Military Engineer Services Tender
To inquire about any e-tender the Andaman & Nicobar Islands government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder one can find every eprocurement Punjab tender on BidAssist. BidAassist has collated each and every Eproc Andaman & Nicobar Island Tender on its website. Looking for Andaman & Nicobar Island tenders online or going through the cumbersome government websites for it, has been made easier with the help of BidAssist.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date10 Sep 2024
Closing Date1 Oct 2024
Tender Amount₹ 45,00,000
Costs
EMD
₹ 90,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_673692_1Bid Award Id
ViewTender No
8869/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Taking down chowkats or frames (without taking down Shutters from frame) size n exc 1.5 sqm each all as specified and directed.
5
-
-
M&L for second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue and pinned at joints including preservative treatement all as specified.
0.3
-
-
M&L for second class hard wood 35 mm thick plain frames panelled door shutters (any number of pannels) with of veenered particle boardmedium density wood particle boards with commercial face supplied and fitted to chowkats complete all as specified and directed
10
-
-
S&F 35 mm thick second class hardwood glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass, etc size of members as specified in SSR Pt-I section 8 clause 8.24 (a), in II nd class hard wood complete all as specified and directed.
10
-
-
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube ,all as per specifications and drawings .
20
-
-
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour pvc sheet for top rail and bottom rail ,pannelling of plain colour pvc sheet to be fitted in the MS frame welded/ sealed to the styles and rails with suitable pvc sheet beading and jointed togrther with solvent cement S&F in the frame at site as per specification and drawings.
8
-
-
M&L for aluminium partition, window and door with frame and shutters fully or partly glazed , sliding / openable / fixed / fully glazed and pannels with 12mm thick pre-laminated partical board including all fittings (supply only floors spring, glass, Imax hinges, partical board, gauze will be measured separately) the size of aluminium sections shall be all as specified in relevant IS code and SSR Part-I.
100
-
-
Supply and fixed in repairs stainless steel IMAX hinges for aluminium window shutters.
18
-
-
Supply only aluminium alloy wire cloth 0.45 mm nominal dia of wire and average with of aperture 1.40 mm and fixed with aluminium wire staples all as specified and directed.
6
-
-
S&F in repairs for aluminium alloy wire cloth 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminium wire staples all as specified and directed
5
-
-
Hacking out old broken glass(any thickness, size, quality or description) from wooden frames /steel frame/aluminium frame or stone, concrete or brick surrounds , glazed with putty or fixed with beads all as specified and directed .
6
-
-
S & F for 4 mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.
5
-
-
S & F for 4 mm thick sheet figured glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.
4
-
-
M&L for 12 mm prelaminated particle board,interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination in cup board shutters all as specified and directed.
4
-
-
S & F for 150mm extruded aluminum alloy handles anodized complete all as specified and directed.
26
-
-
S & F in repairs for 150mm extruded aluminum alloy handles anodized complete all as specified and directed.
10
-
-
S & F for 150mm aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.
26
-
-
S & F fixed in repairs for 150mm aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.
13
-
-
S&F for 100mm long butt hinges, extruded aluminium alloy with gavanised mild steel hinge pin,anodised,type B-21 all as specified and directed
30
-
-
S&F in repairs 100mm long butt hinges, extruded aluminium alloy with gavanised mild steel hinge pin,anodised,type B-21all as specified and directed
10
-
-
S&F 300 mm long aluminium anodised sliding door bolt with hasp and staple ( bolt type ) and fixing clips of sheet sliding bolts of extruded sections and fixing bolts and sliding bolts of extruded section all as specified
10
-
-
S&F in repairs 300 mm long aluminium anodised sliding door bolt with hasp and staple ( bolt type ) and fixing clips of sheet sliding bolts of extruded sections and fixing bolts and sliding bolts of extruded section all as specified
5
-
-
S&F 250 mm long aluminium anodised sliding door bolt with hasp and staple ( bolt type ) and fixing clips of sheet sliding bolts of extruded sections and fixing bolts and sliding bolts of extruded section all as specified
5
-
-
S&F floor door stopper of aluminium alloy body and tongue with hard drawn steel spring, over all length 140mm complete all as specified and directed.
8
-
-
M & L fixed as in repair for floor door stopper of aluminum alloy body and tongue, anodized with hard drawn steel spring, fixed in floor (150mm size), complete all as specified and directed.
8
-
-
M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
25
-
-
S&F in repairs anodised aluminium curtain rod decorative type powder coated 20mm dia fixed including brackets complete all as specified and directed.
20
-
-
Supply and fixed for any colour fancy type curtain rods with design head of both side of the curtain rod complete all as directed and approved by EIC.
40
-
-
S&F in repairs aluminium (die cast) body, door closer hydraulically regulated designation No. 3, universal type, suitable for door shutters of 851 to1000 mm width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.
5
-
-
Demolition of cement concrete as in block masonry built in cement mortar.
5
-
-
M&L for pre-cast cement concrete block masonry with solid block, masonry exc 10cm width in PCC l:3:6 type C1 using 20mm graded stone aggregate built in CM 1:6 complete all as specified and directed.
5
-
-
M&L for pre-cast cement concrete block masonry with solid block, masonry exc 10cm width in PCC l:3:6 type C1 using 20mm graded stone aggregate built in CM 1:4 complete all as specified and directed.
20
-
-
Taking down cement plaster on brick/stone masonry wall incl raking out joints, hacking for key, scrubbing down with water etc all as specified and directed..
160
-
-
M&L for rendering 10 mm thick cement plaster in CM (1:6), in patches on stone masonry/ brick work or concret surfaces, surface finished even and smooth without using extra cement complete all as specified
160
-
-
M&L Rendering 15 mm thick in two coats 5mm thick in CM 1:4 with WPC over 10mm thick in CM 1:6 of fair faces of brick/concrete surface finished even and fair without using extra cement. Note : WPC will be mesured and paid separetally.
140
-
-
Supply only integral water proofing compound
39
-
-
M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of Chalk whiting, on plastered surfacesprimer all as specified.
160
-
-
M&L for preparation of new plastered surfaces of wall and applying two coat of antifungal exterior emulsion over a coat of primer all as per manufacturers instruction and as specified complete.
140
-
-
Dismantling floor, hearth or wall tiling including CM bedding, removing rubbish off the premises complete all as specified and as directed.
181
-
-
M&L for glazed ceramic designed coloured tiles as in vertical surfaces of size 300x450x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match designed incl 10 mm thick backing coat in CM (1:3) complete all as specified.
100
-
-
M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:4) complete all as specified.
41
-
-
M&L for non-skid Ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. and including 15mm thick layer of screed bed in cm 1:6 on floor surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
10
-
-
M&L for Vitrified ceramic coloured tiles ( approved shade) of polish area of each tiles not exceeding 0.36 Sqm , 9 to 10 mm thick in floor, set & jointed in neat cement slurry including a layer of screed bed 15mm thick 1:6 and pointed in coloured cement to match the shade of tiles over cement screed bed all as specified
30
-
-
S&F in repair for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified and directed .
10
-
-
S&F for 110mm dia PVC (SWR) bends any radius complete all as specified and directed by Engineer -in-charge
6
-
-
S&F in repair for 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified and directed by Engineer -in-charge
20
-
-
S&F for 75mm dia PVC (SWR) bends any radius complete all as specified and directed by Engineer -in-charge
6
-
-
Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store all as specified and directed
65
-
-
Taking up or down 15mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed
65
-
-
S&F 20mm outer dia CPVC pipes SDR 13.5 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including suitable reducer for 15mm dia taps fitting as required complete all as specified
45
-
-
S&F of 25mm outer dia CPVC pipes SDR 13.5 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified
45
-
-
S&F 20 mm bore tube medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed .
20
-
-
S&F 15 mm bore tube medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed.
20
-
-
Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girth
30
-
-
M & L for fixed in repairs PVC valveless, syphonic action type flushing cistern of 10 litres capacity, white colour, with inlet, ball valve, float and handle inclufing brackets all as specified and directed
31
-
-
S & F in repairs flush pipe of polythelene of low or high dencity or PVC 32mm dia for flushing cistern all as specified and directed
19
-
-
S&F in repairs white vitreous china wash down water closet pan (pedestal pattern) with PVC seat cover with mild steel chromium plated or aluminised hinging device including connection to down pipe and flushing pipe all as specified.
5
-
-
S&F for fixed in repairs wash hand basin vitreous china white (flat back) of size 550x400mm including 15 mm dia pillar cock , CI bracket 15mm dia polythene connection 450mm long , 32mm dia waste coupling and 32mm dia PVC waste pipe 900mm long etc. complete all as specified, including taking down the existing wash hand basin all as specified and directed.
7
-
-
S & F in repair for PVC connection 15 mm size with PTMT nut of length 600 mm long all as specified and directed.
10
-
-
S & F in repairs for Plastic water closet seat, white, closed pattern with flat bottom, and cover and stainless steel/ PVC or aluminium hinging device as required all as specified and directed.
28
-
-
S&F for in repairs 15 mm bore bib taps cast copper alloy chromium plated with capstan headed handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed..
18
-
-
S & F in repair 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and directed.
8
-
-
S&F in repair angular stop cock, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for unions complete all as specified and as directed Make : Jaquar Cat part No CON-053KN or equivalent in Prayag / Parryware
20
-
-
Supply and fixed in repairs CP brass hot and cold 15mm dia wall mixture 3-in-1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting leg & wall flange complete all as directed. (Make -Jaquar Cat. Con-281KN or equivalent in Prayag / Parryware
2
-
-
S&F in repair WHB mixer, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, with long shank with central hole screwed down, screwed both ends for iron pipe or for unions complete all as specified and as directed Make : Jaquar Cat part No CON-167KNB or equivalent in Prayag / Parryware
10
-
-
Supply and fixed in repair CP bib cock 15mm dia with crutch handle as approved fancy type long body (Make-Jaquar Con-107KN) or equivalent in Prayag / Parrywarecomplete all as specified and directed.
20
-
-
S&F in repair Toilet paper holder Make : Jaquar Code (ACN-1153N) or equivalent in Prayag / Parryware complete all as specified and directed.
13
-
-
S&F in repair CP Single Towel Rail 600 mm long Make : Jaquar (AQN 7711) or equivalent in Prayag / Parryware complete all as specified and directed.
18
-
-
S & F health faucet, brass, chromium plated with 8mm dia, 1.0m long flexible tube with wall hook, screwed for iron pipe or brass ferrule 15mm dia or bore, fixed complete all as specified and as directed. Make : Prayag, Parryware or equivalent
19
-
-
S&F in repairs stainless steel grating cover 100mm dia fixed with white cement all as specified and directed.
10
-
-
Supply and fix Vitreous China urinals, Half stall type coloured, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) and including PTMT urinal spreader, PTMT 32mm bore dia waste coupling and waste pipe complete, fixed in repairs all as directed.
2
-
-
S&F in repair towel ring round Make Jaquar AQN -7721 or equivalent model in Parryware / Prayag
10
-
-
S&F in repair vitreous china wash down closet pane (Pedestal pattern white) standard size with 'S' or 'P' trap and other connecting items approved brand including fix with white cement complete all as specified Make : Jaquar (Cat Part No : LYS WHT 0314) or equivalent
1
-
-
S&F in repair chromium plated soap dish of size 120x80mm, fixed to plugs with chromium plated brass screws complete all as specified
10
-
-
S&F in repair Mirror cabinet PVC/fiber of size 550 x 520 x 100 mm with sliding mirror 4mm thick of size 240 x 290 x 2 Nos with built in rack of size 230 x 150 x 90 mm with PVC plug etc with CP towel rail of length 270 mm and 100 mm dia. Make:Supreme or equivalent
5
-
-
M&L for heavy duty Non skid tiles of size 300x300x9mm thick or high dimension (except thickness) of any colour any design durastone, weather proof impact ressistant, abrasion resistant exterior tiles, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed
25
-
-
M & L for Double action spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.
4
-
-
Dismantling structural steel work including doors, gates but excluding framed truss etc.
8
-
-
S&F for roof trusses (framed), trussed, purlines, and fasteninf and heavy brackets framing (beam, tee, angle, channel or flats section) including distance pieces, cleat etc conforming to Fe-410 (Gde-E250) quality -A complete all as specified and as directed.
400
-
-
S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete using Steel Fe-410-W (Gde-E-250) quality A complete all as specified and as directed.
400
-
-
Dismantling plain or corrugated steel sheeting any guage, thickness including nainital or similar pattern roof covering.
215
-
-
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws in semi circular/ curved shape all as specified and directed.
170
-
-
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
45
-
-
M&L for aluminium wind tie of any size fixed with self tapping screws of size 50/75mm with integral EPDM washer in roof covering.
115
-
-
M&L for mild steel hold fasts, bands, straps, supports or stays for rainwater, brackets/clamps for eaves/barge boards and valley gutter and similar articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
40
-
-
Demolition of Cement concrete in ground floor on paving n.exc 15 cm thickness (below or above ground level all as specified and directed.
10
-
-
M&L PCC 1:4:8 type D-2 (40mm graded stone aggregate ) for sub base 100 mm thick all as specified and directed.
100
-
-
M & L for PCC 100mm cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in sub base all as specified and as directed
50
-
-
M&L chequered Cement concrete tiles 30 cmx30cmx 25 mm thick set, jointed and pointed neat cement slurry in floor with grey cement and pigments , incl CM (1: 4) 20 mm thick screed bed all as specified and directed by Engr-in-Charge.
75
-
-
Demolition of stone slabs and tiles of any description laid bedded and pointed in mortar all as specified and directed..
0.4
-
-
M&L for 18 to 20 mm thick granite( of any type)(table rubbed and polished) in cooking plat forms, steps, cills, pillars and like in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including 15 mm thick Screed bed CM 1:4 all as specified .
4
-
-
Dismantling of ceiling boarding in description fixed in any position
250
-
-
M&L for anodised aluminium snap grid frame work for false ceiling with size of grid 605mm x 605mm all as specified in SSR Part-I 2009, hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat iron 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including cutting, drilling, jointing etc., 4mm thick non-asbestos fibre cement building design boards duly applied with two coats of oil bound distemper over a coat of primer fixed or laid/ inserted to aluminium frame work with screws complete all as specified and as directed.
125
-
-
M & L for seamless designed gypsum board false ceiling 12mm thick including for any sunk or raised moulding with 25mm long self drilling/ tapping screws having philips head with joining compound and 48mm wide fiber tape to provide seam less finish and including GI frame work of seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flange of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm c/c intermediate channel 0.9mm thick having two equal flanges of 15mm suspended from soffit at approx 900mm c/c with GI cleats and steel expansion fasteners with and incl ceiling section ( not exc 1.2m length) of 0.55mm thick having kurled web of 50mm an flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting across the intermediate channel at 457mm c/c incl hangers 6mm dia GI adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete and finally applying two coats of oil bound distemper with roller finish over a coat of primer complete all as specified and directed.
125
-
-
M&L for complete removal of old decorated surfaces of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.cornices complete all as specified and as directed.
2420
-
-
M&L for preparation of old brick/concrete surfaces of walls and cornices by broomingn down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots etc and applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 0.75 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm.
4450
-
-
M&L for complete removal of old decorated surfaces of walls and cornices and applying two coat of distemper oil emulsion over a coat of primer complete all as specified and as directed.
1500
-
-
M&L for preparation of old decorated surfaces of walls and cornices by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots etc and applying one coat of distemper oil emulsion complete all as specified and as directed.
3200
-
-
M&L for preparation of old surfaces of ceilings and cornices by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots etc and applying one coat of distemper oil emulsion complete all as specified and as directed. .
550
-
-
M&L for preparing old surfaces of wood and wood based material exceeding 10cm in width or girth and applying one coat of synthetic enamel paint all as specified and as directed.
550
-
-
M&L for preparation of old surfaces of steel surfaces exceeding 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed by Engr-in-Charge.
220
-
-
M&L for preparation of new steel and iron surfaces of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint of first quality over a coat of red oxide zinc chrome primer complete all as specified and as directed.
70
-
-
M&L for preparation of old painted surfaces of walls/concrete, kerb stone etc of any description over 10cm girth or width not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.
60
-
-
M & L for Dismantling boarding, any description, fixed in any position with nails.
40
-
-
M & L for prelaminated particle board 18-19mm thick (ISI Make), interior grade prelaminated one side with decorative choice laminations and other side balancing white lamination, fixed with screws to timber, steel frame work as in shelves or shutters, panelling etc,fixed in repairs, complete all as specified and directed.
10
-
-
M&L for 18mm thick designed rubco hut rubber wood frame shutter for cupboard, WHB counter cupboard, wall with finish to match all adjoining surfaces including sanding and applying mixture of filler and NCD thinner (Sheenlac make), pasting chalk putty, applying sealer (Sheenlac make) and wall nut colour stainer and finally applying waxpol (Silicon make) complete all as specified and as directed
10
-
-
M&L for 18mm thick HDF boarding (Fire and water proof) as in cup boards exterior grade with one side white lamination and other side coloured prelaminated, size of the cabinet as per requirement of the site complete all as specified and as directed by Engr-in-Charge. Make : bajaj/ Axis/Greenply/ Amnchidply or equivalent. Note : (i) Cutting edges of cupboard shutter/ shelves to be finished with adhesive edge binding tape all as directed
20
-
-
M&L in repairs for 32mm dia waste coupling fittings, brass, chromium plated for basin etc with long screwed shanks and fly nut and bedded in red lead cement other complete all as specified
13
-
-
S & F in repair three layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 Ltr in Capacity hoisted and fixed in position all as specified in SSR Part - I including disconnecting the water tank.
1
-
-
S & F in repair three layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 Ltr in Capacity hoisted and fixed in position all as specified in SSR Part-I including disconnecting the water tank.
1
-
-
S & F Looking mirror size 600x450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm th AC building board or commercial plywood and fixed to wooden plugs with cromium plated brass screws and cup washers.
4
-
-
M & L for preparation of old wooden surfaces and applying melamine polish through the process of sanding with wood sanding paper of size 60 & 80 and applying wood filler mixed with NCD thinner including applying wood putty on shabby/ nailing area and sanding with sand paper of size 120 and applying sealer and walnut colour stainer and sanding with sand paper of size 320 and melamine polishing with spray application and again sanding with 400 sand paper and finally applying silicon of make Waxpol with soft fine cloth for better shining and finishing complete
20
-
-
M&L for aluminium composite panel sheet of 3mm thick with skin thickness of 0.25mm of aluminium on both sides, sandwiched by 2.5mm polyethylene core with PVDF coating of 30.0 micron fixed over frame made up of aluminium hollow section of 25x50mm, 2.0mm thick, duly fixed to wall/ceiling with expansion fastener having panels not exc 1200x1200mm with necessary silicon filling, in approved pattern as in columns, beams, walls etc complete all as specified and as directed. Note : Necessary scaffolding required for the work upto three storeyed Bldg shall be deemed to include in the unit rate quoted
20
-
-
Taking down carefully old unserviceable aluminum/ copper point wiring (light, fan, socket or power) complete, including fittings & fixtures such as switches, ceiling roses, lamp holders, pendants, regulators sockets, light fittings, junction/terminal boxes etc; removing from site and making good disturbed surfaces of walls, floors etc., to match with existing surrounding surfaces complete all as specified and as directed.
55
-
-
Taking down existing unserviceable main switches/ distribution boards/Fuse Units of any description alongwith MCBs/MCCBs and making good disturbed surfaces to match with existing surrounding finishes complete all as specified and as directed.
4
-
-
Taking down carefully old unserviceable light fittings only and removing from site complete all as specified and as directed.
121
-
-
Taking down existing unserviceable sub main wiring of any description and making good disturbed surfaces to match with existing surrounding finishes complete all as specified and as directed.
121
-
-
M&L for Point wiring complete with 1.5 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC casing and capping of suitable size (not less than 25mm) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 1.5 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in CI boxes/pressed steel terminal boxes 60mm deep made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint outside and with two coats of aluminium paint inside and laminated sheet cover of 3 mm thick on top for housing the switches, socket outlet etc, all as specified and as directed for the following :-
-
-
-
ONE LIGHT/FAN point controlled by one, one way 5 Amps switch.
18
-
-
ONE 5A SOCKET OUTLET point controlled by one, one way 5 Amps switch on independent board.
13
-
-
ONE 5A SOCKET OUTLET point controlled by one, one way 5 Amps switch on same board.
12
-
-
ONE BELL point controlled by one, one way 5 Amps switch.
3
-
-
Description same as per item Sl No 121 above but point wiring with two single core 4.0 Sqmm size cables and one 4.0 sqmm green colour cable as earth continuity conductor for one 3 pin 15 Amps socket out let on independent board complete all as specified and directed.
9
-
-
S & F Switch piano, flush type, single pole one way 5 amps all as directed. Make: Anchor/Cona/Legrand
60
-
-
S & F Switch piano, flush type, single pole one way 15 amps all as directed. Make: Anchor/Cona/Legrand
17
-
-
S & F socket outlet 2 in 1, 3 pin 5 amp, flush type, universal all as directed. Make: Anchor/Cona/Legrand.
36
-
-
S & F Socket outlet 2 in 1, 3 pin, 5 and 15, flush type, universal all as directed. Make: Anchor/Cona/Legrand.
17
-
-
S & F bell push switch, flush type, single pole, 5 Amps, 240 volts AC all as directed. Make: Anchor/Cona/Legrand.
3
-
-
M&L for ceiling rose, three terminal, 65x20mm size, PVC/Polycarbonate, insulated body, 5A, 240 volts complete all as specified and as directed.
16
-
-
S&F in repairs switch socket combination box type 2 in 1, 5 pin, 5 Amps, flush type,universal complete all as specified and as directed. Make: Anchor/Cona/Legrand
10
-
-
S&F in repairs switch socket combination box type 2 in 1, 6 pin, 5 Amps & 15 Amps, flush type,universal complete all as specified and as directed. Make: Anchor/Cona/Legrand
7
-
-
S&F electric bell, ding dong type, AC, 230 volts complete all as specified and as directed.
3
-
-
S&F in repairs fan regulator, electronic socket two module step type 120W complete as specified.
Make : Anchor/Cona/Legrand
10
-
-
S & F for switch modular type, 6 Amps 1 module, 230 volts AC circuit complete all as specified and directed. Make-Roma (Anchor) / Havells (Crabtree) / Legrand
13
-
-
S & F for socket outlet modular type 1 way 6 Amps, 3 pin, 230 volts AC circuit complete all as specified and directed. Make-Roma (Anchor) / Havells (Crabtree) / Legrand
13
-
-
S & F for switch modular type, 16 Amps 1 module, 230 volts AC circuit complete all as specified and directed. Make-Roma (Anchor) / Havells (Crabtree) / Legrand
9
-
-
S & F Socket outlet 2 in 1 modular type, 3 pin, 6 and 16, universal complete all as specified and directed. Make-Roma (Anchor) / Havells (Crabtree) / Legrand
9
-
-
S & F modular bell push 5 Amps 1 modular 230v, 50Hz AC complete all as specified and directed. Make-Roma (Anchor) / Havells (Crabtree) / Legrand
4
-
-
S & F stepped type modular fan regulator, 2 modular type complete all as specified and directed. Make-Roma (Anchor) / Havells (Crabtree) / Legrand
10
-
-
S & F in replacement of capacitor 2.5mfd, 230 Volts for ceiling fans including taking out old unserviceable one complete all as specified and as directed. Make:- Capco/ Univarsal/ Tibcon/ Epcos
37
-
-
Taking down carefully ceiling fan of any sweep/ cap/ make from its existing position of any height/ loaction after disconnecting from electricity, dismantling blades, opening up for carrying out servicing/over hauling, examining for damaged worn out parts like shaft, ball bearings etc., and applying grease to bearings, assembling back, preparing painted surfaces by cleaning dust, grease etc., and by filling cavities with filler to receive spray paint using synthetic enamel paint of existing shade, fixing up blades and hanging back in position and providing and connecting up with 1.0 sqmm twin core twisted flexible copper conductor of suitable length from connector of fan to ceiling rose and testing complete all as specified and as directed.
NOTE: Spare parts like ball bearings, shafts etc shall be replaced only if found damaged and certified by Engineer-in-charge. If spares are replaced, they shall be measured and paid separately as SUPPLY ONLY.
16
-
-
Description same as per item Sl No 139 above but, exhaust fan of any sweep/cap/type complete all as specified and directed.
8
-
-
Description same as per item Sl No 139 above but, wall mounted fan of any sweep/cap/type complete all as specified and directed.
6
-
-
Taking down of unsv exhaust fan of cap 300 mm sweep of any make from its existing position and rewinding by super enamelled copper winding wire of suitable gauge and size with Garware insulating paper, insulating varnish and oven drying for requisite insulation values including necessary PVC sleeves lead wires and testing after assembling in position in exhaust fan complete all as specified and as directed.
6
-
-
Taking down carefully ceiling fan of any make, size from its location, handed over to AGE E/M store yard without any damage
14
-
-
S & F BLDC 5 star rated ceiling fan metallic body ISI marked 1200 mm sweep, 220V AC, 50 Hz with all accessories alogwith providing and connecting up with 1.0 sqmm 3 core flexible copper conductor of suitable length from connector of fan to ceiling rose and testing complete all as specified and as directed by Engr In charge. Make: CG / Havells/ Orient/ Usha
7
-
-
Taking down carefully electric geysers of any make, type and capacity after disconnecting of electrical and water connections, opening of bottom cover, checking of all parts and taking out copper tank, checking of its leakage and removing the dust, brazing the leakage and painting of geysers with two coats of synthetic enamel paint, replacement of wornt out spares and reassembling the geyser and re-fixing back in its original position complete all as specified and as directed.
NOTE: Spares shall be measured and paid separately under relevant items as SUPPLY ONLY.
5
-
-
S & F high speed air ventilating fan 300 mm sweep single ph, 230 volt, steel body with louvers incl all fixing arrangement complete all as specified and directed. Make:Luker (Cat Part No LME12) or equivalent to CG / Havells/ Orient/ Usha.
3
-
-
S & F air ventilating fan 200 mm sweep single ph, 230 volt, PVC body with louvers incl all fixing arrangement complete all as specified and directed. Make: Luker (Cat Part No LXC8 or equivalent to CG / Havells/ Orient/ Usha.
4
-
-
Supply only heating element 1500 watts.
5
-
-
Supply only thermostat switch.
3
-
-
SUPPLY ONLY thermal cut out.
3
-
-
SUPPLY ONLY PVC connection 15mm size with PTMT nuts of length 600mm. Make:- Prayag/ Polytuff
7
-
-
S & F in replacement of Supply & fix motor starter switch of capacity 25 Amps working on 240 volts AC supply alongwith with 25 Amps mini MCB SP type 'C' 240 volts for air conditioner complete all as specified and directed.
8
-
-
M&L for Sub main wiring complete with two runs (1P+1N) of 6.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 6.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and including 25 mm wide rigid non-metallic PVC casing and capping and its accessories (OR) 25 mm dia PVC conduit and conduit accessories fixed in concealed or on surface of wall/ceiling/roof/ floor complete all as specified and as directed.
29
-
-
Description same as per item Sl No 153 above but sub main wiring with two runs (1P+1N) of 4.0 Sqmm single core duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire.
45
-
-
Description same as per item Sl No 153 above but sub main wiring with two runs (1P+1N) of 1.5 Sqmm single core duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire.
NOTE for Item No( 157 to 159): Two runs (1P+1N) of copper conductor, two runs of copper conductor and one run of PVC casing and capping / PVC conduit shall be measured as one unit length.
47
-
-
S & F in replacement of DB VTPN sheet metal enclosure double door IP 43 protection, door earth suitable for incoming upto MCCB 100 Amps/ 200 Amps & outgoing MCB TP / SP. Triple pole and neutral 415 V 4 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete and making good to the distrubed surface /walls all as specified and directed. Make : Indo Asian/Havells/L&T/Legrad
2
-
-
S & F in replacement of Triple pole and neutral sheet steel powder coated Distribution board IP -43 protection with door earthing for MCBs fitted with 200 Amps rated bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 415 V, 50 Hz supply double door TPN DB system 04 ways, and making good to the distrubed surface /walls complete all as specified and directed.
MAKE: INDO ASIAN / L&T/ LEGRAND/ HAVELLS.
2
-
-
S & F in replacement of MCB DB, SPN, 8-way, double door, 240 Volts with 200 Amps rated bus bar, IP-43 protection, shrouded neutral bus bar, cement spill protector, concealed in wall and making good disturbed surfaces to match with surrounding surface complete all as specified and as directed.
MAKE: INDO ASIAN / L&T/ LEGRAND/ HAVELLS
2
-
-
S & F in replacement of MCCB, 3 pole, 100 Amps, 50Hz, 25KA rupturing capacity, 415 Volts adjustable type with thermal and magnetic release complete all as specified and as directed.
MAKE: INDO ASIAN/ L&T/ LEGRAND/ HAVELLS
2
-
-
S & F in replacement of MCB, TPN, "C" series, 415 volts, 63 Amps, 10 KA rupturing capacity complete all as specified and as directed.
MAKE: INDO ASIAN / L&T/ LEGRAND/ ABB/ HAVELLS
3
-
-
S & F in replacement of MCB, TP, "C" series, 230 volts, 40-63 Amps, 10 KA rupturing capacity complete all as specified and as directed. MAKE: INDO ASIAN / L&T/ LEGRAND/ ABB/ HAVELLS
3
-
-
S & F in replacement of MCB, SPN, "C" series, 230 volts, 32 Amps, 10 KA rupturing capacity complete all as specified and as directed. MAKE: INDO ASIAN / L&T/ LEGRAND/ ABB/ HAVELLS
5
-
-
S & F in replacement of MCB, SP, "C" series, 240 volts, 6 to 32 Amps, 10 KA rupturing capacity complete all as specified and as directed.
20
-
-
S & F in replacement of 18 watts surface mounted LED light fitting , white/yellow colour as reuired as site with slim high perfomanance surfaced mounted LED light fittings, round/square shape as required at site made from die-cast aluminium and CRCA covering, powder coated in white colour complete all as specified and directed. MAKE: Luker Cat No LNPSRR18 or equivalent make of Havells/CG/Philips
NOTE: The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting
6
-
-
S & F in replacement of of LED slim panel lighting fixture of 18 Watt recess mounted 220V , 50Hz with finished in premium white powder coating ,environmental friendly energy efficient fitting recess mounted round/square in shape (Warm white/ white colour as per requirement of site complete) of light as required at site) complete all as specified and directed. Make - Luker Cat Part No : LNPR18 or equivalent make in CG/ Philips/ Havells.
13
-
-
Description all as item No 165 above but 15 watt recess mounted.
Make - Luker Cat Part No : LNPR15 or equivalent make in CG/ Philips/ Havells.
9
-
-
Description all as item No 165 above but 9 watt recess mounted.
Make - Luker Cat Part No : LNPR9 or equivalent make in CG/ Philips/ Havells. NOTE for item No 169 to 171 : The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting.
9
-
-
S & F in replacement and testing Tube light fittings LED 20 watts 4 feet including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. Make: Luker Cat Part No : LT5M20 or equivalent to CG/Philips/ Havells
53
-
-
S & F in replacement and testing Tube light fittings LED 10 watts 2 feet including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. Make: Luker Cat Part No : LT510P or equivalent to CG/Philips Havells
11
-
-
S & F in replacement of concealed cob/ spot LED light energy efficient of cap 4 watt (WH/WW/NW of colour) LED for low ceiling height applications round in shape, pressure die-cast aluminium housing, spring loaded clips for easy mounting complete all as directed. Make : Luker :- LCOB04 or equivalent to Havells /Philips /CG
6
-
-
S & F in replacement of and testing LED recessed mounted 595 mm x 595 mm luminarie with high transmitive diffuser of cap 40 watt, with longer life and less maintenance including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. Make: LUKER model No LKM 2240 of any colour (WH/NWH/WW) as reuired or equivalent to Philips/CG/ Havells . NOTE: The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting
6
-
-
S & F in replacement of LED Strip light, 60 LED per metre, 24 watts with driver, 5 metre length, of any colour (WW/NW/CDL), including all fixing arrangment as per site requirement complete all as specified and as directed. The cradle is provided for monitoring purpose all as directed. Make: Philips Model: Skycove or equivalent to CG/ Havells
3
-
-
S & F in replacement 30 watts LED building security light fittings, IP 65 luminaire, Pressure die cast aluminium housing powder coated graphite grey and toughened glass including necessary fixing arrangements as per site requirements all as specified and directed by Engr In Charge. Make : Luker Cart Part No: LSTE-30 or equivalent to Philips /Havells
5
-
-
Taking down old corroded GI bracket of 25 mm dia and supply and fixing new GI brackets of GI pipe light grade of size 25 mm dia including nuts, bolts and washers for building secufity light all as specified and directed
3
-
-
M&L for earthing complete with GI earth plate electrode of size 600mmx600mmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5m below normal ground level connected to 4mm dia GI earth wire as earth lead connected by means of bolts, nuts, washers and check nuts made out of galvanised iron or steel all as shown on electrical plate No. 3 of SSR Part-I connected to common earth dolly including testing on completion complete all as specified and directed.
NOTES: 1) The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, pre-cast RCC (1:2:4) type B-1 using 20mm graded stone aggregate cover 50mm thick reinforced with TMT bars 8mm dia @ 100mm c/c both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe light grade 40mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (notes) under sub-heading earthing, specified on Sl. Page Nos. 422 & 423 of SSR Part-II. 2) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately.
2
-
-
Repair to LED light /PTLs of any model/make/rating in position including testing of serviceability of connected accessories, and wiring upto respective switch/control unit including and replacing unserviceable items such as drivers , holder and making light functional. Note: (i) All the spares such as drivers, holder, LED tubes etc including replacing will be will measured and paid separately
(ii) The representative of the contractor shall report to Engineer-in-charge/JE on daily basis to carry out repairs to light fitting and completion report to be submitted all as specified and as directed
27
-
-
S & F in replacement of 9 Watts holder type (E22) LED lamp (E22) 230 Volts, 50Hz complete all as specified and as directed. Make :- Philips/ CG/ Havells/ Bajaj
22
-
-
S & F in replacement of 7 Watts retrofit holder type (E27) LED lamp 230 Volts, 50Hz complete all as specified and as directed. Make :- Philips/ CG/ Havells/ Bajaj
14
-
-
M&L for Repair to point wiring for light/fan/socket by cutting, removing and replacing the burnt and unserviceable wire with new FRLS cable and conduits with copper conductor 1.5/2.5 Sqmm size, jointing with same size wires, replacing the saddles, refixing the loose/hanging conduits/casing capping properly all as directed. Note:(i) Rate is inclusive for FRLS cable and other minor items (ii) The representative of the contractor shall report to Engineer-in-charge/JE on daily basis to carry out repairs and completion report to be submitted all as specified and as directed
25
-
-
M&L for taking down of unsv /damaged Casing & caping of size 25mm x12 mm from its existing location and s & f in replacement of the same alongwith connected accssories ,fixing with the wall, roof etc as specified and directed by Engr In Charge.
40
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements