Amaravati Development Corporation Limited Tender
... More
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Amaravati Development Corporation Limited - ADCL Tender
Civil And Construction
Road Construction
Drainage Work
Consultancy Services
Civil And Architectural Services
Agriculture or Forestry Works
Opening Date14 Feb 2025
Closing Soon3 Mar 2025
Tender Amount₹ 2,44,49,67,575
Costs
EMD
₹ 2,44,49,676Document Cost
Refer DocumentsTender Fee
₹ 20,000
Summary
Construction Of Balance Smart Trunk Infrastructure With Roads, Storm Water Drains, Water Supply Network, Sewerage Network, Utility Ducts For Power And Ict, Reuse Waterline, Pedestrian Tracks, Cycle Tracks, Avenue Plantation And Street Furniture Etc In N13 Road In
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
786091Tender No
325/ADCL/IPD/2024-25Tender Authority
Amaravati Development Corporation Limited ViewPurchaser Address
-Website
http://http://ccdmc.co.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Forming Subgrade with borrowed useful earth from outside road boundary by mechanical means up to SDR with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soil on the embankment, spreading soil, breaking clods, sectioning, grading and consolidation with 8 to 10 Tonnes Vibratory Road Roller @ OMC to meet requirement of table 300-1 & 300-2 of MoRT&H, including all hire and operational charges of T&P , etc., complete for finished item of work as per MoRT&H specification 305 (5th Revision) , satisfying the Free Swell Index value less than 50%, soaked CBR value not less than 8% and other reqirements from clause 305 (5th Revision) and as directed by the Engineer in Charge.
99967.46
1481
148069802.4
... More
Filling of Median / Island with excavated material deposited at site from roadway cutting and excavation for drain and foundation of other structures, spread, graded and compacted with Plate compactor as per drawing, Technical Specifications Clause 408 (5th Revision) with all leads and lifts complete for finished item of work and as directed by the Engineer in Charge
934.39
381
356432.41
... More
Filling of Median / Island with approved material obtained from selected borrow source as per drawing, Technical Specifications Clause 408 (5th Revision) with selected borrowed useful earth from outside road boundary by mechanical means up to SDR with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soil on the embankment, spreading soil, breaking clods, sectioning and compacting to meet requirements including all hire and operational charges of T&P, etc, complete for finished item of work and as directed by the Engineer in Charge
934.39
2069
1933682.73
... More
Construction of Granular sub-base by providing HBG material confirming to Grading - VI of MoRT&H Table 400-1 including cost and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavator / approved means at OMC and compacting with vibratory roller to achieve the desired density etc., complete for finished item of work as per MoRT&H Specification 401 (5th revision) and as directed by the Engineer-in-charge.
51303.88
2068
106136440.87
... More
Providing, Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem specification including cost of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in base courses on well prepared surface and compacting with Vibratory roller to acheive the desired density etc., as directed by the Engineer-in-Charge and as per MoRT&H specification 406 (5th revision) for finished item of work.
41415.85
2861
118503585.76
... More
Providing and applying prime coat with bitumen emulsion (SS-1) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.85 kg/sqm using mechanical means for finished item of work as per MoRT&H Specification 502 (5th Revision).
202553.4
77
15675607.63
... More
Providing and applying tack coat with bitumen Emulsion (RS-1) (Bulk) using Emulsion pressure distributor at the rate of 2.5 kg to 3.0 kg / 10 sqm over granular surface treated with primer cleaned with mechanical broom for finished item of work as per MoRT&H Specification 503 (5th revision) and as directed by the Engineer-in-Charge.
52700
16
871131
... More
Providing and applying tack coat with bitumen Emulsion (RS-1) (Bulk) using Emulsion pressure distributor at the rate of 2.0 to 3.0 kg /10 sqm over bituminous surface cleaned with mechanical broom for finished item of work as per MoRT&H Specification 503 (5th revision) and as directed by the Engineer-in-Charge.
274036.8
15
4198243.78
... More
Providing and laying of Dense Graded Bituminous Macadam with 100-120 TPH Batch type HMP Producing an average output of 75 tonne per hour using crushed aggregates of Grading - II as per table 500-10 of MoRT&H Specification 505 (5th revision) premixed with bitumen binder VG 40 grade @ 4.50% of weight of total mixture, transported to site, laid over a previously prepared surface with Hydrostatic paver finisher with sensor to the required grade, level and alignment and rolled with smooth wheeled, vibratory and tandem rollers as per Clauses 501.6 and 501.7 to achieve the desired compaction for finished item of work as directed by the Engineer-in-Charge including hire and operational charges all T&P and all other contingent charges necessary including cost of of all materials etc., complete as per MoRT&H specification No. 505 (5th revision)
15757.12
9854
155271133.19
... More
Providing Bituminous Concrete with 100-120 TPH Batch type hot mix plant producing an average output of 75 tonne per hour using HBG crushed aggregates of Grading-I as per table 500-17 of specification 507 of MoRT&H (5th Revision), premixed with bitumen binder VG-40 Grade @ 5.2 % of mix and filler, transporting the hot mix to work site, laying with Hydroststic paver finisher with sensor to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H Specification 507 (5th Revision) complete for finished item of work in all respects as directed by Engineer-in-Charge
6850.92
11009
75423079.95
... More
Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm Type-A aggregates using VG-30 grade bitumen @ 22 kg/10 sqm and colour pigment to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a Smooth wheeled roller 8-10 tonne capacity, and finishing to required level and grade as per MoRT&H Specification 508 (5th Revision) complete for finished item of work in all respects as directed by Engineer-in-Charge
52837.5
192
10170162
... More
Earthwork excavation in soils up to SDR by mechanical means (0 to 3m) for foundations of structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing sides of bottom, back filling the excavation earth to the extent required etc., complete including charges for finished item of work as per MoRT&H specification 304 (5th Revision) and as directed by the Engineer-in-Charge -For Bridges
81018
153
12454897.14
... More
Earthwork excavation in soils up to SDR by mechanical means (3 to 6m) for foundations of structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing sides of bottom, back filling the excavation earth to the extent required etc., complete including charges for finished item of work as per MoRT&H specification 304 (5th Revision) and as directed by the Engineer-in-Charge -For Bridges
19102
175
3356030.38
... More
Earthwork excavation in soils up to SDR by mechanical means (6m) for foundations of structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing sides of bottom, back filling the excavation earth to the extent required etc., complete including charges for finished item of work as per MoRT&H specification 304 (5th Revision) and as directed by the Engineer-in-Charge -For Bridges
12078
216
2618631.18
... More
Earthwork excavation in Ordinary rock by mechanical means (0-3m) for foundations of structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing sides of bottom, back filling the excavation earth to the extent required etc., complete including charges for finished item of work as per MoRT&H specification 304 (5th Revision) and as directed by the Engineer-in-Charge -For Bridges
17729
193
3424179.06
... More
Providing and constructing filter media behind bridge abutments, wing walls, retaining walls and return walls complete as per Drawings and Technical Specifications Clause 305 and 2504 (5th Revision).-For Bridges
151.85
2384
362051.4
... More
Providing and constructing Back Fill behind bridge abutments, wing walls, retaining walls and return walls with selected granular material of approved quality complete as per drawings and Technical Specifications Clause 304 and 305 (5th Revision).-For Bridges
387.85
1856
719927.17
... More
Vibrated cement concrete M 15 Grade Concrete using 40mm , 20mm and 10mm size HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost and conveyance of all materials to site and all labour charges ,centering, machine mixing, laying in position, Compacting , Vibrating and curing including all other incidental and all other operational charges of T&P required etc., complete as per MoRT&H Specification 1700, 2100 (5th Revision) for footings leveling course.minimum quantity of 275 kg cement to be used per cum of concrete.-For Bridges
280
6475
1813190.4
... More
Bored cast-in-situ piles of M-35 grade concrete, 1200mm dia, excluding reinforcement complete as per drawing, technical specification section 1100 (5th Revision) including all charges , removal of excavated earth with all leads and lifts and as directed by the Engineer in Charge.minimum quantity of 420 kg cement to be used per cum of concrete.-For Bridges
2668
14804
39499019.64
... More
Bored cast-in-situ piles of M-35 grade concrete, 750 mm dia, excluding reinforcement complete as per drawing, technical specification section 1100 (5th Revision) including all charges , removal of excavated earth with all leads and lifts and as directed by the Engineer in Charge.minimum quantity of 420 kg cement to be used per cum of concrete.-For Bridges
539
7470
4026739.64
... More
VRCC M35 grade controlled concrete (design mix) using 20mm maximum size (SS.5) HBG metal (graded) including cost and conveyance of all materials to site , all labour charges shuttering and machine mixing, laying, vibrating curing and finishing etc., complete including all other incidental and operational charges, hire charges of all T&P etc., complete but excluding cost of steel and its fabrication charges etc., and as per MORTH specification No.1100, 1500, 1600 &1700, (5th Revision) for pile caps.minimum quantity of 422 kg cement to be used per cum of concrete.-For Bridges
2867
6346
18195673.53
... More
Providing steel liner of 6 mm thick including fabricating and setting out as per detailed drawing confirming to MORTH specification 1100 (5th Revision) and as directed by the Engineer-in-charge.-For Bridges
285.3
118049
33679653.59
... More
Vibrated reinforced cement concrete M 30 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per MoRT&H specification 1500,1600,1700 & 2100 (5th revision ) and as directed by the Engineer-in-Charge for Foundation.minimum quantity of 407 kg cement to be used per cum of concrete.-For Bridges
708
6352
4497598.32
... More
Vibrated reinforced cement concrete M 35 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost and conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per MoRT&H specification 1500,1600,1700 & 2200 (5th revision ) and as directed by the Engineer-in-Charge for Substructure.minimum quantity of 422 kg cement to be used per cum of concrete.-For Bridges
1407
6847
9633883.77
... More
Vibrated reinforced cement concrete M 30 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost and conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per MoRT&H specification 1500,1600,1700 & 2200 (5th revision ) and as directed by the Engineer-in-Charge for Substructure.minimum quantity of 407 kg cement to be used per cum of concrete.-For Bridges
567
6748
3826507.23
... More
Vibrated reinforced cement concrete M 40 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost and conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per MoRT&H specification 1500,1600,1700 & 2200 (5th revision ) and as directed by the Engineer-in-Charge for Substructure.minimum quantity of 430 kg cement to be used per cum of concrete.-For Bridges
35
6899
241472.7
... More
Vibrated reinforced cement concrete / Prestressed Cement Concrete using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost and conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per MoRT&H specification 1500,1600,1700,1800 & 2300 (5th revision ) and as directed by the Engineer-in-Charge for Super structure.minimum quantity of 422 kg cement to be used per cum of concrete for RCC M35.-For Bridges
3007
7970
23967744.55
... More
Providing Constructing, Transporting and placing in position of precast Post Tensioned Concrete "I" girders using M45 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel & HT Strands and its fabrication & prestressing charges for finished item as per MoRT&H specification 1500,1600,1700,1800 & 2300 (5th revision) and as directed by the Engineer-in-Charge for Super structure as per drawing and technical specifications. Minimum quantity of 465kg cement to be used per cum of concrete.-For Bridges
3378
16173
54634589.7
... More
Providing & Constructing Cast in situ Post Tensioned Concrete "Box" girders using M40 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel & HT Strands and its fabrication & prestressing charges for finished item as per MoRT&H specification 1500,1600,1700,1800 & 2300 (5th revision) and as directed by the Engineer-in-Charge for Super structure as per drawing and technical specifications. Minimum quantity of 430 kg cement to be used per cum of concrete.-For Bridges
832
9297
7735761.28
... More
Providing & Constructing Cast in situ Post Tensioned Concrete "Box" girders using M45 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel & HT Strands and its fabrication & prestressing charges for finished item as per MoRT&H specification 1500,1600,1700,1800 & 2300 (5th revision) and as directed by the Engineer-in-Charge for Super structure as per drawing and technical specifications. Minimum quantity of 465 kg cement to be used per cum of concrete.-For Bridges
1644
9473
15574417.56
... More
Vibrated cement concrete M 15 Grade Concrete under approach slabs using 40mm , 20mm and 10mm size HBG/HBT crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position, Compacting , Vibrating and curing including all other incidental and all other operational charges of T&P required etc., complete as per MoRT&H Specification 1700, 2100 ,2700 (5th Revision) for leveling course.minimum quantity of 275 kg cement to be used per cum of concrete.-For Bridges
92
6475
595762.56
... More
Vibrated reinforced cement concrete M 30 grade for Approach slab using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost and conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work as per Approved drawing including cost of steel and its fabrication charges as per MoRT&H specification 1500, 1600,1700, & 2704 (5th Revision) and as directed by the Engineer-in-Charge. Minimum quantity of 407 kg cement to be used per cum of concrete.-For Bridges
182
11992
2182655.02
... More
Providing and laying (65mm thick) wearing course comprising of 40mm asphalt concrete over 25 mm thick mastic asphalt including cost of prime coat, prepared by using mastic cooker and laid to required level and slope after cleaning the surface, all complete as per Drawings, Technical Specifications clause 507, 516 & sub clause 2702 (5th Revision) and as directed by the Engineer in Charge-For Bridges
7996
1408
11259647.36
... More
Construction of Ornamental Railing complete as per approved drawings and as per MORTH Section 2200 & clause 2703 (5th Revision).-For Bridges
1766
4489
7928863.18
... More
Provision of Reinforced cement concrete crash barrier at the edges of the road, approaches to bridge structures and medians, constructed with M-40 grade concrete with HYSD bars of Fe-500 D grade reinforcement conforming to IRC:21 and dowel bars 25 mm dia, 450 mm long at expansion joints filled with pre-moulded asphalt filler board, keyed to the structure on which it is built and installed as per design given in the enclosure to MORTH circular No. RW/NH - 33022/1/94-DO III dated 24 June 1994 as per dimensions in the approved drawing and at locations directed by the Engineer, all as specified as per MORTH Section 800, 2200 & clause 2703 (5th Revision).minimum quantity of 430 kg cement to be used per cum of concrete.-For Bridges
1850
4284
7926547
... More
Providing and fixing Stripseal expansion joints complete as per Drawings, Technical Specifications Section 2600 (5th Revision) and as directed by the Engineer in Charge-For Bridges
415
6000
2490000
... More
Providing and fixing galvanized Drainage Spouts along with drain pipes complete as per drawing and Technical Specifications clause 2705 MORTH (5th Revision). -For Bridges
424
2383
1010578.56
... More
Providing and fixing bearings complete as per Drawings, Technical Specifications Section 2000 (5th Revision) and as directed by the Engineer in Charge-Tar Paper Bearings-For Bridges
51
80
4115.7
... More
Providing and fixing bearings complete as per Drawings, Technical Specifications Section 2000 (5th Revision) and as directed by the Engineer in Charge-Spherical Bearings-For Bridges
240
83893
20134392
... More
Providing, cutting, bending and fixing in position of HYSD bars of Fe-500 D grade reinforcement in reinforced concrete structures to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars complete as per drawing, Technical Specifications Section 1600 (5th Revision) including cost, conveyance of all materials to site and labour charges and as directed by the Engineer in Charge- bridge Foundation.-For Bridges
863.4
92265
79662049.97
... More
Providing, cutting, bending and fixing in position of HYSD bars of Fe-500 D grade reinforcement in reinforced concrete structures to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars complete as per drawing, Technical Specifications Section 1600 (5th Revision) including cost, conveyance of all materials to site and labour charges and as directed by the Engineer in Charge- bridge Sub structure.-For Bridges
226.5
92709
20998715.34
... More
Providing, cutting, bending and fixing in position of HYSD bars of Fe-500 D grade reinforcement in reinforced concrete structures to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars complete as per drawing, Technical Specifications Section 1600 (5th Revision) including cost, conveyance of all materials to site and labour charges and as directed by the Engineer in Charge- bridge Super structure.-For Bridges
946
95669
90503375.38
... More
High tensile steel wires/strands including all accessories for stressing, stressing operations and grouting all complete as per drawings, Technical Specifications Clause 1800 (5th Revision) and as directed by the Engineer in Charge-For Bridges
292.4
142075
41542803.1
... More
Providing Weep holes in VRCC bridge Abutment/ Wing wall/return wall with 100mm Diameter PVC pipe extending through the full width of the structure at 1.00m C/C in both horizontal and vertical direction so that the weep holes in each horizontal direction is staggered from the weep holes laying above and below lines as shown in drawing including cost and conveyance of the PVC pipes and labour charges for cutting to required length, placing the pipe with a slope of about 1V : 20H towards stream side face etc., complete for finished item of work for weep holes as per MoRT&H specification 2706 & 2200 (5th Revision)-For Bridges
253.08
275
69680.52
... More
Providing and painting with Synthetic enamel paints of approved quality on bridges with Bridge No. and Span arrangements as per IRC-7,1971 complete as per drawing, Technical Specifications Section and as directed by the Engineer in Charge.-For Bridges
12
40
484.32
... More
Providing and Applying ordinary paints of approved quality on surface of parapets as per Drawings, Technical specification clause 803 (5th Revision) and as directed by the Engineer in Charge.-For Bridges
3711
152
567152.13
... More
Providing and painting of flood gauge on sub-structure to full height and 500 mm width as per the drawings, Technical specification clause 803 (5th Revision) and as directed by the Engineer in Charge.-For Bridges
54
202
10917.18
... More
Providing, laying and fixing of HDPE pipe of 160mm dia complete as per Drawing, Technical Specifications and as directed by the Engineer in Charge.-For Bridges
1850
656
1214654.5
... More
Earthwork excavation by mechanical means up to SDR for retaining wall foundations of structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing sides of bottom, back filling the excavation earth to the extent required etc., complete including charges for finished item of work as per MoRT&H specification 304 (5th Revision) and as directed by the Engineer-in-Charge -For Retaining wall
12698
133
1689595.88
... More
Vibrated cement concrete M 15 Grade Concrete as levelling coarse using 40mm , 20mm and 10mm size HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, and conveyance of all materials to site and all labour charges ,centering, machine mixing, laying in position, Compacting , Vibrating and curing including all other incidental and all other operational charges of T&P required etc., complete as per MoRT&H Specification 1700, 2100 (5th Revision) for footings leveling course.Minimum quantity of 275 kg cement to be used per cum of concrete.-For Retaining wall
886
5606
4967429.88
... More
Vibrated reinforced cement concrete M 30 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per MoRT&H specification 1500,1600,1700 & 2100 (5th revision ) and as directed by the Engineer-in-Charge for retainingwall Foundation.minimum quantity of 407 kg cement to be used per cum of concrete.-For Retaining wall
3017
5456
16460872.68
... More
Vibrated reinforced cement concrete M 30 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per MoRT&H specification 1500,1600,1700 & 2200 (5th revision ) and as directed by the Engineer-in-Charge for Retainingwall Substructure. Minimum quantity of 407 kg cement to be used per cum of concrete.-For Retaining wall
3267
5795
18935172.63
... More
Providing, cutting, bending and fixing in position of HYSD bars of Fe-500 D grade reinforcement in reinforced concrete structures to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars complete as per drawing, Technical Specifications Section 1600 (5th Revision)including cost, conveyance of all materials to site and labour charges and as directed by the Engineer in Charge -For Retaining wall
628.39
79446
49923260.46
... More
Back filling behind retaining wall with gravel including cost, conveyance and of all materials to site etc., complete as per Clause 710.1.4 of IRC : 78 and as per MoRT&H clause 305 & Section 2200 (5th Revision) and as per Drawing and technical specifications for finished item of work-For Retaining wall
937
1617
1515213.33
... More
Providing and laying of Filter media of Stone aggregate behind abutment, wing wall, retaining wall and return walls, complete as per drawing, Technical Specifications Clause 305 & 2504 (5th Revision) and as directed by the Engineer in Charge-For Retaining wall
2496
2073
5176454.4
... More
Providing Weep holes in VRCC Abutment/ Wing wall/return wall with 100mm Diameter PVC pipe extending through the full width of the structure at 1.00m C/C in both horizontal and vertical direction so that the weep holes in each horizontal direction is staggered from the weep holes laying above and below lines as shown in drawing including cost and conveyance of the PVC pipes and labour charges for cutting to required length, placing the pipe with a slope of about 1V : 20H towards stream side face etc., complete for finished item of work for weep holes as per MoRT&H specification 2706 & 2200 (5th Revision)-For Retaining wall
3680
236
871681.6
... More
Provision of Reinforced cement concrete crash barrier at the edges of the road, approaches to bridge structures and medians, constructed with M-40 grade concrete with HYSD bars of Fe-500 D grade reinforcement conforming to IRC:21 and dowel bars 25 mm dia, 450 mm long at expansion joints filled with pre-moulded asphalt filler board, keyed to the structure on which it is built and installed as per design given in the enclosure to MORTH circular No. RW/NH - 33022/1/94-DO III dated 24 June 1994 as per dimensions in the approved drawing and at locations directed by the Engineer, all as specified as per MORTH Section 800, 2200 & clause 2703 (5th Revision).minimum quantity of 430 kg cement to be used per cum of concrete.-For Retaining wall
1200
3681
4417608
... More
Providing and Fixing 20mm thick Compressible Fiber board joint filler complete as per drawing, Technical Specifications Section 2604 (5th Revision) and as directed by the Engineer in Charge-For Retaining wall
244
189
46247.76
... More
Providing and constructing inlet chambers of 0.6mx0.6mx0.6m dimensions with RCC M25 grade of concrete for Raft and walls and M15 grade of concrete for Levelling Course, with galvanised gratings and PVC/HDPE pipe 150mm dia as per drawing and Technical Specifications Section 1500, 1600 & 1700 (5th Revision) and as directed by the Engineer in Charge.
1134
11482
13021018.92
... More
Providing and Laying Plain Cement Concrete M 20 kerb with top and bottom width 115 and 165mm respectively, 390mm high over WMM kerb stone laid with kerb laying machine as per drawing including cost, conveyance of all materials to site and labour charges etc complete as per Technical Specifications Clauses 409 and Section 1700 (5th Revision) and as directed by the Engineer in Charge.minimum quantity of 344 kg cement to be used per cum of concrete. -Grade M 20 for Kerb "A" Type Section over WMM
52871.58
285
15073687.46
... More
Providing and Laying Plain Cement Concrete M 20 kerb with top and bottom width 115 and 465mm respectively, 365mm over WMM kerb stone laid with kerb laying machine as per drawing including cost, conveyance of all materials to site and labour charges etc complete as per Technical Specifications Clauses 409 and Section 1700 (5th Revision) and as directed by the Engineer in Charge.minimum quantity of 344 kg cement to be used per cum of concrete. -Grade M 20 for Kerb "L" Type Section over WMM
17000
467
7942910
... More
Providing and Laying kerb painting with with two coats on the surface with synthetic enamel paint grade-I (IS:164) in all shades on new plastered concrete surfaces after back filling including cost, conveyance of all materials to site and labour charges etc complete as per drawing, Technical Specifications Clause 803 (5th Revision) and as directed by the Engineer in Charge
29753.13
131
3907776.09
... More
Construction of footpath/separator by providing 60mm paver blocks-M35 grade, 30mm sand fill below it including cost, conveyance of all materials to site and labour charges etc complete as per the technical specification of MoRTH& APDSS as per drawings and as directed by the Engineer -in- Charge
51000
753
38425440
... More
Supplying of hot applied thermoplastic road marking compound, 2.50mm thick including reflectorising glass beads @ 250gms with Reflectorising Glass beads on Bituminous surface at 250gms per Sqm area, thickness of 2.50mm is exclusive of surface applied glass bead as per MoRTH section 803.40 & IRC 35 -2015 , the material should be satisfy MoRTH specifications 803.40 and must comply with the following a) White index for the product should be in the range of 60-70 when measured against standard reference. The applied panel 7/8 number must be submitted for checking up the white index in the department lab .In case the department approves the white index box of any vendor, the department engineer may carryout random checking of the appplied products at site against the approved panel. In case of any major deviation, beyond acceptance limit, department reserve the right to cancel or reject the total supplied consignment of the said material and will compell the vendor has to replace the full consignment by the desired material as per approved panel at his own cost and additional demurrages may be claimed due to loss of man days (as per the rules of the department), b)The Luminance factor of the material should be in the range of 80-85% at 45 degrees centigrade as per AASTHOM 249. c) Crack resistance: The applied panel cured for 7 days under ambient condition and then should be tested as per BS3262 part-1, 1989 and should pass at the range of 0 degree centigrade to '-10 ' degree centigrade. D) Adhesion : Strong E) Softening point 102 degree centigrade F) Dried film finish : Smooth and uniform G) Night Vision: High as directed by the Engineer-in-Charge and confirming to IS 164-1961 (1st revision reaffirmed in 1986) and clause conforming to IRC 35-2015 & MoRTH section 803.4-Lane / Center line / Edge marking / Transverse marking and any other marking
8952.25
560
5013260
... More
Supplying of hot applied thermoplastic road marking compound, 2.50mm thick including reflectorising glass beads @ 250gms with Reflectorising Glass beads on Bituminous surface at 250gms per Sqm area, thickness of 2.50mm is exclusive of surface applied glass bead as per MoRTH section 803.40 & IRC 35 -2015 , the material should be satisfy MoRTH specifications 803.40 and must comply with the following a) White index for the product should be in the range of 60-70 when measured against standard reference. The applied panel 7/8 number must be submitted for checking up the white index in the department lab .In case the department approves the white index box of any vendor, the department engineer may carryout random checking of the appplied products at site against the approved panel. In case of any major deviation, beyond acceptance limit, department reserve the right to cancel or reject the total supplied consignment of the said material and will compell the vendor has to replace the full consignment by the desired material as per approved panel at his own cost and additional demurrages may be claimed due to loss of man days (as per the rules of the department), b)The Luminance factor of the material should be in the range of 80-85% at 45 degrees centigrade as per AASTHOM 249. c) Crack resistance: The applied panel cured for 7 days under ambient condition and then should be tested as per BS3262 part-1, 1989 and should pass at the range of 0 degree centigrade to '-10 ' degree centigrade. D) Adhesion : Strong E) Softening point 102 degree centigrade F) Dried film finish : Smooth and uniform G) Night Vision: High as directed by the Engineer-in-Charge and confirming to IS 164-1961 (1st revision reaffirmed in 1986) and clause conforming to IRC 35-2015 & MoRTH section 803.4-Directional Arrows, Lettering etc. as per drawing No.61 of MORTH Type Designs for Intersections
1
560
560
... More
Supplying of hot applied thermoplastic road marking compound, 2.50mm thick including reflectorising glass beads @ 250gms with Reflectorising Glass beads on Bituminous surface at 250gms per Sqm area, thickness of 2.50mm is exclusive of surface applied glass bead as per MoRTH section 803.40 & IRC 35 -2015 , the material should be satisfy MoRTH specifications 803.40 and must comply with the following a) White index for the product should be in the range of 60-70 when measured against standard reference. The applied panel 7/8 number must be submitted for checking up the white index in the department lab .In case the department approves the white index box of any vendor, the department engineer may carryout random checking of the appplied products at site against the approved panel. In case of any major deviation, beyond acceptance limit, department reserve the right to cancel or reject the total supplied consignment of the said material and will compell the vendor has to replace the full consignment by the desired material as per approved panel at his own cost and additional demurrages may be claimed due to loss of man days (as per the rules of the department), b)The Luminance factor of the material should be in the range of 80-85% at 45 degrees centigrade as per AASTHOM 249. c) Crack resistance: The applied panel cured for 7 days under ambient condition and then should be tested as per BS3262 part-1, 1989 and should pass at the range of 0 degree centigrade to '-10 ' degree centigrade. D) Adhesion : Strong E) Softening point 102 degree centigrade F) Dried film finish : Smooth and uniform G) Night Vision: High as directed by the Engineer-in-Charge and confirming to IS 164-1961 (1st revision reaffirmed in 1986) and clause conforming to IRC 35-2015 & MoRTH section 803.4-Pedestrian Crossing at junctions and median openings
1365
560
764400
... More
Providing and fixing Village name board size 600x800 mm made out of Type – XI of ASTMD 4956-09 wide angle cube cornered micro Prismatic Retro reflective sheeting and confirming to IRC 67:2012 for full background of Green Colour & White Letters and fixed over 3MM Alluminium Composite Material sheet having minimum 0.30mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the ground level to the bottom of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials ,equipment, machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by Engineer –in-Charge.
5
8236
41180
... More
Providing & fixing junction boards of size 1500 x 1200 mm made out of Type – XI of ASTMD 4956-09 wide angle cube cornered micro Prismatic Retro reflective sheeting and confirming to IRC 67:2012 for full background of Green Colour & White Letters and fixed over 4MM Alluminium Composite Material sheet having minimum 0.5 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the ground level to the bottom of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials ,equipment, machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by Engineer -in-Charge.
70
29525
2066750
... More
Providing and fixing of Route marker signs (450mm x 600mm) as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing
140
2578
360963.4
... More
Providing and fixing Cautionary / Warning sign boards size 900 mm equilateral triangle made out of Type – XI of ASTMD 4956-09 wide angle cube cornered micro Prismatic Retro reflective sheeting and confirming to IRC 67:2012 for full background of White colour and letters/logos done by screen printing in Black colour, boarders by screen printing in Red colour and fixed over 4MM Aluminium Composite Material sheet having minimum 0.5 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the ground level to the bottom of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials ,equipment, machinery and labour with all leads and lift, loading chages necessary for satisfactory completion of the work as directed by Engineer -in-Charge.
5
6958
34790
... More
Providing and fixing Mandatory / Regulatory sign boards size 900 mm circle made out of Type – XI of ASTMD 4956-09 wide angle cube cornered micro Prismatic Retro reflective sheeting and confirming to IRC 67:2012 for full background of White colour and letters/logos done by screen printing in Black colour, boarders by screen printing in Red colour and fixed over 4MM Aluminium Composite Material sheet having minimum 0.5 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all roundand fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the ground levelto the bottom of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The Signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials ,equipment, machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by Engineer -in-Charge.
5
10231
51155
... More
Stop sign - Octagon of size 1200 mm complete including cost and conveyance of all materials ,equipment, machinery and labour with all leads and lift, loading chages necessary for satisfactory completion of the work as per drawings, Technical Specifications Clause No. 801 (5th Revision) and as directed by the Engineer in Charge
66
3018
199248.06
... More
Providing and fixing Mandatory (Give way sign) sign boards size 900 mm equilateral triangle made out of Type – XI of ASTMD 4956-09 wide angle cube cornered micro Prismatic Retro reflective sheeting and confirming to IRC 67:2012 for full background of White colour and letters/logos done by screen printing in Black colour, boarders by screen printing in Red colour and fixed over 4MM Aluminium Composite Material sheet having minimum 0.5 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the ground level to the bottom of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials ,equipment, machinery and labour with all leads and lift, loading chages necessary for satisfactory completion of the work as directed by Engineer -in-Charge.
66
6958
459228
... More
Supplying and installation of delineators (Roadway indicators) not less than 800mm high above ground level. The delineator shall have a core and shell construction which shall be made of tough, high impact resistant, injection-molded, thermoplastic outer body. The inner core shall consist of powder coated or painted Mild steel of minimum thickness 1.0mm. The delineator should have top retro-reflective unit consisting of white color micro prismatic non metallic retro-reflective sheeting of minimum exposed area of 125 cm2 and bottom retro-reflective unit consisting of red color micro prismatic non metallic retro-reflective sheeting of minimum exposed area of 35 cm2 confirming to ASTM D4956 type XI standards and as per IRC -79. The delineators shall be fixed to the ground by inserting the root of the delineator up to the marked portion and by firm concrete filling as per the instructions by engineer in-charge.
30
2048
61440
... More
Supply and installation of Hazard Markers/Delenators using M.S angle of size 55x55x6 mm and 120 cm high above ground level painted with two coats of black & white strips of 15cm wide with first quality synthetic enamel paint over one coat of appropriate primer of approved brand, colour, with 30cm x 90cm Type- XI of ASTMD 4956-09 wide angle cube concerned micro prismatic Retro Reflective sheeting of Yellow yellow colour and confirming to IRC 67:2012 fixed over 3mm aluminum composite material having minimum 0.30mm thick Aluminium skin on both sides with standard supports consisting of alternately black and yellow strips, in screen printing slopoing downward at an angle of 45 degrees towards the side of the obstruction on which the traffic is to pass and buried into the ground in a trench of size 30cm x 30cm and 50cm depth filled with CC M-20 including cost and conveyhance of all materials, equipment,machinery and labour with all leads and lifts, loading and unloading charges necessaryu for successful completion of the work on any road in division as directed by the Engineer-in-charge and conforming to IRC 67-2012 & MoRT&H specification No 805 and approved drawings etc., complete for finished item of work.
12
4438
53256
... More
Providing and fixing Object markers 48.3mmdia. MS pipe ,keep at 50cm above ground level with 3MM Alluminium Composite Material sheet having minimum 0.30 mm thick Aluminium skin fully covered with type XI of wide angle cube cornered micro Prismatic Retro reflective sheeting and confirming to IRC 67:2012 reflective sheeting fixed in to trench of 30x30x30cm filled with CC M20 conforming to IRC-67:2012 & MORTH&H specification no 805 and approved drawing etc.,
70
1021
71470
... More
Providing and fixing of Moulded Shanks Raised Pavement Markers made of Polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lense face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 TypeH and complying to specifications of Category A of MORTH circular No.RW/NH-33023/10/97 - DO III dt. 11-o6-1997. The height, width and length shall not exceed 50mm, 100mm and with minimum reflecting area of 13 sqcm on each side and the slope to the base shall be 35 +/- 5 degrees The strength of detachment of the integrated cylindrical shanks (of diameter not less than 19 +/- 2mm and height not less than 30 +/- 2mm) from the body is to be a minimum values of 700kgs. Fixing will be by drilling holes on the road for the twin shanks to go inside without nails and using epoxy resign based adhesive as per manufacturers recommendation and complete as directed bythe Engineer.
10634
336
3573024
... More
Clearing the light Jungle like Shrub, bushes, grass, wild vegetation and it including all operational, incidental, labour charges, required tools, overheads & contractors profit complete for finished item of work
52360
3
166504.8
... More
Aliliment and fixing planting point with 0.45 mtr length sticks incl mateal cost, transport and overheads and contractor propit complte for finised work
7980
1
14523.6
... More
Earth work excavation for foundations Digging of pits for plant in ordinary soils 0.90x0.90x0.90 mtr. Tall Plants
7980
155
1236900
... More
Filling with Red soil (Red soil in this context it is defined as sandy
As per loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable;·fertile, slightly acidic·:or neutral)in pits/trenches and including cost and conveyance of red s /1' to work
site and it including all operational, incidental ,labour charges, required tools, overheads & contractors profit complete for finished item of work.
60% of the pit size for Central median Plantation (0.342 cub/pit) excluding ball of earth
7980
427
3411450
... More
Cost and Conveyance of Farm Yard Manure or dry cow dung powder including loading, unloading, internal transport and application. of the FYM into the pits/trenches and it including all operational, incidental,labour charges, required tools, overheads & contractors propit complete for finished item of work. (0.028 cum mtr farm yard Manure for each. pit'.) Rs.1761 for cubic mtr. Tall Plants
7980
49
391498.8
... More
Conveyance charges for internal transprot upto 100 mt with head load and application of the red soil and FYM into the pit and it including all operational, incidental ,labour charges, required tools, overheads & contractors profit complete for finished item of work. (0.37 cubic per pit and Rs. 48.31 per pit
7980
48
385513.8
... More
Transport of 21''x21'' size bag plants from Nursery to Plantation site including loading and unloading 10 km lead
7980
31
250252.8
... More
Internal transportation of larger bag size 21''x21'' for 100 no. of plants
7980
16
133266
... More
Planting of bag plants 21''x21'' size @ 5145.61/100 no.
7980
51
410650.8
... More
Hedge / shrub planting: Digging the trench of size 0.15 mtrs. depth, refilling with red garden soil including cost of red garden soil and farmyard manure at 4:1 ratio, internal transportation of plants, planting etc., including the application of fertilizers and pesticides etc., (@ 20 gms/pit/sqmt) and it including all operational, incidental, labour charges, required tools, overheads & contractors profit complete for finished item of work, but excluding the cost of the fertilizers (@ 20 gms/pit/sqmt) and plant material etc., - unit 1 Sqmt of work. (* 6 No./Sqm of plants & bag size shall be arrived based on the spacing 0.40 c/c as per the design.)
(Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable, fertile, slightly acidic or neutral)
49980
329
16457914.2
... More
Provision for Transportation of 21" x 21" bag size (30 kg/bag) 7978 Nos
239.34
1000
239340
... More
Provision for Transportation of 7" x 8" bag size (2 kg/bag) 299880 Nos
599.76
1000
599760
... More
Cost of Mimusops elengi (21"x21")/Equivalent
1190
390
464100
... More
Cost of Lagerstromia tree (21"x21") /Equivalent
1190
340
404600
... More
Cost of Bauhinia blackeana tree (21"x21")/Equivalent
933
430
401190
... More
Cost of Ficus religiosa tree (21"x21") /Equivalent
933
375
349875
... More
Cost of Spathodea campanulata (21"x21")/Equivalent
933
375
349875
... More
Cost of Azadirachta indica tree (21"x21") /Equivalent
933
400
373200
... More
Cost of Tabebuia rosea tree (21"x21")/Equivalent
933
350
326550
... More
Cost of Swietenia mahagoni tree (21"x21") /Equivalent
933
380
354540
... More
Cost of Jatropha (7"x8") /Equivalent
299880
35
10495800
... More
Maintenance of Palms/Tree planting: Trimming (once in month) and application of fertilizers, insecticides, Fungicides @ 20 gms/pit/sqmt) (once in quarterly) by manually excluding cost of fertilizers, it including all operational, incidental ,labour charges, for complete of work.
31920
6
220248
... More
Maintenance of hedge/shrub planting: Trimming of hedges/shrubs (once in 30 days) and application of fertilizers, insecticides, Fungicides (once in a month @ 20 gms/pit/sqmt) etc., by manually excluding cost of fertilizers it including all operational, incidental, labour charges, for complete of work.
199920
6
1273490.4
... More
Hire charges of tractor mounted water tanker for filling sump by 5000 ltrscapacity tanker(150 waterings for oneyear ie. once in a three days @ 5litres per sqm/plantper each time)and it including·all operational, incidental,labourcharges,requiredtools,overheads&contractors profit complete for finished item of work
9051
691
6255960.69
... More
watch and ward 8 member per month for 12 months = 96 member
96
15000
1440000
... More
Supply and delivery of 19:19:19 fertilizer 4 times each time 20 gms / Sqm (Once in 3 months i.e 4 times in a Year ( 7980 Nos x 4 x 20 gms)/1000/50 = 13 Bags &
(Once in 3 months i.e 4 times in a Year ( 52360 Sqm x 4 x 20 gms)/1000/50 = 84 Bags
97
1800
174600
... More
Foundation and erection charges with special T&P, for 10Mtrs long Octagonal / Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.60Mtr x 0.60Mtrs x 1.40 Mtr size M20 cc work vibrated concreting mixing with necessary steel (15kgs) reinforcement and curing for 7 days as directed by the field engineers during execution including excavation of Earth/BT all labour charges and cost and conveyance of materials etc., complete.
568
8908
5060056.4
... More
Foundation and erection charges with special T&P, for 4 Mtrs long pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.45Mtr x 0.45Mtrs x1.20 Mtr size M20 cc work vibrated concreting mixing with necessary steel (10kgs) reinforcement and curing for 7 days as directed by the field engineers during execution including excavation of Earth/BT all labour charges and cost
and conveyance of materials etc., complete.
1134
6613
7499743.02
... More
Erection charges for Octagonal pole upto 10 mtrs on bridge crashbarrier portion with 4 Nos, 8" Anchor bolts with chemical treatment with suitable "I" type bolts etc duly drilling holes to crash barrier and fixing of "L" type base plate of dimensions 300mmx300mmx12mm at top, side and as stiffner with 4 number of holes at top face and bottom face including bolts, nuts and washers and cost and conveyance of all material and all labour charges etc., complete as directed by the department officers.
26
8482
220545
... More
Fabrication, Transportation and supply of hot-dip galvanized Octagonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with hinged door opening arrangement, including the supply of suitable boards with bakelite sheet as per IS specification suitable to withstand the wind speed of 180 KMPH for 10 Mtrs height Pole having dimensions Bottom 175 mm,. Top 70mm with 3mm thick, base plate 275 x 275 x16mm and 4 Nos of M24 x 750 long 'J' bolts along with template including Fabrication, Transportation and supply of 1.5 Mtr length single arm suitable size decorative galvanized bracket with PU paint colour finish etc complete. (The design should be approved from field Engineers) for finished item of work as directed by Engineer in charge. Make for Pole :Bajaj /Valmont /Laasma/ Transrail/Utkarsh/Skipper/Consoul /Surya/Vakrangee/Lysaght Pole
568
31412
17842175.04
... More
Supply, Transporation, installation, testing and commissioning of LED decorative post top of 45W with a system lumen output of 4950 lumens and a minimum system efficiancy of 110lm/W with street light optics. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. the luminaire should have a color temperature of 5700K and CRI70. The luminare shall meet IP66 with THD10% and PF0.9, IK08 protection. The luminaire shall hav eclosed diffused optics with polycarbonate diffuser board. the total power consumption should not exceed 45W (including driver) with glass reinforced polymer (GRP) composite type Conical pole of height 4 mtr including decorative base plate and internal junction box including labour charges etc., complete and as directed by the departmental authorities. Makes:Klite/Phillips/Reytek/lightman or equivalent. Design, model shall be as approved by the departmental authorities
1134
39600
44906400
... More
Supply, transportation and fixing of LED Street light Luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass/polycarbonate diffuser, supply input voltage 120 - 270V AC, P.F 0.90, high power LEDs having System Efficacy = 120 lumens/watt and junction temperature 70°C, with Ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec-3), driver surge protection 4KV, in-house additional Surge protection 10 KV with optics distribution, THD10% at 110 Volts AC, driver efficiency 90%, CCT: 3000K - 5700K, minimum CRI70, etc., complete with earth connection and not less than two years warranty. a) Luminaire Make : Wipro(Skyline) / Philips (Greenline Extra) / GE- Venture / Crompton(Nexus / Hawk series) / Bajaj (Edge) / Halonix (Modular/ Lumos-Super) / Havells (Endura Series)/Greenlites(HI-Lux) /Capart(Premium)/Polycab/Keselec / HPL(City Vision)/Jaquar (Premium) /Eveready /Surya (Pollux) / Fortune Arrt (Leaf) / Rhino(GPSL06) b) LED MAKE :PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG. - 180W LED Fixture
594
13931
8275417.92
... More
Supply, transportation and fixing of LED Street light Luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass/polycarbonate diffuser, supply input voltage 120 - 270V AC, P.F 0.90, high power LEDs having System Efficacy = 120 lumens/watt and junction temperature 70°C, with Ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec-3), driver surge protection 4KV, in-house additional Surge protection 10 KV with optics distribution, THD10% at 110 Volts AC, driver efficiency 90%, CCT: 3000K - 5700K, minimum CRI70, etc., complete with earth connection and not less than two years warranty. a) Luminaire Make : Wipro(Skyline) / Philips (Greenline Extra) / GE- Venture / Crompton(Nexus / Hawk series) / Bajaj (Edge) / Halonix (Modular/ Lumos-Super) / Havells (Endura Series)/Greenlites(HI-Lux) /Capart(Premium)/Polycab/Keselec / HPL(City Vision)/Jaquar (Premium) /Eveready /Surya (Pollux) / Fortune Arrt (Leaf) / Rhino(GPSL06) b) LED MAKE :PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG.- 72W LED Fixture
26
5772
150097.74
... More
Supply and fixing of 6-32A 10KA SP MCB, C/D Curve ISI in Octagonal pole with Din channel, with or without insulator terminal strip connector including cost & conveyance of all materials and labour charges etc., complete Makes: Legrand-DX3 / Schneider-A9/Hager-h3/ Siemens-5SX4/ Havells STADx /L&T-AU/Indo Asian-Opti pro/ HPL (Techno)/Anchor (Uno plus).
1754
339
594851.56
... More
Design, Fabrication, assembling, packaging, forwarding to site, installation, testing & commissioning of Outdor type panel with stand enclsoure consisting of 3Ph, , 415V, 50Hz, 3 nos of 200A fuse units, 9 no of 100A fuse units, RYB Indicators for incoming and outgoing phases Al. bus bar, floor mounting free standing totally enclosed compartmentalized front operational, vertical, dust and vermin proof, FRB Shrouding. LT panels fabricated with 2 mm thick for load bearing members, side sheet, removable top & bottom sheets, equipment mounting plate, front door & covers, partition and 3mm HRCA for undrilled gasket removable gland plate and base frame is ISMC -75.The panel shall be painted with texture finish electro static paint SIEMENS GREY RAL -7032 (powder coating).
9
39118
352067.4
... More
Supply installation, testing and commisision of 21Kva Three Phase Smart Streetlight CCMS Web Controller –Wireless Street light monitoring and controlling system with 63A MCB for incoming and 9 Nos of 20Amps SP MCB with 2 outputs with 1 no of buffer SP MCB of 3 Nos, includes inbuilt RF gateway. It uses GSM/GPRS/4G technology to receive commands and send data from and to the web software with 4G with 2G fall back, Micro HDMI port to be provided. MIPI CSI Camera port to be provided. Minimum of Two USB 3.0 ports to be provided. In-built GPS to be provided It should support GPS/GLONASS/BD, Switching Components, Automatic MCB Trip Rectification for nuisance MCB trips, Controller should have SPD of 20kV/10kA for the Panel. Metering: ISI Energy Meter with Class 1.0 accuracy and Complaint to IS:13779. Ability to communicate securely via cellular networks (GSM / GPRS /2G /3G /4G). Ability to send data regarding energy usage, ON/OFF status etc. from controller. Ability to remotely upgrade the CCMS device firmware from central server. Design Life should be More than 10 years. Inbuild Battery backed with RTC based timer for Bypass operation for up to 8 Hours. Enclosure: CRCA Metal Enclosure with IP65 and IK10 with size of 700x500x145mm CRCA 1.2 thickness with Single Door RAL 7035 Powder coating. Test report: Controller should be type- tested with NABL lab and the test report need to be submitted.Communication Charges per panel per annum included for the warranty period of 2 years,including CCMS Software charges, and Supply of Stand for 3 Phase panel, 6.2 feet height, MS powder coated with 5mm Thick and approved byengineer in charge
18.78
46300
869514
... More
Supply and laying of 3 core 2.5 Sqmm ISI marked, PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990..Makes: Finolex / RR kabel / Havells/ Finecab /KEI/Polycab/ Gloster/ Goldmedal/GM// Fortune Arrt/Anchor /Million
13420
171
2301932.6
... More
Supply transportation and laying of 16 Sqmm 4 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / Finecab / KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt
20156
259
5223427.4
... More
Supply transportation and laying of 10 Sqmm 4 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / Finecab / KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt
21536
225
4847107.52
... More
Supply transportation and laying of 35 Sqmm 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / Finecab / KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt
1878
377
708588.18
... More
Supply transportation and laying of 50 Sqmm 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / Finecab / KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt
180
489
88162.2
... More
Supply and Transportation and laying of Outer dia 63 mm and Inner dia 51mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Makes:DURA LINE (Dura Guard) or its equivalent make and as directed by the Engineer in Charge
43570
174
7623442.9
... More
Earth work excavation of Trench of size in all types of soils for covering of UG cables/HDPE pipe and refilling of Trench.
7842.6
395
3100807.19
... More
Providing independent earthing by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.
28
4763
133387.52
... More
Supply and making end termination with heavy Alluminium lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc of up to 16 sqmm.Makes:Dowels/Jainson/Comet.
14032
13
191256.16
... More
Supply and making end termination with heavy Alluminium lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc of 35 sqmmMakes:Dowels/Jainson/Comet
222
27
6053.94
... More
Supply and making end termination with heavy Alluminium lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc of 50 sqmmMakes:Dowels/Jainson/Comet
72
35
2535.84
... More
Supply and laying of 8 SWG GI wire(0.104Kgs/1Mtr) Earth wire/Strip in horizontal run in Ground including,revitting,soldering,saddles,making connection etc as required
43570
11
494955.2
... More
Supply and laying of 25mm x 6mm GI Flat (1.18Kgs/1Mtr) Earth Strip in horizontal run in Ground including, revitting,soldering,saddles,making connection etc as required
55.56
110
6123.27
... More
Earthwork excavation by mechanical means for foundations of structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing sides of bottom, back filling the excavation earth to the extent required etc., complete including charges for finished item of work as per MoRT&H specification 304 (5th Revision) and as directed by the Engineer-in-Charge 0-3m depth
85797.08
133
11477075.39
... More
Earthwork excavation by mechanical means for foundations of structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing sides of bottom, back filling the excavation earth to the extent required etc., complete including charges for finished item of work as per MoRT&H specification 304 (5th Revision) and as directed by the Engineer-in-Charge 3-6m depth including dewatering
13468.93
160
2155702.25
... More
Vibrated cement concrete M 15 Grade Concrete as levelling coarse using 40mm , 20mm and 10mm size HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed and compacted by vibration including curing for 14 days including cost, and conveyance of all materials to site and all labour charges ,centering, machine mixing, laying in position, Compacting , Vibrating and curing including all other incidental and all other operational charges of T&P required etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MoRTH .Minimum quantity of 275 kg cement to be used per cum of concrete.
3411.09
5198
17733063.03
... More
Vibrated reinforced cement concrete M 30 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution and excluding cost of steel and its fabrication charges for finished item per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH and as directed by the Engineer-in-Charge.i) Drain Raft concrete M-30 grade including form work. Minimum quantity of 407 kg cement to be used per cum of concrete.
7618.01
5481
41761473.74
... More
Vibrated reinforced cement concrete M 30 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution and excluding cost of steel and its fabrication charges for finished item per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH and as directed by the Engineer-in-Charge.ii) Drain Side Walls concrete M-30 grade excluding formwork. Minimum quantity of 407 kg cement to be used per cum of concrete.
10985.35
5298
58200933.57
... More
Vibrated reinforced cement concrete M 30 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution and excluding cost of steel and its fabrication charges for finished item per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH and as directed by the Engineer-in-Charge.iii) Drain Slab concrete M-30 grade including formwork. Minimum quantity of 407 kg cement to be used per cum of concrete.
6703.99
5823
39040417.61
... More
Form work for Drain side walls including cost & conveyance of all materials to site and labour charges, other incidental hire and operational charges of all T&P etc., complete as per approved drawings etc., complete and as directed by Engineer-in-charge
84009.97
568
47724383.76
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., complete and as directed by the Engineer in Charge.
1209.85
91446
110635979.4
... More
Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications
12497.25
235
2948351.22
... More
Supply Laying of a geotextile 200 gsm between pitching and embankment slopes on which pitching is laid to prevent escape of the embankment material through the voids of the stone pitching/cement concrete blocks as well as to allow free movement of water without creating any uplift head on the pitching as per Tech Specifications in Section 700 & 2504 MORTH.
1524.48
189
288416.37
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) and as per latest revisions and specifications and as directed by the Engineer - in - charge.
33880.55
358
12161423.42
... More
Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery of manhole covers and frames of H.D.-20 with 500mm dia. Clear opening with ISI marking anywhere in A.P., F.O.R. destination including, loading, unloading & stacking etc., as applicable.
773
2259
1746902.7
... More
Supply & Fixing of 20mm thick Compressible Fiber board joint filler in expansion joint complete as per drawing, Technical Specifications Section 2604 (5th Revision) and as directed by the Engineer in Charge
167.85
696
116900.81
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete
89084.81
115
10256334.18
... More
Manufacture as per company’s standard specification supply and delivery of encapsulated plastic steps for man holes anywhere in A.P. including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc, complete
6931
188
1307186.6
... More
Providing and laying boulder apron for bed protection with stone boulders of minimum size and weight as per Table 1300.1, no fragment weighing less than 25 / 40 kg laid dry complete as per drawing and technical specifications Clause 1301 MORD / 2503 MORTH
217.91
2139
466185.76
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH - a) 0.0 m To 3.0 m Depth
940.93
133
125868.21
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
870.08
358
312315.22
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete and as directed by Engineer-in-charge
690.98
115
79552.53
... More
Vibrated reinforced cement concrete M 20 grade with batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed and compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MoRTH (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 347 kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authority - For Pipe Encasement
56.84
5020
285374.31
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) /(Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., complete and as directed by the Engineer in Charge.
2.27
91446
207582.49
... More
Supply & delivery of Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) (ex-works) etc., complete and as directed by Engineer-in-charge - For DI pipe crossings (500mm)
157
154
24181.14
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc complete and as directed by Engineer-in-charge. - 300mm dia DI-K7 pipes
2
4542
9084.26
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc complete and as directed by Engineer-in-charge. - 400mm dia DI-K7 pipes
683
6906
4717392.21
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc complete and as directed by Engineer-in-charge. - 500mm dia DI-K7 pipes
65
9851
640318.9
... More
Supply & Delivery of Centrifugal Cast (spun) Ductile Iron fittings conforming to IS: 9523/2000 having dimensions as per BIS, with zinc coating externally and inside mortar lining (with finishing as per clause 13/IS9523/2000) including transportation to site of work , lowering carefully into trench and laying them true to alignment and gradient ((Reference to specifications. BIS No.3114/94) etc complete Upto 500mm Dia
808
154
124448.16
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc complete and as directed by Engineer-in-charge - 300mm dia DI pipes
2
275
550.62
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc complete and as directed by Engineer-in-charge - 400mm dia DI pipes
683
421
287836.69
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc complete and as directed by Engineer-in-charge - 500mm dia DI pipes
65
594
38629.5
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc complete and as directed by Engineer-in-charge - 300mm dia DI pipes
1
303
303.2
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc complete and as directed by Engineer-in-charge - 400mm dia DI pipes
124
388
48162.84
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc complete and as directed by Engineer-in-charge - 500mm dia DI pipes
12
483
5802.6
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete - 300mm dia DI pipes
1
238
238.59
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete - 400mm dia DI pipes
124
334
41419.72
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete - 500mm dia DI pipes
12
543
6516.96
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete - 0º to 11.25º Bend - 400mm dia
6
334
2004.18
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete - 11.25º to 45º Bend - 400mm dia
8
334
2672.24
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete - 45º to 90º Bend - 400mm dia
6
334
2004.18
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm hard granite machine crushed metal mechanically mixed , compacted by vibration including curing for 14 days including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawings and technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MORTH and directed by the departmental officers - For PCC Bedding of Pipe Encasing, Valve Chambers & Thrustblocks
9.79
5034
49289.13
... More
Vibrated reinforced cement concrete M 25 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 403 kgs)Note : The rate shall be adjusted as per the approved design mix by the competent authority - For Thrustblocks
111.86
5477
612732.17
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) /(Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., complete and as directed by the Engineer in Charge. - For Valve Chambers & Thrustblocks
1.59
91446
145399.19
... More
Manufacturing, Supply, Delivery of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO 10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985 /8329-2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specialsand. - 400mm dia
11
9006
99068.86
... More
Manufacturing, Supply, Delivery of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO 10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985 /8329-2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specialsand. - 500mm dia
11
12610
138711.43
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) - 400mm dia
11
421
4635.73
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) - 500mm dia
11
594
6537.3
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) - 400mm dia
2
388
776.82
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) - 500mm dia
2
483
967.1
... More
Manufacture, Supplying and fitting Ductile Iron Double Chambered Restrained Joint fittings confirming to IS 9523 : 2000 (restrained joints are designed and tested as per ISO 10804) of Class K-12 (Alternative and to avoid concrete thrust blocks along with minimum length of Restrained joint DI pipes at bends) including rubber gasket confirming to IS 5382 : 1985 and locking bars & rubber gaskets etc complete - Ductile Iron Double Chambered Restrained Joint fittings - Fittings upto 500mm dia
500
366
183490
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 1 Km, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHa) 0.0 m To 3.0 m Depth
7757.85
133
1037767.59
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
8484.11
358
3045371.28
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete including Taxes
5818.39
115
669871.24
... More
Vibrated reinforced cement concrete M 20 grade with batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed and compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MoRTH (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 347 kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authority. For Pipe Encasement
50.77
5020
254898.91
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., complete and as directed by the Engineer in Charge.
2.03
91446
185635.44
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc complete and as directed by Engineer-in-charge. - 100mm dia DI-K7 pipes
1773
1377
2441598.3
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc complete and as directed by Engineer-in-charge. - 150mm dia DI-K7 pipes
1045
2000
2090930.05
... More
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m,5.0m,5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation etc complete and as directed by Engineer-in-charge. - 600mm dia DI-K7 pipes
1088
13240
14406131.84
... More
Supply & Delivery of Centrifugal Cast (spun) Ductile Iron fittings conforming to IS: 9523/2000 having dimensions as per BIS, with zinc coating externally and inside mortar lining (with finishing as per clause 13/IS9523/2000) including transportation to site of work , lowering carefully into trench and laying them true to alignment and gradient ((Reference to specifications. BIS No.3114/94) etc complete UPTO 500mm dia
273.5
154
42124.47
... More
Supply & Delivery of Centrifugal Cast (spun) Ductile Iron fittings conforming to IS: 9523/2000 having dimensions as per BIS, with zinc coating externally and inside mortar lining (with finishing as per clause 13/IS9523/2000) including transportation to site of work , lowering carefully into trench and laying them true to alignment and gradient ((Reference to specifications. BIS No.3114/94) etc complete Above 500mm dia
2289.5
169
388802.89
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc complete and as directed by Engineer-in-charge - 100mm dia DI pipes
1773
66
117957.69
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc complete and as directed by Engineer-in-charge - 150mm dia DI pipes
1045
108
113246.65
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) etc complete and as directed by Engineer-in-charge - 600mm dia DI pipes
1088
793
863306.24
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc complete and as directed by Engineer-in-charge - 100mm dia DI pipes
322
179
57847.3
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc complete and as directed by Engineer-in-charge - 150mm dia DI pipes
190
217
41351.6
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) etc complete and as directed by Engineer-in-charge - 600mm dia DI pipes
198
559
110786.94
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete - 100mm dia DI pipes
322
79
25608.66
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete - 150mm dia DI pipes
190
115
22019.1
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete - 600mm dia DI pipes
198
686
135873.54
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete - 0º to 11.25º Bend-100mm dia DI pipes
8
79
636.24
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete - 0º to 11.25º Bend-150mm dia DI pipes
8
115
927.12
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete - 0º to 11.25º Bend-600mm dia DI pipes
8
686
5489.84
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete - 11.25º to 45º Bend-100mm dia DI pipes
5
79
397.65
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete - 11.25º to 45º Bend-150mm dia DI pipes
3
115
347.67
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete - 11.25º to 45º Bend-600mm dia DI pipes
10
686
6862.3
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete - 45º to 90º Bend-100mm dia DI pipes
6
79
477.18
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete - 45º to 90º Bend-150mm dia DI pipes
6
115
695.34
... More
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber confirming to BIS:5382/85, supply and delivery of Rubber Gaskets suitable for CI, DI, S/S pipes any where in A.P. for destination departmental stores including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking etc.,complete - 45º to 90º Bend-600mm dia DI pipes
6
686
4117.38
... More
Manufacture, supply, & delivery of HDPE pipes grade PE 100 (10 kg/sqcm) conforming to IS 4984 - 1995 including transportation to any where in A.P. - OD 63mm dia HDPE pipes
9913
190
1892094.31
... More
Manufacture, supply, & delivery of HDPE pipes grade PE 100 (10 kg/sqcm) conforming to IS 4984 - 1995 including transportation to any where in A.P. - OD 75mm dia HDPE pipes
1718
269
462605.86
... More
Laying and jointing of HDPE pipes by butt fusion welding as per IS:7634-Part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure. - 63mm dia HDPE pipes
9913
26
262793.63
... More
Laying and jointing of HDPE pipes by butt fusion welding as per IS:7634-Part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure. - 75mm dia HDPE pipes
1718
27
47949.38
... More
Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to anywhere in AP. - HDPE Tees - 63mm
330
214
70860.9
... More
Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to anywhere in AP. - HDPE Tees - 75mm
57
261
14894.67
... More
Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to anywhere in AP. - M.S flange - 63mm
36
118
4253.76
... More
Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to anywhere in AP. - M.S flange - 75mm
4
190
763.48
... More
Service connection using 1 No.of Composite Clamp Saddle for tapping from DI distribution mains shall be of wrap around design, wide skirt and wide straps support, which shall reinforce the pipe while providing excellent stability to the saddle. Non corrosive plastic body moulded with stainless steel threaded metal insert for tapping outlet and underneath projection to self interlock with DI/HDPE main pipe. Threading size and dimensions shall conform to IS: 554. The body shall have retaining cavity housing for internal and external retention of the elastomeric seal. Straps shall be made Engineering plastic SS 304, NC Rolled thread, tightening torque for 1/2" (M12) nut bolt 14-15Kg.m and for 5/8"(M16) nut bolt 21-23Kg.m (DI Main Pipe Sizes from 100mm to 250mm with Outlet Sizes of 1/2", 3/4",1" Outlets),1 No. of Regulating Brass Ferrule.(1/2",3/4",1"),2 No. of compression adaptor with one side compression end to suit ½” /3/4”/1” (20mm/25mm/32mm OD )PE80 Blue pipe and other side with female threaded off-take with SS-304 material inserts of sizes ½” /3/4”/1” BSP threads, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin) and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16.Double Compression elbow to suit 20mm/25mm/32mm OD PE80 Blue pipe, Body, Nut and cap of polypropylene, clip ring of POM (Acetylic resin) and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16. PE80 Blue pipe of 4 meter length as per ISO4427 Rev1. for conveyance of potable water. the pressure rating 1/2" (20mm OD) will be PN16. Certificate for compliance of testing these fittings and pipe as per BS-6920 by designated Laboratories to be produced. inclusive of Transportation, installation cost, civil works such as earthwork excavation, refilling etc complete as directed by Engineer-incharge
94
1900
178600
... More
Supply, delivery, laying and jointing of MDPE Blue Pipe 40mm as per ISO 4427 Rev 1. For conveyance of potable water .The pressure rating of 40mm will be 4kg/cm. Certificate for compliance of testing these fittings and pipe as per BS-6920 by designated laboratories to be produced etc., complete and as directed by Engineer-in-charge
388.63
95
36919.85
... More
Manufacture, supply, delivery, Laying & Jointing of 16mm PE flexible pipes including transportation etc., complete and as directed by Engineer-in-charge
43344
8
372758.4
... More
Manufacture, supply, delivery, Laying of 16mm Start Connector/takeoff including transportation etc., complete and as directed by Engineer-in-charge
965
-
675.5
... More
Manufacture, supply, delivery, Laying of 16mm End Cap including transportation etc., complete and as directed by Engineer-in-charge
965
-
675.5
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm hard granite machine crushed metal mechanically mixed , compacted by vibration including curing for 14 days including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawings and technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MORTH and directed by the departmental officers - PCC for Thrust blocks & Valve Chambers
17.42
5034
87703.43
... More
Vibrated reinforced cement concrete M 25 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 403 kgs)Note : The rate shall be adjusted as per the approved design mix by the competent authority - For Thrust Block
20.25
5477
110922.82
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) /(Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete and as directed by the Engineer in Charge. - For Thrust Block & Valve Chambers
0.14
91446
12802.44
... More
Laying and Providing End caps for DI & MS crossing pipes using Socket Flanges and Blank Flange joints.Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) (ex-works) Excluding Transportation etc., complete and as directed by Engineer-in-charge - For DI pipe crossings Upto 500mm)
52
154
8009.04
... More
Manufacturing, Supply, Delivery of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985 /8329-2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specials. - 100mm dia
11
1967
21645.91
... More
Manufacturing, Supply, Delivery of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985 /8329-2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specials - 150mm dia
11
2733
30069.38
... More
Manufacturing, Supply, Delivery of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985 /8329-2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specials - 600mm dia
11
16582
182403.21
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) - 100mm dia
11
66
731.83
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) - 150mm dia
11
108
1192.07
... More
Lowering CI, DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries from source of supply (Ref to specifications. BIS No: 3114/1994) - 600mm dia
11
793
8728.28
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) - 100mm dia
2
179
359.3
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) - 150mm dia
2
217
435.28
... More
Jointing CI, DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete. (Reference to specifications. BIS No.3114/1994/12288/1997.) - 600mm dia
2
559
1119.06
... More
Manufacture, Supplying and fitting Ductile Iron Double Chambered Restrained Joint fittings confirming to IS 9523 : 2000 (restrained joints are designed and tested as per ISO 10804) of Class K-12 (Alternative and to avoid concrete thrust blocks along with minimum length of Restrained joint DI pipes at bends) including rubber gasket confirming to IS 5382 : 1985 and locking bars & rubber gaskets etc complete - Ductile Iron Double Chambered Restrained Joint fittings - Fittings upto 500mm dia
500
366
183490
... More
Manufacture, Supplying and fitting Ductile Iron Double Chambered Restrained Joint fittings confirming to IS 9523 : 2000 (restrained joints are designed and tested as per ISO 10804) of Class K-12 (Alternative and to avoid concrete thrust blocks along with minimum length of Restrained joint DI pipes at bends) including rubber gasket confirming to IS 5382 : 1985 and locking bars & rubber gaskets etc complete - Ductile Iron Double Chambered Restrained Joint fittings - Fittings above 500mm dia
100
415
41583
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH - a) 0.0 m To 3.0 m Depth
23606.39
133
3157826.79
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH - b) 3.0 m To 6.0 m Depth including dewatering
3108.96
160
497589.05
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH - c) 6.0m Depth including dewatering
602.65
197
119131.85
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
3597.47
358
1291311.86
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm hard granite machine crushed metal mechanically mixed , compacted by vibration including curing for 14 days including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawings and technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MORTH and directed by the departmental officers - PCC bedding for Power Conduit crossings
155.11
5034
780923.01
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete and as directed by Engineer-in-charge
3752.58
115
432034.54
... More
Supply of the HDPE Electrical pipe conduits with permanent Lubricant inner layer with ribs , dimensional ratio of 13.5, deflection not greater than 5% when exposed to the normal operating temperature 90 degrees centigrade under the overburden soil pressure and other physical properties confirming to ASTMF 2160 and / or NEMA TC 7 ( The expected service life of HDPE Pipe conduit and accessories shall not be less than 50 years) including transportation - 225mm HDPE
22716
3297
74897150.76
... More
Lowering Laying and jointing of 225mm HDPE electrical pipe conduits with silicore lubricant inner layer having ribs with coupler and as per drawing in ready made trenches true to alignment and gradient and maintain specified spacing with spacers (excluding cost of spacer ) including all materials labour charges and all other incidential charges etc complete for finished item of work as per drawing and as directed by the Engineer-in-Charge. - 225mm dia HDPE pipes
22716
133
3040082.28
... More
Manufacture, Supply and Delivery of RCC NP4 Socket and Spigot pipes conforming to B.I.S. 458/2003 (rate per meter of effective length) inclusive of Transportation. - 1600mm dia RCC NP4 pipe
91
23187
2110057.95
... More
Lowering the RCC pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985 - 1600mm dia RCC NP4 pipe
91
1715
156117.78
... More
Providing Spacers of Acrylonitrile Butadiene Styrene (ABS) material make with 10mm thk for HDPE Pipe conduits including placing, positioning at 2.0 mtr interval as directed by engineer-in-charge.Spacers For 225mm dia Power Conduit
11358
210
2385180
... More
Supply and Laying of Warning tape in excavated trenches in two layer ,one Yellow colour tape at 100 mm and 250mm Below FRL and Red colour tape at 400 mm and as directed by engineer-in-charge - 225mm width
6110.86
29
177214.94
... More
Supply & Placing of chequered Cement concrete heavy duty tiles confirming to IS 1380 using aggregate cement pigments of of 25 mm thick(any shade-300 x300 mm) set over base coat of cement mortar 1:6 12 mm thick over cc bed already laid or RCC roof slab,including near cemnt slurry of honeylike consistency spread at the rate 3.3 kgs/sqm and jointed with need cement to full depth mixed with pigment of matching shade including cost of all materials like cement,sand,water and tiles etc ,complete finished item of work.
2551.93
1071
2734699.23
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH - 0.0 m To 3.0 m Depth For manholes
850.11
133
113719.21
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH - 3.0 m To 6.0 m Depth including dewatering For manholes
750.6
160
120133.53
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm hard granite machine crushed metal mechanically mixed , compacted by vibration including curing for 14 days including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawings and technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MORTH and directed by the departmental officers For manholes
25.3
5034
127376.39
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authority - For manholes a) Raft
58.44
5481
320364.57
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authority -For manholes c) Walls-200mm thick
9.13
10978
100236.44
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authority - For manholes d) Walls-250mm thick
156.63
9842
1541654.27
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authority -For manholes f) Slab
50.43
5823
293677.09
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
81.47
358
29243.66
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) /(Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., complete and as directed by the Engineer in Charge.
45.31
91446
4143419.62
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete and as directed by Engineer-in-charge
1600.71
115
184289.74
... More
Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery and Fixing of Heavy Duty manhole covers and frames - 24x24 HD 20 with ISI marking anywhere in A.P., F.O.R. destination including, loading, unloading & stacking at site etc., complete
23
2147
49388.36
... More
Manufacture as per company’s standard specification supply and delivery of encapsulated plastic steps for man holes anywhere in A.P. including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc, complete
372
188
70159.2
... More
Manufacture, supply,delivery and fixing of GI Electrode of 40mm Dia and transportation anywhere in Andhra Pradesh,
24
540
12969.84
... More
Providing and Supply of FRP Gratings of 38x38mm mesh with 7/5mm rib of 38mm thick including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc, complete
2.88
2447
7047.36
... More
Providing and Fixing of ISA 50x50x6mm for for man holes anywhere in A.P. including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work and one coat of primer etc, complete as per drawing and as instructed by the departmental Engineers
86.4
107
9325.15
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH - 0.0 m To 3.0 m Depth
8637.08
133
1155382.19
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
5394.79
358
1936459.87
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm hard granite machine crushed metal mechanically mixed , compacted by vibration including curing for 14 days including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawings and technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MORTH and directed by the departmental officers - For PCC Bedding
205.82
5034
1036229.6
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete and as directed by Engineer-in-charge
5600.61
115
644798.23
... More
Manufacture, Supply and Delivery of RCC NP4 Socket and Spigot pipes conforming to B.I.S. 458/2003 (rate per meter of effective length) inclusive of Transportation. - 600mm dia RCC NP4 pipe
458
4776
2187760.66
... More
Lowering the RCC pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985 - 600mm dia RCC NP4 pipe
458
456
209182.34
... More
Supply and Transportation for DWC pipe double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part - II. Makes: DURA LINE (Dura Guard)/Precision/CPE or any ISI approved make having ISI mark. as directed by the Engineer-in-charge. - 160mm DWC pipe
33540
529
17757753
... More
Lowering and laying by pushon joint of DWC pipe double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II including cost of labour, material and other incidental charges etc. complete as directed by the engineer-in-charge. - 160mm DWC pipe
33540
21
708364.8
... More
Providing of 7 way ( Multi duct for ICT) with permanent Lubricant inner layer with ribs , dimensional ratio of 13.5, deflection not greater than 5% when exposed to the normal operating temperature 90 degrees centigrade under the overburden soil pressure and other physical properties confirming to ASTMF 2160 and / or NEMA TC 7 ( The expected service life of HDPE Pipe conduit and accessories shall not be less than 50 years) including transportation
50538
1085
54834740.76
... More
Laying and Jointing of 7 Way 40mm Multi Duct in ready made trenches true to alignment and gradient with push fit coupler including all sundries but excluding cost & conveyance of pipes from source of supply and jointing materials etc, complete and as directed by Engineer-in-charge
50538
40
2053864.32
... More
Providing Spacers of Acrylonitrile Butadiene Styrene (ABS) material make with 10mm thk for HDPE Pipe conduits including placing, positioning at 1.5 mtr interval as directed by engineer-in-charge. - Spacers for ICT : DWC- 4 & 7 Way-6
5565
1860
10350900
... More
Providing Spacers of Acrylonitrile Butadiene Styrene (ABS) material make with 10mm thk for HDPE Pipe conduits including placing, positioning at 1.5 mtr interval as directed by engineer-in-charge. - Spacers for ICT : DWC- 2 & 7 Way-6
51
1440
73440
... More
Supply and Laying of Warning tape in excavated trenches in two layer ,one Yellow colour tape at 100 mm and 250mm Below FRL and Red colour tape at 400 mm and as directed by engineer-in-charge - 225mm width
16846
29
488534
... More
Supply & Placing of chequered Cement concrete heavy duty tiles confirming to IS 1380 using aggregate cement pigments of of 25 mm thick(any shade-300 x300 mm) set over base coat of cement mortar 1:6 12 mm thick over cc bed already laid or RCC roof slab,including near cemnt slurry of honeylike consistency spread at the rate 3.3 kgs/sqm and jointed with need cement to full depth mixed with pigment of matching shade including cost of all materials like cement,sand,water and tiles etc ,complete finished item of work.
7073.42
1071
7580018.34
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 1 Km, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTHa) 0.0 m To 3.0 m Depth
4228.74
133
565678.55
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authority.a) Raft
221.11
5481
1212111.75
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authority.b) Walls-250mm thick
454.96
9842
4478012.04
... More
Vibrated reinforced cement concrete M 30 grade from batching plant using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 407kgs cum)Note : The rate shall be adjusted as per the approved design mix by the competent authority.b) Slab
216.37
5823
1260022.04
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
275.61
358
98930.21
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., complete and as directed by the Engineer in Charge.
24.27
91446
2219395.15
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete
4163.25
115
479314.97
... More
Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery and Fixing of Heavy Duty manhole covers and frames - 24x24 HD 20 with ISI marking anywhere in A.P., F.O.R. destination including, loading, unloading & stacking at site etc., complete
114
2147
244794.48
... More
Manufacture as per company’s standard specification supply and delivery of encapsulated plastic steps for man holes anywhere in A.P. including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc, complete but excluding all taxes.
528
188
99580.8
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH - Upto 3m
11201.4
133
1498411.28
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
2800.35
358
1005185.63
... More
Supply delivery and laying of Smooth Wall 40mm outer dia and 33mm inner dia Permanently Lubricated HDPE Telecom Duct with Silicore inner layer and 4mm PP Rope in 500mts Coil format confirming to TEC GR.No.TEC/GR/TX/CDS-008-03, March-2011 with Amdt. No.1, dt:25/28.03.2013 etc., complete and as directed by Engineer-in-charge - 40mm dia
142240
55
7823200
... More
Manufacture, Supply and Delivery of RCC NP4 Socket and Spigot pipes conforming to B.I.S. 458/2003 (rate per meter of effective length) inclusive of Transportation. - 300mm dia RCC NP4 pipe
5184
1881
9751104
... More
Lowering the RCC pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985 complete and as directed by Engineer-in-charge - 300mm dia RCC NP4 pipe
5184
262
1359970.56
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm guage hard granite machine crushed metal including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete for levelling course as directed by the departmental officers
2.19
5034
11025.86
... More
Vibrated reinforced cement concrete M 25 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) mechanically mixed , compacted by vibration including curing for 14 days including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per technical specifications clause 802,803,804, 805,806,807, 1202 , 1203, 1204 , 1205.4 & 1205.5 MORD and 1500 , 1600 , 1700 & 2100 MORTH MoRT&H specification 1500, 1700, 2100, 2200 & 2300 (5th revision ) and as directed by the Engineer-in-Charge (with minimum cement quantity of 403 kgs)Note : The rate shall be adjusted as per the approved design mix by the competent authority
7.29
5477
39932.21
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) /(Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete and as directed by the Engineer in Charge.
0.44
91446
40236.25
... More
Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery and Fixing of Heavy Duty manhole covers 24x24 HD-20 and frames with ISI marking anywhere in A.P., F.O.R. destination including, loading, unloading & stacking at site.
72
2147
154607.04
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH - 0.0 m To 3.0 m Depth
90.24
133
12071.4
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH - 3.0 m To 6.0 m Depth including dewatering
32.28
160
5166.41
... More
Providing & laying Sand bedding in foundations & filling in trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.
138.8
358
49822.26
... More
Plain Cement Concrete PCC M10 ( 1:3:6 ) using 40mm hard granite machine crushed metal mechanically mixed , compacted by vibration including curing for 14 days including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as per drawings and technical specifications clause 802,803 ,1202 & 1203 MORD and 1500 , 1700 & 2100 MORTH and directed by the departmental officers
7.47
5034
37608.76
... More
Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete and as directed by Engineer-in-charge
158.55
115
18253.86
... More
Brick Masonry in CM (1:4) with Modular Bricks 19 x 9 x 9 cms 2nd class complete excluding pointing and plastering as per drawig and technical specifications clauses 600,1202 & 1203 MORD/1300 MORTH including cost and conveyance of materials to site with all leads & lifts , all other incidental and operational charges etc., complete and as directed by the Engineer-in-charge
2.15
9099
19564.91
... More
Manufacture, Supply and Delivery of RCC NP4 Socket and Spigot pipes conforming to B.I.S. 458/2003 (rate per meter of effective length) inclusive of Transportation. - 500mm dia RCC NP4 pipe
37
3542
131086.93
... More
Lowering the RCC pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985 - 500mm dia RCC NP4 pipe
37
410
15201.45
... More
Environmental and Social Management Plan as per Standard norms and guidelines including cost of all materials, machinery, labour, all operations for finished item of work, as directed by Engineer in Charge
1
24196906
24196906.68
... More
Arrangement of transportation facility by four wheeler for purpose of site inspection and official use of the departmental officers and Engineers during execution period including fuel, maintenance charges & driver charges and the vehicle for not less than 3500 Km per Month and the vehicle should not be older than 5 years.
24
45000
1080000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%