Military Engineer Services Tender

All as per item No 3 here in after but Deep freezer of any capacity complete all as specified and as directed by the Engineer-in-charge.

All as per item No 3 here in after but refrigerator of any capacity complete all as specified and as directed by the Engineer-in-charge.

M&L Pressure testing / leak arresting , vaccumising with dry nitrogen gas / oil charging, incl replacing the unserviceable strainers and capillary tubes all as required testing complete for the Split Type AC 1.5/2.0 TR including transportation to workshop.

All as per item No 6 here in after but Deep freezer of any capacity complete all as specified and as directed by the Engineer-in-charge.

All as per item No 6 here in after but refrigerator of any capacity complete all as specified and as directed by the Engineer-in-charge.

M&L Gas charging with R-134a for Refrigerator/Deep freezer in position including leak testing to achieve desired suction pressure and temperature complete all as specified and as directed by the Engineer-in-charge.

M&L Gas charging with R-22a for split type AC in position including leak testing to achieve desired suction pressure and temperature complete all as specified and as directed by the Engineer-in-charge.

Supply only Condenser blower motor for Outdoor Split type type AC 1.5 / 2 TR capacity complete all as specified and as directed by the Engineer-in-charge.

All as per item No 11 here in after but refrigerator/Deepfreezer of any capacity complete all as specified and as directed by the Engineer-in-charge.

M&L for servicing of complete indoor/outdoor unit of central heating system of capacity 150000 K Cal/Hrs complete by cleaning of ducts and servicing of blower/Burner etc and ensuring its serviciblity by rectification/replacement of unserviceable parts and keeping the heating system in good working condition.

S& F Digital Temp controller of heating plant complete complete all as specified and as directed by the Engineer-in-charge.

S&F Alarm Hooter for central heating plant complete all as specified and as directed by the Engineer-in-charge.

M&L for painting of plant complete with good quality paint complete all as specified and as directed by the Engineer-in-charge.

Supply and fixing blower belt suitable for hetaing plant blower complete all as specified and as directed by the Engineer-in-charge.

Supply and fixing of indication lamp for plant panel complete all as specified and as directed by the Engineer-in-charge.

M&L for servicing of oil burner of plant complete all as specified and as directed by the Engineer-in-charge.

S&F Oil pipes of suitable for heating plant as per exiting size complete all as specified and as directed Engineer-incharge.

M&L for earthing complete with galvanised steel earth plate electrode 60cmX60cmX6mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level)with top edge of the plate not less than 1.5 metres below normal groundlevel, connected to galvanised earth lead strip 32x6mm by means of volts, nuts, check nuts and washers of galvanised iron or steel connected to earthing test point all as specified or indicated including excavation and connected earth work in hard/dense soil, PCC 1:3:6 type C-1 as in pit, 20mm dia GI pipe medium grade for watering pipe, 15 mm bore GI medium grade earth lead protection pipe, 50 mm thick RCC 1:2:4 type B-1 cover slab of earth pit reinforced with 8 mm dia TMT bars @ 10 cm C/C both ways and with handle made out of 10 mm dia bars, funnel, strainer,charcoal and testing on completion complete all as specified and as directed by the Engineer-in-charge.