More
SIZE: 1T X1.5 SQMM
140
-
-
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 Degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone-III) : 3 graded stone aggregate 20 mm nominal size)
20
-
-
... More
Size - 4 Inch, 300#, Material - ASTM A350 GR.LF2, Face/Finish - RF/125AARH , Dimn. Std. - ASME B16.48
2
-
-
... More
110 mm Shoe
16
-
-
... More
Holes 0.6 metre deep and 0.6 metre diameter.
300
-
-
... More
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth up to 50m lead and lift up to 1.5 m, as directed by the Engineer-in-Charge :
-
-
-
... More
250 mm diameter
15
-
-
... More
With common burnt clay F.P.S. (Non-modular) bricks of class designation 7.5
1
-
-
... More
PIPING LEAKS / BURSTS (ATTRIBUTABLE TO OWNER)
-
-
-
... More
Providing and fixing ball bearing for rolling shutters.
1
-
-
... More
Construction of second class brick masonary open surface drain (Size: 200mm wide & 200mm average depth) in cement mortar 1:4 laid over a bed of 150mm thick cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including making haunches and providing 15mm thick cement plaster in CM 1:4 (1 cement : 4 coarse sand) with a floating coat of neat cement inside and its top and exposed surfaces, including excavatioin, disposal of the surplus earth up to any lead and lift as per standard design and drawing, complete in all respects inclusive of cost of all labour, materials, carriages, excavation and refilling, curing etc., as per specifications of the Engineer-in-Charge.
90
-
-
... More
Supply, erection, installation and testing of 20M high mast shaft in three sections suitable for wind speed as Per IS-875, with raising lowering system comprising, head frame, luminaries carriage suitable to install 24 nos luminaries of BENP-20FL 240 W LED of Bajaj/Philips/surya in symmetrical arrangement, double drum winch, 6mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, lightening finial, including 1 set foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates. This includes Supply and installation of 24 nos. Integral LED Flood Light Luminaire with the following components: 02 nos Aluminum Cast luminary body, 02 nos Electronic Circuit & LED drivers, 02 nos Weather proof Transparent Cover, 02 nos Luminary Mounting Clamps, 02 nos LED Assembly. 240 Watts and 1 set Within Luminary Interconnection. Supply and installation of 2 nos. LED type single dome aviation obstruction light is also required with one high mast. This also includes Supply and installation of 1 no. outdoor stand mounted feeder pillar with 63A, 4-pole MCCB incomer, single dial time switch, 45A TP contactor for the automatic switching of luminaries, power tool control with 2 no 9A contactors and raise lower push button, Incoming 35 sq. mm and outgoing 16 & 2.5 sq. mm terminals. The Control Panel shall be of flame proof type suitable for gas group IIA/IIB.Construction of shallow foundation with M25 grade concrete for the highmast considering the safe soil bearing capacity at site as 10 T/sqmtr at 2 metre depth with all materials and labour. Lightning Finial shall be insulated from body and head frame of High Mast and a separate down conductor (1Rx1Cx35 sq mm Aluminium Flexible Cable) shall run from the lightning finial to an earthing bolt independent of the high Mast structure. Electrical accessories like plug & socket, power tool motor etc at the bottom of high mast shall be flame proof type suitable for gas group IIA/IIB. Electrical Accessories like plug & Socket, Power Tool etc at the bottom of high mast shall be of flame proof Type Suitable for Gas Group-IIA/IIB. Ref. WO No. 24111367 dtd 26.3.2014
1
-
-
... More
75 kg capacity DCP type (trolley mounted)
2
-
-
... More
Stone screening 13.2 mm nominal size (Type A)
7
-
-
... More
Providing and laying 40 mm thick CC 1:2:4 Damp Proof Course with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone chips 6 mm down size) laid to proper level & line including providing shuttering, applying two coats of bitumen applied @ 1.50 Kg/sqm and spreading an even layer of coarse sand over hot bitumen, etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of the Site Engineer.
162
-
-
... More
Supplying & fixing in position pre-cast cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate) kerb stone of size 450 mm high, 150 mm average thick & 600 mm long, each stone joined with 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) over a base of cement mortar, including excavation, bed concrete 300 wide & 100 thick in cement concrete 1:3:6 concrete, painting of exposd surfaces etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and direction of Site Engineer.
100
-
-
... More
LEL Controller (16 Channel & SIL-2 Certifed) as per tender specifications
1
-
-
... More
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete.
13
-
-
... More
CGS CONSTRUCTION
-
-
-
... More
Supply of Fig 8 (Spectacle Blind) as per details given below:
-
-
-
... More
C.P. brass double coat hook (Ref. Make: JAQUAR, Model: Cat. No. 1161 or approved equivalent).
6
-
-
... More
1:2:4 (1 cement : 2 coarse sand (Zone-III) : 4 graded stone aggregate 20 mm nominal size)
4
-
-
... More
Size - 4.0 Inch
75
-
-
... More
90 mm to 45 mm size stone aggregate
50
-
-
... More
Wiring with PVC insulated 2.5 sqmm copper conductor wire for fan points (1 fan point controlled by 1 modular switch) including providing space for electronic regulator in switch box , providing and fixing fan hook in the ceiling as per specifications and drawings.
6
-
-
... More
1:3 (1 cement : 3 fine sand)
1005
-
-
... More
80 x 1.25 mm M.S. laths with 1.25 mm thick top cover
5
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
595
-
-
... More
Fire Alarm Control Panel (FACP) - Control Building
Design, detailed engineering, supply, configuration, testing, installation, erection and commissioning of FACP.
FACP shall be installed in suitable cabinet inside control building.
Supply, Laying of cable inside building between detectors, MCP, hooter and FAC including glanding, termination, ferruling, dressing etc. at both ends. Supply & installation of cable trays (if necessary), supply of erection materials, cable ferrules, cable lugs, cable tie etc. for successful commissioning of FACP. Following items are included in the Fire Alarm Control Panel (FACP):-
-
-
-
... More
Supply of Weldolet conforming to MSS-SP-97, Material - ASTM A105 (CHARPY) and as per details given below:
-
-
-
... More
DISTRIBUTION PANELS, DISTRIBUTION BOARD & APFC Panel with Capacitor banks
-
-
-
... More
Supplying and fixing, shop fabricated M.S. steel Electroforged Welded Gratings (Hot dip galvanised as per IS:2629 and tested as per IS:2633 and IS:6745) of approved make with quantity of zinc coating shall not be less than 9.0 N/sqm of surface area (0.12 mm uniform thickness) over drains, stair treads etc., wherever required with maximum size of void/ mesh in the grating limited to 33 mm x 50 mm including welding/ fixing/ clamping to base frame, etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.
1
-
-
... More
Cement mortar 1:4 (1 cement :4 coarse sand)
25
-
-
... More
Size - 12.0 Inch, Rating - 300#
4
-
-
... More
32 mm
50
-
-
... More
Manual Call Point (Explosion Proof & Weather Proof) for hazardous area along with all mounting & other accessories as per tender specifications.
1
-
-
... More
150 mm diameter
1
-
-
... More
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
5
-
-
... More
100 mm
20
-
-
... More
110 mm Bend
16
-
-
... More
VALVES
-
-
-
... More
SIZE: 2P X1.5 SQMM
140
-
-
... More
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia. M.S. bar bent to shape as per standard drawing.
3
-
-
... More
2025 (25 mm OD) pipe
10
-
-
... More
Size -12.0 Inch,300#, Material- Bolt: ASTM A193 GR.B7 Nut: ASTM A194 GR.2H, Dimn. Std. - ASME B 16.9
196
-
-
... More
Supplying and providing non-shrinkable cement grout (SHRINKKOMP 20 or any other equivalent approved brand) for grouting holding down bolts in pocket holes for equipment foundation, including necessary surface preparation mixing of grout, curing as per manufacturer's recommendation/ specification and direction of the Site Engineer. (Note: This item shall be operated under specific instruction of the Engineer-in-Charge.)
423
-
-
... More
DG Set in acoustic enclosure mounted on a common base frame, complete with PLC based AMF panel, 1 number fuel tank of 990 Ltrs along with piping interconnecting fuel tank & engine with isolation valves, batteries, battery charger & leads, AVM Pads, Residential Silencer, Motor driven separate lube oil priming pump, First fill of lube oil, Acoustic enclosure, complete for exhaust system including cladding & support structure, as per the specification, spares (2 years maintenance spares as mentioned in annexure-II and any other spares not covered in annexure-II but required as per the manufacturer recommendations) as per the specifications, all interconnecting power & controls cable along with the termination material (lugs & glands) etc., complete in all respect as per the specification.
-
-
-
... More
60mm thick Cement Concrete paver block of M-35 grade with approved colour, design & pattern.
30
-
-
... More
All kinds of soil
3400
-
-
... More
In 75x75 mm deep chase
54
-
-
... More
INSTRUMENTATION
-
-
-
... More
Addressable Manual Call Point (for Safe area) along with all mounting & other accessories as per the tender specifications.
4
-
-
... More
Providing and fixing, on fixed glazing/ doors/ window panes, sun control film "HP NATURAL 35 SAFETY COMBINATION FILM-4Mil" of M/s. GARWARE or approved equivalent make and shade, all complete as per manufacturer's specification and as per instructions of the Engineer-in-Charge.
50
-
-
... More
Supply of Blind Flanges as per details below:
-
-
-
... More
All kinds of soil
12
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500D or more
39000
-
-
... More
Supplying and laying flat brick soling in foundation trench, in floors, garages, sumps, etc., with bricks of class designation 50 laid to proper slope, level and grade etc. filling of the joints with sand etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of the Site Engineer.
197
-
-
... More
FABRICATION, ERECTION, INSTALLATION AND TESTING OF PIPING
-
-
-
... More
Supply of Cables
-
-
-
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of the Engineer-In-Charge.
4
-
-
... More
SUPPLY, INSTALLATION, TESTING & COMMISSIONING
-
-
-
... More
Pressure indicators of range 0 to 100 kg/cm2 as per the technical specifications attached in tender
1
-
-
... More
Filling the excavated earth to required grade, level & profile in low lying areas including watering, ramming, compacting at optimum moisture content to 90% of Proctor's density consolidation by rolling with 8 to 10 tonne power roller in layers not exceeding 20 cm thickness, including clearing the area by cutting of shrubs, bushes, grass, vegetation, debris etc. stacking and disposing out of plot area to an unobjectional area as directed by site Engineer complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer.
650
-
-
... More
Supply, Installation, testing & commissioning of GI Tape of 25 x 3 mm thick on parapet or surface of wall for lightning conductor complete with joints and other accessories as required.(for vertical run).
50
-
-
... More
Size - 4.0 Inch, Rating - 300#
7
-
-
... More
Addressable Hooters (for Safe area) along with all mounting & other accessories as per the tender specifications.
1
-
-
... More
Size -12.0 Inch,300#, Thk/Sch - 6.4 mm , Material - ASTM A234 GR.WPB, Dimn. Std. - ASME B 16.9
3
-
-
... More
Size - 4.0 Inch, Thk/Sch - STD, Material - ASTM A 333 GR.6,BE SEAMLESS
24
-
-
... More
1/3" Day-Night Colour True IP Network Fixed Camera , focal length 4 to 8 mm or better, with IP 66 weatherproof housing, in-built lightning & surge protection, suitable mount, camera mounted interfacing junction box as applicable complete with cables, connectors, required interfaces etc. as per tender specifications including necessary erection hardware, poles, brackets etc. with flexible / rigid conduit and all other accessories as required.
8
-
-
... More
MECHANICAL/PIPING
-
-
-
... More
1:3:6 (1 cement : 3 coarse sand (Zone-III) : 6 graded stone aggregate 20 mm nominal size)
14
-
-
... More
Wiring for 250 V single phase and neutral 16 amps modular power plug point with PVC insulated 4 sq. mm. copper conductor wires for phase & neutral, 650 V grade including earthing, the third pin with 2.5 sq. mm copper conductor earthing insulated continuity wire, complete with providing and fixing of 6 pin 16/6A modular socket and 20/10 A modular switch (1 plug point per circuit) as per specifications and drawings
10
-
-
... More
CABLE
-
-
-
... More
Gravel packing in tubewell construction in accordance with IS:4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of the Engineer-In-Charge.
2
-
-
... More
Size -8.0 Inch,300#, Material- Bolt: ASTM A193 GR.B7 Nut: ASTM A194 GR.2H, Dimn. Std. - ASME B 16.9
36
-
-
... More
1:4:8 (1 cement : 4 coarse sand (Zone-III) : 8 graded stone aggregate 40 mm nominal size)
74
-
-
... More
Installation of above ground Butt Welded Valves (Ball / Plug / Check / Gate / Globe) as per details given below:
-
-
-
... More
SIZE: 2P X1.5 SQMM
80
-
-
... More
Supply of UPS & UPS Panel
-
-
-
... More
Supply, Installation, testing & commissioning of 230 V, Electrical Siren
1
-
-
... More
Supplying and using water proofing compound like CICO, PUDDLE or any other approved brand with Cement Plaster/ CC/ RCC complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of the Site Engineer.
170
-
-
... More
3C X 2.5 Sq.mm (CU) multi Stand
250
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
136
-
-
... More
Providing and laying 100 mm thick factory made cement concrete interlocking paver block of M-50 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour, shade and pattern approved by the Engineer-in-Charge for use in footpath/ pavement, joints filled with sand, ramming/ compacting the pavement, levelling, subase preparation etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and direction of the Engineer-in-Charge.
50
-
-
... More
Powder coated aluminium (Minimum thickness of powder coating 50 micron)
76
-
-
... More
Supply of BW Equal Tee as per details given below:
-
-
-
... More
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
95
-
-
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of the Engineer-In-Charge.
4
-
-
... More
Making Khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
8
-
-
... More
150 mm nominal outer dia pipes
15
-
-
... More
Supply and fixing of LED wall light cat. no. 35022 9W fitting of PHILLIPS or equivalent approved make complete with all accessories such as LED module, driver, optics, thermal sink, connector blocks etc including installation
5
-
-
... More
Supply, Installation, testing & commissioning off Maintenance free Earthing with GI earth pipe, 3.0 mtr long, 100 mm dia including accessories and providing masonary enclosure with cover plate having locking arrangement etc, (with charcoal and salt ) as required as per IS 3043. .
12
-
-
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
28
-
-
... More
450 mm dia. R.C.C. pipe
10
-
-
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
645
-
-
... More
110 mm
8
-
-
... More
Supply, stacking and mixing Cow Dung/ Neem oil cake/ Agro meal with earth in required proportion and spreading the mixture in lawn and or filling in specified areas inclusive of charges of all duties, royalty, cost of carriage etc. up to any distance. (Note: Cow Dung/ Neem oil cake/ Agro meal/ Manure shall be measured in stacks and will be reduced by 8% for payment).
60
-
-
... More
Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density).
-
-
-
... More
Size - 4.0 Inch, 300# ,Thk/Sch - 6.4 mm, Material - ASTM A234 GR.WPB (Charpy) Dimn. Std. - ASME B 16.9
4
-
-
... More
4C X 16 Sq.mm(AL)
200
-
-
... More
Providing and laying 52 mm thick cement concrete flooring with metallic hardner, under layer of 37 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer of 15 mm thick metallic concrete hardner consisting of mix 1:2 (1 cement : 2 stone aggregate 6 mm nominal size) by volume with which metallic hardening compound such as IRONITE NO. 1 of IRONITE CO. OF INDIA LTD. or aproved equivalent mixed in the ratio 4:1 (4 parts of cement : 1 part of metallic floor hardening compound of approval quality) by weight, inclusive of cost of finishing, labour, material, equipment, etc. as per specifications and directions of the Engineer-in-Charge.
29
-
-
... More
600 mm dia. R.C.C. pipe
10
-
-
... More
ELECTRICAL
-
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500 D or more
40000
-
-
... More
12" Sweep
4
-
-
... More
Beacons (Explosion Proof & Weather Proof) for hazardous areasalong with all mounting & other accessories as per the tender specifications.
1
-
-
... More
300 mm dia. R.C.C. pipe
40
-
-
... More
Supply, Installation, testing & commissioning of Hand operated Siren
1
-
-
... More
Sealed maintenance free 2V VRLA battery in dual string for 4 hrs backup considering aging, temperature & capacity factors complete with all interconnecting cables, glands, battery cables, battery stands, AC distribution boxes, connectors & lugs etc as per the tender specifications for 5 KVA UPS.
1
-
-
... More
IR Based explosion proof & weather proof (Point type) Hydrocarbon detectors along with all mounting & other accessories as per tender specifications.
2
-
-
... More
4.5 kg capacity CO2 fire extinguisher (portable)
2
-
-
... More
6.8 kg capacity CO2 fire extinguisher (portable)
1
-
-
... More
300 mm diameter
50
-
-
... More
SUPPLY OF RAIN CAP
-
-
-
... More
Providing and fixing first quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by the Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 Kg/sq.m., including pointing in white cement mixed with pigment of matching shade complete.
23
-
-
... More
Supply, Installation Chequred plate 8 mm thick, Scope including Cutting, fabrication, painting & installation at site works
500
-
-
... More
Size - 12.0 Inch, 300# ,Thk/Sch - 6.4 mm, Material - ASTM A234 GR.WPB (Charpy) Dimn. Std. - ASME B 16.9
10
-
-
... More
Supply of Weld Neck Raised Face (WNRF) Flanges as per details below:
-
-
-
... More
Supply, Installation & Laying, testing & commissioning of 25mm X 3 mm G.I strip complete with all accessories.
220
-
-
... More
Gas Detection System (GDS)
Design, detailed engineering, supply, configuration, testing, installation, erection and commissioning of gas detection system. Supply and Laying of cable inside the cable trench, cable tray for hardwired signals and power cables from gas sensors to gas detectors control unit including glanding, termination, ferruling, dressing etc. at both ends.
Supply of cable trays, installation and erection of cable trays and, supply of erection materials, cable ferrules, cable lugs, cable tie etc.
Folllowing items are included in the Gas Detection System:-
-
-
-
... More
Network Video Recorder/Failover NVR hardware as per specifications. The NVR Server shall be rack mount suitable for installation in Server Cabinet.
1
-
-
... More
2 kg capacity CO2 fire extinguisher (portable)
2
-
-
... More
Cables, Cables Trays and Junction boxes
Supply, laying, installation, erection of signals cable from field instruments to junction boxes including termination, ferruling, dressing etc.
Supply of cable trays, cables glands, junction boxes, erection materials, cable ferrules, cable lugs, cable tie.
Installation and erection of cable trays and junction boxes.
-
-
-
... More
Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, levelling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and levelling as directed, within a lead of 50 m & lift up to 1.5 m complete. (Note: Cost of sludge, manure or extra earth shall be paid for seperately under relevant item).
270
-
-
... More
Holes 1.2 metre deep and 1.2 metre diameter.
50
-
-
... More
Power cables LT : OD upto 20 mm
250
-
-
... More
Supply of Sockolet conforming to MSS-SP-97 as per details given below
-
-
-
... More
Supply of R=1.5D 90o BW Elbow as per details given below:
-
-
-
... More
Electrical Building Internal lighting Wiring
-
-
-
... More
Acid and alkali resistant tile
38
-
-
... More
Powder coated aluminium (Minimum thickness of powder coating 50 micron)
60
-
-
... More
Providing and fixing 15mm diameter C.P. brass stop cock with wall flange (Ref. Make: JAQUAR, Model: Cat. No. 0933 or approved equivalent), male end with C.P. copper connecting pipe 375mm long or as required including nuts, washers, C.P. brass flange etc. including cutting & making good the walls wherever required complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge.
12
-
-
... More
Supply and Installation of Rain Cap including all necessary fabrication works, including providing all necessary equipment's, labour, materials, consumables and inputs other than Owner supplied materials and performing all works as per drawings, data sheet, specifications enclosed with the Contract and directions of Engineer-in-Charge.
-
-
-
... More
150 mm nominal size dia having minimum wall thickness 5.00 mm
25
-
-
... More
All works above plinth level upto floor V level
200
-
-
... More
150 mm nominal size diameter
25
-
-
... More
All works for leak/burst (occurring during hydrostatic testing) including necessary repair/replacement of defective pipe length, including cutting and removing out defective pipes, welding, NDT of welds, repair and re-testing of defective welds, painting of welded joints, clean-up, re hydro testing of the pipe segment including providing all necessary equipment's, labour, materials, consumables and inputs other than Owner supplied materials and performing all works as per drawings, specifications enclosed with the Contract and directions of Engineer-in- Charge. Note:
a) This rate shall be applicable for manufacturing defects in Company supplied materials only.
12
-
-
... More
RADIOGRAPHY:
-
-
-
... More
15 mm nominal bore
6
-
-
... More
Size - 12.0 Inch
80
-
-
... More
Supply of Flanged Ends Ball Valves as per PMS and Data Sheet
-
-
-
... More
Providing and fixing 100 mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
11
-
-
... More
Cable Laying
Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cable racks, in trays, in protective pipes, poles,columns, in conduits, in panels and on structures etc.;including the supply and installation of all required materials such as fixing clamps ,screws, cable straps, tags etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all labour, tools, consumable materials etc. and cutting the cables in required lengths as per drawings, specification and directions of Site Engineer / Engineer-in-Charge
-
-
-
... More
Valve Junction Box -Electro Hydralic Operated Valves (EHOV) as per Datasheet and P&ID
Installation of valve junction box and their accessories inclusive of supply of necessary cable glands(double compression type), terminals and complete with cabling, glanding, termination and earthing followed by testing and commissioning of complete gas over oil actuated valve.
1
-
-
... More
Size - 4.0 Inch, 300# , Thk/Sch - 6.4 mm , Material - ASTM A105 (Charpy), Face/Finish - RF/125AARH , Dimn. Std. - ASME B16.5
2
-
-
... More
Supply, Installation & Laying, testing & commissioning of 25mm X 3 mm Cu strip complete with all accessories.
50
-
-
... More
Supplying, fabricating, erecting, placing and fixing in position M.S. structural works using rolled/ built up sections for truss, claddings, bracings, purlins, supporting frames made of joists, tubes, pipes, channels, angles, plates, flats, bars etc. including cutting to required size welding of joints, fixing anchor plates, including bolts, theading, nuts, washers, sleeves etc. including preparation of detailed fabrication drawings & submission to the Engineer-in-Charge for approval before start of fabrication, supplying & applying painting with two coats of epoxy paint "EPILUX 155 High Build Enamel over a coat of "EPILUX 610" Primer of M/s BERGER or any other approved equivalent make as per manufacturer’s recommendation, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Excluding the cost of concrete work).
8
-
-
... More
25 mm thick
18
-
-
... More
Stone screening 11.2 mm nominal size (Type B)
7
-
-
... More
Grassing with approved quality doob grass in rows of 7.5 cm apart in either direction, in lawns etc. including watering and maintenance of the lawn for 30 days or more till grass forms a thick free from weeds and fit for mowing including supply and filling good earth, if required, during maintenance period (Note: The good earth shall be paid separately under relevant item).
300
-
-
... More
Size - 4.0 Inch, Thk/Sch - 6.4 mm , Material - API 5L Gr. X-52 PSL 2, (CHARPY), BE, ERW/Seamless
36
-
-
... More
Size - 12.0 inch, 300#
8
-
-
... More
300 mm diameter
80
-
-
... More
32 mm diameter
6
-
-
... More
Angle Valve (Ref. Make: JAQUAR, Model: Cat. No. 0053 or approved equivalent)
12
-
-
... More
1:6 (1 cement : 6 fine sand)
2409
-
-
... More
Polished granite stone slab- Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
11
-
-
... More
Supply of Gaskets as per details given below:
-
-
-
... More
4C X 25 Sq.mm(AL)
75
-
-
... More
MS Structural Steel
0.75
-
-
... More
3.5C X 50 Sq.mm(AL)
100
-
-
... More
Addressable Multisensor Detectors, along with all mounting & other accessories for installation as per the tender specifications.
14
-
-
... More
Providing and fixing in position pre-moulded joint filler in expansion joints.
500
-
-
... More
Size - 4.0 Inch, 150# ,Thk/Sch - STD, Material - ASTM A420 GR.WPL6 Dimn. Std. - ASME B 16.9
6
-
-
... More
Providing & fixing galvanized chicken wire net 20 Gauge, 20 mm mesh size in plastering work at the junction of RCC Columns/ Beams & brickwork as directed by the Engineer-in-Charge.
237
-
-
... More
Supply & installation of miscelleneous installation material such as junction / terminal boxes for signal cable looping, surge protection devices, all types of cable glands, PVC conduit, clamping , fixing material and other installtion material, minor civil repair related to installation of detectors/laying of conduit & cables as per site requirement to complete the job in every respect.
1
-
-
... More
IR Based explosion proof & weather proof (Open Path type) Hydrocarbon detectors along with all mounting & other accessories as per tender specifications.
2
-
-
... More
Point wiring for power plug point with 4 sq.mm stranded PVC insulated copper wire including earthing the third pin with 2.5 sq. mm copper insulated earthing wire complete with supply and fixing of recessed mounted industrial type 3 pin 32 A metal clad socket and plug, 20A MCB (Motor duty) housed in a 16 gauge M.S. Box
5
-
-
... More
Supply of cables for Gas Detection System are included in below:
-
-
-
... More
Stainless steel liquid soap container (spring loaded push type) with lid and brackets fixed to P.V.C. cleats with C.P. brass screws, etc.
6
-
-
... More
Size - 8.0 Inch, Rating - 300#
1
-
-
... More
Cement concrete prepared with batch mixing machine
56
-
-
... More
Supply, Installation & Layin of Rubber mates(2 or 2.5mm thick X 0.9 or 1Mtr w , 1.1 KV) as per IS15652/IEC61111
2
-
-
... More
GST % for the tender
-
-
-
... More
7.5 HP
1
-
-
... More
Supply, Installation, testing & commissioning of Ceiling Fan of 1200mm sweep complete erected in position with all accessories.
5
-
-
... More
Supply of Bolts as per details given below:
-
-
-
... More
19 mm
50
-
-
... More
SUPPLY, INSTALLATION, TESTING & COMMISSIONING
-
-
-
... More
Water thinnable cement primer
1235
-
-
... More
Site misc. Materials
-
-
-
... More
WP Endura LED: Supply and fixing of surface mounted weather proof Endura LED WT 550 light fitting of PHILLIPS or equivalent approved make complete with all accessories such as LED module, driver, optics, thermal sink, connector blocks etc including installation
10
-
-
... More
CABLE LAYING: Laying of armoured / unarmoured cables (control / signalling/ Triad/ LT cable etc.) and installation / pulling of telephone cables of all type in trenches, in cable racks, in trays, in protective pipes, poles, columns, in conduits, in panels, in buildings, walls, ceilings, and on structures etc.; including the supply and installation of all required materials such as fixing clamps, screws, cable straps, tags etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect,as per specifications,drawings and directions of the SiteEngineer, including cost of all labour, tools, consumable materials etc. and cutting the cables in required lengths. Following items are included in Cable Laying:
-
-
-
... More
LED Ceiling Point: Supply and fixing of surface mounted LED ceiling light fitting type Mainstream spot Aura 15W of PHILLIPS or equivalent approved make complete with all accessories such as LED module, driver, optics, thermal sink, connector blocks etc including installation
15
-
-
... More
Supply, fabrication and erection of pipe/ equipment supports (for all sizes/ thickness) including shoes, pipes etc. as required, cradles, turn buckles, T-posts for all types of guides, anchors, special supports for cold/hot insulated pipes etc. if applicable, all necessary equipment, consumables, labour etc. for completing all works including supply of bolts, nuts, washers, U-clamps, wooden blocks etc. as required for supporting, supply and application of paints and primers suitable for normal corrosive painting environment as defined in contract document and as per standard specification for painting specification no. VPC-SS-PI-0008, Drawings, Specification, Standards, other provisions of Contract and instruction of Engineer-in-Charge.
-
-
-
... More
Nitrogen Supply
-
-
-
... More
25 KVA without AMF Panel
1
-
-
... More
12" x 0.75", 6000#, ASTM A105
6
-
-
... More
Providing and laying Burnt Terracota Tiles 12 mm thick for facia, over walls, sloping RCC Roofs etc. at all levels and locations laid over and including a backing coat of 15 mm thick cement mortar (1 cement : 3 sand) and joints filled with coloured cement of same colour as tiles complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge.
40
-
-
... More
SIZE: 12C X1.5 SQMM
120
-
-
... More
12" x 2", Thk/Sch - 6.4 mm X XS
8
-
-
... More
Supply of Nitrogen with cylinder for localized purging, Hook up of pipeline and piping.
30
-
-
... More
INSTALLATION OF VALVES
-
-
-
... More
Fire Fighting Equipment (Portable Extinguishers) Supply, installation and commissioning of the following fire fighting equipment
-
-
-
... More
CABLE LAYING: Laying of armoured / unarmoured cables (control / signalling/ Triad/ LT cable etc.) and installation / pulling of telephone cables of all type in trenches, in cable racks, in trays, in protective pipes, poles, columns, in conduits, in panels, in buildings, walls, ceilings, and on structures etc.; including the supply and installation of all required materials such as fixing clamps, screws, cable straps, tags etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect,as per specifications,drawings and directions of the SiteEngineer, including cost of all labour, tools, consumable materials etc. and cutting the cables in required lengths. Following items are included in Cable Laying:
-
-
-
... More
Performance of radiographic inspection of piping of all types, sizes, thickness including providing or hiring of all necessary equipment, supply of all consumables including radiographic films and whatever else even though not expressly mentioned but required to perform the work as per specification and instructions of Engineer-in-Charge. Contractor to submit DPR, Inspection Report along with Radiography Report to Engineer-in-Charge. Note :
a) All NDT including Radiography, MPT, LPT for 2" and below are covered under this SOR item. No separate payment shall be made. Radiography of piping joints as per details given below:
-
-
-
... More
PIPE SUPPORTS
-
-
-
... More
150 mm diameter
15
-
-
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
1235
-
-
... More
Rectangular Tank
1000
-
-
... More
Size - 8.0 Inch
5
-
-
... More
Providing and fixing 100mm wide Vertcal Fabric Blind system of VISTA/ MAC/ TRAC of approved make & shades complete along with standard accessories in required design/ shade as per manufacturer's recommendations, specification and directions of the Engineer-in-Charge.
21
-
-
... More
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
435
-
-
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of first quality conforming to IS:15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including pointing the joints with white cement and matching pigment, etc. complete.
11
-
-
... More
20 mm nominal outer dia pipes
10
-
-
... More
75 mm diameter pipe
15
-
-
... More
Supply, stacking and mixing sludge manure with earth in required proportion and spreading sludge manure in lawn inclusive of charges of all duties, royalty, cost of carriage etc. up to any distance. (Note: Sludge/ manure to be measured in stacks and will be reduced by 8% for payment).
60
-
-
... More
Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade.
120
-
-
... More
50 mm
25
-
-
... More
Supply, Installation of Caution Board
2
-
-
... More
150 mm dia. R.C.C. pipe
5
-
-
... More
FITTINGS
-
-
-
... More
Providing and fixing 75mm diameter P.V.C. pipe (4 Kg/sq.cm) for Weep Holes in Masonry/ RCC wall including providing 230x230x230 mm size (approx.) filter using pebles of 40mm & down size in every weep hole on retaining side etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge.
85
-
-
... More
Supply, Installation & Laying, testing & commissioning of 50mm X 6 mm G.I strip complete with all accessories.
500
-
-
... More
450 mm diameter piles
32
-
-
... More
With stainless steel cover plate minimum 1.25 mm thickness
11
-
-
... More
Size -4.0 Inch,300#, Material- Bolt: ASTM A320 GR.L7 Nut: ASTM A194 GR.4, Dimn. Std. - ASME B 16.9
30
-
-
... More
CCTV System
Design, detailed engineering, supply, configuration, testing, installation, erection and commissioning of CCTV system. Folllowing items are included in the CCTV System:-
-
-
-
... More
1:1.5:3 (1 cement : 1.5 coarse sand (Zone-III) : 3 graded stone aggregate 20 mm nominal size)
40
-
-
... More
With common burnt clay F.P.S. (Non-modular) bricks of class designation 7.5
1
-
-
... More
Receiving and taking over of all Owner supplied materials, equipment's from Owner's designated place(s) of issue, loading , unloading, handling from Owner's designated place(s) of issue to Contractor's own stock yard(s)/ work site(s)/ work shop(s) including arranging all necessary intermediate storage area(s) thereof, as required; supply of all materials, equipment, consumables as defined in Contractor's scope of supply and its transportation to the work site(s);installation of valves, flow meters, strainers, equipment's including fixing of gaskets, bolts, studs, nuts wherever required, levelling, aligning, installation and assembly of accessories including accessories for actuators including making electrical connections for such actuators, if any, by bolting/ threading or welding of pipes at all elevations, testing, completing all works in all respects as per drawings, specification, other provisions of Contract and directions of the Engineer-in-Charge.
-
-
-
... More
Providing and making Construction/ Contraction joint by mechanically cutting 12mm x 25mm deep groove and filling with bituminous sealing compound including cleaning etc. complete as per drawing, specifications and directions of the Engineer-in-Charge.
45
-
-
... More
Providing and fixing self cleaning S.C.I. heavy quality Floor/ Nahani trap with 100mm diameter inlet and 100mm diameter outlet, 125mm C.P. brass grating (heavy type) with or without vent arm including cost of cutting and making good the walls and floors, jointing with lead caulked joints, connecting with waste water pipe etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.
4
-
-
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers
690
-
-
... More
FLANGES
-
-
-
... More
4 Nos. Sand Buckets with stand & canopy
4
-
-
... More
Client Workstation along with licensed Operating System Software, Keyboard with Joystick along with required cables, connectors, interfaces complete as per specifications.
1
-
-
... More
Solar System for RCP Locations (Capacity 6 KWp) as per specifications
1
-
-
... More
Size - 12.0 Inch, 300#, Material - ASTM A105 (Charpy), Face/Finish - RF/125AARH , Dimn. Std. - ASME B16.48
3
-
-
... More
Explosion Proof / Weather Proof Hooters (for hazardous area) along with all mounting & other accessories as per the tender specifications.
1
-
-
... More
Supplying and fixing Road Hump of minimum size 350 mm width x 50 mm thick made of Carbon Black mixed Rubber with Additive of LDPE for reinforcement & UV resistant colouring agent of black & yellow colour with 4 reflective glass beads, of weight not less than 16 Kg/metre, and capacity to withstand minimum 35 tonne weight (moving vehicle load) including cleaning the road surface of all dirt, scales, oil, grease and foreign material etc. and fixing the hump on the Road top as per manufactures specifications with necessary fasteners complete in all respects inclusive of cost of all labour, materials, fasteners, tools, tackles etc. as per specification and direction of the Engineer-in-Charge.
5
-
-
... More
OUTDOOR LIGHT FITTINGS :
-
-
-
... More
Supply of above ground Carbon Steel Process Piping as per details given below
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
60
-
-
... More
32 mm nominal bore
4
-
-
... More
Supply, Calibration and Installation of instrumentation items listed below:
(For details, refer instrumentation specifications)
-
-
-
... More
Supply, Installation, testing & commissioning of Electrical / Control Panels suitable for 415 Volt,3phase,3wire 50Hz AC supply system fabricated in compartmentlized from CRCA sheet steel not less than 2mm thick duly treated with 7 tanks process, powder coated with approved shade and oven dried . The complete panel will have a short circuit with stand capacity of 35 KA for 1 Second, IP 42 rating. It will have a suitable MS base channel powder coated. The panel will be fabricated in transportable sections. The panel shall have a common copper earth bar of size 25mm x 5mm at the rear with 2 Nos. earth studs. The LT panel will have suitable arrangement for bus-ducting/ cable termination into various incoming/outgoing switchgear as required. Cable termination will be at suitable terminal block at top/bottom of the panel and from the terminal block to switch, connection will be made with solid insulated strip/PVC insulated copper conductor cable of required current rating as required as per SLD.
-
-
-
... More
AIR CONDITIONER SPLIT TYPE - Supply & Installation of 1.8T Split Type five star BEE rated ACs (Daiiken / Hitachi / Carrier) along with 5KVA Voltage Stablizer & MS stand for outdoor unit, refregerant piping, drain piping complete as per instruction of EIC / Site Engineer
3
-
-
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
6
-
-
... More
Providing & fixing Angle Valve (Ref. Make: JAQUAR, Model: Cat. No. 563 or approved equivalent) and Health Faucet with flexible tube 8mm diameter x 1.5 m long (Ref. Make: JAQUAR, Model: Cat. No. 549 or approved equivalent).
3
-
-
... More
1000 mm dia. R.C.C. pipe
5
-
-
... More
All kinds of soil
850
-
-
... More
Size -4.0 Inch x 2.0 Inch, 300#, Thk/Sch - XS x XS , Material - ASTM A350 GR.LF2, Dimn. Std. - ASME B 16.9
2
-
-
... More
Wiring with PVC insulated 2.5 sqmm copper conductor wire for phase & neutral , 650 V grade including earthing , the third pin with 1.5 sqmm copper conductor earthing insulated continuity wire for exhaust/ wall bracket fan including providing and fixing of 5 pin 6 A modular socket and 10 A modular switch near the door or as as per specifications and drawings. The circuit wiring shall be with 4 sq. mm PVC copper wire from switchboard to 1st exhaust fan for multiple exhaust fans in one circuit.
3
-
-
... More
White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap
5
-
-
... More
Ordinary rock
85
-
-
... More
Size - 12.0 Inch, Thk/Sch - 6.4 mm , Material - API 5L Gr. X-52 PSL 2, (CHARPY), BE, ERW/Seamless
120
-
-
... More
Size - 8.0 Inch, 300#, Material - ASTM A105 (Charpy), Face/Finish - RF/125AARH , Dimn. Std. - ASME B16.48
1
-
-
... More
250 mm dia. R.C.C. pipe
30
-
-
... More
10 kg capacity DCP fire extinguisher (trolley mounted)
19
-
-
... More
Powder coated (Minimum thickness 50 micron) aluminium tubular handle bar
11
-
-
... More
5 kg capacity DCP fire extinguisher (trolley mounted)
2
-
-
... More
Supplying, fitting and fixing punched tape concertina spiral coil of 50 turns per coil having core wire of 2.6 mm diameter made of high carbon spring steel of high tensile strength as per IS:4454 (Part-I, Grade-II) having minimum galvanising coating thickness equivalent to 230 grams per square metre and low carbon steel strip of 0.5 mm thickness having a series of barbes punched all along the length on both sides of the strip at regular interval as per IS:513, DD quality having minimum galvanising coating thickness of 12 microns. Hardness of tape should be between 137-180 VPN (Victor Penetration Number). The coil should be clipped sufficiently at regular intervals. The coil should not be stretched for more than 6.0 m length and the minimum diameter of the coil in the closed condition should not be less than 600 mm complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.
200
-
-
... More
Response Indicators used in below false ceiling and cable trench, along with all mounting & other accessories as per tender specifications.
8
-
-
... More
WORKS FOR CGS STATIONS (PIPING & MECHANICAL)
-
-
-
... More
With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
130
-
-
... More
Bolts & Gaskets
-
-
-
... More
Supply, Installation & Laying, testing & commissioning of GI wire / rope 10 mm diameter
100
-
-
... More
EARTH ELECTRODES
-
-
-
... More
Filling with available fly ash and earth (excluding rock) in trenches or embankment in layers (each layer should not exceed 15 cm), with intermediate layer of compacted earth (Soil density of 98%) after every four layers of compacted depth of fly ash, sides & top layer of filling shall be done with earth having total minimum compacted thickness 30 cm or as decided by Engineer -in-charge, including compacting each layer by rolling/ ramming and watering, all complete as per drawing and direction of the Engineer-in-Charge.
92
-
-
... More
Supply, installation, testing of earthing system consisting of earth pits of perforated GI pipes earthing electrodes and copper plate terminal block including construction of chamber using cement concrete with earthing pit cover and frame, supply of charcoal / /special backfill , salt etc including supply of interconnecting cables / strips including necessary welding etc complete as drawings, specifications and directions of the site engineer/Engineer-in-charge, including cost of tools, materials etc complete in all respects as per drawing No. :9200-99900-405-030-00. The job shall also include testing of each earth pit and the entire earthing system on whole. Note: Earthing for field instruments shall be provided from Station earth grid covered in Electrical SOR.
3
-
-
... More
Cables having outer diameter upto 20mm
220
-
-
... More
Size - 4.0 Inch, 300# , Thk/Sch - 6.4 mm , Material - ASTM A105 (Charpy), Face/Finish - RF/125AARH , Dimn. Std. - ASME B16.5
12
-
-
... More
PVC Conduit pipes
Supply, installation, fixing in position, PVC conduit pipes, of ISI marked , in concrete, brick work etc. during or after construction by making grooves in the wall, ceiling etc. cutting threads and jointing the pipes with PVC couplers, providing necessary tees, bends, junction boxes etc. with 12 SWG GI wire inside conduit without joint for concealed wiring, including making good the concrete, brick work, surfaces etc. complete as per drawings and direction of Site Engineer / Engineer-in-charge including cost of all labour, materials etc.
-
-
-
... More
Supply, Installation, testing & commissioning of GI strip of 25 x 3 mm thick on parapet or surface of wall for lightning conductor complete with joints and other accessories as required.(for horizental run).
70
-
-
... More
Size of Tile 600x600 mm
77
-
-
... More
3 mm thick
200
-
-
... More
Bib Cock (Ref. Make: JAQUAR, Model: Cat. No. 0021 or approved equivelent)
12
-
-
... More
750mm x 750mm x depth up to 1000mm inner dimensions
1
-
-
... More
Supplying, fitting and fixing hot dip galvinised barbed line wire through holes in fencing posts (already made in the body of the post), tightening and fixing the wire in tight condition with straining bolts (straining bolts at end post) including the cost of cutting and lapping joints, making holes, straining bolts, galvanised staples, binding wires etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of the Engineer-in-Charge.
800
-
-
... More
Exhaust fan
Supply, installation, testing of single phase 230 V, industrial type heavy duty exhaust fan of GEC/Usha/Crompton Greaves or of approved make as per appendix -1 fitted/ provided with louvres, supports etc. including making the required opening on walls, fixing and connecting the wires etc. including earthing the body of the fan, making good the opening on the wall etc. complete as per specifications, drawings and direction of Site Engineer including the cost of all labour, tools, materials etc. complete.
-
-
-
... More
With float glass panes of 5.50 mm thickness
60
-
-
... More
Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000x450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos. cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of the Engineer-In-Charge.
5
-
-
... More
Installation of above ground Flanged Valves (Ball / Plug / Check / Gate / Globe) as per details given below:
-
-
-
... More
Size - 4 Inch, 300#, Flanged Ends, Design Standard - API 6D, Floating type, Reduced Bore Ball Valve, Lever Operated ASTM A352 GR.LCC
1
-
-
... More
150 mm nominal size diameter
20
-
-
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of the Engineer-In-Charge.
4
-
-
... More
With common burnt clay F.P.S. (Non-modular) bricks of class designation 7.5
4
-
-
... More
Two coats
1235
-
-
... More
Supply, erection & installation of cable conduits made up of GI pipes of medium class 'B' subject to owner's approval in trenches (already made), on walls, concrete structure etc., including supply and installation of all the necessary pipe fittings such as bends, sockets, elbows, tees etc., bending, threading, binding, clamping, providings, spacers, plugs, packings, bushings etc., as required Job complete in all respects including the cost of all labour, tools, material etc. and as per specifications and directions of site engineer / Engineer-in-Charge.
-
-
-
... More
25 mm
50
-
-
... More
Carrying out topographic survey/ mapping survey including Identifying & plotting the existing facilities for a radius of 100m from the each corner of the plot in all types of land involving mapping with advanced equipment (total station) plotting the existing underground and over ground facilities with type, size, height, function of structure in all respects as per drawing, technical specification and the direction of engineer-in-charge and submission of all drawings, reports, maps made in Auto CAD in 4 sets, along with the soft copies in CD/ External Hard disk. (1) Existing facilities including roads, buildings, type of buildings (Commercial/Industrial/Residential/School etc.),vacant land, Trees, Nalla, Canal, Inter-distance between plot edges and surrounding building in terms of G/G+1/G+2 etc., name of the roads, nearby km stone from the plot are to be covered in the survey. (2) Clearing of bushes/vegetation/cutting and removing tree branches (if required) are under the scope of the contractor (3) Arranging all Manpower, equipment, tools etc. required for the execution of the work are to be arranged by the contractor
62500
-
-
... More
8" x 2", Thk/Sch - 6.4 mm X XS
1
-
-
... More
20 mm nominal outer dia pipes
30
-
-
... More
300 mm diameter
5
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Begusarai, Bihar