Department Of Education Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Department Of Education - DoE Tender
Civil And Construction
Building Construction
Opening Date28 Feb 2024
Closing Date4 Mar 2024
Tender Amount₹ 20,22,122
Costs
EMD
₹ 20,221Document Cost
Refer DocumentsTender Fee
₹ 7,500
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
727165Bid Award Id
ViewTender No
8/23-24/APSS/AKP Dt.27.02.2024 of the Executive Engineer APSS Anakapalli.Tender Authority
Department Of Education ViewPurchaser Address
-Website
http://tender.apeprocurement.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for Footings
61.89
486454
7859.98
Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for Pedestals
13.3
110778
8329.21
Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for Plinth Beams.
32.52
329206
10123.19
Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for columns of G.F
34.35
343916
10012.11
Random Rubble stone masonry in CM (1:6) using hard variety of Granite stones from approved quarry including cost and conveyance of all materials and all labour charges etc., complete for finished item of work for foundation and basement.
110.03
334916
3043.86
Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Beams G.F
39.71
339015
8537.26
Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slab 125mm thick G.F
872.26
897643
1029.1
Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for Waist Slab 175mm thick G.F
36.9
48132
1304.4
Brick masonry in CM (1:8) with bricks of traditional size 23 x 11 x 7 cm 2nd class including cost and conveyance of all materials and all labour charges etc., complete for finished item of work for Superstructure.GF
196.15
1168505
5957.2
Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for lintels
13.61
120242
8834.84
Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for 75mm thick at fixed end & 50mm thick at free end with an average thickness of 62.5 mm etc., complete Sunshades G.F
83.64
67132
802.63
Refilling with useful available excavated earth in trenches, sides of foundations, basement with initial lead in layers not exceeding 15cm. thick, consolidating each deposited layer by watering and ramming, including cost, seignorage charges and conveyance, water to work site and all operational, incidental, labour charges, etc. complete for finished item of work
419.99
161188
383.79
Filling carted gravel in trenches, sides of foundations, basement etc. from approved quarry/ available sources in layers not exceeding 15cm. thick, consolidating each deposited layer by watering and ramming, including cost, seignorage charges and conveyance, water to work site and all operational, incidental, labour charges, etc. complete for finished item of work as per SS 309 and 310.
522.96
135468
259.04
Plastering 12mm thick in two coats with base coat of 8mm thick in CM(1:6) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer-in-charge etc., complete for finished item of work for internal surfacaes. (SS 901,903 & 904) (For Internal surfaces) for GF
1734.13
604102
348.36
Plastering 20mm thick in two coats with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer-in-charge etc., complete for finished item of work for External surfacaes.(SS 901,903 & 904) for GF
1257.85
452147
359.46
Plastering to even surfaces of wall with CM (1:5) Prop: 20mm thick in single coat including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work
920.48
262954
285.67
Ceiling plastering with CM (1:3), 12mm thick including cost and conveyance of all materials and all labour charges etc., complete.
920.48
262954
285.67
Flooring with Vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC Roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand, water and tiles etc., complete for finished item of work.
839.02
734898
875.9
Providing skirting to internal walls to 15 cm height/ risers of steps with vitrified tiles length equal to flooring stones set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work.
47.55
41834
879.8
Painting to new walls with Two coats of plastic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making Three coats in all to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS911 for internal walls in GF
2459.9
340844
138.56
Painting to new walls with Two coats of plastic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making Three coats in all to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS911 for external walls in GF. (APSS No. 912)
1862.57
271097
145.55
Painting to new wood work with Two coats of ready mixed synthetic enamel paint first quality all shades to give an even shade over base coat of primer with luppam finishing thouroughly brushing the surface to remove all remains including cost and conveyance of all materials to site, all operational, incidental and labour charges etc., complete for finished item of work in GF
102.06
15474
151.62
Plain Cement Concrete (1:2:4) prop. nominal mix size using 20mm hard broken graded granite metal including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete for finished item of work (APSSNo.402)
2.43
11691
4811.14
Providing and fixing of openable windows with Fly-mesh made of pre - painted steel (base steel as per IS 513 of 0.58mm thick, galvanized as per IS 277 with zinc of 150 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer and the section for outer frame of 72x55mm, center mullion should be of 48x50mm, centre mullion of 72x50mm, section for fixed glass beading section of 12x12mm and section for shutters of 48x25mm and outer frame & mullion sections with rebate for glazed shutters, fly mesh and a 20mm provision for guard bars/grills and fly mesh shutter section of 20x40mm and the sections cut to length metre joined with corner bracket, centre mullions fixed with mullion cap, stay, handles, latch 2 nos of heavy duty stainless steel pivot hinges per shutter and panelled with 5mm thick plain float glass and S.S.Mesh for fly mesh shutter (304 grade), fitted using rubber gaskets including fixing the windows in the concrete/masonry wall by means of self expanding screws including 10mm square guard bars with 6" (152.4mm)pitch, complete for finished item of work (centre fixed both side openable shutter window 5'0"x4'0" (1524mmx1219.2mm). Outer frame section size of 72x50mm. Shutter frame section size of 48x25mm. Mullion section size of 72x50mm. Fixed beading section size of 12x12mm) (BMT-P.24)
54
406457
7526.99
Supply, fitting and placing HYSD bar reinforcement as per Fe 415 grade as per IS 1786-1979 and mild steel bars (Fe 250 grade as per IS 432 ) in RCC work complete as per drawings and tecnical specification for bars below 36mm including over laps and wastages where they are not welded and tying with binding wire of 20 SWG, formining grills for reinforcement work cost and conveyance of binding wire,cover blocks and all incidental,operationl,labour charges such as cutting, bending, placing in position, tying etc., complete for finished item of work.
38000
2063780
54.31
Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for columns of F.F
34.35
343916
10012.11
Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Beams F.F
39.71
339015
8537.26
Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slab 125mm thick F.F
872.26
897643
1029.1
Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for Waist Slab 175mm thick F.F
36.9
48132
1304.4
Brick masonry in CM (1:8) with bricks of traditional size 23 x 11 x 7 cm 2nd class including cost and conveyance of all materials and all labour charges etc., complete for finished item of work for Superstructure.F.F
196.15
1168505
5957.2
Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for lintels F.F
13.61
120242
8834.84
Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for 75mm thick at fixed end & 50mm thick at free end with an average thickness of 62.5 mm etc., complete Sunshades F.F
83.64
67132
802.63
Providing Impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance of all materials all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., complete for finished item of work.
872.26
332165
380.81
Plastering 12mm thick in two coats with base coat of 8mm thick in CM(1:6) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer-in-charge etc., complete for finished item of work for internal surfacaes. (SS 901,903 & 904) (For Internal surfaces) for F.F
1734.13
604102
348.36
Plastering 20mm thick in two coats with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer-in-charge etc., complete for finished item of work for External surfacaes.(SS 901,903 & 904) for F.F
1257.85
452147
359.46
Ceiling plastering with CM (1:3), 12mm thick including cost and conveyance of all materials and all labour charges etc., complete.for F.F
920.48
262954
285.67
Flooring with Vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC Roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand, water and tiles etc., complete for finished item of work. for F.F
839.02
734898
875.9
Providing skirting to internal walls to 15 cm height/ risers of steps with vitrified tiles length equal to flooring stones set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work. for F.F
47.55
41834
879.8
Painting to new walls with Two coats of plastic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making Three coats in all to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS911 for internal walls in F.F
2459.9
340844
138.56
Painting to new walls with Two coats of plastic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making Three coats in all to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS911 for external walls in F.F. (APSS No. 912)
1862.57
271097
145.55
Painting to new wood work with Two coats of ready mixed synthetic enamel paint first quality all shades to give an even shade over base coat of primer with luppam finishing thouroughly brushing the surface to remove all remains including cost and conveyance of all materials to site, all operational, incidental and labour charges etc., complete for finished item of work in F.F
102.06
15474
151.62
Plain Cement Concrete (1:2:4) prop. nominal mix size using 20mm hard broken graded granite metal including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete for finished item of work (APSSNo.402) in F.F
2.43
11691
4811.14
Supply and Fixing of Door with Double leaf shutter of size 1.20x2.10 mtrs with Sal wood /Country wood frame of section size 75x100mm with Flush Door shutter solid bond wood block board type with commercial fly on both faces of 35mm thick including cost of fixtures, sales and other taxes, cost and conveyance of all materials to site and all labour charges such as fixing door Frame and shutter, fixing in position with hardware fixtures etc., complete for finished item of work. in F.F
14
123556
8825.44
Providing and fixing of openable windows with Fly-mesh made of pre - painted steel (base steel as per IS 513 of 0.58mm thick, galvanized as per IS 277 with zinc of 150 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer and the section for outer frame of 72x55mm, center mullion should be of 48x50mm, centre mullion of 72x50mm, section for fixed glass beading section of 12x12mm and section for shutters of 48x25mm and outer frame & mullion sections with rebate for glazed shutters, fly mesh and a 20mm provision for guard bars/grills and fly mesh shutter section of 20x40mm and the sections cut to length metre joined with corner bracket, centre mullions fixed with mullion cap, stay, handles, latch 2 nos of heavy duty stainless steel pivot hinges per shutter and panelled with 5mm thick plain float glass and S.S.Mesh for fly mesh shutter (304 grade), fitted using rubber gaskets including fixing the windows in the concrete/masonry wall by means of self expanding screws including 10mm square guard bars with 6" (152.4mm)pitch, complete for finished item of work (centre fixed both side openable shutter window 5'0"x4'0" (1524mmx1219.2mm). Outer frame section size of 72x50mm. Shutter frame section size of 48x25mm. Mullion section size of 72x50mm. Fixed beading section size of 12x12mm) (BMT-P.24) in F.F
54
406457
7526.99
Supply, fitting and placing HYSD bar reinforcement as per Fe 415 grade as per IS 1786-1979 and mild steel bars (Fe 250 grade as per IS 432 ) in RCC work complete as per drawings and tecnical specification for bars below 36mm including over laps and wastages where they are not welded and tying with binding wire of 20 SWG, formining grills for reinforcement work cost and conveyance of binding wire,cover blocks and all incidental,operationl,labour charges such as cutting, bending, placing in position, tying etc., complete for finished item of work.in F.F
38000
2063780
54.31
Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for columns of F.F
34.35
343916
10012.11
Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Beams F.F
39.71
339015
8537.26
Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slab 125mm thick F.F
872.26
897643
1029.1
Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for Waist Slab 175mm thick F.F
36.9
48132
1304.4
Brick masonry in CM (1:8) with bricks of traditional size 23 x 11 x 7 cm 2nd class including cost and conveyance of all materials and all labour charges etc., complete for finished item of work for Superstructure.F.F
196.15
1168505
5957.2
Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for lintels F.F
13.61
120242
8834.84
Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for 75mm thick at fixed end & 50mm thick at free end with an average thickness of 62.5 mm etc., complete Sunshades F.F
83.64
67132
802.63
Providing Impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance of all materials all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., complete for finished item of work.
872.26
332165
380.81
Plastering 12mm thick in two coats with base coat of 8mm thick in CM(1:6) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer-in-charge etc., complete for finished item of work for internal surfacaes. (SS 901,903 & 904) (For Internal surfaces) for F.F
1734.13
604102
348.36
Plastering 20mm thick in two coats with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer-in-charge etc., complete for finished item of work for External surfacaes.(SS 901,903 & 904) for F.F
1257.85
452147
359.46
Ceiling plastering with CM (1:3), 12mm thick including cost and conveyance of all materials and all labour charges etc., complete.for F.F
920.48
262954
285.67
Flooring with Vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC Roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand, water and tiles etc., complete for finished item of work. for F.F
839.02
734898
875.9
Providing skirting to internal walls to 15 cm height/ risers of steps with vitrified tiles length equal to flooring stones set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work. for F.F
47.55
41834
879.8
Painting to new walls with Two coats of plastic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making Three coats in all to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS911 for internal walls in F.F
2459.9
340844
138.56
Painting to new walls with Two coats of plastic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making Three coats in all to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS911 for external walls in F.F. (APSS No. 912)
1862.57
271097
145.55
Painting to new wood work with Two coats of ready mixed synthetic enamel paint first quality all shades to give an even shade over base coat of primer with luppam finishing thouroughly brushing the surface to remove all remains including cost and conveyance of all materials to site, all operational, incidental and labour charges etc., complete for finished item of work in F.F
102.06
15474
151.62
Plain Cement Concrete (1:2:4) prop. nominal mix size using 20mm hard broken graded granite metal including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete for finished item of work (APSSNo.402) in F.F
2.43
11691
4811.14
Supply and Fixing of Door with Double leaf shutter of size 1.20x2.10 mtrs with Sal wood /Country wood frame of section size 75x100mm with Flush Door shutter solid bond wood block board type with commercial fly on both faces of 35mm thick including cost of fixtures, sales and other taxes, cost and conveyance of all materials to site and all labour charges such as fixing door Frame and shutter, fixing in position with hardware fixtures etc., complete for finished item of work. in F.F
14
123556
8825.44
Providing and fixing of openable windows with Fly-mesh made of pre - painted steel (base steel as per IS 513 of 0.58mm thick, galvanized as per IS 277 with zinc of 150 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer and the section for outer frame of 72x55mm, center mullion should be of 48x50mm, centre mullion of 72x50mm, section for fixed glass beading section of 12x12mm and section for shutters of 48x25mm and outer frame & mullion sections with rebate for glazed shutters, fly mesh and a 20mm provision for guard bars/grills and fly mesh shutter section of 20x40mm and the sections cut to length metre joined with corner bracket, centre mullions fixed with mullion cap, stay, handles, latch 2 nos of heavy duty stainless steel pivot hinges per shutter and panelled with 5mm thick plain float glass and S.S.Mesh for fly mesh shutter (304 grade), fitted using rubber gaskets including fixing the windows in the concrete/masonry wall by means of self expanding screws including 10mm square guard bars with 6" (152.4mm)pitch, complete for finished item of work (centre fixed both side openable shutter window 5'0"x4'0" (1524mmx1219.2mm). Outer frame section size of 72x50mm. Shutter frame section size of 48x25mm. Mullion section size of 72x50mm. Fixed beading section size of 12x12mm) (BMT-P.24) in F.F
54
406457
7526.99
Supply, fitting and placing HYSD bar reinforcement as per Fe 415 grade as per IS 1786-1979 and mild steel bars (Fe 250 grade as per IS 432 ) in RCC work complete as per drawings and tecnical specification for bars below 36mm including over laps and wastages where they are not welded and tying with binding wire of 20 SWG, formining grills for reinforcement work cost and conveyance of binding wire,cover blocks and all incidental,operationl,labour charges such as cutting, bending, placing in position, tying etc., complete for finished item of work.in F.F
38000
2063780
54.31
Supplying and laying, filling, jointing and testing SWG pipes 1st quality with air tight cement joints in CM (1:5:1) prop.including excavation of trenches and sockets pits in any soil (except rock requiring blasting) and refilling with watering and tamping of 101.60mm (4") dia SWG pipe upto 3' depth
60
25631
427.19
Supplying and laying, filling, jointing and testing SWG pipes 1st quality with air tight cement joints in CM (1:5:1) prop.including excavation of trenches and sockets pits in any soil (except rock requiring blasting) and refilling with watering and tamping of 152.40mm (6") dia SWG pipe upto 3' depth
30
18746
624.88
Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mmincluding plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification andincluding cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental andoperational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.
3
19418
6472.65
Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber upto 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg.
5
18394
3678.85
Supplying & fixing 76.2mm (3'')PVC/SWG Nahany traps 1st quality ISI marked conforming to IS:1729-1979 with C.P. Grating black painted for all floors including cost and conveyance of all materials to site , labour charges etc., complete for finished item of work
60
5863
97.71
Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware / Parryware / Neycer - ISI Mark: 580 mm x 440 mm
4
7998
1999.62
Supply & fixing white glazed european water closet with variety as approved by Engineer-in-charge, P" or S" trap with 4" CI outlet pipe of approved make,plastic seat and lid for EWC and rubber buffers as per ISI 2548 1963 with and 10 lits capacity PVC slimline low level flush tank of approved make with internal components and fixed with wooden gutties with required size nails,32mm dia short CP bend,12mm PVC Connections with brass union nuts and 12.70 mm (1/2") NP stop cock heavy duty (300 grams) complete including cost and conveyance of all materials to site,for finished item of work for all floors.
2
10209
5104.72
Providing & Fixing (559x406mm)22''x16'' size Indian make white gazed porcelain Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with 12.70mm double NP pillar cock (400)grams Ist quality 1 No. 32 mm dia C.P. waste couplings CI brackets 1No. 12.7mmNP stop cock (300 grams) 1No. 12.70mmPVC connection with brass union nuts, wooden blocks with drain pipe of 11/4'' dia pvc pipe of required length including cost and conveyance of all materials to site labour charges etc., complete for finished item of work.
2
4785
2392.73
Supplying and fixing of soap dish NP screws etc, complete including cost and conveyance of all materials labour charges complete for finished item of work in all floors.
8
1891
236.32
S & F concealed stop cock 12.7 mm (1/2") Indian Make 400 grams Seiko / Senior / Nice or equivalent
15
7925
528.31
S&F 12.7 mm N.P bib tap Indian make 400 grams Seiko / Senior / Nice or equivalent
30
11896
396.52
S & F CP Long body bib cock fancy type deluxe 400 grams 12.7 mm dia Indian make Seiko/ Senior/ Nice or equivalent
14
8701
621.47
Supplying and fixing GI Union 1st quality including cost and conveyance of all materials and labour charges etc, complete for GI union 19.05 mm Ist Quality
10
523
52.26
Supplying and fixing GI Union 1st quality including cost and conveyance of all materials and labour charges etc, complete for GI union 25.4 mm Ist Quality
10
795
79.53
Supplying and fixing GI Union 1st quality including cost and conveyance of all materials and labour charges etc, complete for GI union 38.15 mm Ist Quality
10
1170
117.02
S & F 25.4 mm copper ball cock ith PVC ball Indian make
ISI mark
5
2295
459
S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - 25 mm NB Size
5
5970
1194.09
S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - 20 mm NB Size
5
4164
832.8
S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - 40 mm NB Size
5
12242
2448.4
Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water for OD Pipe 15.9 mm dia
150
10397
69.31
Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water for 22.2mm dia OD Pipe
80
8453
105.66
Supply & fixing of PVC low level system parry ware, slim line with internal components & short bend: 10 Litres capacity Single Flush
8
11398
1424.73
Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks
5000
35000
7
Supply and fixing of ISI mark 25mm dia 1.55mm thick PVC conduit pipe Sudhakar / Macoplast / Modi make concealed in wall with all required acessories including No.14 SWG GI wire for earth continuity including chiseling the wall wherever necessary, including necessary masonery work for light/fan pointand seperate plug point with teak wood deep box including cost and conveyance of all materials to site and labour charges, sales tax etc., complete for finished item of work.
150
12699
84.66
Supply and fixing of 25mm dia 2.00mm thick P.V.C. pipe (ISI Mark) concealed in wall with all required accessories including masonary work and labour charges etc., complete, including over heads and contractors profit but excluding seigniorage charges and GST for finished item of work
150
10491
69.94
Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm tick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential buildings.
90
42950
477.22
Supply and fixing of 6A 5 pin wall plug socket with a 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. including over heads and contractors profit but excluding seigniorage charges and GST for finished item of work.
20
2462
123.1
Supply and fixing of 16A 3pin flush type switch socket combined (2 in 1) duly recessed in wall with wooden deep box of 6"x8"x21/2" size covered with hylam sheet including earth connections and all labour charges etc., complete. including over heads and contractors profit but excluding seigniorage charges and GST for finished item of work
10
3702
370.21
Supply and fixing 4 way TPN Distribution board with IP-43 protection of make Siemens / GE/ ABB/ GM /Standard/ Havells / HPL / Hager suitable for single phase 40A Double pole Isolator as incomer and 10KA-6-32A range single pole miniature circuit breakers four numbers (4Nos) as out going with internal connections including cost and conveyance of all materials to site, labour charges for surface / flush mounting etc., sales tax complete for finished item of work.
5
35212
7042.43
Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) F.R. P.V.C. insulated flexible copper cable in existing pipe for mains including all labour charges etc., complete.including over heads and contractors profit but excluding seigniorage charges and GST for finished item of work
400
29612
74.03
Supply and run of 2 of 56/0.3mm (4.0 sqmm) FRLS / HFFR PVC insulated ISI Copper cable of makes KEI / Polycab/ Havells /GM / Million/ HPL / Gold Medal / Power Flex/ RPG/ Anchor / Sun Cab / Fortune Art / Great white in existing metallic / non-metallic conduit pipe for mains including cost and conveyance of all materials to site, labour charges and sales tax etc., complete for finished item of work.
150
16869
112.46
Providing independent earthing by excavating a trench to a depth of 2.1m in all soils as per size specified in the data using 40mm dia Bclass GI pipe 2.5 Mtr length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc., complete
1
3899
3898.56
Supply and fixing of CFL Lamps 13/14W to batton/ pendant holder with all cost, convyance of material labour charges etc. complete.
20
1426
71.29
Supply of 1200mm (48") Sweep 230V, A.C 50 Hz Ceiling Fan with 3 blades and double ball bearings with all standard accseeories including over heads and contractors profit but excluding seigniorage charges and GST for finished item of work
15
34425
2295.02
Supply and fixing of 1x40W patty type tube light luminaire with copper choke, starter etc., including 1 No. 40W tube etc., complete, including over heads and contractors profit but excluding seigniorage charges and GST for finished item of work
42
12645
301.08
Supply and fixing of modular socket type Electronioc (humfree) regulator with cost and conveyance of all materials and labour charges etc complet with connection as per departmental approved.
15
3068
204.51
Earth work excavation for foundations of buildings in ordinary soils and depositing on bank with an intial lead of 10m and depth upto 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work including seigniorage excluding dewatering charges etc.
110
33437
303.97
Sand filling in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work.
4.95
3500
707.14
PCC (1:4:8) using 40mm nominal size SS5 gauge hard broken granite metal as per SS 108, machine mixed laid in position in layers not exceeding 15cm in thickness, including cost, seignorage charges and conveyance of all materials and water from approved sources to work site and all operational, incidental, labour charges such as mixing concrete, laying, tamping, curing, etc. complete for finished item of work as per SS 402 for foundations and flooring bed.
2.85
12418
4357.25
Vibrated Reinforced Cement Concrete M-20 Nominal Mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including steel centering using Casurina ballies, Bamboos, Wooden reepers, Runners, Wooden posts, Wall plates etc., as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) Bottam Slab , Side Walls & cover slabs for septic tank
19.95
145749
7305.69
Providing Impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance of all materials all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., complete for finished item of work.
74.87
28511
380.81
Brick masonry in CM (1:6) with bricks of traditional size 23 x 11 x 7 cm 2nd class including cost and conveyance of all materials and all labour charges etc., complete for finished item of work for Basement.
1.69
9779
5786.47
Supply, fitting and placing HYSD bar reinforcement as per Fe 415 grade as per IS 1786-1979 and mild steel bars (Fe 250 grade as per IS 432 ) in RCC work complete as per drawings and tecnical specification for bars below 36mm including over laps and wastages where they are not welded and tying with binding wire of 20 SWG, formining grills for reinforcement work cost and conveyance of binding wire,cover blocks and all incidental,operationl,labour charges such as cutting, bending, placing in position, tying etc., complete for finished item of work.
2300
124913
54.31
Plastering with CM (1:5), 12mm thick including cost and conveyance of all materials and all labour charges etc., complete for walls.
13.86
3571
257.63
Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber upto 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg.
4
14715
3678.85
Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mmincluding plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification andincluding cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental andoperational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.
2
12539
6269.3
Supply of SWG SP-1 Pipe Conforming to ISI 651-4" dia (101.6mm) (BMW-A-15)
35
5355
153
110 mm dia 3 M Single Socket PVC/SWR pipe - 4kg/sqm (BMW-G-16)
25
11900
476
110 mm dia- Single "Y" - UPVC/SWR pipe fittings (BMW-G-84)
2
290
145
Supply of SWG Bends conforming to IS standards - 100 mmdia BMW-A-39
2
154
77
110 mm dia - Single Tee with Door - UPVC/SWR pipe fittings BMW-G-78
8
1896
237
110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR pipe fittings BMW-G-57
5
350
70
110 mm dia - 45 Degree Bend - UPVC/SWR pipe fittings BMW-G-63
6
354
59
75 mm dia 3 M Single Socket PVC/SWR pipe - 4kg/sqm BMW-G-11
25
5400
216
75 mm dia- Single "Y" - UPVC/SWR pipe fittings BMW-G-79
2
126
63
75 mm dia - Single Tee with Door - UPVC/SWR pipe fittings BMW-G-70
6
372
62
75 mm dia - 87.5 Degree Bend - UPVC/SWR pipe fittings BMW-G-61
6
198
33
110 mm dia - 45 Vent Cowl - UPVC/SWR pipe fittings BMW-G-100
3
48
16
75 mm dia - 45 Vent Cowl - UPVC/SWR pipe fittings BMW-G-98
2
24
12
Supply and utilisation of 210 mm dia UPVC 10kg/sq.mmcasing pipe of class 3 ( 6 kg/cm2) for bore wells for potable water supply confirming to IS 4985/1988 as amended from time to time including revisions if any and confirming to technical conditions and specification.
6
8644
1440.67
Supply and utilisation of 180 mm dia UPVC casing pipe of class 3 ( 6 kg/cm2) for bore wells for potable water supply confirming to IS 4985/1988 as amended from time to time including revisions if any and confirming to technical conditions and specification.
65
46970
722.62
Supply and Transportation of 1.50HP 10 Stage single phase ISI submersible motor pumpset suitable for 4" Bore well.Makes: Kirloskar / Crompton / KSB / Texmo /Aryan Varsha. (ELEC-5.4.6, PAGE NO: 270)
1
18406
18405.65
Supply & Transportation of control panel for single phase submersible motors up to 3 HP @ 220V 50Hz operating range between 80 to 240V including supply and fixing of Direct-on-Line LTLK / SIEMENS / CROMPTON make Volt meter and Ammeter with starting and running capacitors assembled with ISI mark contactors and fitted with Legrand make ISI mark MCB etc., complete (ELEC-5.4.64, PAGE NO:276)
1
5113
5112.7
Supply of 3 Core 2.5 Sqmm Flat Copper cable as per IS694:1990 for Submersible Motors of makes Polycab / GoldMedal / Million / Payal / Havells / Nakoda. (ELEC-1.6.10, PAGE NO: 203)
130
11816
90.89
Manufacture, Supply, & Delivery of HDPE Pipe 32mm dia 12.5 Kg/Sq.cm conforming to IS 4984 - 1995 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.)
95
4533
47.72
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements