Municipal Corporation Tender

C.C. DRAIN AND R.C.C. CULVERT;Conveyance of Excavated earth/ Dismantled Debris with a lead of 1KM for filling in low laying areas as directed by the Departmental Authorities.

C.C. DRAIN AND R.C.C. CULVERT;Collection and supply of River Sand from approved river bed and filling sand irrespective of thickness, sectioning, leveling and ramming including cost and conveyance of the material and all labour charges etc., complete as per Standard Specifications

C.C. DRAIN AND R.C.C. CULVERT;Plain Cement Concrete (1:4:8) (Cement: Fine Aggregate: Coarse aggregate) for foundations and under flooring bed using course aggregate 40mm size hard machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site including cost and conveyance of all the materials and including all charges for machine mixing, laying, concrete in foundations and under flooring bed of 0.10 Mts. layer ramming finishing top surface to the required level curing etc., complete for finished item of work

C.C. DRAIN AND R.C.C. CULVERT;Providing Cement Concrete (1:3:6) mix using 20mm Size Hard Granite Machine Crushed Chips S.S.5., full blasted screened free from dust and from approved quarry including mixing, laying, curing the C.C., cost and conveyance of all the materials to work Spot etc., complete as per Standard Specifications.DRAIN SILL without form work.

C.C. DRAIN AND R.C.C. CULVERT;Providing Cement Concrete (1:3:6) mix using 20mm Size Hard Granite Machine Crushed Chips S.S.5., full blasted screened free from dust and from approved quarry including mixing, laying, curing the C.C., cost and conveyance of all the materials to work Spot etc., complete as per Standard Specifications.DRAIN WALL with form work.

C.C. DRAIN AND R.C.C. CULVERT;Providing Plastering in Cement Mortar (1:4) mix 12mm thick and top surface rubbed smooth including cost and conveyance of all the material and all labour charges etc., complete as per Standard Specifications.

C.C. DRAIN AND R.C.C. CULVERT;Reinforced Cement Concrete M 20 Nominal Mix (Cement, Fine Aggregate, Coarse aggregate) corresponding to table - 9 of IS - 456 using 20mm size graded machine crushed hard granite Chips (Coarse aggregate) from approved quarry including cost and conveyance of all materials like Cement, Fine Aggregate (Sand), Coarse Aggregate, Water etc., to site and including sales and other taxes, on all materials including all operational, incidental and labour charges such as machine mixing, laying, concrete, curing, centering, Shuttering etc., complete (Page No.664) BLD CSTN-2-13, S.No.21 {FOR CULVERT SLABS}

C.C. DRAIN AND R.C.C. CULVERT;P.C.C. grade M 20 (MORD) Providing Plain Cement Concrete Nominal Mix (1:2:4) using using 20mm nominal size Graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH. for Approaches etc. (for Mechanical Mixer)

C.C. DRAIN AND R.C.C. CULVERT;Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including leveling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying deboning strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14 - days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD.

C.C. DRAIN AND R.C.C. CULVERT;Providing High yield strength deformed (HYSD) steel bars (Fe415/ Fe500 grade as per IS:1786-1979) of different diameters for RCC works, including labour charges for straitening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. complete for finished item of work in all floors (APSS No:126)

C.C. DRAIN AND R.C.C. CULVERT;Supply delivery and fixing in position of M S Iron grills of any design approved by the departmental authorities using required sizes of M S materials including all cost, conveyance of material and all Labour charges for fabricating steel works like window grills, compound wall grills, iron doors, window including cost of welding rods, power charges excluding cost of fixing in position finished item of work.