Military Engineer Services Tender
To inquire about any e-tender the Andaman & Nicobar Islands government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder one can find every eprocurement Punjab tender on BidAssist. BidAassist has collated each and every Eproc Andaman & Nicobar Island Tender on its website. Looking for Andaman & Nicobar Island tenders online or going through the cumbersome government websites for it, has been made easier with the help of BidAssist.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date12 Jul 2024
Closing Date3 Sep 2024
Tender Amount₹ 40,00,000
Costs
EMD
₹ 80,000Document Cost
₹ 500Tender Fee
Refer Documents
Summary
Repairs Maint Of Floors Walls,sanitary Fittings And Fixture Plumbing And Other Connected Items In Md Accn And Otm Accn Under Age Br I Of Ge Brichgunj, Port Blair..
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_654173_2Bid Award Id
ViewTender No
8490ATender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
M&L for 25 mm bore unplasticised PVC pipes of pressure rating 10 Kgf/Sqcm fixed complete to walls, ceilings or in floors etc any type of pipe complete all as specified and as directed.
50
-
-
M&L for 20 mm bore unplasticised PVC pipes of pressure rating 10 Kgf/Sqcm fixed complete to walls, ceilings or in floors etc any type of pipe complete all as specified and as directed.
96
-
-
M&L for 15 mm bore unplasticised PVC pipes of pressure rating 10 Kgf/Sqcm fixed complete to walls, ceilings or in floors etc any type of pipe complete all as specified and as directed.
120
-
-
S&F in repairs for stop valves of 25mm bore dia of pipe, fancy type chromium plated, screwed down , high pressure, with crunch or butter fly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and as directed.
8
-
-
S&F in repair stop valves 15mm dia bore of cast copper alloy, screwed down, high pressure, with fancy type, chromium plated, screw both ends for union and fixed complete all as specified and as directed.
15
-
-
S&F in repairs for 20 mm dia bore gun metal , globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
8
-
-
S&F in repair 15mm bore pillar tap, Fancy type cast copper alloy with capstan heads, chromium plated screwed down, high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed.
10
-
-
S&F in repairs Bib tap of cast copper alloy chromium plated 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed.
15
-
-
S&F 2 Way Bib Cock Double handle with flange 15 mm bore cast copper alloy Chromium plated with wall flang, screwed down, screwed for pipes complete all as specified and as directed. (Make:- Prayag 6812 Bib Cock 2-Way Double Handle with Flange)
16
-
-
S&F repairs PVC connection 15mm size with CP brass Nuts of length 450mm complete all as specified and as directed.
15
-
-
S&F in repair PVC waste pipe 40mm dia for sink, complete all as specified and as directed.
15
-
-
S&F in repair PVC waste pipe, 32mm dia, for urinal complete all as specified and as directed.
30
-
-
S&F in repairs 32mm dia PVC waste pipe for wash hand basines, complete all as specified and as directed.
30
-
-
S&F in repairs Aluminium anodised chromium plated tubular towel rail, 20mm dia, D type, 60cm long, between flanges including suitable bracket complete all as specified and as directed.
15
-
-
S&F in repairs CP towel rings fixed with and including plated brass screws and wooden/plastic cleats (minimum weight 90 gms) complete all as specified and as directed.
15
-
-
S & F in repairs stainless steel, towel rack, 600mm long with 10mm dia four rods and 20mm dia four hooks complete all as specified and as directed as per Cera Catalouge CERA Meridien Stainless Steel Wall Mount Towel Rack 600 mm Chrome Plated, F5015101CH.
10
-
-
S&F in repairs, 10 ltr capacity, PVC flushing cistern, white, syphonic action type, low level, with inlet, ball valve float and handle, PVC flush pipe, brackets etc including taking down unserviceable flushing cistern etc, complete all as specified and as directed.
15
-
-
S&F in repairs Mirror of selected Quality glass 600 x 450mm, beveled edge mounted on 6mm thick plywood commercial fixed to wooden plugs with CP brass screws & cup washers, complete all as specified and as directed.
15
-
-
S & F in repairs 600mm x 800mm beveled edge mirror of selected quality glass, mounted on 6 mm thick commercial ply wood backing including aluminium frame and fixed in wall with wooden plug with chromium plated brass screws and cup washers complete all as specified and as directed.
15
-
-
S & F in repairs glass corner shelf, Cat No.1173 of Jaquar or equivalent, complete all as specified and as directed.
15
-
-
S&F in Repair wash hand Basin of size 375x475x130mm including all connecting fittings and brackets, Pillar Tap etc of Jaquar Cat Part No JDS WHT-25907, complete all as specified and as directed.
10
-
-
S&F in repair vitreous china squatting pan orissa pattern of size 580x440mm white with integral foot rest and including connection to trap and to flushing pipe, anti syphonage pipe etc. complete including making good to floor complete all as specified and as directed.
6
-
-
S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white including connection to trap and to flushing pipe, anti syphonge pipe etc, including making good the floor complete all as specified and as directed.
10
-
-
S&F in repairs plastic seat cover for EWC(Pedestal Pattern) solid type closet set complete all as specified and as directed.
20
-
-
Supply and fix vitreous china CASCADE type WC single piece-WC with PP seat Cover, hinges, fixing accessories set, cistern fittings complete of size 640 x 360 x 690 mm , P trap-180mm in approved colour all as specified and directed as per ISI mark. Make : Jaguar cat Part No. SLS-WHT-6851P or equivalent .
5
-
-
S&F in repairs vitreous China urinal, half stall type complete including waste pipe, flush pipe & providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement etc, and including connection to flushing pipe and outgoing pipes fixed in repairs complete all as specified and as directed.
2
-
-
S & F in repairs chromium plated hand shower (health faucet) 1 meter, with PVC tube with wall hook , complete all as specified and as directed. (Make : Jaquar or equivalent cat No ALD-CHR-593)
25
-
-
S&F in repairs coloured Toilet paper holder, vitreous China, box type fixed to wall with chromium plated brass screws complete all as specified and as directed.
15
-
-
S&F in repairs sink with drainage board made up of stainless steel 1mm thick for kitchen or laboratory with plug washers and waste fittings including bedding in CM 1:3 into dwarf wall or cantilever brackets and connecting union to pipe over all size 915mm x 460mm, bowl size 410 x 330 x 160mm etc complete all as specified and as directed.
8
-
-
S&F in repairs shower arm 190mm long light body with wall flange and exclusive shower single flow with revolving ball joint as per cat. No.477 / 493 of make Jaquar complete all as specified and as directed.
10
-
-
S&F in repairs Brass Chromium plated shower rose 125mm size, with swivel joint, fixing to steel pipe or union, complete all as specified and as directed.
10
-
-
S & F in repairs Angle Cock, 15 mm dia, cast copper alloy with capstan head, Chromium Plated, screwed down high pressure with crutch or butterfly handle for iron pipe etc. complete all as per Jaquar Catalogue No. CON-053 or its equivalent in Marc or Plumber complete all as specified.
10
-
-
Supply and fix in repair stainless steel plate rack of size 750x 787mm with all fittings as per sample all as directed
10
-
-
S&F in repairs PTMT gratings 125mm dia, complete all as specified and as directed.
12
-
-
S&F in repairs Rotational moulded (three layered, ISI marked) polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity including PVC cover, hoisted and fixed in position including connecting up pipes complete all as specified and directed.
12
-
-
S&F in repairs Rotational moulded (three layered, ISI marked) polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity including PVC cover, hoisted and fixed in position including connecting up pipes complete all as specified and directed.
10
-
-
S & F in repairs 15mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, minimum weight 142 gms, complete all as specified and directed.
15
-
-
S&F in repairs 15mm dia nipple of PTMT, suitable for HDPE water tank, min weight 38 gms, complete all as specified and as directed.
10
-
-
S&F in repairs 20mm dia nipple of PTMT, suitable for HDPE water tank, min weight 45 gms, complete all as specified and as directed.
8
-
-
Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed.
24
-
-
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.
8
-
-
Taking down and Refixing in the same opening of shutter of any description not exceeding 1 Sqm each including easing and adjusting as required complete all as specified and as directed
8
-
-
Taking down and Refixing in the same opening of shutter of any description but exceeding 1Sqm and not exceeding 2 Sqm each including easing and adjusting as required complete all as specified and as directed
4
-
-
Taking down and Refixing in the same opening of shutter of any description but exceeding 2 Sqm each including easing and adjusting as required complete all as specified and as directed
4
-
-
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing
35
-
-
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.
10
-
-
S & F Aluminium anodised (minimum anodisation is 50 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangements etc., complete with standard aluminium sections, complete all as specified and as directed.(Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections Hinges, handles and locking arrangements shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).
400
-
-
Supply only 4 mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed .
16
-
-
Supply only 12mm thick pre-laminated particle board, exterior grade, lamination on one side with decorative choice lamination and the other side balancing white lamination fixed with screws as in door panel, complete all as specified and as directed.
16
-
-
Supply only aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and as directed.
16
-
-
S upply only as in repairs Butt hinges, 100mm length extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21, complete all as specified and directed.
51
-
-
S& F Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips of sheet cast or extruded sections and fixing bolt or cast aluminium alloy& fixed complete all as specified and as directed.
16
-
-
S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and as directed.
32
-
-
S&F 150mm long extruded aluminium alloy anodised handles fabricated type, anodised complete all as specified and as directed.
32
-
-
S&F Aluminium (extruded section ) Door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.
16
-
-
S&F floor door stopper of length 140mm of Aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.
16
-
-
Supply and fix as in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.
20
-
-
S&F as in repairs Butt hinges, 100mm length extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21, complete all as specified and directed.
60
-
-
S&F as in repairs Butt hinges, 75mm length extruded aluminium anodised alloy with galvanised mild steel hinge pin, anodised and fixed type C-22, complete all as specified and directed.
27
-
-
S & F as in repairs aluminium alloy, anodised, sliding door bolt with hasp & staple (Bolt type) 300mm long and fixing clips of sheet, cast or extruded section and fixing bolt of cast aluminium alloy, complete all as specified and as directed.
20
-
-
S & F as in repairs aluminium, anodised, barrel tower bolt of extruded section, 150 mm long, complete all as specified and as directed.
40
-
-
S & F as in repairs aluminium, anodised, barrel tower bolt of extruded section, 100 mm long, complete all as specified and as directed.
32
-
-
S & F as in repairs 100 mm long extruded, aluminium alloy anodised handle, fabricated type, complete all as specified and as directed.
32
-
-
S & F as in repairs 150 mm long extruded, aluminium alloy anodised handle, fabricated type, complete all as specified and as directed.
40
-
-
S&F in repairs Aluminium (extruded section ) Door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
26
-
-
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stones, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
24
-
-
S & F 4 mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed .
16
-
-
S&F 4 mm thick sheet figured glass and glazing with rubber packing around the glass, in squares exceeding 0.50 sqm in each pane complete all as specified and as directed.
8
-
-
S&F in repairs 12mm thick pre-laminated particle board, exterior grade, lamination on one side with decorative choice lamination and the other side balancing white lamination fixed with screws as in door panel, complete all as specified and as directed.
15
-
-
Demolition of PCC Block walling built in CM 1:6 complete all as specified and as directed
8
-
-
M&L precast cement concrete block masonry with PCC solid blocks in 1:3:6 type C1 using 20mm graded stone aggregates, exc. 10cm in width and set in CM 1:4 complete all as specified and directed.
12
-
-
Taking down cement plaster any description incl racking out joints, hacking for key scrubbing down with water, etc complete all as specified and directed.
235
-
-
M & L for rendering 10 mm thick in CM I:6 finished even and smooth without using extra cement etc complete all as specified and directed.
80
-
-
M&L for rendering 15mm thick in two coats on faces of brick work or concrete surfaces; first coat (rendering coat) of 10 mm thick in cement mortar 1: 6 and second coat (finishing coat) of 5 mm thick in cement mortar 1: 4 mixed with water proofing compound (water proofing compound to be measured separately as supply only) and finished even and smooth complete all as specified and directed.
100
-
-
M & L for rendering 5 mm thick in CM I:3 on for ceiling surfaces, finished even and smooth without using extra cement etc complete all as specified and directed.
55
-
-
M&L for oil bound distempering two coats over a coat of alkali resistant priming paint including preparation of new plastered or unplastered surfaces of wall complete all as specified and directed.
80
-
-
M&L for oil bound distempering two coats over a coat of alkali resistant priming paint including preparation of new plastered or unplastered ceiling surfaces complete all as specified and directed.
55
-
-
M&L for oil bound distempering one coats over a coat of alkali resistant priming paint including preparation of new plastered or unplastered surfaces of wall complete all as specified and directed.
80
-
-
M&L for oil bound distempering one coats over a coat of alkali resistant priming paint including preparation of new plastered or unplastered ceiling surfaces complete all as specified and directed.
55
-
-
M& L for Finishing walls with Acrylic smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) etc complete all as specified and as directed. (Make Apex Ultima)
100
-
-
Preparation of old external surfaces of walls, Facias, cornices etc and applying one coat of weather proof anti fungal paint (Apex - ultima) on walls all as per manufacturer instruction complete all as specified and as directed.
250
-
-
M & L For Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed.
640
-
-
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises.
175
-
-
M/L 25mm thk PCC 1:2:4 type B-0 using 12.5 mm graded agg as in flooring finished fair and even without using extra cement.
175
-
-
M & L for Dark coloured vitrified tiles 10 mm thick (square/rectangular) polished, area of each tiles n exc. 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed with coloured or white cement to match including screed bed 15mm thick 1:4, complete all as specified and as directed.
40
-
-
All as per item no 88 here in before, except screed but on vertical surfaces including 10mm thick CM 1:3 as in backing coat of dado/Skirting
8
-
-
M&L non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm and not exceeding 0.38 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over 15mm thick screed bed in CM 1:4
55
-
-
All as per item No 90 here in before, except screed but on vertical surfaces incl 10mm thick CM 1:3 as in baking coat of dado/skirting
8
-
-
M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm n.exc 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed with coloured cement to match the colour of tiles over and including screed bed or bedding layer of mortar 10mm thick in CM 1:4 for laying floor finishes complete all as specified and directed.
40
-
-
M&L for coloured glazed ceramic tiles, 350x 250x 7mm/ 450X 350X 7mm thick on vertical surfaces set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tile over and including rendering 10mm thick in CM 1:3 complete all as specified and as directed.
40
-
-
Material and labour Chequered cement concrete tiles, with grey cement and pigment 30cm x30cm x20mm thick set, jointed and pointed in neat cement slurrry in floors including 15mm thick screed bed in Cm 1:4 all as specified and directed.
70
-
-
M&L for 20mm thick Granite of any type work table rubbed and polished in steps, jambs , pillars, cooking platforms and the like including pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including Screed bed of coat 20mm thick CM (1:4) complete
6
-
-
M&L for 20 mm thick granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12 mm thick in cement mortar (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
8
-
-
Demolition of PCC in ground floor or paving n.exc 15 cm thick above or below ground level
15.6
-
-
M&L PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection , of 75 mm thick finished fair and even, using extra cement complete all as specified and as directed
80
-
-
M&L 100 mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in sub bases,
96
-
-
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets Including frame of any description and any thickness, fixed in any position .
130
-
-
Material and labour for false ceiling with aluminum grid work (Size of grid 600x600 mm) with 35 x 25 x 1.5 mm main tee and 25 x 25 x 1.4 mm cross tee and wall angle and suspended with 2mm dia GI wire hooked to roof with needful adjustment bolts at an interval of 1.20 m centre to centre staggered and board with Eco board decorative type size 600 x 600 x 4 mm thick finished with two coats of oil bound distemper over a coat of primer on exposed surfaces all as specified and directed.
100
-
-
S&F as in repairs Eco board / tiles for insulation and acoustic purpose of size 600 X 600 X 4mm thick fixed with screws or with staples to aluminium frame work including two coats of oil bound distemper over a coat of primer complete all as specified and as directed.
30
-
-
Dismantling timber scantlings 40 sq. cm and over in section, for framed section in any position
0.5
-
-
Material & labour 2nd class hardwood plain, solidstraight chowkhats and frames, wrought, framedrebated on the solid,rounded or chamfered, put together with glue pinned at joints, all as specified and directed.
0.5
-
-
S&F 30mm thick Flush shutters, solid core construction, with block coard core & plywood face panels commercial type on both side including liping beading all round as in Door Shutter,Cup board shutter & Kitchen rack all as specified in SSR Part I, Section 8, clause 8.20(c)
10
-
-
Dismantling boarding of any description, fixed in any position with nails/screws
24
-
-
M & L for French Polishing on surfaces of any description, width or girth including preparation of Old surfaces, tor wood surfaces of any description over a coat of wood filler as required of any description, width or girth complete all as specified and as directed.
48
-
-
M&L Preparing new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
10
-
-
M&L Preparing existing wood or wood based surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
100
-
-
M & L for Polishing and Buffing of Stainless Steel surfaces of any description, any width or girth complete all as specified and as directed.
32
-
-
Dismantling for plain or corrugated roof sheeting of any description, any gauge, thickness, including Removing L-type or J-type bolts in Roof Covering.
145
-
-
S&F Pre-painted galvalume aluminium zinc coating GI based (corrugated/semi corrugated) sheet 0.50mm thick as per approved profile, coloured, having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified
130
-
-
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
15
-
-
M&L for removing loose and broken concrete by chiselling /picking etc upto a depth of 10 to 20 mm from floor/roof slab/chajjas and similar structural members cleaning the dismantled portion with wire brushes etc to remove dust, dirt and other foreign particles including necessary scaffolding etc and removal of debris to a distance not exceeding 50m, complete all as specified and as directed.
20
-
-
M&L for application of high build polymer cement sand mortar 1:2.5 with water cement ratio 0.35 to 0.45 mixing with Nito bond SBR @ 5 ltrs per 50 Kg cement on ceiling / chajja surfaces 10 to 20mm thick in two layers over slurry priming coat of 1 volume Nito bond SBR to 1 volume water, 3 volume fresh cement (5 sqm per litre Nito Bond SBR) etc all as per manufacturers instructions, including painting/finishing to match with the existing complete all as specified and as directed.[ Note : Nitobond SBR shall from Fosroc chemical (India) Pvt Ltd or equivalent chemicals of MC Bouchemics/Beck]
20
-
-
S&F 12 mm thick toughened glass in required size crystal polished at the edges and with full etched design as approved by GE in different colours fixed with SS brackets of size 50x25mm,100mm long made out of 3mm thick SS sheet at the top and bottom including provision of Dorma XLC fittings & Dorma floor springs or SS pivot, stainless steel handles 600mm D type and locking arrangement to each door, stainless steel hinges to connect glass to glass, wall to glass connector, magnetic seal, middle seal and the water dispenser etc all as specified and directed.
12
-
-
S&F 12mm thick toughened glass in required size crystal polished at the edges and with full etched design approved by GE in different colours fixed with SS brackets of size 50x25mm,100mm long made out of 3mm thick SS sheet at the top and bottom including provision of stainless steel hinges & brackets to connect to SS railings glass to glass, wall to glass connector, magnetic seal, middle seal etc all as directed
6
-
-
M & L for removing loose and broken concrete by chiseling / picking etc upto a depth of 80 to 100mm from columns, beams and similar structural members, cutting edges, clearing the dismantled portion with wire brushes etc., to remove dust, dirt and other foreign particles etc., and washing with clean water with pressure including necessary scaffolding and removal of debris to a distance n.exc 50m, complete all as specified and as directed.
25
-
-
M&L for non shrink, cementitous micro concrete mixed with 12.5mm graded stone aggregate using Renderoc RG or equivalent by weight (18 Kg Aggregate :25 Kg Renderoc RG) respectively (as per manufatures instruction) laid in average thickness 80 to 100 mm in surface of columns, beams, parapets and similar structural members including use and waste of water tight form work, complete all as specificed and as per directed.
1.5
-
-
M&L for applying one coat epoxy bonding agent @ 2.6 sqm/lit or as per manufactures instruction to old concrete surfaces of columns, beams and similar structural members complete all as specified and as per directed. Make Nitobond EP of Fosroc or equivalent
25
-
-
S&F Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
100
-
-
M&L in repairs water proofing treatment to RCC roof by priming the plastered surfaces with a coat of cold applied bituminous primer conforming to IS 2488 @ 0.30 kg/sqm and laying APP modified five layer polymeric membrane 3mm thick of minimum wt. 3.50 kg/sqm reinforced with polyster non woven fabric (weighing not less than 150 gms/sqm) laid by torch application as per the manufacturers instructions with side overlap of 75mm & end overlap of 100mm & tucked into the chases on vertical surfaces to a height of 300mm & finally finished with bituminous aluminium paint @ 0.10 kg/sqm complete including taking down existing roof treatment all as specified and as directed.
70
-
-
M&L for 25 mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in padding to roof slab and rendering 10 mm thick in one layers on concrete surface cement sand mortar 1:4 using water proofing compound @ 3% by weight of cement finished even fair and smooth without using extra cement complete all as specified and as directed. Note:WPC will be measured and paid separately.
70
-
-
Supply only integral water proofing compound complete all as specified and as directed.
24
-
-
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed
2.9
-
-
S & F MS Steel work in tubular trusses and tubular posts/ purlins including special shaped washers etc., complete using ERW or induction butt welded tubes conforming to IS :1161-1979 grade st-240 including notching, drilling, fitting, riveting and/or welding or connecting with bed plate, bolt and nuts complete all as specified and as directed
150
-
-
S & F plates (Plain or chequered), channels, square cut or notched (ordinary and counter sunk) forming holes with attachment etc and fixed by riveting or welding or with nut and bolts (including nut and bolts) conforming to Fe- 410-W Grade E- 250, quality B, complete all as specified and as directed.
40
-
-
M & L for preparing steel/ Iron surfaces of any description exc 10cm Width or Girth and applying two coats of synthatic enamel paint over one coat of Redoxide primer complete all specifiedcand directed.
75
-
-
M & L for preparing steel/ Iron surfaces of any description exc 10cm Width or Girth and applying two coats of synthatic enamel paint over one coat of Redoxide primer complete all specifiedcand directed.
100
-
-
S&F in repatrs aluminium composite panel sheet of 3mm to 4mm thick, fixed on existing aluminium frame work with plastic strips (double sided sticker) of suitable size of varying thickness of 10mm to 30mm over the existing aluminium work, applying adhesive over aluminium sections for fixing composite panel and fixed with screws. The joints of panels shall be filled with weather proof sealant,The board shall be stuck with a layer of any colour high intensity reflective grade polymer sticker installed using epoxy adhesive, complete all as specified and as directed.
20
-
-
M & L for Providing 15mm thick superior quality chemical pressure treated edged glued finger jointed rubber wood boarding tongued grooved fixed over rubber wood frame work with rubber wood runner of size 50mm x 15mm fixed at 1200mm c/c horizontally by secret nailing with brass screws duly fixed to wall including provision of designed rubber wood beading on top and bottom termination of wood boarding and finished with two coats of melamine polish over a coat of honey/natural colour wood filler putty etc, including preparation and applying sand paper and finishing to a glossy/mat finish complete all as specified and as directed. Make : RUBCO or Equivalent
15
-
-
Supply and fix in repair decorative type curtain rod aluminium alloy including anodised decorative brackets etc complete all as specified and as directed.
120
-
-
Supply and fix in repair bracket decorative type brass chromium plated aluminium alloy anodised for 20mm dia curtain rod complete all as specified and as directed.
56
-
-
S&F in Repair Brass Mortice Lock, Vertical type size 65 mm, 4 lever of approved make all as directed.
8
-
-
S&F in Repair Brass Lockers, Drawer, grade-I,size 50mm 4 levers of approved make all as directed.
10
-
-
S&F in Repair Brass 40mm dia Cupboard Knobs fixed with nut, screw and washer, bright finished.
40
-
-
Running welding in repairs of N exc 6mm thickness of metal to MS Door & Window frames to shutter.
35
-
-
S&F in Repair CP Roller to Sliding Glass complete all as specified and as directed.
20
-
-
S&F in Repair 15mm dia Magic Eye complete all as specified and as directed.
15
-
-
Supply and fix in aluminium snake guard comprising nylon bristle duly secured with aluminium flat section of minimum width 30 mm and length 900 mm fixed to bottom rail of door shutter using aluminium screws complete all as specified and as directed
16
-
-
M&L Fulsh Kit for low level Flushing Cistern complete all as specified and as directed.
20
-
-
M& L for decco grill of aluminium section complete all as specified and as directed.
22
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements