Military Engineer Services Tender

M & L for Forming Expansion Joint, 12mm thick, filled with Preformed Bituminous Filler and top 30mm Primed and sealed with Sealing Compound Grade "B" for 100mm thick slab complete all as specified and as directed.

Dismantling of Floor, Hearth or Wall Tiling of any description including Cement Mortar bedding [but not backing] and removing serviceable tiles to the stores and removing rubbish / debris to a distance not exceeding 1.50 KM complete all as specified and as directed.

M & L for Chequered Cement Concrete Tiles of size 300 X 300 mm, 25mm thick, Hydraulically pressed as in Floors, set jointed and pointed in neat grey cement slurry and coloured cement to match including screed bed or bedding layer of mortar 20 mm thick in Cement Mortar 1:4 complete all as specified and as directed.

M & L for Periodical Cleaning / Desilting of existing of Runway Cross Drains [Closed / Open] or Drains adjacent to Runway of any Cross Section and any Depth, in any condition including Foul Condition, by desilting Silt, Grit, Mud, Debris, Sludge Deposits, Pebbles, Stones, Vegetation, Waste Material Deposits etc. including bailing out water by mechanical pump as required etc., temporary diversion of drain water as required, Cleaning / Removing Manually / Mechanically for Smooth / Free flow of Drainage water etc. and removing the Materials / Debris / Spoil to a distance exceeding 1.5 KM and not exceeding 5 KM and depositing in low laying areas Outside the MD Land including removing and replacing cover slabs if required complete all as specified and as directed.

Note for Serial Item No. 7: The rate quoted shall be deemed to be considering following provisions and nothing shall be paid extra on this account. [a] The work shall be executed as and when required basis / urgent basis for smooth / free flow of rain water etc. during any season or whether conditions or at any time during the day or night as ordered as required at site. [b] The rate quoted is deemed to including the cost of dewatering as required in any condition including foul condition, all the tools and plant as required, removing and replacing in position existing cover slabs of any description without disturbing the existing drains. Nothing shall be paid extra on this account. [c] Usually, the labour when ordered shall report at site for cleaning of drain within 02 Hours and the blockage shall be cleared on the same day. Failing which a penalty @ ₹ 3,000.00 Per 08 Hours shall be levied and the decision of GE shall be final and binding. [d] It shall be ensured that the stretch of drain cleaned under the subject contract shall not required to be cleaned within three months from the date of cleaning. Under extreme circumstances, if the drain is required to be cleaned within three months from the date of previous cleaning, the same shall be carried out under specific written orders of the GE.

M & L for PCC 1:2:4, Type B-1 [using 20 mm graded granite stone aggregate] in surface channels and drains complete all as specified and as directed.

Demolition of Brick / Stone Masonry built in Cement Mortar including all quoins arches pillars etc and removing rubbish to a distance not exceeding 1.50 KM complete all as specified and as directed.

M & L for Providing Precast Cement Concrete Solid Block Masonry of 1:3:6, Type C1 using 20mm graded stone aggregate exceeding 100mm width with plain or interlocking joints set in Cement Mortar 1:4 complete all as specified and as directed.

M & L for rendering to brick / concrete surfaces, 15 mm thick in Cement Mortar 1:4, surfaces finished fair and even without using extra cement, complete all as specified and as directed.

Demolition of Reinforced Cement Concrete [reinforcement cut as required to facilitate demolition] of any description and in any position not otherwise specifically provided for and removing rubbish to a distance not exceeding 1.50 KM complete all as specified and as directed.

S & F Reinforcement using High Strength Corrosion Resistant Deformed TMT Bars of Grade Fe–500D of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

M & L for providing Precast RCC 1:2:4, Type B-1 using 20mm graded stone aggregate as in landings, cover slabs [for manholes etc], water troughs and similar articles with plain faces set in cement mortar 1:6 complete all as specified and as directed.

M & L for preparation of existing bituminous / concrete surfaces of all dirt, scales, oil grease and foreign materials etc. and Painting Lines, Dashes, Arrows, Letters, etc. on Road, Pavements and the like exceeding 10cm width or girth with One Coat Water based Acrylic Runway marking paint of colour White or Golden Yellow complete all as specified and as directed.

M & L for preparation of existing surfaces of Taxiway Marking and Turning Pads of Runway surfaces of all dirt, scales, oil grease and foreign materials etc. and Painting Lines, Dashes, Arrows, Letters, etc. and the like exceeding 10cm width or girth [Retro Reflective Type] of colour Yellow with White or Black Borders, Cold applied type, applied by skilled painter / applicator of wet film thickness of 400 microns in single coat and dry film thickness of 200 micron and coverage @ the rate of 0.4 to 0.5 Litres per Square Metre and application of drop on Glass Beads Type IV [Reflective Index 1.5] @ 350 Grams per Square Metre complete all as specified and as directed.

M & L for washing, rubbing down and stopping of old painted surfaces and applying One coat of Weather Proof Exterior Emulsion Paint [100% Acrylic] [red/white/yellow] in Pattern with approved shade and size of any description over 10cm girth or width complete all as specified and as directed.

S & F in repairs DTGM Boards made of Black Acrylic Sheet 4 to 5 mm with 6 Nos of 100mm dia Air Pressure clearance Holes per Board including fixing the Board to Frame Work made up of Heavy Duty PVC Pipes, The Frame shall consists of 03 Nos of 63 mm dia Heavy Duty PVC Pipes [Class - 5] confirming to IS - 4985 of 10 KGf / Sq.cm as in Vertical Post of approximate height of 1.28 m each duly covered at top with PVC Cap and inter connected at Top, Middle and Bottom with 25 mm dia Heavy Duty PVC Pipes [Class - 5] confirming to IS - 4985 of 10 KGf / Sq.cm with suitable reducer Tee Joints and jointed with PVC Solvent Cement, fixing the Acrylic Board with suitable PVC Bushes and Stainless Steel Screws, Washers and Nut & Bolts to PVC Pipes, inserting the frame in Suitable GI/MS Pipe embedded in PCC 1:2:4, Type B1 [using 20mm graded stone aggregate] of size 450 X 450 X 600mm, including necessary earthwork in any type of soil and removal of soil up to 50 metre, applying two coats of synthetic enamel paint over a coat of Zinc Chrome primer to MS Pipe complete all as specified and as directed.

S & F High Intensity Prismatic / Fluorescent Self Adhesive Radium Self Encapsulated Tape, Deep Orange Colour, as in letters [Black, Roman, Italic or Indian] including necessary Stops, Commas, Short Lines, Dashes, Brackets, etc., size of letters over 10cm width or girth complete all as specified and as directed.

Note for Serial Item No. 1.00 to 19.00: [a] The work shall be executed as and when required basis / urgent basis within the time limit as directed by the Engineer-in-Charge and Users during any season or whether conditions or at any time during the day or night as ordered / required at site and as directed by the Engineer-in-Charge and Users and nothing shall be paid extra on this account. [b] The work is required to be executed in highly restricted area along Main Runway. Therefore, the work shall be executed during Non-Flying Hours either during Day or Night without causing any disturbance for flying. Proper Safety Arrangement, equipment shall be provided by the contractor for workmen and nothing shall be paid extra on this account.