Military Engineer Services Tender
To inquire about any e-tender the Andaman & Nicobar Islands government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder one can find every eprocurement Punjab tender on BidAssist. BidAassist has collated each and every Eproc Andaman & Nicobar Island Tender on its website. Looking for Andaman & Nicobar Island tenders online or going through the cumbersome government websites for it, has been made easier with the help of BidAssist.
Military Engineer Services - MES Tender
Civil And Construction
Electrical and Electronics
Pipe Line Project
Water Storage And Supply
Electrical Works
Eprocure
Opening Date6 Feb 2024
Closing Date20 Feb 2024
Tender Amount₹ 49,00,000
Costs
EMD
₹ 98,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_MES_631240_2Bid Award Id
ViewTender No
8323/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Removing excavated material to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above starting point in any type of soil complete all as specified and directed by Engineer-in-Charge.
30
-
-
Supplying, laying and fixing in replacement, GI water tubing, medium grade,ISI marked of 20mm bore confirming to IS-1239 [Part-1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, etc laid in trenches / floors or fixed to walls / ceiling / roof etc including testing complete all as specified and directed by Engineer-in-Charge.
30
-
-
All as per item No. 5.00 above but 25mm bore complete all as specified and directed by Engineer-in-Charge.
30
-
-
All as per item No.5.00 above but 40mm bore complete all as specified and directed by Engineer-in-Charge.
30
-
-
All as per item No. 5.00 above but 50mm bore complete all as specified and directed by Engineer-in-Charge.
30
-
-
All as per item No. 5.00 above but 80mm bore complete all as specified and directed by Engineer-in-Charge.
30
-
-
All as per item No. 5.00 above but 100mm bore complete all as specified and directed by Engineer-in-Charge.
30
-
-
All as per item No. 5.00 above but 150mm bore complete all as specified and directed by Engineer-in-Charge.
30
-
-
S&F in replacement 20mm bore Gun Metal, globe or gate valves ISI marked with iron wheel head screwed both ends for iron pipe complete all as specified and directed by Engineer-in-Charge.
5
-
-
All as per item No. 12.00 above but 25mm bore complete all as specified and directed by Engineer-in-Charge.
5
-
-
All as per item No.12.00 above but 40mm bore complete all as specified and directed by Engineer-in-Charge.
5
-
-
All as per item No. 12.00 above but 50mm bore complete all as specified and directed by Engineer-in-Charge.
5
-
-
All as per item No. 12.00 above but 80mm bore complete all as specified and directed by Engineer-in-Charge.
3
-
-
All as per item No. 12.00 above but 100mm bore complete all as specified and directed by Engineer-in-Charge.
2
-
-
M&L for cutting CI/DI/GI pipes 150mm bore in position for insertion of new tees, branches, etc and reducing to required length before laying complete all as specified and directed by Engineer-in-Charge.
1
-
-
All as per item No 18.00 above but 100mm bore complete all as specified and directed by Engineer-in-Charge.
1
-
-
All as per item No 18.00 above but 80mm bore complete all as specified and directed by Engineer-in-Charge.
1
-
-
All as per item No 18.00 above but 50mm bore complete all as specified and directed by Engineer-in-Charge.
3
-
-
S&F flanged Non Return Valve (NRV) suitable for 150mm bore ISI marked pipe flap type, cast iron body, ISI marked class PN 1.6, confirming to IS, provision with 3mm thick rubber gasket on both sides of the flanges, bolts and nuts complete including dismantling of unserviceable valve complete all as specified and directed by Engineer-in-Charge.
1
-
-
All as per item No 22.00 above but 100mm bore pipe complete all as specified and directed by Engineer-in-Charge.
1
-
-
All as per item No 22.00 above but 80mm bore pipe complete all as specified and directed by Engineer-in-Charge.
1
-
-
All as per item No 22.00 above but 65mm bore pipe complete all as specified and directed by Engineer-in-Charge.
1
-
-
All as per item No 22.00 above but 50mm bore pipe complete all as specified and directed by Engineer-in-Charge.
1
-
-
M&L in repair,3.15mm thick Mild steel, plain, black sheet as in covers of water tanks valve chambers, etc using Framed steel work such as grills,gratings, etc.. with ends of barsshouldered and/or riveted,or forged into spikes; framedguard bars; barred iron doors ,ladders, framed balusters; walk ways, railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge.
50
-
-
Taking down unserviceable 50mm bore sluice valves / Non Return Valve and Re-fixing the same in its original position / location with flanged ends including necessary cleaning, resetting & minor repairs for its smooth functioning, any pattern complete all as specified and directed by Engineer-in-Charge.
1
-
-
All as per item No. 28.00 above but 80mm bore complete all as specified and directed by Engineer-in-Charge.
1
-
-
All as per item No. 28.00 above but 100mm bore complete all as specified and directed by Engineer-in-Charge.
1
-
-
All as per item No. 28.00 above but 150mm bore complete all as specified and directed by Engineer-in-Charge.
1
-
-
M & L for repacking stuffing box of sluice valve 50mm bore spindle including taking apart and reassembling complete all as specified and directed by Engineer-in-Charge.:-
1
-
-
All as per item No. 32.00 above but 80mm bore complete all as specified and directed by Engineer-in-Charge.
1
-
-
All as per item No. 32.00 above but 100mm bore complete all as specified and directed by Engineer-in-Charge.
1
-
-
All as per item No. 32.00 above but 150mm bore complete all as specified and directed by Engineer-in-Charge.
1
-
-
M & L for taking out 50mm bore sluice valve, refacing, regrinding and refixing including taking apart & complete reassembling complete all as specified and directed by Engineer-in-Charge.:-
1
-
-
All as per item No. 36.00 above but 80mm bore complete all as specified and directed by Engineer-in-Charge.
1
-
-
All as per item No. 36.00 above but 100mm bore complete all as specified and directed by Engineer-in-Charge.
1
-
-
All as per item No. 36.00 above but 150mm bore complete all as specified and directed by Engineer-in-Charge.
1
-
-
M&L for detecting and repairing leakages in CI/DI/GI pipelines of size 200 mm bore, taking up unserviceable/ serviceable CI/DI water mains 250 mm / 200mm bore with spigot and socket ends (including fittings) of any type/grade and joints from trenches and laying new DI pipelines of size 250mm/ 200mm bore in trenches or placing on pillars/supports including testing on completion complete all as specified and as directed at site indlcuing the the following : -
(a) Excavation and earthwork in soil / mud by using machinery/ labour to suitable length (approx 10 metre) and forming bund with excavated soil to avoid sea / raw water entering into the working area including pumping / bailing out water by using portable diesel engine driven pumpset. (b) Cutting of CI/DI pipe of size 250mm/ 200mm bore after thorough inspection for the damaged pipeline including disconnecting / dismantling.
(c) Taking out CI/DI pipe with CI/DI specials after removing from joints / burning out joints and recovering lead at both ends with the help of Hydraulic Crane or other machinery and keeping aside for further disposal
(d) Cutting the new pipe into pieces as per requirement and laying using machinery
(e) Aligning the pipe line as per site condition, inserting the CI/DI collar suitable for 250mm / 200mm bore pipe. (f) Attending the repair work within a minimum period as specified by Engineer-in-Charge.
2
-
-
All as per item No 40.00 above but 150mm bore complete all as specified and directed by Engineer-in-Charge.
5
-
-
All as per item No 40.00 above but 100/80mm bore complete all as specified and directed by Engineer-in-Charge.
8
-
-
M&L for attending of water supply complaints for any leakage / blockage in GI pipe lines of size 20mm / 25mm bore taking up serviceable / unserviceable GI water pipe lines all fittings/fixtures from trench including supply and laying GI tubing 20mm/25mm bore up to 1 mtr length (max) including necesssary cutting, threading suitable for 20mm/25mm including necessary excavation and earth work up to 1 Cum to repair the leakage / clearing the blockage in the pipe line and testing on completion complete all as specified and directed by Engineer-in-Charge.
NOTE : Excavation more than 1 Cum and GI fittings shall be measured and paid seperately under relevent item of this schedule
65
-
-
All as per item No 43.00 above but 40mm / 50 mm bore GI pipe line complete all as specified and directed by Engineer-in-Charge.
40
-
-
Supply, laying jointing, testing in repairs DI pipe with spigot socketed ends of 80mm bore centrifugally cast, class K - 9 conforming to IS-8329 laid in trenches of the following sizes all as specified and directed by Engineer-in-Charge. Note : Joints and CI fittings shall be measured and paid separately under relevent items of this schedule.
6
-
-
All as per item No- 45.00 above here-in-before but 100 mm dia complete all as specified and directed by Engineer-in-Charge.
6
-
-
All as per item No-45.00 above here-in-before but 150 mm dia complete all as specified and directed by Engineer-in-Charge.
6
-
-
M&L for CI / DI fittings in repairs for spigot and socketed pipes of class 'A' such as bends any type, radius and angle), tapers any type (straight , bend, increasing/ decreasing or double socket, etc.,), tee pieces, single branch, 'Y ' juction, double branch, cross (all sockets or socket and spigot) collers, caps and plugs, etc., in new position with connecting pieces for pipes 150mm/200mm/250mm/350mm / 400mm bore CI/DI pipe line complete all as specified and directed by Engineer-in-Charge.
50
-
-
M&L for Joint with rubber gasket (Tyton) suitable for spigot and socket pipe and fitting of 150mm bore CI / DI pipe complete all as specified and directed by Engineer-in-Charge.
4
-
-
All as per item No 49.00 above but 100mm bore complete all as specified and directed by Engineer-in-Charge.
4
-
-
All as per item No 49.00 above but 80mm bore complete all as specified and directed by Engineer-in-Charge.
4
-
-
S&F in replacement of sluice valve ISI marked suitable for 50mm bore pipe with stainless steel spindle and iron wheel head long body class PIN 1.6 complete with rubber gaskets, nut and bolts of suitable size, ISI marked conforming to IS-14846 complete all as specified and directed by Engineer-in-Charge.
1
-
-
All as per item No 52.00 above but suitable for 80mm bore pipe complete all as specified and directed by Engineer-in-Charge.
3
-
-
All as per item No 52.00 above but suitable for 100mm bore pipe complete all as specified and directed by Engineer-in-Charge.
1
-
-
All as per item No 52.00 above but suitable for 150mm bore pipe complete all as specified and directed by Engineer-in-Charge.
1
-
-
Demolition of precast block masonry walls built in cement mortar complete all as specified and directed by Engineer-in-Charge.
2
-
-
M&L for Precast Cement Concrete solid block masonry exc 10cm in width type C1, 1:3:6 (using 20mm stone aggregate ) set in CM (1:6) for valve pit chamber etc complete all as specified and directed by Engineer-in-Charge.
2
-
-
M&L for rendering 10mm thick in CM (1:4) on fair faces of concrete internal wall surface finished even and smooth (without using extra cement) for valve pit chamer etc complete all as specified and directed by Engineer-in-Charge.
10
-
-
M&L for providing Plain Cement Concrete Type B1 1:2:4 Nominal mix (using 20mm graded aggregate ) as in coping, bedplates, valve chambers etc including formwork complete all as specified and directed by Engineer-in-Charge.
2
-
-
M&L rendering 15mm thick in CM (1:4) on fair face of concrete external wall surfaces finished even and smooth (using extra cement) for valve pit chamer etc complete all as specified and directed by Engineer-in-Charge.
10
-
-
S&F in replacement of Ball valves high pressure with Epoxy coated aluminum rod & high density plastic ball screwed for iron pipe of 40mm bore all as specified and directed by Engineer-in-Charge
10
-
-
25 mm bore
20
-
-
20 mm bore
20
-
-
S&F in replacement of Rotational moulded polyetheylene (HDPE) Water storage Tanks ISI marked of 250 liter capacity Cylindrical & Vertical Type, double layered, ISI marked, hoisted and fixed in position with PVC cover including provision of 40mm / 25mm dia spouts for connecting inlet, outlet, over flow and washout pipes complete all as specified and directed by Engineer-in-Charge.
1
-
-
All as item No. 64.00 above but 500 liter Capacity
1
-
-
All as item No. 64.00 above but 1000 liter Capacity
1
-
-
All as item No. 64.00 above but 2000 liter Capacity
1
-
-
All as item No. 64.00 above but 5000 liter Capacity
1
-
-
S&F in replacement PVC tank cover suitable for service over head tank including necessary fixing arrangements of 500/750/1000 Ltr capacity complete all as specified and directed by Engineer-in-Charge
350
-
-
M&L for painting to GI / CI water pipeline including Sluice valves, NRV etc with two coat of synthetic enamel paint of black colour / shade or approved colour duly preparing the existing painted surfaces of 80 / 100 / 150mm dia pipes all as specified and directed by the Engineer-in-Charge
110
-
-
Supply, fixing & testing in replacement Air release valve size of 80 mm dia suitable for any type/size with GI pipe of upto 1 mtr length complete all as specified and directed by Engineer-in-Charge
1
-
-
M&L for fixing in replacement Notice board 2 feet by 1 feet using half mm thick foam sheet including writing emergency contact name and Number on board , notice board shall be printed in red color only and letters are white color minimum 76 letters and maximum 90 letters and fixing with revet or screw all as specified and directed by Engineer-in-Charge.
Note : Sample copy shall be collected from site with details all as specified
1
-
-
M&L for fixing in replacement glow signage board 6 feet by 4 feet using flax including writing the name of installation as per given format and shall be printed in blue color only and letters are white color minimum 76 letters and maximum 90 letters and fixing with revet or screw all as specified and directed by Engineer-in-Charge
Note : Sample copy shall be collected from site with details all as specified
1
-
-
S & F in replacement of digital soft starter suitable for 15 HP submersible pump including all connection and additional wiring etc all as specified and directed by Engineer-in-Charge
1
-
-
S & F in replacement of star delta starter suaitable for 50 to 65 HP submersible pump including all connections and additional wiring etc all as specified and directed by Engineer-in-Charge
1
-
-
S & F in replacement of star delta starter suaitable for 10 to 15 HP submersible pump including all connections and additional wiring etc all as specified and directed by Engineer-in-Charge
1
-
-
S & F in replacement of star delta starter suaitable for 3 to 5 HP submersible pump including all connections and additional wiring etc all as specified and directed by Engineer-in-Charge
1
-
-
S&F in replacement of Gun Metal Foot valve 50 mm bore ISI marked as per existing make and model complete all as specified and directed by Engineer-in-Charge.
1
-
-
All as per item No. 78.00 above but 80 mm bore complete all as specified and directed by Engineer-in-Charge.
1
-
-
All as per item No. 78.00 above but 100mm bore complete all as specified and directed by Engineer-in-Charge.
1
-
-
S&F in replacement PVC insulated sheathed, unarmoured, flat submersible water proof with stranded copper conductor 1100 Volts grade of size 3 core 6 Sq mm complete all as specified and directed by Engineer-in-Charge.
10
-
-
S&F in replacement PVC insulated sheathed, unarmoured, flat submersible water proof with stranded copper conductor 1100volt grade of size 3 core 16 Sq mm complete all as specified and directed by Engineer-in-Charge.
10
-
-
S&F in replacement PVC insulated sheathed, unarmoured, flat submersible water proof with stranded copper conductor 1100volt grade of size 3 core 35 Sq mm complete all as specified and directed by Engineer-in-Charge.
10
-
-
S&F in replacement pump set coupling guard made out of 2mm thick CRCA sheet duly painted with one coat of red oxide primer and two coats of signal red synthetic enamelled paint and replacement of old rusted nut bolts etc complete all as specified and directed by Engineer-in-Charge.
2
-
-
M&L for disconnecting electrically and mechanically defective induction electric motor / submersible monoblock motor capacity of 15 HP electrically operated three phase 415 volt,shifting to civil workshop for repair,strip opening for inspection,cutting of unserviceable burnt winding,taking out,cleaning of slots,rewinding with new super enameled ,copper conductor winding wire and replacement of unserviceable burnt insulating materials,sleeves etc,varnishing and other connected works,re-assembling,re-fixing at site,electrical connection fixing with pump set with nuts,bolts,washers as per original position and testing complete all as directed by the Engineer-in- Charge.
1
-
-
All as per item No.85.00 above but capacity of 10 HP complete all as specified and directed by Engineer-in-Charge.
1
-
-
All as per item No.85.00 abovebut capacity of 5 to 7.5 HP complete all as specified and directed by Engineer-in-Charge.
1
-
-
All as per item No.85.00 above but capacity of 3 HP complete all as specified and directed by Engineer-in-Charge.
1
-
-
All as per item No.85.00 above but capacity of 50HP to 65 HP complete all as specified and directed by Engineer-in-Charge.
1
-
-
M&L for dismantling defective centrifugal / monoblock /submersible monoblock pump of capacity 15 HP and shifting from installation to civil work shop for repairing and replacement of following spares including transportation charges,re-assembling and re-installation at site,testing and commissioning complete all as specified and directed by Engineer-in-Charge.
(i) Impeller -01 No
(ii) Gun metal bush -01 No
(iii) Complete gasket set
(iv) Remetalling grinding polishing of shaft -01 No
(v) Gland packing -01 No
(vi) Primary cock -01 No
(vii) Nuts,bolts and washers of required size as directed
(viii) Stud -02 Nos
1
-
-
All as per item No.90.00 above but capacity of 7.5HP to 10 HP complete all as specified and directed by Engineer-in-Charge.
1
-
-
All as per item No.90.00 above but capacity of 3 HP to 5 HP complete all as specified and directed by Engineer-in-Charge.
1
-
-
All as per item No.90.00 above but capacity of 65 HP complete all as specified and directed by Engineer-in-Charge.
1
-
-
Supply and fix in replacement of rubber star coupling suitalbe for 10/15/65 HP capacity pump set complete all as specified and directed by Engineer-in-Charge.
1
-
-
Supply, fix & testing in replacement Butterfly valve ISI marked size of 150mm dia ISI marked supplied and installed with accessories complete all as specified and directed by Engineer-in-Charge.
1
-
-
Supply, fix & testing in replacement Butterfly valve ISI marked size of 100mm dia supplied and installed with accessories complete all as specified and directed by Engineer-in-Charge.
1
-
-
Supply, fix & testing in replacement Butterfly valve ISI marked size of 80mm dia supplied and installed with accessories complete all as specified and directed by Engineer-in-Charge.
1
-
-
Supply, fix & testing in replacement Butterfly valve ISI marked size of 65mm dia supplied and installed with accessories complete all as specified and directed by Engineer-in-Charge.
1
-
-
Supply, fix & testing in replacement Butterfly valve ISI marked size of 50mm dia supplied and installed with accessories complete all as specified and directed by Engineer-in-Charge.
1
-
-
Supply and fix GI Flange of 50mm bore with suitable size nuts and bolts complete all as specified and directed by Engineer-in-Charge.
1
-
-
Supply and fix GI Flange of 80mm bore with suitable size nuts and bolts complete all as specified and directed by Engineer-in-Charge.
1
-
-
Supply and fix GI Flange of 100mm bore with suitable size nuts and bolts complete all as specified and directed by Engineer-in-Charge.
1
-
-
Supply and fix GI Flange of 150mm bore with suitable size nuts and bolts complete all as specified and directed by Engineer-in-Charge.
1
-
-
Supply and fix GI tank nipple of 25/40mm bore complete all as specified and directed by Engineer-in-Charge.
1
-
-
Material and labour for making header of 150mm bore GI pipe with making provision for multiple outputs of 80mm bore GI pipe with sluice valves making PCC platform of sutable size including nuts bolts washer, cuting of pipe,gasket, welding, flange joints all as required at site and as directed by Engineer-in-Charge.
Note :- GI tube 150mm bore, 80mm bore, sluice valve and PCC will be measured seperately under relevant items of the schedule.
1
-
-
M&L for Cleaning of RCC Semi underground dranage sump of appx size 50mX 40m and depth appx 6m situated by emptying the reservoirs, taking down the scale / sludge /mud / algae formed by JCB or manually including and other foreign materials got deposited on side of walls and bottom of the tanks by scrapping and brushing with wire brush, cleaning with pressure pump, washing with bleaching powder slurry and allowing to dry and then washing and cleaning the tank with fresh water including applying t coat of white wash on internal surface of reservoirs/sumps and written details on tanks like date of cleaning, capacity of tanks etc on the out side of the tank with synthetic enamel paint with letter size 20cm high, 10cm width in white colour, over a black background of size 120 x 80cm all as specified and directed by Engineer-in-Charge.
1
-
-
Taking down carefully copper/aluminium point wiring (light, Fan, Socket or power) complete, fitting such as switches ceiling roses, pendants, regulators, Sockets etc and making good disturbed surface to match with existing finish with plaster and applying white / colour wash / OBD / CBP as per existing at site as required of walls, floors roofs etc all as specified and directed by Engineer-in-Charge.
274
-
-
M&L for point wiring with Insulated unsheathed Cable 1.5 Sqmm multistranded FRLSH copper conductor 1100 Volt grade IS-694 and drawing in and including concealed steel conduit stove enamelled medium grade suitable dia with fixing materials, sunken terminal MS boxes of 2mm thick, 3mm laminated sheet cover and including provision of earth wire PVC insulated unsheathed 1.5 Sqmm stranded FRLSH copper conductor single core cable connected to common earth dolly along wall/roof including making good disturbed surface to match with existing finish with plaster and applying white / colour wash / OBD / CBP as per existing at site all as directed and specified by Engr in charge for the following:-
-
-
-
One light/fan controlled by 5/6 Amp one way switch
10
-
-
One 3 pin socket out let 5/6 Amps on the same board
3
-
-
One 3 pin socket out let 5/6 Amps on the Independent board
5
-
-
One bell/buzzer point controlled by one push button on the Independent board
2
-
-
All as per item No.108.00 above but with 2.5 Sqmm single core multi stranded FRLSH copper conductor for one three pin socket 15 Amps on independent board including continuous earth wire PVC insulated 2.5 Sqmm FRLSH copper solid conductor to common earth dolly all as specified and directed by Engineer-in-Charge.
2
-
-
All as per item No.108.00 above but but with 4 Sqmm single core multi stranded FRLSH copper conductor for one three pin socket 20 amps on independent board/ metal clad socket for AC point including continuous earth wire PVC insulated multi stranded FRLSH 4 Sqmm copper solid conductor to common earth dolly all as specified and directed by Engineer-in-Charge.
2
-
-
M&L point wiring with 1.5 Sqmm (nominal area) PVC unsheathed multi stranded FRLSH copper conductor PVC insulated 1100 volt FRLS grade multi stranded cable drawn through and including PVC casing caping/conduit ISI marked minimum 20mm size and its accessories complete along with 1.5 Sqmm cable but in green colour as continuous earthing wire and connecting to common earth dolly completely concealed ,surface, in walls/ceiling/roofs with and including 1.2 mm thick MS sheet terminal boxes duly fabricated flush mounting in the wall for mounting switches, switch socket combinations fan regulators etc., as required with 3 mm thick plastic laminated sheet top cover all as directed and specified by Engr in charge for the following.
-
-
-
One light /fan/bell point controlled by one switch.
120
-
-
One 5 Amps plug point independent board controlled by one switch.
40
-
-
One three pin switch socket 5 Amps plug point on same board.
55
-
-
All as per item No.115.00 above but with 2.5 Sqmm single core multi standard copper conductor for one three pin socket 5 Amps on independent board including continuous earth wire PVC insulated 2.5 Sqmm copper solid conductor to common earth dolly all as specified and directed by Engineer-in-Charge.
25
-
-
All as per item No.115.00 above but with 4 Sqmm single core multi standard copper conductor for one three pin socket 15 Amps on independent board/ metal clad socket for AC point including continuous earth wire PVC insulated 4 Sqmm copper solid conductor to common earth dolly all as specified and directed by Engineer-in-Charge.
10
-
-
Supply and fixing switch piano, flush button type, single pole, one way 15/16 amps complete all as specified and directed by Engineer-in-Charge.
27
-
-
Supply and fixing socket outlet 2-in-1, 3 pin, 5 and 15 amps, flush type complete all as specified and directed by Engineer-in-Charge.
27
-
-
Supply and fixing bell push 5 Amps for electric Bell/Buzzer, ding dong AC 230 Volt single pole complete all as specified and directed by Engineer-in-Charge.
2
-
-
Supply and fixing electric Bell, ding dong type AC 230 Volt single pole complete all as specified and directed by Engineer-in-Charge.
2
-
-
supply and fix Switch Piano flush button type, single pole, one way 5 Amp all as specified and directed by Engineer-in-Charge.
120
-
-
Supply and fixing socket piano flush type 2-in-1 2/3 pin 5 Amps all as specified and directed.
103
-
-
Supply and fixing sheet metal enclosure with socket plug top , single pole and neutral enclosure with two pin earth plug and socket complete with one MCB SP of capacity 20 to 32 Amps complete all as specified and directed.
12
-
-
Supply and fixing of ceiling rose, surface bakelite 65 mm x 30 mm, 3 terminals all as specified and directed by Engineer-in-Charge.
130
-
-
Supply and fixing of Electronic dimmer type regulator 230 Volt step type all as specified and directed by Engineer-in-Charge.
25
-
-
Supply and fixing of Switch socket combination 06 Amps all as specified and directed by Engineer-in-Charge.
25
-
-
Supply and fixing of Switch socket combination 15 Amps all as specified and directed by Engineer-in-Charge.
25
-
-
M&L for Sub main wiring complete with 2x1.5 sqmm, single core, multi stranded copper conductor FRLSH PVC insulated and sheathed cable 1100 Volts grade, drawn in PVC Casing Capping in surface /PVC conduit on surface (as required) along walls roofs etc including 1.5 sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly including taking down old unsv sub main wiring all as specified and directed by Engineer-in-Charge. Note for Item No. 121 to 132 :-
(i) All three wire/cable(phase, neutral and earth) should be run through for each individual circuit from the DBs. (ii) Two run / four runs of cable and one run / two runs of earth conductor and PVC Conduit be measured as one length.
215
-
-
All as per item No.132.00 above but 2X2.5 Sqmm and 1X 2.5 Sqmm for Earth wire all as specified and directed by Engineer-in-Charge.
185
-
-
All as per item No.132.00 above but 2X4 Sqmm and 1X 4 Sqmm for Earth wire all as specified and directed by Engineer-in-Charge.
150
-
-
All as per item No.132.00 above but 2X 6 Sqmm and 1X 6 Sqmm for Earth wire all as specified and directed by Engineer-in-Charge.
125
-
-
All as per item No.132.00 above but 2X10 Sqmm and 1X 10 Sqmm for Earth wire all as specified and directed by Engineer-in-Charge.
50
-
-
Supply and fixing in replacement of PVC Gang box with 15/16 Amp multipurpose Switch and Socket all as specified and directed by Engineer-in-Charge.
10
-
-
Supply and fixing in replacement of PVC Gang box with 5/6 Amp multipurpose Switch and Socket complete all as specified and directed by Engineer-in-Charge.
15
-
-
Supply and fixing in replacement of Cast Iron/Pressed steel terminal boxes 60 mm deep 250mm by 300mm , 3mm thick rectangular with plastic laminated sheet cover all as specified and directed by Engineer-in-Charge.
4
-
-
All as per Item No.139.00 above but for 200X150mm size all as specified and directed by Engineer-in-Charge.
2
-
-
All as per Item No.139.00 above but for 175X100mm size all as specified and directed by Engineer-in-Charge.
2
-
-
supply and fix in replacement MCB DP 63 Amps, 240 Volts, 10 kA, 'C' Curve all as specified and directed by Engineer-in-Charge.
10
-
-
supply and fix in replacement MCB DP 32 Amps, 240 Volts, 10 kA, 'C' Curve all as specified and directed by Engineer-in-Charge.
12
-
-
supply and fix in replacement MCB DP 40 Amps, 240 Volts, 10 kA, 'C' Curve all as specified and directed by Engineer-in-Charge.
15
-
-
supply and fix in replacement MCB TP 40 to 63 Amps, 240 Volts, 10 kA, 'C' Curve complete all as specified and directed by Engineer-in-Charge.
5
-
-
supply and fixing in replacement of double door DB SPN 4 way IP 43-IK-09 with metal double door suitable for housing of MCBs complete all as specified and directed by Engineer-in-Charge.
4
-
-
supply and fixing in replacement of double door DB SPN 12 way IP 43-IK-09 with metal double door suitabl for housing of MCBs complete all as directed.
2
-
-
supply and fixing in replacement of double door DB SPN 8way IP 43-IK-09 with metal double door suitabl for housing of MCBs complete all as directed. Make -Legrand Cat Part No -607712
3
-
-
supply and fixing in replacement of double door Flame proof DB SPN 8way IP 43-IK-09 with metal double door suitable for housing of MCBs complete all as specified and directed by Engineer-in-Charge.
2
-
-
supply and fixing in replacement of MCB TPN 6 to 32 Amps, 440 Volts, 10 KA, 'C' Curve complete all as specified and directed by Engineer-in-Charge.
5
-
-
supply and fixing in replacement of MCB TPN 40 to 63 Amps, 440 Volts, 10 KA, 'C' Curve complete all as specified and directed by Engineer-in-Charge.
20
-
-
supply and fixing in replacement of MCB SP 6 to 32 Amps, 440 Volts, 10 KA, 'C' Curve complete all as specified and directed by Engineer-in-Charge.
80
-
-
supply and fixing in replacement of MCB SP 40 to 63 Amps, 440 Volts, 10 KA, 'C' Curve complete all as specified and directed by Engineer-in-Charge.
10
-
-
M&L Painting of ceiling fans 1200/1400mm sweep with two coats of synthetic enamel paint by means of suitable spary gun after cleaning and prepairing the surfaces and marking the circular ring line 3 mm thick line with golden colour on bottom centre complete all as specified and directed by Engineer-in-Charge.
120
-
-
All as per item No.154.00 above but exhaust fan 300/450/600mm sweep complete all as specified and directed by Engineer-in-Charge.
20
-
-
All as per item No. 154.00 above but wall/padestal fan 300/450/600mm sweep complete all as specified and directed by Engineer-in-Charge.
10
-
-
S&F in replacement Exhaust fan single phase 1400 RPM 12'' sweep heavy duty complete with louver shutter and incl fixing water proof ply wood 12 mm thick of size 350X350mm for fan base after cutting 300 mm dia of suitable size complete all as specified and directed by Engineer-in-Charge.
Note: Old unserviceable ceiling fan shall be deposited to AGE E/ M-I Store yard.
4
-
-
All as per Ser Item No.157.00 above but 450 mm sweep 900 RPM complete all as specified and directed by Engineer-in-Charge.
Note: Old unserviceable ceiling fan shall be deposited to AGE E/ M-I Store yard.
4
-
-
All as per Ser Item No 157.00 above but 600 mm sweep 900 RPM complete all as specified and directed by Engineer-in-Charge.
Note: Old unserviceable ceiling fan shall be deposited to AGE E/ M-I Store yard.
3
-
-
S&F in replacement ventilating (Wall/ air circulator) fan 250 mm sweep 230Volts AC with sturdy blades fully plastic body complete sound proof including fixing water proof ply wood 12 mm thick of size 300x300 mm for fan base after cutting 250 mm dia of suitable size complete all as specified and directed by Engineer-in-Charge.
Note: Old unserviceable ceiling fan shall be deposited to AGE E/ M-I Store yard.
9
-
-
S&F in replacement single phase, 230 volts, 50 Hz, wall mounted fan, 400 mm sweep fixed on wall with fan clamp/hook, connecting electrically complete all as specified and directed by Engineer-in-Charge.
Note: Old unserviceable ceiling fan shall be deposited to AGE E/ M-I Store yard.
9
-
-
S&F in repairs energy efficient ceiling fan 1200mm sweep, BLDC (Brushless Direct Current) motor, single phase 230/240v with necessary fittings and connections including 5KV SPD (Surge protection device) complete all as specified and as directed by Engineer-in-Charge
Make : Havells Model No : Effeciencia Prime
Note: Old unserviceable ceiling fan shall be deposited to AGE E/ M-I Store yard.
21
-
-
S&F in replacement of Pedestal Fan of 450mm sweep single phase AC 230 volts Energy saving complete as per manufacturer specification complete all as specified and directed by Engineer-in-Charge.
Note :- old unservicable exhaust fan shall be deposited in AGE E/M-I store yard.
3
-
-
S&F in replacement of Bracket assembly of various sizes as required for hanging ceiling fan with rubber shackle nuts, bolts and split pin complete all as specified and directed by Engineer-in-Charge.
50
-
-
S&F in replacement condenser 2.5 mfd including fixing of clamps with screws, sleeves etc complete all as specified and directed by Engineer-in-Charge.
100
-
-
All as per item No.165.00 above but 3.15 mfd complete all as specified and directed by Engineer-in-Charge.
20
-
-
All as per item No.165.00 above but 4 mfd complete all as specified and directed by Engineer-in-Charge.
10
-
-
supply and fix in replacement ceiling fan blades as per existing pattern (set of three) of size 1200/1400 sweep complete all as specified and directed by Engineer-in-Charge.
20
-
-
supply and fix in replacement Fan regulator step type electronic 250 volt AC complete all as specified and directed by Engineer-in-Charge.
50
-
-
supply and fix in replacement down rod of ceiling fan made upto 1m long MS pipe medium grade including two coats of synthetic enamel paint over a coat of red oxide primer with bolts/check nuts, washers etc as per existing size and shape of fans incl New U hook with rubber reel with nut bolt and washer including drilling, threading complete all as specified and directed by Engineer-in-Charge.
25
-
-
supply and fix in replacement of canopy (set of two) for ceiling fans 1200 mm/1400 mm sweep complete all as specified and directed by Engineer-in-Charge.
80
-
-
supply and fix in replacement ceiling fan bottom cover suitable for 1200/1400 mm sweep with existing make and model complete all as specified and directed by Engineer-in-Charge.
40
-
-
supply and fix in replacement ceiling fan Top cover suitable for 1200/1400 mm sweep with existing make and model complete all as specified and directed by Engineer-in-Charge.
40
-
-
supply and fix in replacement exhaust fan blade as per existing make and model of size 300 mm sweep complete all as specified and directed by Engineer-in-Charge.
20
-
-
All as per ser item No.174.00 above but 450 mm sweep complete all as specified and directed by Engineer-in-Charge.
12
-
-
All as per ser item No.174.00 above but 600 mm sweep complete all as specified and directed by Engineer-in-Charge.
5
-
-
supply and fix in replacement wall fan blade as per existing make and model of 300 mm/450 mm sweep complete all as specified and directed by Engineer-in-Charge.
8
-
-
All as per ser item No.177.00 above but 600 mm sweep complete all as specified and directed by Engineer-in-Charge.
6
-
-
supply and fix in replacement in replacement of Air circulator Fan 600 mm sweep single phase AC Energy saving complete all as specified and directed by Engineer-in-Charge.
Note: Old fan shall be deposited to AGE EM store yard.
2
-
-
S & F in replacement GI earth continuity conductor or main earthing lead of size 32X6 mm fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for earthing etc complete all as specified and directed by Engineer-in-Charge.
110
-
-
S & F in replacement GI earth continuity conductor or main earthing lead of size 25X4 mm fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for earthing etc. as required complete all as specified and directed by Engineer-in-Charge.
100
-
-
Supply and fixing in replacement of security light fitting LED type, 20 Watts 240 Volts luminous shall be more than 2000 lumen, efficiency not less than 100 lm/Watt , and accessories complete mounted on 25 mm dia light grade GI pipe bracket 1.0m long bent to shape, mounted on wall,connection complete including taking down old unserviceable CFL/tube light security light fitting complete all as specified and directed by Engineer-in-Charge.
20
-
-
Supply and fixing in replacement of 1x 20 W tube rod LED suitable for 1x 20W flame proof tube light fittings complete all as specified and directed by Engineer-in-Charge.
25
-
-
Supply and fixing in replacement of 1x 18 W tube rod LED suitable for 1x 18W tube light fittings complete all as specified and directed by Engineer-in-Charge.
25
-
-
Supply and fixing in replacement of 1x 10 W tube rod LED suitable for 1x 10W tube light fittings complete all as specified and directed by Engineer-in-Charge.
25
-
-
Supply and fixing in replacement electronic driver 24/33W suitable for 24/33 W LED light fittings complete all as specified and directed by Engineer-in-Charge.
20
-
-
supply and fixing in replacement electronic driver 15/18W suitable for 15/18 W LED light fittings complete all as specified and directed by Engineer-in-Charge.
25
-
-
supply and fixing in replacement electronic driver 9/12W suitable for 9/12 W LED light fittings complete all as specified and directed by Engineer-in-Charge.
25
-
-
S&F in replacement LED tube light fitting, 1x18 w, 230v. Surface and wall mounted LED batten, 2100lm PC Body tube housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver. & connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge.
80
-
-
S & F in replacement of LED tube light fitting, 1x20 w, 230v .Surface and wall mounted LED batten, elegant dia cast for designer homes bright LED source with uniform light out put , 2400 lm , surge protection of 2 KV with wide voltage protection 160-360 V in provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver. & connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge.
50
-
-
S & F in replacement of LED tube light fitting, 1x23 w, 230v .Surface and wall mounted LED batten, elegant dia cast aluminium batten for designer homes bright LED source with uniform light out put , 2400 lm , surge protection of 2 KV with wide voltage protection 160-360 V in provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver. & connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge.
35
-
-
S & F in replacement LED light fitting, mirror light 1x10 w, 230v fitted on wall/surface complete all as specified and directed by Engineer-in-Charge.
30
-
-
S & F in replacement LED light fitting, 1x33w, 230v .2x2 recessed mounted genaral purpose squre shaped luminaire with high transmitivity diffuser suitable for office application with profiled & flat diffuser fiited on ceiling connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge.
31
-
-
S & F in replacement LED light fitting, 1x12w, 230v .down light recessed mounted genaral purpose squre/round shaped luminaire with high transmitivity diffuser suitable for office application with profiled & flat diffuser fiited on ceiling connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge.
30
-
-
S&F in replacement fan regulator 120watt, 2 module modular type as per existing make and model complete all as specified and directed by Engineer-in-Charge.
15
-
-
supply and fixing in replacement LED tube light fitting. flameproof type FLP-WP of T5 2x36W including integral reflector made of alluminium alloy LM6, with electronic ballast, bipin holders, connector block, etc., and all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor complete all as specified and directed by Engineer-in-Charge.
2
-
-
supply and fixing in replacement LED tube light fitting. flameproof type FLP-WP of T5 1X36 W including integral reflector made of alluminium alloy LM6, with electronic ballast, bipin holders, connector block, etc., and all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor complete all as specified and directed by Engineer-in-Charge.
2
-
-
supply and fixing in replacement flameproof Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed by Engineer-in-Charge.
5
-
-
supply and fixing in replacement flame proof Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A,250V, 2P+earth complete all as specified and directed by Engineer-in-Charge.
5
-
-
Supply and laying in replacement of alluminium sevice wire 6sqmm 2 core 1100 volts grade fixed on wall/roof etc complete all as specified and directed by Engineer-in-Charge.
45
-
-
supply and fixing in replacement LED lamp, B 22, 9W 220V 50HZ complete all as specified and directed by Engineer-in-Charge.
20
-
-
supply and fixing in replacement LED lamp, B 22, 12W 220V 50HZ complete all as specified and directed by Engineer-in-Charge.
25
-
-
supply and fixing in replacement Modular switch 1 way 6A, 220V 50Hz 1module as per existing make and model complete all as specified and directed by Engineer-in-Charge.
25
-
-
supply and fixing in replacement Modular switch 1 way 16A, 220V 50Hz 1module as per existing make and model complete all as specified and directed by Engineer-in-Charge.
25
-
-
supply and fixing in replacement Modular switch 2 way 6A, 220V 50Hz 1module as per existing make and model complete all as specified and directed by Engineer-in-Charge.
25
-
-
supply and fixing in replacement Modular bell push 6A, 220V 50Hz 1module as per existing make and model complete all as specified and directed by Engineer-in-Charge.
10
-
-
supply and fixing in replacement Modular Socket, 6A - 2/3 pin combined ,220V 50Hz 2module as per existing make and model complete all as specified and directed by Engineer-in-Charge.
25
-
-
supply and fixing in replacement Modular Socket, 16A - 2/3 pin combined ,220V 50Hz 2module as per existing make and model complete all as specified and directed by Engineer-in-Charge.
30
-
-
supply and fixing in replacement Modular Fan step regulator, 120W - 1/2 module ,220V 50Hz as per existing make and model complete all as specified and directed by Engineer-in-Charge.
25
-
-
supply and fixing in replacement White cover plate with frame,1 module as per existing make and model complete all as directed at site.
10
-
-
supply and fixing in replacement White cover plate with frame,2 module as per existing make and model complete all as specified and directed by Engineer-in-Charge.
10
-
-
supply and fixing in replacement White cover plate with frame,3 module as per existing make and model complete all as specified and directed by Engineer-in-Charge.
10
-
-
supply and fixing in replacement White cover plate with frame,4 module as per existing make and model complete all as specified and directed by Engineer-in-Charge.
10
-
-
supply and fixing in replacement White cover plate with frame,6 module as per existing make and model complete all as specified and directed by Engineer-in-Charge.
10
-
-
supply and fixing in replacement metal flux box 1/2 module as per existing make and model complete all as specified and directed by Engineer-in-Charge.
10
-
-
supply and fixing in replacement metal flux box 4 module as per existing make and model complete all as specified and directed by Engineer-in-Charge.
10
-
-
supply and fixing in replacement metal flux box 6 module as per existing make and model complete all as specified and directed by Engineer-in-Charge.
10
-
-
supply and fixing in replacement Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings as per existing make and model complete all as specified and directed by Engineer-in-Charge.
24
-
-
Collection of complaint slip by contractor's representatives related to Internal Electric supply of buildings from Utrkosh complaint cell of AGE EM-II and handover to groups consisting of one electrician and one helper in each group and handover the same to the complaint cells after rectification of the complaint by respective group of electrician and helper. Note:- (i) The complaint slip will be taken over by authorised supervisor of the contractor from concern complaint cells.(ii) After rectification Electrical complain Electrician should endorsed signature mentioned with full name and mobile No from user for further verification.
(iii) Rep of department will endorse the complaint of the complaint slip to be collected.(iv) Blank complaint slips shall be provided by contractor.(v) Complaints to be rectified within 24 hour after receiving the complaint slip. Failing which, penalty of Rs 300 shall be deducted from contractor.
(vi) All electrical materials to be used for rectification of complaints shall be measured and paid separately under relevant "Supply only" item of this schedule.(vii) If any complaints is not rectified due to any justified reason, then the complaint slip shall be returned to the department with proper justification.(viii) Pls note that no manpower are being procured vide this item, only services to be provided by the contractor. Carrying out following nature of petty repair works as mentioned below;- (i) Attending day to day routine complaints in a prompt and satisfactory manner. (ii) (iii) Ensuring that no breakdown in electric distribution supply takes place, in case it happens to take all required steps including intimation to JE E/M for earliest restoration. (iv) Checking & Rectification of faulty circuit of minor nature of light/fan/bell point, socket/power socket, fans regulators, submain wiring, MCB DB's etc.
2000
-
-
(v) Checking and ensuring all the MCB's/Control Switches are working properly and distribution boxes related to complaint properly. Fault detection and rectification in cables, conduit wiring and all other electrical works including replacement of defective components/accessories such as switches, sockets, regulators, holders, call bells, light fittings, LED lamps, MCB's etc. (vi) Carrying out minor additions and alterations as directed by Engr in Charge. (vii) Hanging/Taking down of Ceiling Fans including minor repair as and when directed. (viii) Checking dirty light fitting and making schedule programme for weekend cleaning and repair.(ix) Inspection of Electrical wiring / Bldg Panels / MCB DB's / TPN / SPN for Any loose / improper connection / Improper rating of switch/MCB's / Cleanliness (x) Checking the result of Earth Resistance and recorded where as directed. (xi) All Electrical repair works should be carried out as per Indian Electricity Rules (xii) Conducting insulation test and maintenance of cables/wires etc where as directed. (xiii) Any other routine/preventive maintenance of E/M services as directed by Engineer-in-Charge.
-
-
-
Notes: - Rates quoted by the contractor shall be deemed to include the following :-
1. One MOBILE PHONE (without camera) should also be provided by contractor to the each trademan engaged by him with incoming & out going facilities for normal and after working hours also so as to contact him in case of emergency during the entire period covered under the contract to keep liaison / communication with MES staff. A penalty of Rs 60.00 Per staff/day shall be recovered in case of absence of Mobile with any trademen. 3. In case of requirement, any other materials not included in Schedule 'A' is required at site to maintain the E/M services, it will be then issued by department free of cost for incorporation. Labour cost of repair/replacement of such items is deemed to be included in unit rates quoted. 4. Any accident/mishapenning occurred during the execution of work shall be responsibity of Contractor.5. All necessary safety equipments, precautions, tools & plants i.e. multimeter, tong tester, spanner set, wrench, screw driver set, testing lamp set, drilling machine, bomboo ladder, blower/vacumm cleaner, crimping tool, cutting and chasing tool, insulation megger etc. will have to kept by each trademan engaged by contractor at his own cost. 6. Old unserviceable material retrieved shall be accounted in Schedule of credit against Contractor.
-
-
-
Supply only for carrying out repairs under item No.219.00 above with 1.5 Sqmm (nominal area) PVC unsheathed multi stranded FRLSH copper conductor PVC insulated 1100 volt FRLSH grade multi stranded cable all as directed and specified by Engr in Charge.
850
-
-
Supply only for carrying out repairs under item No.219.00 above with 2.5 Sqmm (nominal area) PVC unsheathed multi stranded FRLSH copper conductor PVC insulated 1100 volt FRLSH grade multi stranded cable all as directed and specified by Engr in Charge.
250
-
-
Supply only for carrying out repairs under item No.219.00 above with 4 Sqmm (nominal area) PVC unsheathed multi stranded FRLSH copper conductor PVC insulated 1100 volt FRLSH grade multi stranded cable all as directed and specified by Engr in Charge.
210
-
-
Supply only for carrying out repairs under item No.219.00 above with 6 Sqmm (nominal area) PVC unsheathed multi stranded FRLSH copper conductor PVC insulated 1100 volt FRLSH grade multi stranded cable all as directed and specified by Engr in Charge.
149
-
-
Supply only for carrying out repairs under item No.219.00 above with 10 Sqmm (nominal area) PVC unsheathed multi stranded FRLSH copper conductor PVC insulated 1100 volt FRLSH grade multi stranded cable all as directed and specified by Engr in Charge.
60
-
-
Supply only for carrying out repairs under item No.219.00 above with of switch piano, flush button type, single pole, one way 15/16 amps complete all as directed and specified by Engr in Charge.
50
-
-
Supply only for carrying out repairs under item No.219.00 above with of socket outlet 2-in-1, 3 pin, 5 and 15 amps, flush type complete all as specified and directed by Engineer-in-Charge.
50
-
-
Supply only for carrying out repairs under item No.219.00 above with of bell push 5/6 Amps for electric Bell/Buzzer, ding dong AC 230 Volt single pole complete all as specified and directed by Engineer-in-Charge.
5
-
-
Supply only for carrying out repairs under item No.219.00 above with of electric Bell, ding dong type AC 230 Volt single pole complete all as specified and directed by Engineer-in-Charge.
3
-
-
Supply only for carrying out repairs under item No.219.00 above with in replacement Switch Piano flush button type, single pole, one way 5 Amp complete all as specified and directed by Engineer-in-Charge.
100
-
-
Supply only for carrying out repairs under item No.219.00 above with of socket piano flush type 2-in-1 2/3 pin 5/6 Amps complete all as specified and directed by Engineer-in-Charge.
210
-
-
Supply only for carrying out repairs under item No.219.00 above with of sheet metal enclosure with socket plug top , single pole and neutral enclosure with two pin earth plug and socket complete with one MCB SP of capacity 20 to 32 Amps complete all as specified and directed by Engineer-in-Charge.
10
-
-
Supply only for carrying out repairs under item No.219.00 above with of ceiling rose, surface bakelite 65 mm x 30 mm, 3 terminals complete all as specified and directed by Engineer-in-Charge.
250
-
-
Supply only for carrying out repairs under item No.219.00 above with of Electronic dimmer type regulator 230 Volt step type complete all as specified and directed by Engineer-in-Charge.
30
-
-
Supply only for carrying out repairs under item No.219.00 above with of Switch socket combination 06 Amps complete all as specified and directed by Engineer-in-Charge.
25
-
-
Supply only for carrying out repairs under item No.219.00 above with of Switch socket combination 15 Amps complete all as specified and directed by Engineer-in-Charge.
25
-
-
Supply only for carrying out repairs under item No.219.00 above with of PVC Gang box with 15 Amp multipurpose Switch and Socket complete all as specified and directed by Engineer-in-Charge.
10
-
-
Supply only for carrying out repairs under item No.219.00 above with of PVC Gang box with 5 Amp multipurpose Switch and Socket complete all as specified and directed by Engineer-in-Charge.
9
-
-
Supply only for carrying out repairs under item No.219.00 above with of Cast Iron/pressed steel terminal boxes 60 mm deep 250mm by 300mm , 3mm thick rectangular with plastic laminated sheet cover complete all as specified and directed by Engineer-in-Charge.
2
-
-
All as per Item No. 240.00 above but for 200X150mm size complete all as specified and directed by Engineer-in-Charge.
2
-
-
All as per Item No. 240.00 above but for 175X100mm size complete all as specified and directed by Engineer-in-Charge.
2
-
-
Supply only for carrying out repairs under item No.219.00 above with in replacement MCB DP 63 Amps, 240 Volts, 10 KA, 'C' Curve complete all as specified and directed by Engineer-in-Charge.
20
-
-
Supply only for carrying out repairs under item No.219.00 above with in replacement MCB DP 32 Amps, 240 Volts, 10 KA, 'C' Curve complete all as specified and directed by Engineer-in-Charge.
20
-
-
Supply only for carrying out repairs under item No.219.00 above with in replacement MCB DP 40 Amps, 240 Volts, 10 KA, 'C' Curve complete all as specified and directed by Engineer-in-Charge.
15
-
-
Supply only for carrying out repairs under item No.219.00 above with in replacement MCB TP 40 to 63 Amps, 240 Volts, 10 KA, 'C' Curve complete all as specified and directed by Engineer-in-Charge.
5
-
-
Supply only for carrying out repairs under item No.219.00 above with of double door DB SPN 4 way IP 43-IK-09 with metal double door suitable for housing of MCBs complete all as specified and directed by Engineer-in-Charge.
6
-
-
Supply only for carrying out repairs under item No.219.00 above with of double door DB SPN 12 way IP 43-IK-09 with metal double door suitabl for housing of MCBs complete all as specified and directed by Engineer-in-Charge.
4
-
-
Supply only for carrying out repairs under item No.219.00 above with of double door DB SPN 8way IP 43-IK-09 with metal double door suitabl for housing of MCBs complete all as specified and directed by Engineer-in-Charge. Make -Legrand Cat Part No -607712
6
-
-
Supply only for carrying out repairs under item No.219.00 above with of double door Flame proof DB SPN 8way IP 43-IK-09 with metal double door suitabl for housing of MCBs complete all as specified and directed by Engineer-in-Charge.
1
-
-
Supply only for carrying out repairs under item No.219.00 above with of MCB TPN 6 to 32 Amps, 440 Volts, 10 kA, 'C' Curve complete all as specified and directed by Engineer-in-Charge.
15
-
-
Supply only for carrying out repairs under item No.219.00 above with of MCB TPN 40 to 63 Amps, 440 Volts, 10 kA, 'C' Curve complete all as specified and directed by Engineer-in-Charge.
20
-
-
Supply only for carrying out repairs under item No.219.00 above with of MCB SP 6 to 32 Amps, 440 Volts, 10 kA, 'C' Curve complete all as specified and directed by Engineer-in-Charge.
45
-
-
Supply only for carrying out repairs under item No.219.00 above with for carrying out repairs under item No.253 above with of MCB SP 40 to 63 Amps, 440 Volts, 10 kA, 'C' Curve complete all as specified and directed by Engineer-in-Charge.
25
-
-
Supply only for carrying out repairs under item No.219.00 above with condenser 2.5 mfd including fixing of clamps with screws, sleeves etc complete all as specified and directed by Engineer-in-Charge.
125
-
-
All as per item No. 255.00 above but 3.15 mfd complete all as specified and directed by Engineer-in-Charge.
20
-
-
All as per item No. 255.00 above but 4 mfd complete all as specified and directed by Engineer-in-Charge.
10
-
-
Supply only for carrying out repairs under item No.219.00 above with Fan regulator step type electronic 250 volt AC complete all as specified and directed by Engineer-in-Charge.
50
-
-
Supply only for carrying out repairs under item No.219.00 above with of security light fitting LED type, 20 Watts 240 Volts luminous shall be more than 2000 lumen, efficiency not less than 100 lm/Watt, and accessories complete mounted on 25 mm dia light grade GI pipe bracket 1.0 mtr long bent to shape, mounted on wall,connection complete including taking down old unserviceable tube light security light fitting complete all as specified and directed by Engineer-in-Charge.
40
-
-
Supply only for carrying out repairs under item No.219.00 above with of 1x 20 W tube rod LED suitable for flameproof 1x 20W fittings complete all as specified and directed by Engineer-in-Charge.
20
-
-
Supply only for carrying out repairs under item No.219.00 above with of 1x 18 W tube rod LED suitable for 1x 18W fittings complete all as specified and directed by Engineer-in-Charge.
20
-
-
Supply only for carrying out repairs under item No.219.00 above with of 1x 10 W tube rod LED suitable for 1x 10W fittings complete all as specified and directed by Engineer-in-Charge.
20
-
-
Supply only for carrying out repairs under item No.219.00 above with electronic driver 24/33W suitable for 24/33 W LED light fittings complete all as specified and directed by Engineer-in-Charge.
20
-
-
Supply only for carrying out repairs under item No.219.00 above with electronic driver 15/18W suitable for 15/18 W LED light fittings complete all as specified and directed.
20
-
-
Supply only for carrying out repairs under item No.219.00 above with electronic driver 9/12W suitable for 9/12 W LED light fittings complete all as specified and directed.
20
-
-
Supply only for carrying out repairs under item No.219.00 above with LED tube light fitting, 1x18 w, 230v. Surface and wall mounted LED batten, 2100lm PC Body tube housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver. & connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge.
50
-
-
Supply only for carrying out repairs under item No.219.00 above with LED tube light fitting, 1x20 w, 230v .Surface and wall mounted LED batten, elegant dia cast for designer homes bright LED source with uniform light out put , 2400 lm , surge protection of 2 KV with wide voltage protection 160-360 V in provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver. & connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge.
50
-
-
Supply only for carrying out repairs under item No.219.00 above with LED tube light fitting, 1x23 w, 230v .Surface and wall mounted LED batten, elegant dia cast aluminium batten for designer homes bright LED source with uniform light out put , 2400 lm , surge protection of 2 KV with wide voltage protection 160-360 V in provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver. & connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge.
45
-
-
Supply only for carrying out repairs under item No.219.00 above with in replacement LED light fitting, mirror light 1x10 w, 230v fitted on wall/surface including all accessories complete all as specified and directed by Engineer-in-Charge.
35
-
-
Supply only for carrying out repairs under item No.219.00 above with LED light fitting, 1x33 w, 230v .2x2 recessed mounted genaral purpose squre shaped luminaire with high transmitivity diffuser suitable for office application with profiled & flat diffuser fiited on ceiling connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge.
15
-
-
Supply only for carrying out repairs under item No.219.00 above with LED light fitting, 1x12 w, 230v .down light recessed mounted genaral purpose squre/round shaped luminaire with high transmitivity diffuser suitable for office application with profiled & flat diffuser fiited on ceiling connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge.
20
-
-
Supply only for carrying out repairs under item No.219.00 above with fan regulator 120W, 2 module modular type as per existing make and model complete all as specified and directed by Engineer-in-Charge.
15
-
-
Supply only for carrying out repairs under item No.219.00 above with LED tube light fitting. flameproof type FLP-WP of T5 2x20W including integral reflector made of alluminium alloy LM6, with electronic ballast, bipin holders, connector block, etc., and all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor complete all as specified and directed by Engineer-in-Charge.
2
-
-
Supply only for carrying out repairs under item No.219.00 above withSupply only LED tube light fitting. flameproof type FLP-WP of T5 1X20 W including integral reflector made of alluminium alloy LM6, with electronic ballast, bipin holders, connector block, etc., and all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor complete all as specified and directed by Engineer-in-Charge.
2
-
-
Supply only for carrying out repairs under item No.219.00 above with flameproof Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed by Engineer-in-Charge.
2
-
-
Supply only for carrying out repairs under item No.219.00 above with flameproof 1Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A,250V, 2P+earth complete all as specified and directed by Engineer-in-Charge.
2
-
-
Supply only for carrying out repairs under item No.219.00 above with for carrying out repairs under item No.216 above with alluminium service wire 6sqmm 2 core 1100 volts grade fixed on wall/roof etc complete all as specified and directed by Engineer-in-Charge.
45
-
-
Supply only for carrying out repairs under item No.219.00 above with LED lamp, B 22, 9W 220V 50HZ complete all as specified and directed by Engineer-in-Charge.
25
-
-
Supply only for carrying out repairs under item No.219.00 above with LED lamp, B 22, 12W 220V 50HZ complete all as specified and directed by Engineer-in-Charge.
21
-
-
Supply only for carrying out repairs under item No.219.00 above with Modular switch 1 way 6A, 220V 50Hz 1module as per existing make and model complete all as specified and directed by Engineer-in-Charge.
25
-
-
Supply only for carrying out repairs under item No.219.00 above with Modular switch 1 way 16A, 220V 50Hz 1module as per existing make and model complete all as specified and directed by Engineer-in-Charge.
25
-
-
Supply only for carrying out repairs under item No.219.00 above with Modular switch 2 way 6A, 220V 50Hz 1module as per existing make and model complete all as specified and directed by Engineer-in-Charge.
25
-
-
Supply only for carrying out repairs under item No.219.00 above with Modular bell push 6A, 220V 50Hz 1module as per existing make and model complete all as specified and directed by Engineer-in-Charge.
10
-
-
Supply only for carrying out repairs under item No.219.00 above with Socket, 6A - 2/3 pin combined ,220V 50Hz 2module as per existing make and model complete all as specified and directed by Engineer-in-Charge.
25
-
-
Supply only for carrying out repairs under item No.219.00 above with Socket, 16A - 2/3 pin combined ,220V 50Hz 2module as per existing make and model complete all as specified and directed by Engineer-in-Charge.
30
-
-
Supply only for carrying out repairs under item No.219.00 above with Fan step regulator, 120W - 1/2 module ,220V 50Hz as per existing make and model complete all as directed at site.
25
-
-
Supply only for carrying out repairs under item No.219.00 above with White cover plate with frame,1 module as per existing make and model complete all as specified and directed by Engineer-in-Charge.
5
-
-
Supply only for carrying out repairs under item No.219.00 above with White cover plate with frame,2 module as per existing make and model complete all as specified and directed by Engineer-in-Charge.
5
-
-
Supply only for carrying out repairs under item No.219.00 above with White cover plate with frame,3 module as per existing make and model complete all as specified and directed by Engineer-in-Charge.
5
-
-
Supply only for carrying out repairs under item No.219.00 above with White cover plate with frame,4 module as per existing make and model complete all as specified and directed by Engineer-in-Charge.
5
-
-
Supply only for carrying out repairs under item No.219.00 above with White cover plate with frame,6 module as per existing make and model complete all as specified and directed by Engineer-in-Charge.
5
-
-
Supply only for carrying out repairs under item No.219.00 above with metal flux box 1/2 module as per existing make and model complete all as specified and directed by Engineer-in-Charge.
5
-
-
Supply only for carrying out repairs under item No.219.00 above with metal flux box 4 module as per existing make and model complete all as specified and directed by Engineer-in-Charge.
5
-
-
Supply only for carrying out repairs under item No.219.00 above with metal flux box 6 module as per existing make and model complete all as specified and directed by Engineer-in-Charge.
5
-
-
Supply only for carrying out repairs under item No.219.00 above with Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings as per existing make and model complete all as specified and directed by Engineer-in-Charge.
15
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements