Military Engineer Services Tender

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc made out of Fe 410-W (Gde E-250 quality A) complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth not otherwise described and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

S&F of Fibre glass 2mm thick reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

S&F hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps, racks including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or FE 310-0 complete all as specified and directed.

M&L for Hardcore of gauge n exc. 63 mm, broken stone or boulders deposited, spread and levelled in layers n exc.15 cm thick, watered and rammed to a true surface as specified and directed.

M&L for PCC 1:2:4, Type B1, 100 mm thick using 20mm graded stone aggregate, concrete surface furnished even and smooth without using extra cement as in hard standing complete all as specified and directed.

M&Lpre-cast cement concrete masonry in PCC 1:3:6 type C1 using 20mm graded aggregte with solid block, exceeding 10cm in width and setting in CM 1:4 complete all as specified and directed.

M&L for Rendering 10 mm thick using CM 1:4 on fair faces of brick work or concrete surfaces and making the surface even and smooth (without using extra cement) complete all as specified and directed.

M&L for preparation of new plasetred walls and applying two coats of cement based paint complete all as specified and directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Excavation in trenches, n .exc 1.5m wide and n.exc 1.5m in depth, for foundation etc. or for shafts, wells, cesspits, manholes, per ,pier holes, etc. n.exc 10 sq m onl plan and n. exc 1.5m in depth and getting out all aspecifed and directed.

Excavation in trenches, n .exc 1.5m wide and exc 1.5m in depth, for foundation etc. or for shafts, wells, cesspits, manholes, per ,pier holes, etc. n.exc 10 sq m onl plan and exc 1.5m in depth and getting out in soft/loose soil all aspecifed and directed.

Returing , filling, including spreading, levelling, watering and well ramming in layers not exc 25cm.all aspecifed and directed.

M&L Cement concrete in foundation, filling and mass concrete type using 20mm aggregate grade type 1:3:6, Type-C1 all aspecifed and directed.by Engr-in-charge.

M&L for Point wiring with casing caping controlled by one switch with 1.50 Sqmm (nominal area) FRLSH, PVC insulated 1100 volts grade multi stranded copper conductor single core unsheathed cable and FRLSH, ISI marked, PVC insulated 1100 volts grade multi stranded copper conductor single core of size 1.50 Sqmm as earth continuity conductor connected to common earth dolly, with all fittings, ISI marked and accessories, the casing and caping shall be fixed with clamping and shadle including provision of mild steel terminal boxes/PVC Gangbox/Sunken boxes of suitable size made with 1.6 mm thick mild steel sheet recessed in wall with a coat of black bituminus paint and providing of with 3mm thick bakelite/PVC sheet ISI marked top cover , suitable for fixing of switches / sockets / regulators etc. fixed in recess of wall with brass chromium plated screws and cap washer complete all as specified and directed for the following :-

One light point controlled by one way switch 5/6 amps.

One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps.

One socket out let 5/6 amps point on the independent board

All as per item No 19 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board

S&F switch piano flush type 5/6 amps single pole one way all as specified.

S&F of switch socket combination 2 in 1, 5 Pin 5/15 Amp multipurpose 230 volt flush type complete all as specified and directed .

S&F of switch socket combination 2 in 1, 3 Pin 5 Amp multipurpose 230 volt flush type complete all as specified and directed.

S&F ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and directed.

S&F Sheet metal enclosure for 6 way Distribution Boards (DB’s), vertical type double door, single pole and neutral with 200 amps rated bus bar, IP-43 protection suitable for fixing MCB"S/lsolators with and incl blanking plates complete all as specified and as directed.

S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), vertical type double door, triple pole and neutral with 200 amps rated bus bar, IP-43 protection suitable for fixing MCB"S/lsolators with and incl blanking plates complete all as specified and as directed.

S&F of MCCB, 4 pole 40 amps, 415 volts, 16KA all complete as specified and as directed.

S&F of MCB, Single pole and neutral 32 amps, 240 volts, ‘C’ curve, 10KA in existing panel all complete as specified and as directed.

S&F MCB, Single pole, 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete as specified and as directed.

M&L for earthing complete with Galvanised steel earth plate eletrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filled in alternate layers and electrode connections by using Galvanised iron strip 32 x 6 mm connected by means of bolts, nuts, check nuts and washer of galvanised iron or steel, provision of 40 mm dia GI pipe light grade for protection of GI iron strip 32 x 6 mm up tp 7.5m length and 20 mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type C1 chamber, MS funnel, wire mesh, 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50 mtr, provision of charcoal and salt complete all as shown in electrical plate No 3 of schedule Part-I

M&L for earthing complete with Galvanised steel earth plate eletrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filled in alternate layers and electrode connections by using Galvanised earth lead wire 4 mm connected by means of bolts, nuts, check nuts and washer of galvanised iron or steel, provision of 20 mm dia GI pipe light grade for protection of GI earth lead wire 4 mm dia up tp 7.5m length and 20 mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type C1 chamber, MS funnel, wire mesh, 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50 mtr, provision of charcoal and salt complete all as shown in electrical plate No 3 of schedule Part-I

S & F LED light fitting including LED bulb/tube energy efficient surface and wall mounted LED batten 20 Watt, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver, diffuser technology to ensure minimum loss in light transmitted, long life complete all as specified and as directed.

Supply and Fix Street Light fitting GI bracket suitable for fixing of street light fitting by fabricating the size of 32 mm dia Light grade GI pipe of length 1.5 mtr and suitable bend,complete all as specified and directed.

Supply and fix new generation energy saving and environmental friendly 35 watt building light fitting long life versatile pressure die cast aluminium IP66 road way luminaire with high power LEDs as light and electronic driver complete all as specified and directed.

S&F exhaust fan AC single phase Heavy Duty steel body Exhaust Fans 300 mm Sweep 1400 RPM complete with louvers including fixing/grouting of frame in wall opening complete & connecting with & including 3 single core PVC insulated copper conductor flexible cable of size 23/0.0076 (or equivalent, size in mm) complete all as specified and directed.

M&L for sub main wiring for A/C using two single core PVC insulated FRLSH cable 6 sqmm copper conductor multi stranded insulated cable using and earth wire and drawing into PVC casing caping of suitable size and connecting terminal ends including provision of FRLSH single core 6 sqmm insulated copper cable for earth continuity conductor and connecting to earth dolly and taking down complete. Note : Three runs of cable and one run of casing and caping shall be measured as one unit.

M & L Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 25 Amp Capacity complete all as specified and directed.

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum BEE 4 star rating and EER 3.2 of capacity 2 TR including providing wall stand for fixing outdoor unit and providing copper pipe upto 6 RM all as specified and directed

S&F wall mounted type voltage stabilizer for automatic operation naturally air cooled indoor type 5 KVA capacity single phase- 220 Volts 50 HZ AC supply for voltage correction up to 170-260 Volts with accuracy of +/- 2.5% tolerance and with provision of protection relays including fixing accessories connection testing etc complete all as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core complete all as specified and directed

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified and directed

Supply and fix steel tubular swaged poles of 410 SP22 (9 metre) complete with CI base plate and final taper plug, bolts, nuts & srews including foundation and coping also one coat of red oxide paint and two coats of aluminium paint above coping portion including providing coping in cement concrete PCC 1:3:6 type C1 (using 20mm graded aggregates) including form work of size 45cm x 45cm x 50cm with top tapering complete all as specified and direcetd.

Supply and fix LT junction box for street light, sheet moulding compound (SMC) type with hinged type door and locking arrangement, off white colour, of size 130 x 180 x 77mm (internal) comprising 6 Amps MCB, 01 No bakelite base neutral link and 01 No earthing terminal bolt and nut and connecting up cables with aluminium terminal lugs incl fixing arrangements all as specified and as directed.

S&F medium grade GI pipe bracket 40mm bore of length not less than 1.20M, bent to shape and fixed to poles/ wall with two No MS flat clamps etc. duly painted with two coats of aluminium paint over a coat of zinc chrome primer complete all as specified and directed

Supply and laying of DWC (Double corrugated) HDPE pipe ISI marked IS-14390 Part-ll, of outer dia 50mm and inner dia 38mm with smooth internal and profied external surface for non pressure under ground cable including all connected accessories like coupler "O" ring etc, for protection of cable complete all aspecited and directed.by Engr-i

Supply and fixing LED type street light fitting 1x 60 W, pressure die cast aluminium housing with heat resistant toughened glass & IP 66 protection complete with connecting up with wiring and testing on completion complete all as specified and directed

Supply, install, testing and commissioning Out door type of factory fabricated LT panel made out of 3.15 mm thick CRCA sheet and angle iron of size 40 x 40 x 5 mm floor mounted type with Aluminium bus bar of capacity 300 Amp- 4 Nos including two coats of spary synthetic enamel paint over a coat of red oxide, including voltmeter, ammeter, with necessary CTs & PTs, selector switches, phase indication lamps for three phase system, control panel & power panel wiring, cable alleys at both side, confirming to IS:8623, IEC:60439 & CPRI Approved, protection class IP65 with the accessories housing with the following switch gears:- (a) 4 Pole MCCB 63 Amp, 50 Hz, 415 V with rupturing capacity 25 KA - 01 Nos (b) MCB TPN 32 Amp, 50 Hz, 415 V with rupturing capacity 10 KA - 02 Nos (c) MCB SPN 20 Amp, 50 Hz, 415 V with rupturing capacity 10 KA - 01 Nos (d) Timer-01 Nos(Dusk to Dawn mode) and contactor-01 Nos of 25 Amps size

S&F of MCCB, 4 pole 40 amps, 415 volts, 10KA all complete as specified and as directed.