Andaman Lakshadweep Harbour Works Tender

Painting with Synthetic enamel paint of approved brand and manufacture of required colour to give an even shade as directed by EIC, including cost of paint, brush, scaffolding charges, transportation charges of all materials to work site all labour charges, minor tools labour cess & GST etc complete. a) Two or more coats on old work.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc.& including all labour charges ,transportation charges ,cost of minor tools ,GST, labour cess etc., complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface including all labour charges ,transportation charges ,cost of minor tools ,GST, labour cess etc., complete : Water thinnable cement prime

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour including all labour charges ,transportation charges ,cost of minor tools ,GST, labour cess etc., complete, as per manufacturer's specification

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) & including all labour charges ,transportation charges ,cost of minor tools ,GST, labour cess etc.,

Providing and fixing 12 mm thick pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc and including all labour charges, transportation charges, cost of minor tools, GST, labour cess etc complete as per architectural drawings and directions of Engineer-in-charge.

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation & including all labour charges ,transportation charges ,cost of minor tools ,GST, labour cess etc complete, including the cost of providing and fixing necessary 27.5 cm

Providing and fixing PVC (working pressure 4 kg per sqcm.) pipes in the kerb wall for cable line and air vent in ramp conforming to IS 4985 including jointing with seal ring conforming to IS 5382 leaving 10 mm gap for thermal expansion ( 3' mm dia) including all labour charges ,transportation charges ,cost of minor tools ,GST, labour cess etc

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required & including all labour charges ,transportation charges ,cost of minor tools ,GST, labour cess etc

Single half stall urinal with 5 litre P.V.C. automatic flushing cistern.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings including all labour charges ,transportation charges ,cost of minor tools ,GST, labour cess etc complete. A) 32 mm Semi rigid pipe

Providing and fixing Angle cock of approved quality including all labour charges ,transportation charges ,cost of minor tools ,GST, labour cess etc A) 15 mm nominal bore

Providing and fixing 10 ltr. low level P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures including all labour charges ,transportation charges ,cost of minor tools ,GST, labour cess etc., complete .

Providing and fixing Un plasticized PVC connection pipe with brass unions including cost of all materials all labour charges minor tools and plants GST etc., complete : A) 15 mm nominal bore