Andhra University Tender

Providing painting and minor woks to newly allotted first floor for the department of physical educa;Providing and fixing factory made poly vinyl chloride (PVC) Door Frame of the size 50x47mm with a wall thickness of 5mm, made out of extruded 10 mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of work. Providing and fixing30mm thick Solid panel PVC door shutter consisting of frame made out of M.S.tubes of 19 gauge thickness and size of 19mmx19mm for stiles,&15mmx15mm for top & bottom rails. M.S.frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ?C? channel of size 30 x 50mmforming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail &bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ?C? Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer?s specification & drawing for finished item of work.

Providing painting and minor woks to newly allotted first floor for the department of physical educa;Supplying and fixing in position M.S grills Gate at 35kg/m2 with tube angles etc including fabrication ,cost of welding rods, power charges and fixing in position by screws to the frames etc complete

Providing painting and minor woks to newly allotted first floor for the department of physical educa;Providing Enamel Painting Two coats for old wood work paint with best quality of paints to remove all dirt and remains of loose powdered materiel, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc?, complete for finished items of work

Providing painting and minor woks to newly allotted first floor for the department of physical educa;providing wall putty of white cement or polymer or cement based two coats for walls materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but including conveyance charges of materials etc complete as directed

Providing painting and minor woks to newly allotted first floor for the department of physical educa;Providing Enamel Painting two coats over base coat of primer paint with best quality of paints to iron works materiel, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc, complete for finished items of work. APSS No 1201,1202