North Eastern Handicrafts And Handlooms Development Corporation Limited Tender

Cocoon Opener: Drums size - 30" dia x 30" width; Drum RPM: 150 fitted with 3 HP Motor

Fibre Cutter: Circular blade type cutting machine with feed lattice and feed roller, provision for speed variation of lattice and feed roller changes; machine width: minimum 30"

Pre-Opener: Willow machine; Cylinder dia: 51' with 2 Nos. of Spike Steel under casing, number of Spikes: Minimum 72; Feeding Lattice size: Minimum 56" x 105"; Delivery lattice size: Minimum 18" x 206"; Machine speed 360 RPM, Cleaning Blower speed 1000 RPM; Waste ejection through Screw Conveyor

Winding Machine for Spun yarns such as Ring spun, OE Count Range from 1 NE to 120 NE Double Side Construction ; No. of Spindles: (12 + 12) 24, Traverse: 6" (150 mm), Traversing System: Aluminium Hard; Brushless motor with DC Drive and individual Converter on every spindle; Anodized Drum with precision 95 mm: 2 Turns with 1.Electronic stop motion Speed Control and anti patterning by Inverter Drive with Panel, AC Drives Length Control System 2 tum drum Yarn clearer of Uster Without Auto Doffing With over head Blower

Assembly Winding machine equipped with individual drum driven Length measuring device, Individual yarn sensor device, Inverter driven Delivery package etc. 36 positions

Two for One Twisters equipped with Cradle lifting machine, Top tray arrangement; Pot dia 180 mm and 120 mm; Ceramic quoted discs; Stop motion after breakages of yarn; Traverse: 152 mm; Count range: 20 Nm 2/100 Nm, 2/120 Nm; Feed package: Cheese; Twist range: 2.5 TNI to 43 TPI Anti Patterning Device; Delivery package: PSDP or cone TFO package dimension: Package length - 172 mm; Traverse length -163 mm to 165 mm. 36 positions

Gas Singing machine: Individual drum drive; Individual yarn sensor and stop motion; Should have mixing chamber for air and gas; There must be adjustment for air and gas pressure; Should have overhead blower; Should have over feed rollers, 24 Drums

Reeling machine: 80 peg machine, 40 pegs each side Hank dia: 1.37 meter; Equipped with digital counter meter and auto stop after full doff

Bailing Including bailing press Hydraulic pressing System

Bundling Machine: Capacity 5 kg; Hydraulic pressing System

HTHP Dying machine: Multi Pot Dyeing Machine - 15 kg/pot; Vertical Pot - 2 No, -Mounted on a common table top, Material of Construction : SS-316 L, Self-sealing Rapid Locking Top Lid, Safety device which functions automatically after0.25kg pressure builds in the dyeing vessel, Carrier forLoose Hanks – To accommodate 15 kg Eri Silk Hanks, Material of construction – SS 316 L, Complete with locking fly nut.Single Stage Turbo Pump - 3 Phase AC induction motor (IE -2) – 5 Hp/ 2800 rpm, Inverter Drive for varying the speed/flow of Turbo pump, MLR – Fully flooded - 1:6.5, With Air pad : 1:6, Dozing System – 2 No.-Vertical Tank of 20 % capacity of main Vessel made of SS 316, Injector Pump – 1 Hp/2800 Rpm, Inverter Drive for varying the speed/flow of Dozing pump, Electric Heating - 1 Set - 4 Kw x 3 No = 12 Kw Heating Load, MOC of Heaters: SS-316, Cooling Coil – 1 No – Suitable for Cooling, M.O.C : SS-316L Seamless Pipe; Control Valves pneumatically operated for Cooling, Vessel fill, Vessel drain, Overflow, De-Pressure, Dozing tank drain & Coupling System– 2 Set, Manifold fitted with solenoid valve with 24V DC coil for Cooling, Vessel fill, Vessel drain, Overflow, De-Pressure, Top lid safety device, Dozing tank drain &Coupling System – 2 Set, Spring Loaded Over Pressure Relief Valve – 2 No, Pressure Gauge – 4 No, Air-Pad system – 2 No, Air filter regulator–1 Set, Water Level Sensor – 6 No, Proximity sensor – 2No,Temperature Sensor – 4 No, Pressure switches – 4 No, Pneumatics Control Box– 1 Set, Table Top Frame, Power Control Panel with dyeing programmer. Beaker Dying Machine: Vertical Rectangular Cabinet, Made of AISI- SS- 304, Top Loading, 10 No. Beakers, Capacity 130 ml, Leakage proof, Pressure Sealing Lids, Tong Picker, Carrier For holding Beakers inside the cabinet, Mounted on the Shaft for forward/reverse rotation, Beaker Stand For holding 10 no. Beakers outside the cabinet, Modern, compact and practically designed machine frame, Temperature Sensor, Proximity Sensor, Reduction gearbox, Direct mounted, Laser aligned, fitted with Electric motor – 1/2 Hp-30 RPM, Heating By Electric Tubular heaters - 4 KW (2 KW x 2 No), Cooling Coil For cooling down the beaker temperature before unloading, Made of SS 316 seamless pipe, With Necessary valves & fittings, Power Control Panel with dyeing programmer. Hydro Extractor - 50 Kg; Perforated Basket – 1 No., Made of AISI- SS- 304, Outer Drum Top Lid, Top Lid, Inner Perforated Basket, Safety Covers, Base Frame, Direct Drive Operation, DBR, Limit Switch– 1 No, Electric Motor - 7.5 HP/1440 RPM, Power Control Panel.